Your message dated Fri, 29 May 2015 17:37:08 +0000
with message-id <[email protected]>
and subject line Bug#762953: fixed in systemd 220-2
has caused the Debian Bug report #762953,
regarding no network after emergency mode
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
762953: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762953
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: systemd
Version: 215-4
Severity: normal
Hi,
Given a system with a non-essential crypt disk, which should be
unlocked on boot and mounted via /etc/fstab.
I then enter three times a wrong key and get dumped to emergency mode.
In emergency mode, the network seems fine.
I then exit emergency mode and get prompted for the cryptdisk key
again. This time, I enter the correct one, boot completes, and I can
log in on the console, but find the network gone.
Is that intended behavior?
Please note that a bunch of noauto was removed from fstab and crypttab
to force emergency mode for demonstration purposes.
Greetings
Marc
/etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/sid--test--vg-root / ext4 errors=remount-ro 0
1
/dev/mapper/rootcrypt /mnt/tempdisk ext4 defaults 0 0
# /boot was on /dev/vda1 during installation
UUID=3ec8d768-3eae-402f-9b10-9acbdc96d1c4 /boot ext2 defaults
0 2
/dev/mapper/sid--test--vg-swap_1 none swap sw 0
0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/etc/crypttab
# <target name> <source device> <key file> <options>
rootcrypt /dev/mapper/sid--test--vg-c_root none luks,discard
Console transcript
Loading Linux 3.16-2-amd64 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-2-amd64 ([email protected]) (gcc
version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16-2-amd64
root=/dev/mapper/sid--test--vg-root ro systemd.debug=1 console=ttyS0,57600n8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffe000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1fffe max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f1ae0-0x000f1aef] mapped at
[ffff8800000f1ae0]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x1fc00000-0x1fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1fbfffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] init_memory_mapping: [mem 0x1fe00000-0x1fffdfff]
[ 0.000000] RAMDISK: [mem 0x1ecfc000-0x1fb3dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F1950 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFFFB3C 000034 (v01 BOCHS BXPCRSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFFF177 000074 (v01 BOCHS BXPCFACP
00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFFE040 001137 (v01 BXPC BXDSDT
00000001 INTL 20130823)
[ 0.000000] ACPI: FACS 0x000000001FFFE000 000040
[ 0.000000] ACPI: SSDT 0x000000001FFFF1EB 000899 (v01 BOCHS BXPCSSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x000000001FFFFA84 000080 (v01 BOCHS BXPCAPIC
00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFFFB04 000038 (v01 BOCHS BXPCHPET
00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001fffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1fffdfff]
[ 0.000000] NODE_DATA [mem 0x1fff9000-0x1fffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1fff1001, primary cpu clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffdfff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s85824 r8192
d20672 u1048576
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1fc0e080
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 129159
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16-2-amd64
root=/dev/mapper/sid--test--vg-root ro systemd.debug=1 console=ttyS0,57600n8
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 489272K/523888K available (5188K kernel code, 941K
rwdata, 1824K rodata, 1196K init, 840K bss, 34616K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Detected 3214.344 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008000] Calibrating delay loop (skipped) preset value.. 6428.68 BogoMIPS
(lpj=12857376)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] ACPI: Core revision 20140424
[ 0.008213] ACPI: All ACPI Tables successfully acquired
[ 0.008878] Security Framework initialized
[ 0.009341] AppArmor: AppArmor disabled by boot time parameter
[ 0.009984] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010744] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.011687] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012082] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.012841] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.013796] Initializing cgroup subsys memory
[ 0.014303] Initializing cgroup subsys devices
[ 0.014813] Initializing cgroup subsys freezer
[ 0.016006] Initializing cgroup subsys net_cls
[ 0.016508] Initializing cgroup subsys blkio
[ 0.016990] Initializing cgroup subsys perf_event
[ 0.017530] Initializing cgroup subsys net_prio
[ 0.018091] mce: CPU supports 10 MCE banks
[ 0.018601] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.018601] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.018601] tlb_flushall_shift: -1
[ 0.020177] Freeing SMP alternatives memory: 20K (ffffffff81a18000 -
ffffffff81a1d000)
[ 0.023436] ftrace: allocating 21542 entries in 85 pages
[ 0.029264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.032002] smpboot: CPU0: AMD QEMU Virtual CPU version 1.7.1 (fam: 06,
model: 06, stepping: 03)
[ 0.036000] Performance Events: Broken PMU hardware detected, using software
events only.
[ 0.036000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[ 0.036000] x86: Booting SMP configuration:
[ 0.036003] .... node #0, CPUs: #1
[ 0.008000] kvm-clock: cpu 1, msr 0:1fff1041, secondary cpu clock
[ 0.048181] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.048826] x86: Booted up 1 node, 2 CPUs
[ 0.048797] KVM setup async PF for cpu 1
[ 0.048797] kvm-stealtime: cpu 1, msr 1fd0e080
[ 0.050099] smpboot: Total of 2 processors activated (12857.37 BogoMIPS)
[ 0.051385] devtmpfs: initialized
[ 0.054698] pinctrl core: initialized pinctrl subsystem
[ 0.056125] NET: Registered protocol family 16
[ 0.056730] cpuidle: using governor ladder
[ 0.057177] cpuidle: using governor menu
[ 0.057735] ACPI: bus type PCI registered
[ 0.058182] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.059034] PCI: Using configuration type 1 for base access
[ 0.072207] ACPI: Added _OSI(Module Device)
[ 0.072608] ACPI: Added _OSI(Processor Device)
[ 0.073113] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.073612] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.077013] ACPI: Interpreter enabled
[ 0.077566] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20140424/hwxface-580)
[ 0.078890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20140424/hwxface-580)
[ 0.080017] ACPI: (supports S0 S3 S4 S5)
[ 0.080576] ACPI: Using IOAPIC for interrupt routing
[ 0.081284] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.085734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.086617] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.087609] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.088075] acpi PNP0A03:00: fail to add MMCONFIG information, can't access
extended PCI configuration space under this bridge.
[ 0.089575] acpiphp: Slot [3] registered
[ 0.090015] acpiphp: Slot [4] registered
[ 0.090484] acpiphp: Slot [5] registered
[ 0.090923] acpiphp: Slot [6] registered
[ 0.091382] acpiphp: Slot [7] registered
[ 0.092018] acpiphp: Slot [8] registered
[ 0.092471] acpiphp: Slot [9] registered
[ 0.092915] acpiphp: Slot [10] registered
[ 0.093371] acpiphp: Slot [11] registered
[ 0.093822] acpiphp: Slot [12] registered
[ 0.094266] acpiphp: Slot [13] registered
[ 0.094723] acpiphp: Slot [14] registered
[ 0.095177] acpiphp: Slot [15] registered
[ 0.095631] acpiphp: Slot [16] registered
[ 0.096017] acpiphp: Slot [17] registered
[ 0.096475] acpiphp: Slot [18] registered
[ 0.096921] acpiphp: Slot [19] registered
[ 0.097370] acpiphp: Slot [20] registered
[ 0.097820] acpiphp: Slot [21] registered
[ 0.098259] acpiphp: Slot [22] registered
[ 0.098693] acpiphp: Slot [23] registered
[ 0.099139] acpiphp: Slot [24] registered
[ 0.099600] acpiphp: Slot [25] registered
[ 0.100018] acpiphp: Slot [26] registered
[ 0.100469] acpiphp: Slot [27] registered
[ 0.100909] acpiphp: Slot [28] registered
[ 0.101349] acpiphp: Slot [29] registered
[ 0.101827] acpiphp: Slot [30] registered
[ 0.102268] acpiphp: Slot [31] registered
[ 0.102699] PCI host bridge to bus 0000:00
[ 0.103142] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.104002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.104655] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.105301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.106026] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff]
[ 0.112038] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.112881] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.113590] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.114350] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.120391] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 0.121176] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.155036] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.155699] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.156240] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.156978] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.157658] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.158296] acpi LNXCPU:00: Invalid PBLK length [0]
[ 0.158886] acpi LNXCPU:01: Invalid PBLK length [0]
[ 0.159582] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.160121] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.160890] vgaarb: loaded
[ 0.161188] vgaarb: bridge control possible 0000:00:02.0
[ 0.161802] PCI: Using ACPI for IRQ routing
[ 0.162517] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.163282] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.164153] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.168089] Switched to clocksource kvm-clock
[ 0.173095] pnp: PnP ACPI init
[ 0.173932] ACPI: bus type PNP registered
[ 0.175082] pnp: PnP ACPI: found 7 devices
[ 0.175546] ACPI: bus type PNP unregistered
[ 0.191450] NET: Registered protocol family 2
[ 0.192900] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.194401] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.195586] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.196289] TCP: reno registered
[ 0.196640] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.197259] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.198175] NET: Registered protocol family 1
[ 0.198659] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.199302] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.199920] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.200842] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.202039] Unpacking initramfs...
