Your message dated Sat, 13 Sep 2014 23:21:07 +1000
with message-id <2168060.GPzSTZcnaI@debstor>
and subject line Done: [knutclient] An UPS Load of 0 (zero) causes the Load
graph to show up garbled
has caused the Debian Bug report #592552,
regarding [knutclient] An UPS Load of 0 (zero) causes the Load graph to show up
garbled
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
592552: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=592552
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: knutclient
Version: 0.9.5-1
Severity: normal
Hello.
I have noticed that if an UPS has a Load of 0, the corresponding graph in the
knutclient window will show up totally garbled. Here is my upsc output, and
the attached screenshots show how the problem graph looks in knutclient.
$ upsc apc-rs
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2009/11/23
battery.mfr.date: 2009/11/23
battery.runtime: 12456
battery.runtime.low: 120
battery.temperature: 29.2
battery.type: PbAc
battery.voltage: 13.6
battery.voltage.nominal: 12.0
device.mfr: American Power Conversion
device.model: Back-UPS RS 500
device.serial: NBxxxxxxxxxx
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.serial: NBxxxxxxxxxx
driver.version: 2.4.3
driver.version.data: APC HID 0.95
driver.version.internal: 0.34
input.sensitivity: high
input.voltage: 224.0
input.voltage.nominal: 230
output.voltage: 230.0
output.voltage.nominal: 2300.0
ups.beeper.status: disabled
ups.delay.shutdown: 20
ups.firmware: 30.j5.I
ups.firmware.aux: j5
ups.load: 0.0
ups.mfr: American Power Conversion
ups.mfr.date: 2007/11/16
ups.model: Back-UPS RS 500
ups.productid: 0002
ups.serial: NBxxxxxxxxxx
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.vendorid: 051d
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.35-rm1
Debian Release: squeeze/sid
900 testing natsu.i6
--- Package information. ---
Depends (Version) | Installed
==================================-+-================
kdelibs4c2a (>= 4:3.5.9) | 4:3.5.10.dfsg.1-3
libart-2.0-2 (>= 2.3.18) | 2.3.21-1
libaudio2 | 1.9.2-3
libc6 (>= 2.2.5) | 2.11.2-2
libfontconfig1 (>= 2.4.0) | 2.8.0-2.1
libfreetype6 (>= 2.2.1) | 2.4.0-2
libgcc1 (>= 1:4.1.1) | 1:4.4.4-8
libice6 (>= 1:1.0.0) | 2:1.0.6-1
libidn11 (>= 0.5.18) | 1.15-2
libjpeg62 | 6b1-1
libpng12-0 (>= 1.2.13-4) | 1.2.44-1
libqt3-mt (>= 3:3.3.8b) | 3:3.3.8b-7
libsm6 | 2:1.1.1-1
libstdc++6 (>= 4.1.1) | 4.4.4-8
libx11-6 | 2:1.3.3-3
libxcursor1 (>> 1.1.2) | 1:1.1.10-2
libxext6 | 2:1.1.2-1
libxft2 (>> 2.1.1) | 2.1.14-2
libxi6 | 2:1.3-4
libxinerama1 | 2:1.1-3
libxrandr2 (>= 2:1.2.99.2) | 2:1.3.0-3
libxrender1 | 1:0.9.6-1
libxt6 | 1:1.0.7-1
zlib1g (>= 1:1.1.4) | 1:1.2.3.4.dfsg-3
Package's Recommends field is empty.
Package's Suggests field is empty.
--
With respect,
Roman
signature.asc
Description: PGP signature
--- End Message ---
--- Begin Message ---
Package: knutclient
Version: 1.0.5-1
Seems to be fixed, closing...
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
