Your message dated Tue, 09 Feb 2016 15:25:42 +0000 with message-id <E1aTAAg-0004io-SM@deadeye> and subject line Closing bugs assigned to linux-2.6 package has caused the Debian Bug report #660394, regarding linux-image-3.2.0-1-amd64: Screen goes blank @30 seconds into boot to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 660394: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660394 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-2.6 Version: 3.2.6-1 Severity: important Dear Maintainer, System: Dell Inspiron One Chipset: intel H61 Express CPU: Intel Pentium Dual Core Intel Core i3/i5i7 (this machine is probably an i3 Video: Intel HD/HD 2000/HD 3000 Max Resolution: 1920×1080 OS-1 Windows 7 (shipped with this OS) OS-2 Debian Sid liquorix kernel 3.2 DE: lxde no DM I start x manually ========================================= When booting the screen goes blank about 80% through the boot cycle. The system is still running, I can log in blind and execute reboot command. I ssh into the system from another computer. kern.log reports “Firmware Bug: ACPI: No _BQC method, cannot determine initial brightness” inxi -Fxx reports Drivers: (vesa, intel (unloaded: fbdev) Resolution 1280×[email protected] sporadically, I get a good boot, maybe once in 20 tries. -- Package-specific info: ** Version: Linux version 3.2.0-1-amd64 (Debian 3.2.4-1) ([email protected]) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 15:17:15 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=d1beef49-e3a2-4489-939b-9e10464f122a ro quiet ** Not tainted ** Kernel log: [ 4.638882] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 4.638916] usbcore: registered new interface driver btusb [ 4.644994] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 4.761426] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 4.761431] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 4.774476] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 4.774548] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 4.774605] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.787494] Bluetooth: Error loading firmware [ 4.787549] ath3k: probe of 1-1.3:1.0 failed with error -5 [ 4.787572] usbcore: registered new interface driver ath3k [ 4.874651] ath9k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.874664] ath9k 0000:02:00.0: setting latency timer to 64 [ 4.923420] ath: EEPROM regdomain: 0x60 [ 4.923422] ath: EEPROM indicates we should expect a direct regpair map [ 4.923424] ath: Country alpha2 being used: 00 [ 4.923425] ath: Regpair used: 0x60 [ 4.926126] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.926130] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with ACPI region SMRG [io 0xf040-0xf04f] [ 4.926132] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.960972] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 4.960977] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 4.996845] [drm] Initialized drm 1.1.0 20060810 [ 5.012405] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.012410] i915 0000:00:02.0: setting latency timer to 64 [ 5.046144] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 5.046146] [drm] MTRR allocation failed. Graphics performance may suffer. [ 5.046387] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 5.046391] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.046392] [drm] Driver supports precise vblank timestamp query. [ 5.046418] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.087634] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 5.087984] Registered led device: ath9k-phy0 [ 5.087990] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=18 [ 5.212682] Linux media interface: v0.10 [ 5.238509] input: Dell Dell KM632 Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5 [ 5.238584] generic-usb 0003:413C:2501.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell KM632 Wireless Keyboard and Mouse] on usb-0000:00:1d.0-1.3/input0 [ 5.241319] input: Dell Dell KM632 Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6 [ 5.241406] generic-usb 0003:413C:2501.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Dell Dell KM632 Wireless Keyboard and Mouse] on usb-0000:00:1d.0-1.3/input1 [ 5.242841] input: Dell Dell KM632 Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/input/input7 [ 5.242905] generic-usb 0003:413C:2501.0003: input,hidraw2: USB HID v1.11 Mouse [Dell Dell KM632 Wireless Keyboard and Mouse] on usb-0000:00:1d.0-1.3/input2 [ 5.242916] usbcore: registered new interface driver usbhid [ 5.242917] usbhid: USB HID core driver [ 5.246368] Linux video capture interface: v2.00 [ 5.263641] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (064e:8120) [ 5.281612] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8 [ 5.281668] usbcore: registered new interface driver uvcvideo [ 5.281669] USB Video Class driver (1.1.1) [ 6.399637] fbcon: inteldrmfb (fb0) is primary device [ 6.716208] Console: switching to colour frame buffer device 240x67 [ 6.722825] fb0: inteldrmfb frame buffer device [ 6.722826] drm: registered panic notifier [ 6.722837] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 6.722957] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 6.723062] acpi device:33: registered as cooling_device2 [ 6.723111] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 6.723148] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.723295] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.723331] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.723381] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 6.723405] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6.801637] hda_codec: ALC269: SKU not ready 0x598301f0 [ 6.803387] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 6.805847] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 6.805941] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 7.414537] Adding 