--- Begin Message ---
Package: joystick
Version: 1:1.4.8-1
Severity: important
Hello,
I used to be able to use jscal-store and jscal-restore normally a few months
ago (probably with kernel linux-image-3.16.0-4-amd64 version 3.16.7-ckt9-3),
but these programs don't work in a satisfactory way anymore:
# jscal-store /dev/input/js0
No product name or vendor available, calibration will be stored for the
given device name (js0) only!
# tail /var/lib/joystick/joystick.state
NAME="SAITEK CYBORG 3D USB"
VENDOR="06a3"
PRODUCT="0006"
jscal -u
6,0,1,5,6,16,17,14,288,289,290,291,292,293,294,295,296,297,298,299,300,301
jscal -s
6,1,0,90,101,9256113,9760991,1,0,87,94,9256113,8947575,1,1,75,93,10956215,8388352,1,1,87,87,7354172,7254791,1,0,0,0,-2147483648,536854528,1,0,0,0,-2147483648,536854528
DEVICE="js0"
jscal -u
6,0,1,5,6,16,17,14,288,289,290,291,292,293,294,295,296,297,298,299,300,301
jscal -s
6,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,112,142,5534751,5534751,1,0,0,0,536870912,536870912,1,0,0,0,536870912,536870912
#
The paragraph starting with NAME="SAITEK CYBORG 3D USB" was already there; the
jscal-store call added the last paragraph, identified with DEVICE="js0", which
is not very reliable of course. The corresponding dmesg output is:
[ 2.262075] usb 8-1.3: new low-speed USB device number 5 using ehci-pci
[ 2.358626] usb 8-1.3: New USB device found, idVendor=06a3, idProduct=0006
[ 2.358686] usb 8-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.358756] usb 8-1.3: Product: CYBORG 3D USB
[ 2.358804] usb 8-1.3: Manufacturer: SAITEK
[ 2.364616] input: SAITEK CYBORG 3D USB as
/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.3/8-1.3:1.0/0003:06A3:0006.0002/input/input2
[ 2.364938] hid-generic 0003:06A3:0006.0002: input,hidraw1: USB HID v1.00
Joystick [SAITEK CYBORG 3D USB] on usb-0000:00:1a.7-1.3/input0
As expected, jscal-restore does not restore anything except when
/var/lib/joystick/joystick.state contains a paragraph identified with
DEVICE="js0" or similar, which by chance happens to correspond to the right
joystick (I checked this with 'jscal -p /dev/input/js0').
Thanks
-- Package-specific info:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.3/8-1.3:1.0/0003:06A3:0006.0002/input/input2/js0':
KERNEL=="js0"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.3/8-1.3:1.0/0003:06A3:0006.0002/input/input2':
KERNELS=="input2"
SUBSYSTEMS=="input"
DRIVERS==""
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.3/8-1.3:1.0/0003:06A3:0006.0002':
KERNELS=="0003:06A3:0006.0002"
SUBSYSTEMS=="hid"
DRIVERS=="hid-generic"
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.3/8-1.3:1.0':
KERNELS=="8-1.3:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="usbhid"
looking at parent device '/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.3':
KERNELS=="8-1.3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7/usb8/8-1':
KERNELS=="8-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7/usb8':
KERNELS=="usb8"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7':
KERNELS=="0000:00:1a.7"
SUBSYSTEMS=="pci"
DRIVERS=="ehci-pci"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.1/8-1.1.3/8-1.1.3:1.0/0003:0079:0006.0005/input/input9/js1':
KERNEL=="js1"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.1/8-1.1.3/8-1.1.3:1.0/0003:0079:0006.0005/input/input9':
KERNELS=="input9"
SUBSYSTEMS=="input"
DRIVERS==""
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.1/8-1.1.3/8-1.1.3:1.0/0003:0079:0006.0005':
KERNELS=="0003:0079:0006.0005"
SUBSYSTEMS=="hid"
DRIVERS=="dragonrise"
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.1/8-1.1.3/8-1.1.3:1.0':
KERNELS=="8-1.1.3:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="usbhid"
looking at parent device
'/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.1/8-1.1.3':
KERNELS=="8-1.1.3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7/usb8/8-1/8-1.1':
KERNELS=="8-1.1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7/usb8/8-1':
KERNELS=="8-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7/usb8':
KERNELS=="usb8"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
looking at parent device '/devices/pci0000:00/0000:00:1a.7':
KERNELS=="0000:00:1a.7"
SUBSYSTEMS=="pci"
DRIVERS=="ehci-pci"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.0.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages joystick depends on:
ii libc6 2.19-18
ii libsdl1.2debian 1.2.15-11
Versions of packages joystick recommends:
ii evtest 1:1.32-1
pn inputattach <none>
joystick suggests no packages.
-- no debconf information
--- End Message ---
pgplsUUUwPY2w.pgp