[ 0.409783] Freeing initrd memory: 14600K (ffff88001ecfc000 -
ffff88001fb3e000)
[ 0.410795] microcode: AMD CPU family 0x6 not supported
[ 0.412372] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.415166] audit: initializing netlink subsys (disabled)
[ 0.417674] audit: type=2000 audit(1411737673.153:1): initialized
[ 0.421246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.423464] zbud: loaded
[ 0.424287] VFS: Disk quotas dquot_6.5.2
[ 0.424796] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.425599] msgmni has been set to 984
[ 0.426918] alg: No test for stdrng (krng)
[ 0.427334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.428104] io scheduler noop registered
[ 0.428536] io scheduler deadline registered
[ 0.429085] io scheduler cfq registered (default)
[ 0.429716] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.430333] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.431108] GHES: HEST is not enabled!
[ 0.431587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.454679] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 0.455844] Linux agpgart interface v0.103
[ 0.456451] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 0.457886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.458456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.459033] mousedev: PS/2 mouse device common for all mice
[ 0.459866] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.460981] rtc_cmos 00:00: RTC can wake from S4
[ 0.461705] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.462507] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.463352] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.464067] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 0.464770] AMD IOMMUv2 functionality not available on this system
[ 0.465500] TCP: cubic registered
[ 0.466073] NET: Registered protocol family 10
[ 0.466958] mip6: Mobile IPv6
[ 0.467313] NET: Registered protocol family 17
[ 0.467802] mpls_gso: MPLS GSO support
[ 0.468438] registered taskstats version 1
[ 0.469421] rtc_cmos 00:00: setting system clock to 2014-09-26 13:21:12 UTC
(1411737672)
[ 0.471777] Freeing unused kernel memory: 1196K (ffffffff818ed000 -
ffffffff81a18000)
[ 0.472692] Write protecting the kernel read-only data: 8192k
[ 0.475473] Freeing unused kernel memory: 944K (ffff880001514000 -
ffff880001600000)
[ 0.476881] Freeing unused kernel memory: 224K (ffff8800017c8000 -
ffff880001800000)
Loading, please wait...
[ 0.542336] systemd-udevd[60]: starting version 215
[ 0.544334] random: systemd-udevd urandom read with 2 bits of entropy
available
[ 0.551831] SCSI subsystem initialized
[ 0.554155] ACPI: bus type USB registered
[ 0.555646] usbcore: registered new interface driver usbfs
[ 0.557681] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.559012] usbcore: registered new interface driver hub
[ 0.561142] usbcore: registered new device driver usb
[ 0.562970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.567309] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.568280] scsi0 : ata_piix
[ 0.568935] scsi1 : ata_piix
[ 0.569315] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.570038] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.571108] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.574148] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.574687] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus
number 1
[ 0.575805] uhci_hcd 0000:00:01.2: detected 2 ports
[ 0.577019] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
[ 0.578355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.579597] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.580645] usb usb1: Product: UHCI Host Controller
[ 0.581043] FDC 0 is a S82078B
[ 0.581963] usb usb1: Manufacturer: Linux 3.16-2-amd64 uhci_hcd
[ 0.582702] usb usb1: SerialNumber: 0000:00:01.2
[ 0.583342] hub 1-0:1.0: USB hub found
[ 0.584179] hub 1-0:1.0: 2 ports detected
[ 0.597468] vda: vda1 vda2 < vda5 >
[ 0.725372] ata2.00: ATAPI: QEMU DVD-ROM, 1.7.1, max UDMA/100
[ 0.728099] ata2.00: configured for MWDMA2
[ 0.731906] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.7.
PQ: 0 ANSI: 5
[ 0.744818] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 0.745547] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.747496] sr 1:0:0:0: Attached scsi generic sg0 type 5
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [
0.827439] device-mapper: uevent: version 1.0.3
[ 0.828616] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
[email protected]
[ 0.896130] usb 1-1: new full-speed USB device number 2 using uhci_hcd
done.
Begin: Running /scripts/local-premount ... [ 0.931679] PM: Starting manual
resume from disk
done.
[ 0.944068] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 1.010941] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 1.014131] systemd[1]: Detected virtualization 'kvm'.
[ 1.015278] systemd[1]: Detected architecture 'x86-64'.
Welcome to Debian GNU/Linux jessie/sid!
[ 1.026752] systemd[1]: Inserted module 'autofs4'
[ 1.028871] systemd[1]: Set hostname to <sid-test>.
[ 1.064745] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 1.065800] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 1.066836] usb 1-1: Product: QEMU USB Tablet
[ 1.067607] usb 1-1: Manufacturer: QEMU
[ 1.068505] usb 1-1: SerialNumber: 42
[ 1.109626] systemd[1]: Cannot add dependency job for unit
display-manager.service, ignoring: Unit display-manager.service failed to load:
No such file or directory.
[ 1.111741] systemd[1]: Starting Forward Password Requests to Wall Directory
Watch.
[ 1.112728] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 1.113629] systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
[ 1.115490] systemd[1]: Starting Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 1.118931] systemd[1]: Reached target Remote File Systems (Pre).
[ 1.120415] systemd[1]: Starting Arbitrary Executable File Formats File
System Automount Point.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 1.125265] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 1.127691] systemd[1]: Starting Dispatch Password Requests to Console
Directory Watch.
[ 1.131560] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 1.132880] systemd[1]: Starting Paths.
[ OK ] Reached target Paths.
[ 1.134900] systemd[1]: Reached target Paths.
[ 1.135807] systemd[1]: Expecting device
dev-mapper-sid\x2d\x2dtest\x2d\x2dvg\x2dswap_1.device...
Expecting device dev-mapper-sid\x2d\x2dtest\x2d\x2dv...wap_1.device...
[ 1.138779] systemd[1]: Expecting device
dev-mapper-sid\x2d\x2dtest\x2d\x2dvg\x2dc_root.device...
Expecting device dev-mapper-sid\x2d\x2dtest\x2d\x2dv..._root.device...
[ 1.141926] systemd[1]: Expecting device dev-mapper-rootcrypt.device...
Expecting device dev-mapper-rootcrypt.device...
[ 1.144348] systemd[1]: Expecting device
dev-disk-by\x2duuid-3ec8d768\x2d3eae\x2d402f\x2d9b10\x2d9acbdc96d1c4.device...
Expecting device dev-disk-by\x2duuid-3ec8d768\x2d3ea...6d1c4.device...
[ 1.147384] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 1.152136] systemd[1]: Created slice Root Slice.
[ 1.152750] systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 1.154470] systemd[1]: Created slice User and Session Slice.
[ 1.155154] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 1.157136] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.157981] systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
[ 1.159584] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.160339] systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 1.162368] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.163095] systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 1.164750] systemd[1]: Listening on Syslog Socket.
[ 1.165491] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 1.168381] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.169125] systemd[1]: Starting LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 metadata daemon socket.
[ 1.170894] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.171662] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 1.173214] systemd[1]: Listening on udev Control Socket.
[ 1.173974] systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 1.175502] systemd[1]: Listening on udev Kernel Socket.
[ 1.176218] systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
[ 1.177852] systemd[1]: Listening on Journal Socket.
[ 1.178442] systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
[ 1.180208] systemd[1]: Created slice System Slice.
[ 1.180919] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 1.182929] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 1.185634] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.186540] systemd[1]: Starting system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 1.189037] systemd[1]: Created slice system-getty.slice.
[ 1.189848] systemd[1]: Starting system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 1.192898] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 1.195156] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 1.198395] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
Starting Create list of required static device nodes...rrent kernel...
[ 1.203781] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 1.206446] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[ OK ] Created slice system-systemd\x2dcryptsetup.slice.
[ 1.209869] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 1.211580] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.212642] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 1.215291] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 1.217733] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 1.220470] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ OK ] Started Journal Service.
[ 1.224204] systemd[1]: Started Journal Service.
[ OK ] Reached target Slices.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Create list of required static device nodes ...current kernel.
Starting Create Static Device Nodes in /dev...
Starting Apply Kernel Variables...
[ OK ] Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ 1.257437] systemd-fsck[143]: /dev/mapper/sid--test--vg-root: clean,
47341/121920 files, 323370/487424 blocks
[ OK ] Started File System Check on Root Device.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ 1.296584] systemd-udevd[169]: starting version 215
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap...
[ 1.329920] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.330979] ACPI: Power Button [PWRF]
[ 1.335121] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100,
revision 0
[ 1.339115] [drm] Initialized drm 1.1.0 20060810
[ 1.345672] parport_pc 00:04: reported by Plug and Play ACPI
[ 1.358116] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ OK ] Found device /dev/ttyS0.
[ 1.371255] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.380093] kvm: Nested Virtualization enabled
[ 1.381680] usbcore: registered new interface driver usbhid
[ 1.382492] usbhid: USB HID core driver
[ OK ] Created slice system-lvm2\x2dpvscan.slice.
