--- Begin Message ---
Package: fglrx-driver
Version: 1:15.7-1
Severity: grave
Justification: renders package unusable
reported once as linux-firmware-nonfree but its the fglrx package.When its not
installed and open source driver is enabled, linux complains about linux-
firmware-nonfree and kms not being available.
If and when your system breaks, (lets say you fubared a /var/tmp or /tmp entry
in /etc/fstab or the rootfs gets mounted ro instead or rw) you get the console
in a working state.It only breaks terminal output when using X11 under init-
level 5. Sadly, you cant switch to another init level once 5 has fired up.If
you try, you just get a black screen.You have to be in the console to do this.
You get slammed into init level 5 once the "issue" gets resolved and must force
a drop back into level 3 if you dont want X11 to fire.Something changed. This
was not the usual case in the past.
I swear Ive seen this bug before but I cannot find a solution.
Is the default vterm resolution out of whack?
Using grub option "nomodeset" has no effect.
If X11 bails on you, the only two options are "play whack a mole with the reset
button" or hit CTRL-ALT-DELETE.Even then, there is delay on X11 exit.
-- Package-specific info:
Full fglrx package list:
ii fglrx-atievent 1:15.7-1 amd64 events daemon for the non-free AT
ii fglrx-control 1:15.7-1 amd64 control panel for the non-free AT
ii fglrx-driver 1:15.7-1 amd64 non-free ATI/AMD RadeonHD display
ii fglrx-modules- 1:15.7-1 amd64 dkms module source for the non-fr
ii libfglrx:amd64 1:15.7-1 amd64 non-free ATI/AMD RadeonHD display
ii libfglrx:i386 1:15.7-1 i386 non-free ATI/AMD RadeonHD display
ii libfglrx-amdxv 1:15.7-1 amd64 AMD XvBA (X-Video Bitstream Accel
ii libfglrx-amdxv 1:15.7-1 i386 AMD XvBA (X-Video Bitstream Accel
ii libgl1-fglrx-g 1:15.7-1 amd64 proprietary libGL for the non-fre
ii libgl1-fglrx-g 1:15.7-1 i386 proprietary libGL for the non-fre
ii libgl1-fglrx-g 1:15.7-1 i386 ATI/AMD binary OpenGL 32-bit libr
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP] [1002:6819]
(prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:a001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 57
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea00000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fea40000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP] [1002:6819]
(prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:a001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe300000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at a000 [size=256]
Expansion ROM at fe340000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
DRM and fglrx Informations from dmesg:
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb0000000-0xb3ffffff]
(65536KB)
[ 1.197306] PCI-DMA: Disabling AGP.
[ 1.197370] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.204072] Linux agpgart interface v0.103
[ 4.311971] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 4.350837] <6>[fglrx] Maximum main memory to use for locked dma buffers:
7656 MBytes.
[ 4.351277] <6>[fglrx] vendor: 1002 device: 6819 revision: 0 count: 1
[ 4.351282] <6>[fglrx] vendor: 1002 device: 6819 revision: 0 count: 2
[ 4.351946] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 4.352041] <6>[fglrx] ioport: bar 4, base 0xa000, size: 0x100
[ 4.352465] <6>[fglrx] Kernel PAT support is enabled
[ 4.352486] <6>[fglrx] module loaded - fglrx 15.20.3 [Jun 22 2015] with 2
minors
[ 6.141835] <6>[fglrx] Firegl kernel thread PID: 991
[ 6.141890] <6>[fglrx] Firegl kernel thread PID: 992
[ 6.141943] <6>[fglrx] Firegl kernel thread PID: 993
[ 6.142054] <6>[fglrx] IRQ 57 Enabled
[ 6.152701] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 6.152704] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[ 6.152706] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000,
size:548000
[ 6.152708] <6>[fglrx] Reserved FB block: Unshared offset:7ffee000,
size:12000
[ 6.396343] <6>[fglrx] Firegl kernel thread PID: 1015
[ 6.396405] <6>[fglrx] Firegl kernel thread PID: 1016
[ 6.396468] <6>[fglrx] Firegl kernel thread PID: 1017
[ 6.396595] <6>[fglrx] IRQ 58 Enabled
[ 6.407172] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 6.407175] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[ 6.407176] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000,
size:548000
[ 6.407178] <6>[fglrx] Reserved FB block: Unshared offset:7fff3000,
size:d000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1297 Aug 10 14:19 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]-0"
Driver "fglrx"
BusID "PCI:8:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]-0"
Device "aticonfig-Device[1]-0"
Monitor "aticonfig-Monitor[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 65496 Aug 19 03:24 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[ 5.488]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 5.488] X Protocol Version 11, Revision 0
[ 5.488] Build Operating System: Linux 4.1.0 x86_64 Debian
[ 5.488] Current Operating System: Linux livingroom 4.0.0-2-amd64 #1 SMP
Debian 4.0.8-2 (2015-07-22) x86_64
[ 5.488] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64
root=UUID=e26b0d1e-661c-4ee3-8e0b-e1bf691fe8df ro rootflags=data=writeback
selinux=1 security=selinux nomodeset quiet
[ 5.488] Build Date: 11 August 2015 10:51:15AM
[ 5.488] xorg-server 2:1.17.2-1.1 (http://www.debian.org/support)
[ 5.488] Current version of pixman: 0.32.6
[ 5.488] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.488] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.488] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 19 03:23:57
2015
[ 5.493] (==) Using config file: "/etc/X11/xorg.conf"
[ 5.493] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.499] (==) ServerLayout "aticonfig Layout"
[ 5.499] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 5.499] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 5.499] (**) | |-->Device "aticonfig-Device[0]-0"
[ 5.499] (**) |-->Screen "aticonfig-Screen[1]-0" (1)
[ 5.499] (**) | |-->Monitor "aticonfig-Monitor[1]-0"
[ 5.499] (**) | |-->Device "aticonfig-Device[1]-0"
[ 5.499] (==) Automatically adding devices
[ 5.499] (==) Automatically enabling devices
[ 5.499] (==) Automatically adding GPU devices
[ 5.504] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5.504] Entry deleted from font path.