2122748k swap on /dev/sda6. Priority:-1 extents:1 across:2122748k [ 7.533440] EXT3-fs (sda5): using internal journal [ 7.608492] loop: module loaded [ 8.614629] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.883551] RPC: Registered named UNIX socket transport module. [ 8.883554] RPC: Registered udp transport module. [ 8.883555] RPC: Registered tcp transport module. [ 8.883556] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.142743] FS-Cache: Loaded [ 9.174915] FS-Cache: Netfs 'nfs' registered for caching [ 9.192574] r8169 0000:04:00.0: eth0: link down [ 9.192606] r8169 0000:04:00.0: eth0: link down [ 9.192867] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.195749] Installing knfsd (copyright (C) 1996 [email protected]). [ 9.568173] fuse init (API version 7.17) [ 9.800553] wlan0: authenticate with 00:1e:e5:50:55:cf (try 1) [ 9.802715] wlan0: authenticated [ 9.831393] wlan0: associate with 00:1e:e5:50:55:cf (try 1) [ 9.835258] wlan0: RX AssocResp from 00:1e:e5:50:55:cf (capab=0x401 status=0 aid=1) [ 9.835261] wlan0: associated [ 9.842268] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.796553] r8169 0000:04:00.0: eth0: link up [ 10.796829] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.751364] lp: driver loaded but no devices found [ 11.753462] ppdev: user-space parallel port driver [ 20.542457] wlan0: no IPv6 routers present [ 21.324816] eth0: no IPv6 routers present [84955.168666] device-mapper: uevent: version 1.0.3 [84955.168726] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [84960.137026] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [84960.137261] SGI XFS Quota Management subsystem [84960.139185] JFS: nTxBlock = 8192, nTxLock = 65536 [84960.145674] NTFS driver 2.1.30 [Flags: R/W MODULE]. [84960.150626] QNX4 filesystem 0.2.3 registered. [84960.158338] Btrfs loaded ** Model information sys_vendor: Dell Inc. product_name: Inspiron One 2320 product_version: 00 chassis_vendor: Dell Inc. chassis_version: 20167165690_1 bios_vendor: Dell Inc. bios_version: A04 board_vendor: Dell Inc. board_name: 0DMNCP board_version: A00 ** Loaded modules: btrfs zlib_deflate crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext4 jbd2 ext2 dm_mod parport_pc ppdev lp parport fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc loop snd_hda_codec_realtek joydev uvcvideo snd_hda_intel snd_hda_codec videodev usbhid hid media v4l2_compat_ioctl32 snd_hwdep snd_pcm arc4 i915 drm_kms_helper drm snd_seq i2c_i801 i2c_algo_bit snd_timer snd_seq_device ath9k mac80211 i2c_core iTCO_wdt ath9k_common ath9k_hw ath3k btusb ath bluetooth cfg80211 crc16 dell_wmi_aio psmouse sparse_keymap snd soundcore processor iTCO_vendor_support rfkill video button evdev snd_page_alloc wmi serio_raw dcdbas pcspkr thermal_sys ext3 jbd mbcache sr_mod cdrom sd_mod crc_t10dif ehci_hcd ahci libahci libata usbcore usb_common r8169 mii scsi_mod ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Subsystem: Dell Device [1028:0511] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0511] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Dell Device [1028:0511] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at fe508000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0511] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe507000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Dell Device [1028:0511] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe400000-fe4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000e0000000-00000000e00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0511] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe506000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05) Subsystem: Dell Device [1028:0511] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device [1028:0511] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 45 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at fe505000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Dell Device [1028:0511] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe504000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Dell Wireless 1702 802.11bgn Half-size Mini PCIe Card [AR9002WB-1NGCD] [1028:0205] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Dell Device [1028:0511] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at e000 [size=256] Region 2: Memory at e0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at e0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 001 Device 004: ID 0cf3:3002 Atheros Communications, Inc. Bus 001 Device 005: ID 064e:8120 Suyin Corp. Bus 002 Device 003: ID 413c:2501 Dell Computer Corp. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.100 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.2.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.2.0-1-amd64 suggests: pn grub-pc 1.99-14 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux 0.35 pn firmware-linux-nonfree 0.35 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek 0.35 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64: linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
--- End Message ---
--- Begin Message ---Version: 3.4.1-1~experimental.1+rm Debian 6.0 Long Term Support is now ending, and the 'linux-2.6' source package will no longer be updated. This bug is being closed on the assumption that it does not affect the kernel versions in newer Debian releases. If you can still reproduce this bug in a newer release, please reopen the bug report and reassign it to 'src:linux' and the affected version of the package. You can find the package version for the running kernel by running: uname -v or the versions of all installed kernel packages by running: dpkg -l 'linux-image-[34]*' | grep ^.i and looking at the third column. I apologise that we weren't able to provide a specific resolution for this bug. Ben. -- Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