Starting LVM2 PV scan on device 254:5...
[ OK ] Created slice system-ifup.slice.[ 1.409365] input: QEMU QEMU USB
Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[ 1.410969] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.411880] ppdev: user-space parallel port driver
[ OK ] Started LVM2 PV scan on device 254:5.
[ OK ] Found device /dev/disk/by-uuid/3ec8d768-3eae-402f-9b10-9acbdc96d1c4.
[ OK ] Found device /dev/mapper/sid--test--vg-swap_1.
Activating swap /dev/mapper/sid--test--vg-swap_1...
Starting File System Check on /dev/disk/by-uuid/3ec8...9acbdc96d1c4...
[ 1.448268] Adding 217084k swap on /dev/mapper/sid--test--vg-swap_1.
Priority:-1 extents:1 across:217084k FS
[ OK ] Activated swap /dev/mapper/sid--test--vg-swap_1.
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Activation of LVM2 logical volumes...
Starting Copy rules generated while the root was ro...
[ OK ] Reached target Swap.
[ 1.471754] systemd-fsck[235]: /dev/vda1: clean, 332/62248 files,
59994/248832 blocks
[ OK ] Started File System Check on /dev/disk/by-uuid/3ec8d...0-9acbdc96d1c4.
[ OK ] Started Copy rules generated while the root was ro.
[ OK ] Started Activation of LVM2 logical volumes.
[ OK ] Found device /dev/mapper/sid--test--vg-c_root.
Starting Cryptography Setup for rootcrypt...
Starting Dispatch Password Requests to Console...
[ OK ] Started Dispatch Password Requests to Console.
Starting Activation of LVM2 logical volumes...
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on
/mnt/tempdisk! [ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems...
[ 1.536957] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Activation of LVM2 logical volumes.
[ 1.549599] EXT4-fs (vda1): mounting ext2 file system using the ext4
subsystem
[ 1.551480] EXT4-fs (vda1): mounted filesystem without journal. Opts: (null)
[ OK ] Mounted /boot.
[ 2.204723] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
*
[ 5.198927] NET: Registered protocol family 38
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on
/mnt/tempdisk! Starting Activation of LVM2 logical volumes...
[ OK ] Started Dispatch Password Requests to Console.
[ OK ] Started Activation of LVM2 logical volumes.
*
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on
/mnt/tempdisk! [ OK ] Started Dispatch Password Requests to Console.
Starting Activation of LVM2 logical volumes...
[ OK ] Started Activation of LVM2 logical volumes.
*
[FAILED] Failed to start Cryptography Setup for rootcrypt.
See 'systemctl status [email protected]' for details.
[DEPEND] Dependency failed for Encrypted Volumes.
[DEPEND] Dependency failed for /mnt/tempdisk.
[DEPEND] Dependency failed for Local File Systems.
[ OK ] Closed ACPID Listen Socket.
[ OK ] Stopped Getty on tty1.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Stopped Forward Password Requests to Wall.
[ OK ] Stopped target Graphical Interface.
[ OK ] Stopped target Multi-User System.
[ OK ] Stopped Deferred execution scheduler.
[ OK ] Stopped OpenBSD Secure Shell server.
[ OK ] Stopped Regular background program processing daemon.
[ OK ] Stopped /etc/rc.local Compatibility.
[ OK ] Stopped Login Service.
[ OK ] Reached target Login Prompts.
[ OK ] Stopped LSB: exim Mail Transport Agent.
[ OK ] Stopped D-Bus System Message Bus.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Stopped Permit User Sessions.
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
[ OK ] Stopped System Logging Service.
[ OK ] Stopped target Basic System.
[ OK ] Reached target Timers.
[ OK ] Stopped target System Initialization.
Starting Create Volatile Files and Directories...
Starting LSB: Raise network interfaces....
[ OK ] Closed Syslog Socket.
[ OK ] Reached target Sockets.
Starting Emergency Shell...
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
Starting Activation of LVM2 logical volumes...
[ OK ] Started Create Volatile Files and Directories.
[ 10.602744] systemd-journald[156]: Received request to flush runtime journal
from PID 1
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Activation of LVM2 logical volumes.
Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
[ OK ] Started Update UTMP about System Boot/Shutdown.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
[ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
[ OK ] Started LSB: Raise network interfaces..
Starting ifup for eth0...
[ OK ] Started ifup for eth0.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: RPC portmapper replacement...
[ OK ] Started LSB: RPC portmapper replacement.
[ OK ] Reached target RPC Port Mapper.
Starting LSB: NFS support files common to client and server...
[ 10.732245] RPC: Registered named UNIX socket transport module.
[ 10.733136] RPC: Registered udp transport module.
[ 10.733808] RPC: Registered tcp transport module.
[ 10.734496] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.738973] FS-Cache: Loaded
[ 10.745224] FS-Cache: Netfs 'nfs' registered for caching
[ 10.752650] Installing knfsd (copyright (C) 1996 [email protected]).
[ OK ] Started LSB: NFS support files common to client and server.
Starting LSB: Prepare console...
[ OK ] Started LSB: Prepare console.
Starting LSB: Set console font and keymap...
[ OK ] Started LSB: Set console font and keymap.
Welcome to emergGive root password for maintenance
(or type Control-D to continue):
root@sid-test:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 52:54:00:cd:0c:87 brd ff:ff:ff:ff:ff:ff
inet 192.168.19.21/24 brd 192.168.19.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2a01:238:4071:321d:5054:ff:fecd:c87/64 scope global mngtmpaddr dynamic
valid_lft 86398sec preferred_lft 14398sec
inet6 fe80::5054:ff:fecd:c87/64 scope link
valid_lft forever preferred_lft forever
root@sid-test:~# exit
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on
/mnt/tempdisk! ****
[ 20.774607] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 20.815950] systemd-journald[156]: Received request to flush runtime journal
from PID 1
Debian GNU/Linux jessie/sid sid-test ttyS0
sid-test login: root
Password:
Last login: Fri Sep 26 15:13:50 CEST 2014 on ttyS0
Linux sid-test 3.16-2-amd64 #1 SMP Debian 3.16.3-2 (2014-09-20) x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@sid-test:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group
default qlen 1000
link/ether 52:54:00:cd:0c:87 brd ff:ff:ff:ff:ff:ff
root@sid-test:~# [ 47.585254] random: nonblocking pool is initialized
[5/503]mh@fan:~$
-- Package-specific info:
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages systemd depends on:
ii acl 2.2.52-2
ii adduser 3.113+nmu3
ii initscripts 2.88dsf-53.4
ii libacl1 2.2.52-2
ii libaudit1 1:2.4-1
ii libblkid1 2.20.1-5.8
ii libc6 2.19-11
ii libcap2 1:2.24-6
ii libcap2-bin 1:2.24-6
ii libcryptsetup4 2:1.6.6-1
ii libgcrypt11 1.5.4-3
ii libkmod2 18-2
ii liblzma5 5.1.1alpha+20120614-2
ii libpam0g 1.1.8-3.1
ii libselinux1 2.3-2
ii libsystemd0 215-4
ii sysv-rc 2.88dsf-53.4
ii udev 215-4
ii util-linux 2.20.1-5.8
Versions of packages systemd recommends:
ii dbus 1.8.8-1
pn libpam-systemd <none>
Versions of packages systemd suggests:
pn systemd-ui <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: systemd
Source-Version: 220-2
We believe that the bug you reported is fixed in the latest version of
systemd, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Martin Pitt <[email protected]> (supplier of updated systemd package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Fri, 29 May 2015 18:54:09 +0200
Source: systemd
Binary: systemd systemd-sysv libpam-systemd libnss-myhostname libnss-mymachines
libsystemd0 libsystemd-dev libsystemd-login-dev libsystemd-daemon-dev
libsystemd-journal-dev libsystemd-id128-dev udev libudev1 libudev-dev udev-udeb
libudev1-udeb python3-systemd systemd-dbg
Architecture: source amd64
Version: 220-2
Distribution: unstable
Urgency: medium
Maintainer: Debian systemd Maintainers
<[email protected]>
Changed-By: Martin Pitt <[email protected]>
Description:
libnss-myhostname - nss module providing fallback resolution for the current
hostname
libnss-mymachines - nss module to resolve hostnames for local container
instances
libpam-systemd - system and service manager - PAM module
libsystemd-daemon-dev - systemd utility library (transitional package)
libsystemd-dev - systemd utility library - development files
libsystemd-id128-dev - systemd 128 bit ID utility library (transitional
package)
libsystemd-journal-dev - systemd journal utility library (transitional package)
libsystemd-login-dev - systemd login utility library (transitional package)
libsystemd0 - systemd utility library
libudev-dev - libudev development files
libudev1 - libudev shared library
libudev1-udeb - libudev shared library (udeb)
python3-systemd - Python 3 bindings for systemd
systemd - system and service manager
systemd-dbg - system and service manager (debug symbols)
systemd-sysv - system and service manager - SysV links
udev - /dev/ and hotplug management daemon
udev-udeb - /dev/ and hotplug management daemon (udeb)
Closes: 739676 740372 742048 748668 751707 755722 757367 758902 759320 759489
759515 760514 760616 762101 762343 762700 762953 764613 765577 766413 766429
766938 767267 768644 769186 771122 771397 771423 771498 771652 771739 771980
772182 772700 773302 773528 773533 774012 774335 775067 775093 775331 775404
775889 775903 776166 776170 776546 777115 777601 777613 778499 778654 778656
778700 778970 779169 779710 779902 780263 780650 781604 782265 782522 784720
784858
Changes:
systemd (220-2) unstable; urgency=low
.