[ 5.512] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 5.512] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.512] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 5.512] (II) Loader magic: 0x7f2816732d40
[ 5.512] (II) Module ABI versions:
[ 5.512] X.Org ANSI C Emulation: 0.4
[ 5.512] X.Org Video Driver: 19.0
[ 5.512] X.Org XInput driver : 21.0
[ 5.512] X.Org Server Extension : 9.0
[ 5.514] (--) PCI:*(0:1:0:0) 1002:6819:174b:a001 rev 0, Mem @
0xd0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @
0x????????/131072
[ 5.514] (--) PCI: (0:8:0:0) 1002:6819:174b:a001 rev 0, Mem @
0xc0000000/268435456, 0xfe300000/262144, I/O @ 0x0000a000/256, BIOS @
0x????????/131072
[ 5.515] (II) "glx" will be loaded by default.
[ 5.515] (II) LoadModule: "glx"
[ 5.518] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 5.522] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 5.522] compiled for 6.9.0, module version = 1.0.0
[ 5.522] (II) LoadModule: "fglrx"
[ 5.523] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 5.695] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 5.695] compiled for 1.4.99.906, module version = 15.20.3
[ 5.695] Module class: X.Org Video Driver
[ 5.696] (II) Loading sub module "fglrxdrm"
[ 5.696] (II) LoadModule: "fglrxdrm"
[ 5.696] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 5.701] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 5.701] compiled for 1.4.99.906, module version = 15.20.3
[ 5.701] (II) AMD Proprietary Linux Driver Version Identifier:15.20.3
[ 5.701] (II) AMD Proprietary Linux Driver Release Identifier: 15.20.1046
[ 5.701] (II) AMD Proprietary Linux Driver Build Date: Jun 22 2015 21:28:37
[ 5.701] (++) using VT number 7
[ 5.705] (WW) Falling back to old probe method for fglrx
[ 5.719] (II) Loading PCS database from /etc/ati/amdpcsdb
/etc/ati/amdpcsdb.default
[ 5.721] ukiDynamicMajor: found major device number 246
[ 5.721] ukiDynamicMajor: found major device number 246
[ 5.721] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 5.721] ukiOpenDevice: node name is /dev/ati/card0
[ 5.721] ukiOpenDevice: open result is 9, (OK)
[ 5.782] ukiOpenByBusid: ukiOpenMinor returns 9
[ 5.782] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 5.783] ukiDynamicMajor: found major device number 246
[ 5.783] ukiDynamicMajor: found major device number 246
[ 5.783] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 5.783] ukiOpenDevice: node name is /dev/ati/card0
[ 5.783] ukiOpenDevice: open result is 9, (OK)
[ 5.783] ukiOpenByBusid: ukiOpenMinor returns 9
[ 5.783] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 5.783] ukiOpenDevice: node name is /dev/ati/card1
[ 6.036] ukiOpenDevice: open result is 9, (OK)
[ 6.036] ukiOpenByBusid: ukiOpenMinor returns 9
[ 6.036] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 6.062] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 6.062] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:0:0) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:2:0) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:4:0) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:5:0) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:6:0) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:7:0) found
[ 6.063] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:9:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:10:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:11:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:13:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:17:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:18:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:18:2) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:19:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:19:2) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:20:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:20:2) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:20:3) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:20:4) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:20:5) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:21:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:21:1) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:22:0) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@0:22:2) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@1:0:1) found