* 220-1 was meant to go to experimental, but was accidentally uploaded to
unstable. This was planned for next week anyway, just not on a Friday;
we don't revert, but keep an RC bug open for a few days to get broader
testing. Reupload 220-1 with its changelog actually pointing to unstable
and with all versions in the .changes.
.
systemd (220-1) unstable; urgency=medium
.
[ Martin Pitt ]
* New upstream release:
- Ship sdio.ids and ids-update.pl in upstream tarball. (Closes: #780650)
- Drop non-working "journalctl /dev/sda" example from manpage
(Closes: #781604)
- man systemd.network: Explain UseDomains a bit more (not used by
default). (Closes: #766413)
- Ignore comments in /etc/hostname (LP: #766413)
- Drop all backported patches and port the others to new upstream release.
* Cherry-pick patch to fix udevd --daemon assertion regression.
* Cherry-pick patch to fix udevd worker hang.
* systemd.install: systemd.pc moved back into /usr/share/pkgconfig/.
* libsystemd0.symbols: Add new symbols from this release.
* Drop debian/extra/60-keyboard.hwdb for now. Upstream has a newer version,
and it's not nearly as often updated any more as it used to be.
* debian/rules: Remove shipped audit_type-to-name.h and
keyboard-keys-from-name.gperf and regenerate them during build (bug in
upstream 220 tarball).
* autopkgtest: Ship/use mock fsck from debian/tests, as it's missing in the
220 tarball.
* Add libnss-mymachines binary package. (Closes: #784858)
* Add libnss-myhostname binary package, taking over from the very old and
unmaintained standalone source package as per its maintainer's request.
(Closes: #760514)
* Drop buildsys-Don-t-default-to-gold-as-the-linker.patch and set LD in
debian/rules on sparc only. This can be dropped entirely once we build
GUdev from a separate source.
* bootchart autopkgtest: Skip test if /proc/schedstat does not exist, i. e.
the kernel is missing CONFIG_SCHEDSTAT. Bootchart requires this.
* systemd-fsckd autopkgtest: On Debian plymouth-start stays running, adjust
was_running() for that.
* systemd-fsckd autopkgtest: In test_systemd_fsck_with_plymouth_failure(),
fix plymouthd status check to work under both Debian and Ubuntu.
* Replace almost all of Fix-paths-in-man-pages.patch with upstreamed
patches. (The reminder is planned to get fixed upstream as well.)
* Remove our update-rc.d patches, replace them with upstream patches for
/lib/systemd/systemd-sysv-install abstraction, and provide one for
update-rc.d. Also implement "is-enabled" command by directly checking for
the presence of rcS or rc5 symlinks. (Closes: #760616)
* Fix path_is_mount_point for files (regression in 220).
* debian/control: Drop obsolete XS-Testsuite:, dpkg adds it automatically.
* Use Ubuntu's default NTP server for timesyncd when building on Ubuntu.
.
[ Michael Biebl ]
* Remove /var/run and /var/lock migration code from debian-fixup. The /run
migration was completed in wheezy so this is no longer necessary.
* Drop our versioned Depends on initscripts. This was initially added for
the /run migration and later to ensure we have a mountnfs hook which
doesn't cause a deadlock under systemd. The /run migration was completed
in wheezy and jessie ships a fixed mountnfs hook. In addition we now use
the ignore-dependencies job mode in our lsb init-functions hook, so it's
safe to drop this dependency.
* Stop building gudev packages. Upstream has moved the gudev code into a
separate repository which is now managed on gnome.org. The gudev packages
will be built from src:libgudev from now on. See also
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032070.html
.
systemd (219-10) experimental; urgency=medium
.
* Fix assertion crash with empty Exec*= paths. (LP: #1454173)
* Drop Avoid-reload-and-re-start-requests-during-early-boot.patch
and Avoid-reloading-services-when-shutting-down.patch: This was fixed more
robustly in invoke-rc.d and service now, see #777113.
* debian/tests/boot-smoke: Allow 10 seconds for systemd jobs to settle down.
* Fix "tentative" state of devices which are not in /dev (mostly in
containers), and avoid overzealous cleanup unmounting of mounts from them.
(LP: #1444402)
* debian/extra/udev-helpers/net.agent: Eliminate cat and most grep calls.
* Drop Set-default-polling-interval-on-removable-devices-as.patch; it's long
obsolete, CD ejection with the hardware button works properly without it.
* Re-enable-journal-forwarding-to-syslog.patch: Update patch description,
journal.conf.d/ exists now.
* journal: Gracefully handle failure to bind to audit socket, which is known
to fail in namespaces (containers) with current kernels. Also
conditionalize systemd-journald-audit.socket on CAP_AUDIT_READ.
(LP: #1457054)
* Put back *.agent scripts and use net.agent in Ubuntu. This fixes escaping
of unit names, reduces the delta, and will make it easier to get a common
solution for integrating ifup.d/ scripts with networkd.
* When booting with "quiet", run the initramfs' udevd with "notice" log
level. (LP: #1432171)
* Add sigpwr-container-shutdown.service: Power off when receiving SIGPWR in
a container. This makes lxc-stop work for systemd containers.
(LP: #1457321)
* write_net_rules: Escape '{' and '}' characters as well, to make this work
with busybox grep. Thanks Faidon Liambotis! (Closes: #765577)
.
systemd (219-9) experimental; urgency=medium
.
* 75-persistent-net-generator.rules: Fix rules for ibmveth (it's a driver,
not a subsystem). (LP: #1437375)
* debian/tests/unit-config: Add tests for systemctl enable/disable on a
SysV-only unit. Reproduces LP #1447807.
* Fix systemctl enable for SysV scripts without a native unit. We must not
try and enable the nonexisting unit then. (LP: #1447807)
* Drop Add-env-variable-for-machine-ID-path.patch. systemd should always
be installed via the essential "init" in buildd schroots now.
* debian/README.source: Update git-buildpackage commands for the renames in
0.6.24.
* Make apparmor run before networking, to ensure that profiles apply to
e. g. dhclient (LP: #1438249):
- Rename networking.service.d/network-pre.conf to systemd.conf, and add
After=apparmor.service.
- [email protected]: Add After=apparmor.service.
- Add Breaks: on apparmor << 2.9.2-1, which dropped its dependency to
$remote_fs.
* Drop login-don-t-overmount-run-user-UID-on-upgrades.patch and
login-don-t-overmount-run-user-UID-on-upgrades.patch, these were only
needed for upgrades from wheezy to jessie.
* systemd.{pre,post}inst: Clean up obsolete (pre-wheezy/jessie) upgrade
fixes.
* systemd-fsckd autopkgtest: Stop assuming that
/etc/default/grub.d/90-autopkgtest.cfg exists.
* systemd-fsckd autopkgtest: Add missing plymouth test dependency.
* Drop core-mount-ensure-that-we-parse-proc-self-mountinfo.patch, and bump
util-linux dependency to the version which enables
--enable-libmount-force-mountinfo.
.
systemd (219-8) experimental; urgency=medium
.
[ Michael Biebl ]
* Skip filesystem check if already done by the initramfs. (Closes: #782522)
* Drop hard-coded versioned dependency on libapparmor1. Bump the
Build-Depends on libapparmor-dev instead. This ensures a proper versioned
dependency via Build-Depends-Package.
* Revert "Make apparmor run before networking". This causes dependency
cycles while apparmor still depends on $remote_fs.
* Cleanup hwclock-save.service symlinks when upgrading from the jessie
version.
.
[ Martin Pitt ]
* cryptsetup: Implement offset and skip options. (Closes: #751707,
LP: #953875)
* logind autopkgtest: Add test for suspending on lid switch close.
This reproduces LP #1444166 (lid switch not working in the first few
minutes after boot).