[ 6.064] (WW) fglrx: No matching Device section for instance (BusID
PCI:0@8:0:1) found
[ 6.064] (II) fglrx(0): pEnt->device->identifier=0x7f281662b090
[ 6.064] (II) fglrx(1): pEnt->device->identifier=0x7f281662b3b0
[ 6.064] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin
[ 6.064] (II) fglrx(0): FB driver is not enabled
[ 6.065] (II) Loading sub module "vgahw"
[ 6.065] (II) LoadModule: "vgahw"
[ 6.066] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 6.066] (II) Module vgahw: vendor="X.Org Foundation"
[ 6.067] compiled for 1.17.2, module version = 0.1.0
[ 6.067] ABI class: X.Org Video Driver, version 19.0
[ 6.068] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 6.068] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp
pixmaps)
[ 6.068] (==) fglrx(0): Default visual is TrueColor
[ 6.068] (**) fglrx(0): Option "DPMS" "true"
[ 6.068] (==) fglrx(0): RGB weight 888
[ 6.068] (II) fglrx(0): Using 8 bits per RGB
[ 6.068] (==) fglrx(0): Buffer Tiling is ON
[ 6.069] (II) Loading sub module "fglrxdrm"
[ 6.069] (II) LoadModule: "fglrxdrm"
[ 6.069] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.069] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.069] compiled for 1.4.99.906, module version = 15.20.3
[ 6.070] ukiDynamicMajor: found major device number 246
[ 6.070] ukiDynamicMajor: found major device number 246
[ 6.070] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 6.070] ukiOpenDevice: node name is /dev/ati/card0
[ 6.070] ukiOpenDevice: open result is 11, (OK)
[ 6.070] ukiOpenByBusid: ukiOpenMinor returns 11
[ 6.071] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 6.071] (**) fglrx(0): NoAccel = NO
[ 6.071] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 6.071] (--) fglrx(0): Chipset: "AMD Radeon R7 200 Series "
(Chipset = 0x6819)
[ 6.071] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xa001)
[ 6.071] (==) fglrx(0): board vendor info: third party graphics adapter -
NOT original AMD
[ 6.071] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 6.071] (--) fglrx(0): MMIO registers at 0xfea00000
[ 6.071] (--) fglrx(0): I/O port at 0x0000e000
[ 6.071] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 6.072] (II) fglrx(0): AC Adapter is used
[ 6.074] (EE) fglrx(0): Cannot read int vect
[ 6.171] (II) Loading sub module "vbe"
[ 6.171] (II) LoadModule: "vbe"
[ 6.172] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 6.172] (II) Module vbe: vendor="X.Org Foundation"
[ 6.172] compiled for 1.17.2, module version = 1.1.0
[ 6.172] ABI class: X.Org Video Driver, version 19.0
[ 6.172] (II) Loading sub module "int10"
[ 6.172] (II) LoadModule: "int10"
[ 6.173] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 6.174] (II) Module int10: vendor="X.Org Foundation"
[ 6.174] compiled for 1.17.2, module version = 1.0.0
[ 6.174] ABI class: X.Org Video Driver, version 19.0
[ 6.174] (II) fglrx(0): initializing int10
[ 6.174] (EE) fglrx(0): Cannot read int vect
[ 6.174] (WW) fglrx(0): GetVBEMode failed
[ 6.174] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 6.174] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 6.174] (II) fglrx(0): PCIE card detected
[ 6.174] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 6.174] (WW) fglrx(0): board is an unknown third party board, chipset is
supported
[ 6.174] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize =
0x80000000)
[ 6.174] (II) fglrx(0): RandR 1.2 support is enabled!
[ 6.174] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 6.174] (II) Loading sub module "fb"
[ 6.174] (II) LoadModule: "fb"
[ 6.175] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.176] (II) Module fb: vendor="X.Org Foundation"
[ 6.176] compiled for 1.17.2, module version = 1.0.0
[ 6.176] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.176] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 6.176] (II) Loading sub module "ddc"
[ 6.176] (II) LoadModule: "ddc"
[ 6.176] (II) Module "ddc" already built-in
[ 6.556] (II) fglrx(0): Output DFP1 using monitor section
aticonfig-Monitor[0]-0
[ 6.556] (II) fglrx(0): Output DFP2 has no monitor section
[ 6.556] (II) fglrx(0): Output DFP3 has no monitor section
[ 6.556] (II) fglrx(0): Output DFP4 has no monitor section
[ 6.556] (II) fglrx(0): Output DFP5 has no monitor section
[ 6.556] (II) fglrx(0): Output DFP6 has no monitor section
[ 6.556] (II) fglrx(0): Output DFP7 has no monitor section
[ 6.556] (II) fglrx(0): Output CRT1 has no monitor section
[ 6.556] (II) Loading sub module "ddc"
[ 6.556] (II) LoadModule: "ddc"
[ 6.556] (II) Module "ddc" already built-in
[ 6.556] (II) fglrx(0): Connected Display0: CRT1
[ 6.556] (II) fglrx(0): Display0 EDID data ---------------------------
[ 6.556] (II) fglrx(0): Manufacturer: AOC Model: 1950 Serial#: 0
[ 6.556] (II) fglrx(0): Year: 2011 Week: 0
[ 6.556] (II) fglrx(0): EDID Version: 1.3
[ 6.556] (II) fglrx(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 6.556] (II) fglrx(0): Sync: Separate
[ 6.556] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 6.556] (II) fglrx(0): Gamma: 2.20
[ 6.556] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 6.556] (II) fglrx(0): First detailed timing is preferred mode
[ 6.556] (II) fglrx(0): redX: 0.634 redY: 0.351 greenX: 0.334 greenY:
0.604
[ 6.556] (II) fglrx(0): blueX: 0.146 blueY: 0.059 whiteX: 0.312 whiteY:
0.328
[ 6.556] (II) fglrx(0): Supported established timings:
[ 6.556] (II) fglrx(0): 720x400@70Hz
[ 6.556] (II) fglrx(0): 640x480@60Hz
[ 6.556] (II) fglrx(0): 640x480@67Hz
[ 6.556] (II) fglrx(0): 640x480@72Hz
[ 6.556] (II) fglrx(0): 640x480@75Hz
[ 6.556] (II) fglrx(0): 800x600@56Hz
[ 6.556] (II) fglrx(0): 800x600@60Hz
[ 6.556] (II) fglrx(0): 800x600@72Hz
[ 6.556] (II) fglrx(0): 800x600@75Hz
[ 6.556] (II) fglrx(0): 832x624@75Hz
[ 6.556] (II) fglrx(0): 1024x768@60Hz
[ 6.556] (II) fglrx(0): 1024x768@70Hz
[ 6.557] (II) fglrx(0): 1024x768@75Hz
[ 6.557] (II) fglrx(0): Manufacturer's mask: 0
[ 6.557] (II) fglrx(0): Supported standard timings:
[ 6.557] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 6.557] (II) fglrx(0): #1: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 6.557] (II) fglrx(0): Supported detailed timing:
[ 6.557] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 6.557] (II) fglrx(0): h_active: 1366 h_sync: 1436 h_sync_end 1579
h_blank_end 1792 h_border: 0
[ 6.557] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 774
v_blanking: 798 v_border: 0
[ 6.557] (II) fglrx(0): Supported detailed timing:
[ 6.557] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 6.557] (II) fglrx(0): h_active: 1360 h_sync: 1424 h_sync_end 1536
h_blank_end 1792 h_border: 0
[ 6.557] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 795 v_border: 0
[ 6.557] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 60
kHz, PixClock max 95 MHz
[ 6.557] (II) fglrx(0): Monitor name: 1950W
[ 6.557] (II) fglrx(0): EDID (in hex):
[ 6.557] (II) fglrx(0): 00ffffffffffff0005e3501900000000
[ 6.557] (II) fglrx(0): 00150103682917782a7b40a259559a25
[ 6.557] (II) fglrx(0): 0f5054bfee0081c0310a010101010101
[ 6.557] (II) fglrx(0): 010101010101662156aa51001e30468f
[ 6.557] (II) fglrx(0): 33009ae61000001e662150b051001b30
[ 6.557] (II) fglrx(0): 407036009ae61000001e000000fd0032
[ 6.557] (II) fglrx(0): 4c1e3c09000a202020202020000000fc
[ 6.557] (II) fglrx(0): 0031393530570a202020202020200059
[ 6.557] (II) fglrx(0): End of Display0 EDID data --------------------
[ 6.557] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 6.557] (II) fglrx(0): EDID for output DFP1
[ 6.557] (II) fglrx(0): EDID for output DFP2
[ 6.557] (II) fglrx(0): EDID for output DFP3
[ 6.557] (II) fglrx(0): EDID for output DFP4
[ 6.557] (II) fglrx(0): EDID for output DFP5
[ 6.557] (II) fglrx(0): EDID for output DFP6
[ 6.557] (II) fglrx(0): EDID for output DFP7
[ 6.557] (II) fglrx(0): EDID for output CRT1
[ 6.557] (II) fglrx(0): Manufacturer: AOC Model: 1950 Serial#: 0
[ 6.558] (II) fglrx(0): Year: 2011 Week: 0
[ 6.558] (II) fglrx(0): EDID Version: 1.3
[ 6.558] (II) fglrx(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 6.558] (II) fglrx(0): Sync: Separate
[ 6.558] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 6.558] (II) fglrx(0): Gamma: 2.20
[ 6.558] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 6.558] (II) fglrx(0): First detailed timing is preferred mode