* Reduce the initial suspend supression time from 3 minutes to 30 seconds,
and make it configurable. (LP: #1444166)
* Fix double free crash in "systemctl enable" when calling update-rc.d and
the latter fails. (Closes: #764613, LP: #1426588)
* hwdb: Fix wireless switch on Dell Latitude (LP: #1441849)
* Fix assertion crash when reading a service file with missing ' and
trailing space. (LP: #1447243)
* [email protected]: Set IgnoreOnIsolate, so that "systemctl default" does not
shut down network interfaces. (Closes: #762953, LP: #1449380).
Add PartOf=network.target, so that stopping network.target also stops
network interfaces (so that isolating emergency.target and similar work as
before).
* Revert upstream commit 743970d which immediately SIGKILLs units during
shutdown. This leads to problems like bash not being able to write its
history, mosh not saving its state, and similar failed cleanup actions.
(Closes: #784720, LP: #1448259)
* Drop the reversion of "journald: allow restarting journald without losing
stream connections", and replace with proper upstream fix for
sd_pid_notify_with_fds(). (See Debian #778970, LP #1423811; LP: #1437896)
.
systemd (219-7) experimental; urgency=medium
.
[ Martin Pitt ]
* Make systemd-sysv's dependency to systemd unversioned. The package just
contains 6 symlinks and thus isn't sensitive at all against version
mismatches. This avoids running into circular dependencies when testing
local debs.
* Revert "udev: Drop hwdb-update dependency" and replace with upstream patch
which moves it to systemd-udev-trigger.service.
* display-managers autopkgtest: Properly wait until all jobs are finished.
* display-managers autopkgtest: Reset failed units between tests, to avoid
running into restart limits and for better test isolation.
* Enable timesyncd in virtual machines. (Closes: #762343)
.
[ Adam Conrad ]
* debian/systemd.{triggers,postinst}: Trigger a systemctl daemon-reload
when init scripts are installed or removed (Closes: #766429)
.
[ Didier Roche ]
* Squash all fsckd patches in one (as fsckd and such will be removed
soon upstream), containing various fixes from upstream git and refactor
the connection flow to upstream's suggestion. Modify the man pages to match
those modifications as well. Amongst others, this suppresses "Couldn't
connect to plymouth" errors if plymouth is not running.
(Closes: #782265, LP: #1429171)
* Keep plymouth localized messages in a separate patch for easier updates in
the future and refresh to latest upstream.
* display-managers autopkgtest: Use ExecStart=sleep instead of the actual
lightdm binary, to avoid errors from lightdm startup. Drop the now
unnecessary "needs-recommends" to speed up the test.
.
systemd (219-6) experimental; urgency=medium
.
[ Martin Pitt ]
* Import patches from v219-stable branch (up to 85a6fab).
* boot-and-services autopkgtest: Add missing python3 test dependency.
* Make apparmor run before networking, to ensure that profiles apply to
e. g. dhclient (LP: #1438249):
- Rename networking.service.d/network-pre.conf to systemd.conf, and add
After=apparmor.service.
- [email protected]: Add After=apparmor.service.
* udev: Drop hwdb-update dependency, which got introduced by the above
v219-stable branch. This causes udev and plymouth to start too late and
isn't really needed in Debian yet as we don't support stateless systems
yet and handle hwdb.bin updates through dpkg triggers. (LP: #1439301)
.
[ Didier Roche ]
* Fix mount point detection on overlayfs and similar file systems without
name_to_handle_at() and st_dev support. (LP: #1411140)
.
[ Christian Seiler ]
* Make the journald to syslog forwarding more robust by increasing the
maximum datagram queue length from 10 to 512. (Closes: #762700)
.
[ Marco d'Itri ]
* Avoid writing duplicate entries in 70-persistent-net.rules by double
checking if the new udev rule has already been written for the given
interface. This happens if multiple add events are generated before the
write_net_rules script returns and udevd renames the interface.
(Closes: #765577)
.
systemd (219-5) experimental; urgency=medium
.
[ Didier Roche ]
* Add "systemd-fsckd" autopkgtest. (LP: #1427312)
* cmdline-upstart-boot autopkgtest: Update to Ubuntu's upstart-sysv split
(test gets skipped on Debian while upstart-sysv does not yet exist there).
* Cherry-pick a couple of upstream commits for adding transient state,
fixing a race where mounts become available before the device being
available.
* Ensure PrivateTmp doesn't require tmpfs through tmp.mount, but rather adds
an After relationship. (Closes: #779902)
.
[ Martin Pitt ]
* journald: Suppress expected cases of "Failed to set file attributes"
errors. (LP: #1427899)
* Add systemd-sysv.postinst: Update grub on first installation, so that the
alternative init system boot entries get updated.
* debian/tests: Call /tmp/autopkgtest-reboot, to work with autopkgtest >=
3.11.1.
* Check for correct architecture identifiers for SuperH. (Closes: #779710)
* Fix tmpfiles.d to only apply the first match again (regression in 219).
(LP: #1428540)
* /lib/lsb/init-functions.d/40-systemd: Don't ignore systemd unit
dependencies in "degraded" mode. (LP: #1429734)
.
[ Michael Biebl ]
* debian/udev.init: Recognize '!' flag with static device lists, to work
with kmod 20. (Closes: #780263)
.
[ Craig Magina ]
* rules-ubuntu/71-power-switch-proliant.rules: Add support for HP ProLiant
m400 Server Cartridge soft powerdown on Linux 3.16. (LP: #1428811)
.
[ Scott Wakeling ]
* Rework package description to be more accurate. (Closes: #740372)
.
systemd (219-4) experimental; urgency=medium
.
* tmpfiles: Avoid creating duplicate ACL entries. Add postinst code to clean
them up on upgrade. (Closes: #778656)
* bootchart: Fix path to default init. (LP: #1423867)
* Add "bootchart" autopkgtest, to spot regressions like the above.
* autopkgtests: Factorize out "assert.sh" utility functions, and use them in
the tests for useful failure messages.
* Downgrade requirement for timedated, hostnamed, localed-locale, and
logind autopkgtests from machine to container isolation.
* boot-and-services and display-manager autopkgtest: Add systemd-sysv as
proper test dependency instead of apt-get installing it. This works now
also under Ubuntu 15.04.
* boot-and-services autopkgtest: Check cleanup of temporary files during
boot. Reproduces #779169.
* Clean up /tmp/ directory again. (Closes: #779169, LP: #1424992)
.
systemd (219-3) experimental; urgency=medium
.
* sysv-generator: fix wrong "Overwriting existing symlink" warnings.
(Closes: #778700)
* Add systemd-fsckd multiplexer and feed its output to plymouth. This
provides an aggregate progress report of running file system checks and
also allows cancelling them with ^C, in both text mode and Plymouth.
(Closes: #775093, #758902; LP: #1316796)
* Revert "journald: allow restarting journald without losing stream
connections". This was a new feature in 219, but currently causes boot
failures due to logind and other services not starting up properly.
(Closes: #778970; LP: #1423811)
* Add "boot-smoke" autopkgtest: Test 20 successful reboots in a row, and
that there are no connection timeouts or stalled jobs. This reproduces the
above regression.
* debian/tests/localed-locale: Set up locale and keyboard default files on a
minimal unconfigured testbed.
* Add missing python3 test dependency to cmdline-upstart-boot and
display-managers autopkgtests.
* debian/tests/boot-and-services: Skip AppArmor test if AppArmor is not
enabled.
* debian/tests/boot-and-services: Reboot also if lightdm was just installed
but isn't running yet.
.
systemd (219-2) experimental; urgency=medium
.
* Fix UTF-16 to UTF-8 conversion on big-endian machines. (Closes: #778654)
* Disable new new test-sigbus, it fails on some buildds due to too old
kernels. (part of #778654)
* debian/README.Debian, debian/systemd.postinst: Drop setfacl call for
/var/log/journal, this is now done automatically by
tmpfiles.d/systemd.conf.
* Drop "acl" dependency, not necessary any more with the above.
* debian/tests/boot-and-services: Move to using /var/lib/machines/,
/var/lib/containers is deprecated.
.
systemd (219-1) experimental; urgency=medium
.
[ Martin Pitt ]
* New upstream release:
- Fix spelling mistake in systemd.unit(5). (Closes: #773302)
- Fix timeouts with D-Bus, leading to SIGFPE. (Closes: #774012)
- Fix load/save of multiple rfkill states. (Closes: #759489)
- Non-persistant journal (/run/log/journal) is now readable by group adm.
(Closes: #771980)
- Read netdev user mount option to correctly order network mounts after
network.target. (Closes: #769186)
- Fix 60-keyboard.hwdb documentation and whitespace handling.
(Closes: #757367)
- Fix ThinkPad X1 Carbon 20BT trackpad buttons (LP: #1414930)
- Drop all backported patches and port the others to new upstream release.
* Bump libblkid-dev build dependency as per upstream configure.ac.
* debian/systemd.install: Add new language-fallback-map file.
* debian/udev.install: Add new systemd-hwdb tool.
* debian/libsystemd0.symbols: Add new symbols from this release.
* tmpfiles.d/systemd.conf: Drop "wheel" ACL (that group does not exist in
Debian) to make the ACL for "adm" actually work.
* debian/rules: Explicitly disable importd for now; it should still mature a
bit. Explicitly enable hwdb support.
* /lib/lsb/init-functions.d/40-systemd: Call systemctl is-system-running
with --quiet. (LP: #1421058)
* debian/systemd.postrm: Clean [email protected] and remote-fs.target
enablement symlinks on purge. (Closes: #778499)
* Move all Debian specific units in the systemd package into
debian/extra/units/ and simplify debian/systemd.install.
* Enable timesyncd by default. Add a config drop-in to not start if ntp,
openntpd, or chrony is installed. (Closes: #755722)
* debian/systemd.links: Drop obsolete hwclockfirst.service mask link, this
was dropped in wheezy's util-linux already.
* debian/udev.postinst: Call systemd-hwdb instead of udevadm hwdb.
.
[ Michael Biebl ]
* Stop removing firstboot man pages. They are now installed conditionally.
.
systemd (218-10) experimental; urgency=medium
.
* Pull latest keymaps from upstream git. (LP: #1334968, #1409721)
* rules: Fix by-path of mmc RPMB partitions and don't blkid them. Avoids
kernel buffer I/O errors and timeouts. (LP: #1333140)
* Clean up stale mounts when ejecting CD drives with the hardware eject
button. (LP: #1168742)
* Document systemctl --failed option. (Closes: #767267)
* Quiesce confusing and irrelevant "failed to reset devices.list" warning.
(LP: #1413193)
* When booting with systemd-bootchart, default to run systemd rather than
/sbin/init (which might not be systemd). (LP: #1417059)
* boot-and-services autopkgtest: Add CgroupsTest to check cgroup
creation/cleanup behaviour. This reproduces #777601 and verifies the fix
for it.
.
systemd (218-9) experimental; urgency=medium
.
[ Martin Pitt ]
* debian/tests/logind: With dropped systemd-logind-launch we don't have a
visible /sys/fs/cgroup/systemd/ any more under cgmanager. So adjust the
test to check /proc/self/cgroup instead.
* Add unit-config autopkgtest to check systemd unit/sysv init enabling and
disabling via systemctl. This also reproduces #777613.
* systemctl: Always install/enable/disable native units, even if there is a
corresponding SysV script and we call update-rc.d; while the latter
handles WantedBy=, it does not handle Alias=. (Closes: #777613)
* cgroup: Don't trim cgroup trees created by someone else, just the ones
that systemd itself created. This avoids cleaning up empty cgroups from
e.g. LXC. (Closes: #777601)
* Don't parse /etc/mtab for current mounts, but /proc/self/mountinfo. If the
former is a file, it's most likely outdated on boot, leading to race
conditions and unmounts during boot. (LP: #1419623)
.
[ Michael Biebl ]
* Explicitly disable the features we don't want to build for those with
autodetection. This ensures reliable build results in dirty build
environments.
* Disable AppArmor support in the udeb build.
* core: Don't fail to run services in --user instances if $HOME is missing.
(Closes: #759320)
.
[ Didier Roche ]
* default-display-manager-generator: Avoid unnecessary /dev/null symlink and
warning if there is no display-manager.service unit.
.
systemd (218-8) experimental; urgency=medium
.
[ Martin Pitt ]
* boot-and-services autopkgtest: Ensure that there are no failed units,
except possibly systemd-modules-load.service (as that notoriously fails
with cruft in /etc/modules).
* Revert "input" system group creation in systemd.postinst from 218-7. It's
already done in udev.postinst.
* [email protected]: Revert checking for existance of ifupdown config for that
interface, net.agent already does that.
* Drop Also-redirect-to-update-rc.d-when-not-using-.service.patch; not
necessary any more with the current version (mangle_names() already takes
care of this).
* Merge into Add-support-for-rcS.d-init-scripts-to-the-sysv-gener.patch:
- Do-not-order-rcS.d-services-after-local-fs.target-if.patch, as it
partially reverts the above, and is just fixing it.
- Map-rcS.d-init-script-dependencies-to-their-systemd-.patch as it's just
adding some missing functionality for the same purpose.
* Merge Run-update-rc.d-defaults-before-update-rc.d-enable-d.patch into
Make-systemctl-enable-disable-call-update-rc.d-for-s.patch as the former
is fixing the latter and is not an independent change.
* Drop Launch-logind-via-a-shell-wrapper.patch and systemd-logind-launch
wrapper. The only remaining thing that we need from it is to create
/run/systemd/, move that into the D-BUS service file directly.
* /lib/lsb/init-functions.d/40-systemd: Avoid deadlocks during bootup and
shutdown. DHCP/ifupdown and similar hooks which call "/etc/init.d/foo
reload" can easily cause deadlocks, since the synchronous wait plus
systemd's normal behaviour of transactionally processing all dependencies
first easily causes dependency loops. Thus during boot/shutdown operate
only on the unit and not on its dependencies, just like SysV behaves.
(Closes: #777115, LP: #1417010)
* Only start logind if dbus is installed. This fixes the noisy startup
failure in environments without dbus, such as LXC containers or servers.
(part of #772700)
* Add getty-static.service unit which starts [email protected] on tty 2 to 6 if
dbus is not installed, and hence logind cannot auto-start them on demand.
(Closes: #772700)
.
[ Michael Biebl ]
* Update insserv-generator and map $x-display-manager to
display-manager.service, following the recent change in sysv-generator.
This avoids creating references to a no longer existing
x-display-manager.target unit.
.
systemd (218-7) experimental; urgency=medium
.
[ Martin Pitt ]
* Don't attempt to mount the same swap partition twice through different
device node aliases. (Closes: #772182, LP: #1399595)
* logind: handle closing sessions over daemon restarts. (Closes: #759515,
LP: #1415104)
* logind: Fix sd_eviocrevoke ioctl call, to make forced input device release
after log out actually work.
* debian/rules: Drop obsolete --disable-multi-seat-x and
--with-firmware-path configure options.
* debian/udev.README.Debian: Trim the parts which are obsolete, wrong, or
described in manpages. Only keep the Debian specific bits.
(Part of #776546)
* Actually install udev's README.Debian when building for Debian.
(Closes: #776546)
* Create system group "input" which was introduced in 215. (LP: #1414409)
* [email protected]: Don't fail if the interface is not configured in
/etc/network/interfaces at all. (LP: #1414426)
.
[ Michael Biebl ]
* Update Vcs-Browser URL to use cgit and https.
* Map $x-display-manager LSB facility to display-manager.service instead of
making it a target. Using a target had the downside that multiple display
managers could hook into it at the same time which could lead to several
failed start attempts for the non-default display manager.
.
systemd (218-6) experimental; urgency=medium
.
[ Martin Pitt ]
* initramfs hook: Install 61-persistant-storage-android.rules if it exists.
* Generate POT file during package build, for translators.
* Pull latest keymaps from upstream git.
* Order [email protected] and networking.service after network-pre.target.
(Closes: #766938)
* Tone down "Network interface NamePolicy= disabled on kernel commandline,
ignoring" info message to debug, as we expect this while we disable
net.ifnames by default. (Closes: #762101, LP: #1411992)
.
[ Michael Biebl ]
* Ship bash-completion for udevadm. (Closes: #776166)
* Drop rc-local generator in favor of statically enabling rc-local.service,
and drop halt-local.service which is unnecessary on Debian.
(Closes: #776170)
* Drop the obsolete libsystemd-* libraries, there are no reverse
dependencies left.
.
systemd (218-5) experimental; urgency=medium
.
* Drop logger.agent. It hasn't been called from any udev rule for a long
time, and looks obsolete.
* debian/rules: Configure with --disable-firstboot to replace some manual
file removals.
* debian/rules: Remove manual file installation, move them to
debian/*.install. Move all Debian specific installed files to
debian/extra/.
* Merge some changes from the Ubuntu package to reduce the delta; these only
apply when building on/for Ubuntu:
- Add 40-hyperv-hotadd.rules: Workaround for LP: #1233466.
- Add 61-persistant-storage-android.rules to create persistent symlinks
for partitions with PARTNAME. By Ricardo Salveti.
- Add 71-power-switch-proliant.rules for supporting the power switches of
ProLiant Server Cartridges. By Dann Frazier.
- Add 78-graphics-card.rules: Mark KMS capable graphics devices as
PRIMARY_DEVICE_FOR_DISPLAY so that we can wait for those in plymouth.
By Scott James Remnant.
- Don't install the Debian *.agent scripts. Instead, have Ubuntu's
80-networking.rules directly pull in [email protected], which is much easier
and more efficient.
* Make EPERM/EACCESS when applying OOM adjustment for forked processes
non-fatal. This happens in user namespaces like unprivileged LXC
containers.