[ 6.558] (II) fglrx(0): redX: 0.634 redY: 0.351 greenX: 0.334 greenY:
0.604
[ 6.558] (II) fglrx(0): blueX: 0.146 blueY: 0.059 whiteX: 0.312 whiteY:
0.328
[ 6.558] (II) fglrx(0): Supported established timings:
[ 6.558] (II) fglrx(0): 720x400@70Hz
[ 6.558] (II) fglrx(0): 640x480@60Hz
[ 6.558] (II) fglrx(0): 640x480@67Hz
[ 6.558] (II) fglrx(0): 640x480@72Hz
[ 6.558] (II) fglrx(0): 640x480@75Hz
[ 6.558] (II) fglrx(0): 800x600@56Hz
[ 6.558] (II) fglrx(0): 800x600@60Hz
[ 6.558] (II) fglrx(0): 800x600@72Hz
[ 6.558] (II) fglrx(0): 800x600@75Hz
[ 6.558] (II) fglrx(0): 832x624@75Hz
[ 6.558] (II) fglrx(0): 1024x768@60Hz
[ 6.558] (II) fglrx(0): 1024x768@70Hz
[ 6.558] (II) fglrx(0): 1024x768@75Hz
[ 6.558] (II) fglrx(0): Manufacturer's mask: 0
[ 6.558] (II) fglrx(0): Supported standard timings:
[ 6.558] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 6.558] (II) fglrx(0): #1: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 6.558] (II) fglrx(0): Supported detailed timing:
[ 6.558] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 6.558] (II) fglrx(0): h_active: 1366 h_sync: 1436 h_sync_end 1579
h_blank_end 1792 h_border: 0
[ 6.558] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 774
v_blanking: 798 v_border: 0
[ 6.558] (II) fglrx(0): Supported detailed timing:
[ 6.558] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 6.558] (II) fglrx(0): h_active: 1360 h_sync: 1424 h_sync_end 1536
h_blank_end 1792 h_border: 0
[ 6.558] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 795 v_border: 0
[ 6.558] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 60
kHz, PixClock max 95 MHz
[ 6.558] (II) fglrx(0): Monitor name: 1950W
[ 6.558] (II) fglrx(0): EDID (in hex):
[ 6.558] (II) fglrx(0): 00ffffffffffff0005e3501900000000
[ 6.558] (II) fglrx(0): 00150103682917782a7b40a259559a25
[ 6.558] (II) fglrx(0): 0f5054bfee0081c0310a010101010101
[ 6.558] (II) fglrx(0): 010101010101662156aa51001e30468f
[ 6.558] (II) fglrx(0): 33009ae61000001e662150b051001b30
[ 6.558] (II) fglrx(0): 407036009ae61000001e000000fd0032
[ 6.558] (II) fglrx(0): 4c1e3c09000a202020202020000000fc
[ 6.558] (II) fglrx(0): 0031393530570a202020202020200059
[ 6.559] (II) fglrx(0): Printing probed modes for output CRT1
[ 6.559] (II) fglrx(0): Modeline "1366x768"x60.0 85.50 1366 1436 1579
1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 6.559] (II) fglrx(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536
1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.559] (II) fglrx(0): Modeline "1280x768"x60.0 85.50 1280 1424 1536
1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.559] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 6.559] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.559] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.559] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.559] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.559] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.559] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.559] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.559] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832
480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 6.559] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.559] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816
480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 6.559] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.559] (II) fglrx(0): Output DFP1 disconnected
[ 6.559] (II) fglrx(0): Output DFP2 disconnected
[ 6.559] (II) fglrx(0): Output DFP3 disconnected
[ 6.559] (II) fglrx(0): Output DFP4 disconnected
[ 6.559] (II) fglrx(0): Output DFP5 disconnected
[ 6.559] (II) fglrx(0): Output DFP6 disconnected
[ 6.559] (II) fglrx(0): Output DFP7 disconnected
[ 6.560] (II) fglrx(0): Output CRT1 connected
[ 6.560] (II) fglrx(0): Using exact sizes for initial modes
[ 6.560] (II) fglrx(0): Output CRT1 using initial mode 1366x768
[ 6.560] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 6.560] (II) fglrx(0): DPI set to (96, 96)
[ 6.560] (II) fglrx(0): Eyefinity capable adapter detected.
[ 6.560] (II) fglrx(0): Adapter AMD Radeon R7 200 Series has
6 configurable heads and 1 displays connected.
[ 6.560] (==) fglrx(0): PseudoColor visuals disabled
[ 6.560] (II) Loading sub module "ramdac"
[ 6.560] (II) LoadModule: "ramdac"
[ 6.560] (II) Module "ramdac" already built-in
[ 6.560] (==) fglrx(0): NoDRI = NO
[ 6.560] (==) fglrx(0): Capabilities: 0x00000000
[ 6.560] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 6.560] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 6.560] (==) fglrx(0): UseFastTLS=0
[ 6.560] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 6.560] (II) fglrx(1): === [xdl_xs117_atiddxPreInit] === begin
[ 6.560] (II) fglrx(1): FB driver is not enabled
[ 6.560] (**) fglrx(1): Depth 24, (--) framebuffer bpp 32
[ 6.560] (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp
pixmaps)
[ 6.560] (==) fglrx(1): Default visual is TrueColor
[ 6.560] (**) fglrx(1): Option "DPMS" "true"
[ 6.560] (==) fglrx(1): RGB weight 888
[ 6.560] (II) fglrx(1): Using 8 bits per RGB
[ 6.560] (==) fglrx(1): Buffer Tiling is ON
[ 6.560] (II) Loading sub module "fglrxdrm"
[ 6.560] (II) LoadModule: "fglrxdrm"
[ 6.560] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.560] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.560] compiled for 1.4.99.906, module version = 15.20.3
[ 6.562] ukiDynamicMajor: found major device number 246
[ 6.562] ukiDynamicMajor: found major device number 246
[ 6.562] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 6.562] ukiOpenDevice: node name is /dev/ati/card0
[ 6.562] ukiOpenDevice: open result is 12, (OK)
[ 6.562] ukiOpenByBusid: ukiOpenMinor returns 12
[ 6.562] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 6.562] ukiOpenDevice: node name is /dev/ati/card1
[ 6.562] ukiOpenDevice: open result is 12, (OK)
[ 6.562] ukiOpenByBusid: ukiOpenMinor returns 12
[ 6.562] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 6.562] (WW) fglrx(1): Unable to register ADL handler for 0x00C00000
[ 6.562] (**) fglrx(1): NoAccel = NO
[ 6.562] (**) fglrx(1): AMD 2D Acceleration Architecture enabled
[ 6.562] (--) fglrx(1): Chipset: "AMD Radeon R7 200 Series "
(Chipset = 0x6819)
[ 6.562] (--) fglrx(1): (PciSubVendor = 0x174b, PciSubDevice = 0xa001)
[ 6.562] (==) fglrx(1): board vendor info: third party graphics adapter -
NOT original AMD
[ 6.562] (--) fglrx(1): Linear framebuffer (phys) at 0xc0000000
[ 6.562] (--) fglrx(1): MMIO registers at 0xfe300000
[ 6.562] (--) fglrx(1): I/O port at 0x0000a000
[ 6.562] (==) fglrx(1): ROM-BIOS at 0x000c0000
[ 6.562] (II) fglrx(0): AC Adapter is used
[ 6.562] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 6.563] (--) fglrx(1): Video RAM: 2097152 kByte, Type: GDDR5
[ 6.563] (II) fglrx(1): PCIE card detected
[ 6.563] (--) fglrx(1): Using per-process page tables (PPPT) as GART.
[ 6.563] (WW) fglrx(1): board is an unknown third party board, chipset is
supported
[ 6.563] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize =
0x80000000)
[ 6.563] (II) fglrx(1): RandR 1.2 support is enabled!
[ 6.563] (II) fglrx(1): RandR 1.2 rotation support is enabled!
[ 6.563] (II) Loading sub module "fb"
[ 6.563] (II) LoadModule: "fb"
[ 6.563] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.563] (II) Module fb: vendor="X.Org Foundation"
[ 6.563] compiled for 1.17.2, module version = 1.0.0
[ 6.563] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.563] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 6.563] (II) Loading sub module "ddc"
[ 6.563] (II) LoadModule: "ddc"
[ 6.563] (II) Module "ddc" already built-in
[ 6.622] (II) fglrx(1): Output DFP1 using monitor section
aticonfig-Monitor[1]-0
[ 6.622] (II) fglrx(1): Output DFP2 has no monitor section
[ 6.622] (II) fglrx(1): Output DFP3 has no monitor section
[ 6.622] (II) fglrx(1): Output DFP4 has no monitor section
[ 6.622] (II) fglrx(1): Output DFP5 has no monitor section
[ 6.622] (II) fglrx(1): Output DFP6 has no monitor section
[ 6.622] (II) fglrx(1): Output DFP7 has no monitor section
[ 6.622] (II) fglrx(1): Output CRT1 has no monitor section
[ 6.623] (II) Loading sub module "ddc"
[ 6.623] (II) LoadModule: "ddc"
[ 6.623] (II) Module "ddc" already built-in
[ 6.623] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 6.623] (II) fglrx(1): EDID for output DFP1
[ 6.623] (II) fglrx(1): EDID for output DFP2
[ 6.623] (II) fglrx(1): EDID for output DFP3
[ 6.623] (II) fglrx(1): EDID for output DFP4
[ 6.623] (II) fglrx(1): EDID for output DFP5
[ 6.623] (II) fglrx(1): EDID for output DFP6
[ 6.623] (II) fglrx(1): EDID for output DFP7
[ 6.623] (II) fglrx(1): Printing probed modes for output CRT1
[ 6.623] (II) fglrx(1): Modeline "1600x1200"x60.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP)
[ 6.623] (II) fglrx(1): Modeline "1400x1050"x60.0 122.61 1400 1488 1640
1880 1050 1051 1054 1087 -hsync +vsync (65.2 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1600x900"x60.0 108.00 1600 1624 1704