* Fix assertion failure due to /dev/urandom being unmounted when shutting
down unprivileged containers. Thanks Stéphane Graber.
* Enable EFI support. This mostly auto-mounts /sys/firmware/efi/efivars, but
also provides a generator for auto-detecting the root and the /boot/efi
partition if they aren't in /etc/fstab. (Closes: #773533)
.
systemd (218-4) experimental; urgency=medium
.
[ Michael Biebl ]
* sysv-generator: handle Provides: for non-virtual facility names.
(Closes: #774335)
* Fix systemd-remount-fs.service to not fail on remounting /usr if /usr
isn't mounted yet. This happens with initramfs-tools < 0.118 which we
might not get into Jessie any more. (Closes: #742048)
.
[ Martin Pitt ]
* fstab-generator: Handle mountall's non-standard "nobootwait" and
"optional" options. ("bootwait" is already the systemd default behaviour,
and "showthrough" is irrelevant here, so both can be ignored).
* Add autopkgtest for one-time boot with upstart when systemd-sysv is
installed. This test only works under Ubuntu which has a split out
upstart-bin package, and will be skipped under Debian.
* debian/[email protected]: Check if ifup succeeds by calling ifquery, to
work around ifup not failing on invalid interfaces (see #773539)
* debian/[email protected]: Set proper service type (oneshot).
* sysv-generator: Handle .sh suffixes when translating Provides:.
(Closes: #775889)
* sysv-generator: Make real units overwrite symlinks generated by Provides:
from other units. Fixes failures due to presence of backup or old init.d
scripts. (Closes: #775404)
* Fix journal forwarding to syslog in containers without CAP_SYS_ADMIN.
(Closes: #775067)
* Re-enable AppArmor support, now that libapparmor1 moved to /lib. Add
versioned dependency as long as this is still only in experimental.
(Closes: #775331)
* Add some missing dpkg and ucf temp files to the "hidden file" filter, to
e. g. avoid creating units for them through the sysv-generator.
(Closes: #775903)
* Silence useless warning about /etc/localtime not being a symlink. This is
deliberate in Debian with /usr (possibly) being on a separate partition.
(LP: #1409594)
.
[ Christian Kastner ]
* Use common-session-noninteractive in systemd-user's PAM config, instead of
common-session. The latter can include PAM modules like libpam-mount which
expect to be called just once and/or interactively, which already happens
for login, ssh, or the display-manager. Add pam_systemd.so explicitly, as
it's not included in -noninteractive, but is always required (and
idempotent). There is no net change on systemd which don't use manually
installed PAM modules. (Closes: #739676)
.
[ Michael Biebl ]
* Make sure we run debian-fixup.service after /var has been mounted if /var
is on a separate partition. Otherwise we might end up creating the
/var/lock and /var/run symlink in the underlying root filesystem.
(Closes: #768644)
.
systemd (218-3) experimental; urgency=medium
.
* build-logind autopkgtest: Re-enforce that sd_login_monitor_new() succeeds,
and restrict this test to isolation-container. (Reproduces LP #1400203)
* Bring back patch to make sd_login_monitor_new() work under other init
systems where /sys/fs/cgroup/systemd/machine does not exist.
(LP: #1400203)
* build-login autopkgtest: Build against libsystemd, not libsystemd-login
any more.
* Add debian/extra/systemd-vconsole-setup.service dependency shim for
the console-setup init script, to avoid breaking dependencies of
third-party packages. Install it for Ubuntu only for now, as in Debian
plymouth's unit got adjusted. (LP: #1392970, Debian #755194)
* Mark systemd{,-sysv} as M-A: foreign (thanks lintian).
* Quiesce maintainer-script-calls-systemctl lintian warning.
* Quiesce possibly-insecure-handling-of-tmp-files lintian warning, it's
wrong there (we are handling tmpfiles.d/ files which are not in a temp
dir).
* Use dh_installinit's --noscript instead of --no-start for the upstart
jobs without sysvinit scripts (thanks lintian).
* Put systemd.pc into arch specific pkgconfig dir, as it contains the arch
specific libdir value.
* Don't enable audit by default. It causes flooding of dmesg and syslog,
suppressing actually important messages. (Closes: #773528)
* Cherrypick various bug fixes in loopback device setup and netlink socket
communication. Fixes massive CPU usage due to tight retry loops in user
LXC containers.
.
systemd (218-2) experimental; urgency=medium
.
* boot-and-services AppArmor autopkgtest: Stop checking the dmesg log; it is
racy as sometimes message bursts are suppressed.
* Fix crash in timedatectl with Etc/UTC.
* Prefer-etc-X11-default-display-manager-if-present.patch: Drop wrong
copy&paste'd comment, fix log strings. Thanks Adam D. Barratt.
* boot-and-services: Robustify Nspawn tests, and show systemd-nspawn output
on failure.
* Disable tests which fail on buildds, presumably due to too old kernels,
misconfigured /etc/hosts, and similar problems. Make failures of the test
suite fatal now.
.
systemd (218-1) experimental; urgency=medium
.
* New upstream release. Drop all cherry-picked patches and port the Debian
specific ones.
- Create /etc/machine-id on boot if missing. (LP: #1387090)
* Add new libmount-dev build dependency.
* Configure with --enable-split-usr.
* Merge some permanent Ubuntu changes, using dpkg-vendor:
- Don't symlink udev doc directories.
- Add epoch to gudev packages; Ubuntu packaged the standalone gudev before
it got merged into udev.
- Add Apport hooks for udev and systemd.
* udev-fallback-graphics upstart job: Guard the modprobe with || true to
avoid a failure when vesafb is compiled in. (LP: #1367241)
.
systemd (217-4) experimental; urgency=medium
.
[ Martin Pitt ]
* Reinstate a debian/extra/rules/50-firmware.rules which immediately tells
the kernel that userspace firmware loading failed. Otherwise it tries for a
minute to call the userspace helper (if CONFIG_FW_LOADER_USER_HELPER is
enabled) in vain, which causes long delays with devices which have a range
of possible firmware versions. (LP: #1398458)
* debian/systemd.postinst: Don't always restart journald, as this currently
can't be done without losing the current journal and breaking attached
processes. So only restart it from upgrades < 215-3 (where the socket
location got moved) as an one-time upgrade path from wheezy.
(Closes: #771122)
* Revert "Modify insserv generator to mask sysvinit-only display managers".
This is still under dispute, a bit risky, and might get a different
implementation. Also, nodm really needs to be fixed properly, working
around it is both too risky and also too hard to get right.
.
[ Didier Roche ]
* Add display managers autopkgtests.
* Reset display-manager symlink to match /e/X/d-d-m even if
display-manager.service was removed. Adapt the autopkgtests for it.
(LP: #1400680)
.
systemd (217-3) experimental; urgency=medium
.
[ Martin Pitt ]
* systemd.bug-script: Really capture stderr of systemd-delta.
(Closes: #771498)
* boot-and-services autopkgtest: Give test apparmor job some time to
actually finish.
.
[ Didier Roche ]
* updated debian/patches/insserv.conf-generator.patch:
- if /etc/X11/default-display-manager doesn't match a systemd unit
(or doesn't exist), be less agressive about what to mask: we let
all sysvinit-only display-manager units enabled to fallback to previous
behavior and let them starting. (Closes: #771739)
.
systemd (217-2) experimental; urgency=medium
.
* Re-enable journal forwarding to syslog, until Debian's sysloggers
can/do all read from the journal directly.
* Fix hostnamectl exit code on success.
* Fix "diff failed with error code 1" spew with systemd-delta.
(Closes: #771397)
* Re-enable systemd-resolved. This wasn't meant to break the entire
networkd, just disable the new NSS module. Remove that one manually
instead. (Closes: #771423, LP: #1397361)
* Import v217-stable patches (up to commit bfb4c47 from 2014-11-07).
* Disable AppArmor again. This first requires moving libapparmor to /lib
(see #771667). (Closes: #771652)
* systemd.bug-script: Capture stderr of systemd-{delta,analyze}.
(Closes: #771498)
.
systemd (217-1) experimental; urgency=medium
.
[ Martin Pitt ]
* New upstream release. Drop all cherry-picked patches and port the Debian
specific ones.
* Disable systemd-resolved for now. It still needs to mature, and
integration into Debian should be discussed first.
* Bump util-linux dependency to >= 2.25 as per NEWS.
* Drop installation of 50-firmware.rules, not shipped upstream any more.
Firmware loading is now exclusively done by the kernel.
* Drop installation of readahead related services and code, readahead got
dropped in this version.
* Ship new networkctl CLI tool.
* debian/libsystemd0.symbols: Add new symbols from this release.
* debian/rules: Call dpkg-gensymbols with -c4 to immediately spot
changed/missing symbols during build.
* boot-and-services autopkgtest: Test AppArmor confined units (LP #1396270)
* Create new "systemd-journal-remote" system group, for
systemd-tmpfiles-setup.service.