1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1440x900"x60.0 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1280x960"x60.0 102.10 1280 1360 1496
1712 960 961 964 994 -hsync +vsync (59.6 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1366x768"x60.0 85.50 1366 1436 1579
1792 768 771 774 798 +hsync +vsync (47.7 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1360x768"x60.0 85.50 1360 1424 1536
1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1280x800"x60.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1152x864"x60.0 81.62 1152 1216 1336
1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1280x768"x60.0 79.50 1280 1344 1472
1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1280x720"x60.0 74.25 1280 1390 1430
1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.623] (II) fglrx(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.623] (II) fglrx(1): Modeline "800x600"x60.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.623] (II) fglrx(1): Modeline "720x480"x60.0 27.03 720 736 798 858
480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.623] (II) fglrx(1): Modeline "640x480"x60.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.623] (II) fglrx(1): Output DFP1 disconnected
[ 6.623] (II) fglrx(1): Output DFP2 disconnected
[ 6.623] (II) fglrx(1): Output DFP3 disconnected
[ 6.623] (II) fglrx(1): Output DFP4 disconnected
[ 6.623] (II) fglrx(1): Output DFP5 disconnected
[ 6.623] (II) fglrx(1): Output DFP6 disconnected
[ 6.623] (II) fglrx(1): Output DFP7 disconnected
[ 6.623] (II) fglrx(1): Output CRT1 connected
[ 6.623] (II) fglrx(1): Using exact sizes for initial modes
[ 6.623] (II) fglrx(1): Output CRT1 using initial mode 1600x1200
[ 6.623] (II) fglrx(1): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 6.623] (II) fglrx(1): DPI set to (96, 96)
[ 6.623] (WW) fglrx(0): Unable to register ADL handler for 0x00110000
[ 6.623] (WW) fglrx(0): Unable to register ADL handler for 0x00120000
[ 6.623] (WW) fglrx(0): Unable to register ADL handler for 0x00130000
[ 6.623] (WW) fglrx(0): Unable to register ADL handler for 0x00150000
[ 6.623] (II) fglrx(1): Eyefinity capable adapter detected.
[ 6.623] (II) fglrx(1): Adapter AMD Radeon R7 200 Series has
6 configurable heads and 0 displays connected.
[ 6.623] (==) fglrx(1): PseudoColor visuals disabled
[ 6.623] (II) Loading sub module "ramdac"
[ 6.623] (II) LoadModule: "ramdac"
[ 6.623] (II) Module "ramdac" already built-in
[ 6.623] (==) fglrx(1): NoDRI = NO
[ 6.624] (==) fglrx(1): Capabilities: 0x00000000
[ 6.624] (==) fglrx(1): CapabilitiesEx: 0x00000000
[ 6.624] (==) fglrx(1): OpenGL ClientDriverName: "fglrx_dri.so"
[ 6.624] (==) fglrx(1): UseFastTLS=0
[ 6.624] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 6.624] (--) Depth 24 pixmap format is 32 bpp
[ 6.624] (II) fglrx(0): doing swlDriScreenInit
[ 6.624] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 6.624] ukiDynamicMajor: found major device number 246
[ 6.624] ukiDynamicMajor: found major device number 246
[ 6.624] ukiDynamicMajor: found major device number 246
[ 6.624] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 6.624] ukiOpenDevice: node name is /dev/ati/card0
[ 6.624] ukiOpenDevice: open result is 13, (OK)
[ 6.624] ukiOpenByBusid: ukiOpenMinor returns 13
[ 6.624] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 6.624] (II) fglrx(0): [uki] DRM interface version 1.0
[ 6.624] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 6.624] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 6.624] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f281672a000
[ 6.624] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 6.624] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 6.624] (II) fglrx(0): swlDriScreenInit done
[ 6.624] (II) fglrx(0): Kernel Module Version Information:
[ 6.624] (II) fglrx(0): Name: fglrx
[ 6.624] (II) fglrx(0): Version: 15.20.3
[ 6.624] (II) fglrx(0): Date: Jun 22 2015
[ 6.624] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 6.624] (II) fglrx(0): Kernel Module version matches driver.
[ 6.624] (II) fglrx(0): Kernel Module Build Time Information:
[ 6.624] (II) fglrx(0): Build-Kernel UTS_RELEASE: 4.0.0-2-amd64
[ 6.624] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 6.624] (II) fglrx(0): Build-Kernel __SMP__: no
[ 6.624] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 6.624] (II) fglrx(0): [uki] register handle = 0x00004000
[ 6.653] (II) fglrx(0): DRI initialization successfull
[ 6.657] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01080000
[ 6.659] (==) fglrx(0): Backing store enabled
[ 6.659] (**) fglrx(0): DPMS enabled
[ 6.659] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 6.659] (**) fglrx(0): Textured Video is enabled.