.
[ Marc Deslauriers ]
* Build-depend on libapparmor-dev to enable AppArmor support. (LP: #1396270)
.
[ Didier Roche ]
* Handle display-manager transitions: (Closes: #748668)
- Add a generator to ensure /etc/X11/default-display-manager is controlling
which display-manager is started.
- Modify insserv generator to mask of sysvinit-only dms with insserv
$x-display-manager tag if they don't match
/etc/X11/default-display-manager. This avoids starting multiple dms at
boot.
* Cherry-pick Shared-add-readlink_value.patch as using that function in the
generator.
Checksums-Sha1:
909957db005ea555556c50db6d0372221c1a1ac9 3663 systemd_220-2.dsc
2fb8f59bcc36ed4e08b164dd5b294c33193ff50a 152796 systemd_220-2.debian.tar.xz
f2ff8d77b1eeb3e1c9d712c65f82ef2f37466f24 61608
libnss-myhostname_220-2_amd64.deb
aa8b8eb41f3937c0269f9caf53d2212936e1dbf4 141790
libnss-mymachines_220-2_amd64.deb
085af5c621baddda750c7f6986473a607a643f26 145860 libpam-systemd_220-2_amd64.deb
a0618b52148dfa912f42bf2ff14538184ff4d71c 40822
libsystemd-daemon-dev_220-2_amd64.deb
1c10dcc758f47f6aea49d736882a87617785fc9e 107154 libsystemd-dev_220-2_amd64.deb
efb00887f72ebadc8c0bc69629089261321b2527 40794
libsystemd-id128-dev_220-2_amd64.deb
78e04031540f95235c46b46074bce149f6bd9438 40796
libsystemd-journal-dev_220-2_amd64.deb
551061fa257ecd65e86aff70d1a5e3bdd0c6a1fb 40810
libsystemd-login-dev_220-2_amd64.deb
76ecc68d7efb599db3f9377aa3ca452810400ceb 107052 libsystemd0_220-2_amd64.deb
3af711c2025727b91b22a8a12a96b429ca3b49fe 23154 libudev-dev_220-2_amd64.deb
a904f0db34674afb3b84001d0b00a1262965a3c7 46166 libudev1-udeb_220-2_amd64.udeb
b639308bb946baf0502e55b4f0ecdf224107670a 87918 libudev1_220-2_amd64.deb
cc6ac7935514cb7972e9bf48844c8a800e8e2fe1 73182 python3-systemd_220-2_amd64.deb
191edf5c0776d4f714dc85872b08cc9532b878f5 23652474 systemd-dbg_220-2_amd64.deb
41675e14ff7cb715363e579f031d7ff194ad3504 45462 systemd-sysv_220-2_amd64.deb
d24d189d7d361d7b6df62d7cd3e4ca43c64b7aae 3537860 systemd_220-2_amd64.deb
0ce1d304789e31f3863c56c014147d7b96ebeb45 251614 udev-udeb_220-2_amd64.udeb
e7fa514cbc25f351e4688a3de472421fe78332ba 987564 udev_220-2_amd64.deb
Checksums-Sha256:
a9284e74f0d5afaecf20f8a4fb550464f98ec2b8ebd0af635a64f9ce895cca52 3663
systemd_220-2.dsc
3127dfcf07e0fd6255191d0186f196498ba1b29bf14e0bd43f9eb941d00c1841 152796
systemd_220-2.debian.tar.xz
76c206e61cd266fac0a10664e8b64132366894892666483ab5b84e15096ba9a9 61608
libnss-myhostname_220-2_amd64.deb
68cde8de77aeac670e18cedca26ebdb5d876e5c81b19b8433ba531ccba54f2ac 141790
libnss-mymachines_220-2_amd64.deb
3daf39e4d54d9eeddb19ed41ba6be1ec0aa374ac87b99c1863de09c907918c81 145860
libpam-systemd_220-2_amd64.deb
7d5b8dcbd283932f3fbfcaba7567b1d5c131bf4045a795a879c5a43eece041a8 40822
libsystemd-daemon-dev_220-2_amd64.deb
ed0aa3c580f3afe30c9db54f9e245bf43e34c57c8245798b4e07a520adb39cde 107154
libsystemd-dev_220-2_amd64.deb
3affe60bb1aaeefbf545b98807600377bfd5e612ab2d682fdbc5f7d26f397ec5 40794
libsystemd-id128-dev_220-2_amd64.deb
a0e2c71073d22309b822007b8a2f92e46d2efd3130fb09f719ea7ee9e0c36135 40796
libsystemd-journal-dev_220-2_amd64.deb
4fdd861f1565fb4c26d20486b03ccb5257593cc2be2b86ae5ff4a0732513cbb3 40810
libsystemd-login-dev_220-2_amd64.deb
1757845e0f7b43da40ecbd31a800d6b9354149aafe7fa2260d9187dd4e7dc920 107052
libsystemd0_220-2_amd64.deb
5ba4ea7df4c3f89ac135612a6a5b3c2f44c30f154cead9b39ca9540ba2c05c16 23154
libudev-dev_220-2_amd64.deb
2ec0455ca441cb793be3984d2975f758fe12ef90809901d899e3d8415958a155 46166
libudev1-udeb_220-2_amd64.udeb
4c8eab44339f140b090d6e7ddc4a2f3a4a4f78ee2ea922f09033fff253ea7b9c 87918
libudev1_220-2_amd64.deb
f80cf67b3e2b4852823af40697099fdd525fcc85297ac95ef6f0670f5e91538f 73182
python3-systemd_220-2_amd64.deb
0fdf7a891a32de4ee06b7fa7c5a58188a2b42db9f7f8346d77559479d280d581 23652474
systemd-dbg_220-2_amd64.deb
79d490687c530e3b9009835846d1d741ba9da6f75858d185f5efc67074b832bd 45462
systemd-sysv_220-2_amd64.deb
676e8487762c9b4ad657e7c5f7118e87fee29374f164d8fbdb99a8bc7f6880be 3537860
systemd_220-2_amd64.deb
d2204d9b1edb56aad7f84dd36b1146ae9c5312f76bc4e89d0b6fd730b9b261c6 251614
udev-udeb_220-2_amd64.udeb
90fa4336967f4d0b264ba3ebb464c36ead05ca97406364157ce7e41195f729b3 987564
udev_220-2_amd64.deb
Files:
7c1e311d396cd31c0dde1525c431b3b5 3663 admin optional systemd_220-2.dsc
bbcede8b9de84534da196a91575cec58 152796 admin optional
systemd_220-2.debian.tar.xz
28624de9ddca9cb7ca55de5cd43f9d65 61608 admin extra
libnss-myhostname_220-2_amd64.deb
9e2d7966fc0463b87375e9cfdc34cdfc 141790 admin extra
libnss-mymachines_220-2_amd64.deb
ec5125f048695d05e89fb994557a57b5 145860 admin optional
libpam-systemd_220-2_amd64.deb
0fa11c900580611c8c732962d8b6a38c 40822 oldlibs extra
libsystemd-daemon-dev_220-2_amd64.deb
94d3b986cc2e89bca616a9dd4b3a47ee 107154 libdevel optional
libsystemd-dev_220-2_amd64.deb
ee67cdc0a1389cc1119d0a0a2429efb3 40794 oldlibs extra
libsystemd-id128-dev_220-2_amd64.deb
ea7f03dea1654a859aac7f6e5f452a55 40796 oldlibs extra
libsystemd-journal-dev_220-2_amd64.deb
9baac90f07531922ecaf6dea5422c461 40810 oldlibs extra
libsystemd-login-dev_220-2_amd64.deb
1b6c294b1e2b202a6c2dc34c46a80abe 107052 libs optional
libsystemd0_220-2_amd64.deb
5ddfac648567a463cf80d275279a3a8d 23154 libdevel optional
libudev-dev_220-2_amd64.deb
75259f52a62569935eacb7036b3267ea 46166 debian-installer optional
libudev1-udeb_220-2_amd64.udeb
32008d44962a1991ad98fe0cef90b2f1 87918 libs important libudev1_220-2_amd64.deb
66cec86f4be50f17a9a502d5365292d9 73182 python optional
python3-systemd_220-2_amd64.deb
38228c3d87093fde2318fd5e20a99c11 23652474 debug extra
systemd-dbg_220-2_amd64.deb
a1de72b3db102b174ec26e3138bc4847 45462 admin extra systemd-sysv_220-2_amd64.deb
4a5da82b6054a77182847d74e501d59d 3537860 admin optional systemd_220-2_amd64.deb
dddd33204350f3a813febe4032c9324a 251614 debian-installer optional
udev-udeb_220-2_amd64.udeb
238037960f0329cb1db3a85a73c122c4 987564 admin important udev_220-2_amd64.deb
Package-Type: udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IGlm
-----END PGP SIGNATURE-----
--- End Message ---