[ 6.660] (II) LoadModule: "glesx"
[ 6.660] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 6.700] (II) Module glesx: vendor="X.Org Foundation"
[ 6.700] compiled for 1.4.99.906, module version = 1.0.0
[ 6.700] (II) fglrx(0): GLESX enableFlags = 8784
[ 6.700] (II) fglrx(0): GLESX is enabled
[ 6.700] (II) LoadModule: "amdxmm"
[ 6.701] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 6.714] (II) Module amdxmm: vendor="X.Org Foundation"
[ 6.714] compiled for 1.4.99.906, module version = 2.0.0
[ 6.727] (II) fglrx(0): Enable composite support successfully
[ 6.727] (WW) fglrx(0): Option "VendorName" is not used
[ 6.727] (WW) fglrx(0): Option "ModelName" is not used
[ 6.727] (II) fglrx(0): X context handle = 0x1
[ 6.727] (II) fglrx(0): [DRI] installation complete
[ 6.727] (==) fglrx(0): Silken mouse enabled
[ 6.728] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 6.728] (II) fglrx(0): LPT is disabled by configure option
[ 6.728] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 6.856] (--) RandR disabled
[ 6.856] (II) fglrx(1): doing swlDriScreenInit
[ 6.856] (II) fglrx(1): swlDriScreenInit for fglrx driver
[ 6.856] ukiDynamicMajor: found major device number 246
[ 6.856] ukiDynamicMajor: found major device number 246
[ 6.856] ukiDynamicMajor: found major device number 246
[ 6.856] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 6.856] ukiOpenDevice: node name is /dev/ati/card0
[ 6.857] ukiOpenDevice: open result is 14, (OK)
[ 6.857] ukiOpenByBusid: ukiOpenMinor returns 14
[ 6.857] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 6.857] ukiOpenDevice: node name is /dev/ati/card1
[ 6.857] ukiOpenDevice: open result is 14, (OK)
[ 6.857] ukiOpenByBusid: ukiOpenMinor returns 14
[ 6.857] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 6.857] (II) fglrx(1): [uki] DRM interface version 1.0
[ 6.857] (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:8:0:0"
[ 6.857] (II) fglrx(1): [uki] added 8192 byte SAREA at 0x18000
[ 6.857] (II) fglrx(1): [uki] mapped SAREA 0x18000 to 0x7f280da68000
[ 6.857] (II) fglrx(1): [uki] framebuffer handle = 0x19000
[ 6.857] (II) fglrx(1): [uki] added 1 reserved context for kernel
[ 6.857] (II) fglrx(1): swlDriScreenInit done
[ 6.857] (II) fglrx(1): Kernel Module Version Information:
[ 6.857] (II) fglrx(1): Name: fglrx
[ 6.857] (II) fglrx(1): Version: 15.20.3
[ 6.857] (II) fglrx(1): Date: Jun 22 2015
[ 6.857] (II) fglrx(1): Desc: AMD FireGL DRM kernel module
[ 6.857] (II) fglrx(1): Kernel Module version matches driver.
[ 6.857] (II) fglrx(1): Kernel Module Build Time Information:
[ 6.857] (II) fglrx(1): Build-Kernel UTS_RELEASE: 4.0.0-2-amd64
[ 6.857] (II) fglrx(1): Build-Kernel MODVERSIONS: no
[ 6.857] (II) fglrx(1): Build-Kernel __SMP__: no
[ 6.857] (II) fglrx(1): Build-Kernel PAGE_SIZE: 0x1000
[ 6.857] (II) fglrx(1): [uki] register handle = 0x0001a000
[ 6.857] (II) fglrx(1): Display width adjusted to to 1664 due to alignment
constraints
[ 6.857] (II) fglrx(1): DRI initialization successfull
[ 6.857] (II) fglrx(1): FBADPhys: 0xf400000000 FBMappedSize: 0x01110000
[ 6.857] (==) fglrx(1): Backing store enabled
[ 6.857] (**) fglrx(1): DPMS enabled
[ 6.857] (**) fglrx(1): Textured Video is enabled.
[ 6.857] (II) fglrx(1): GLESX enableFlags = 8784
[ 6.857] (II) fglrx(1): GLESX is enabled
[ 6.869] (II) fglrx(1): Enable composite support successfully
[ 6.869] (WW) fglrx(1): Option "VendorName" is not used
[ 6.869] (WW) fglrx(1): Option "ModelName" is not used
[ 6.869] (II) fglrx(1): X context handle = 0x1
[ 6.869] (II) fglrx(1): [DRI] installation complete
[ 6.869] (==) fglrx(1): Silken mouse enabled
[ 6.869] (==) fglrx(1): Using HW cursor of display infrastructure!
[ 6.870] (II) fglrx(1): LPT is disabled by configure option
[ 6.870] (II) fglrx(1): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 7.080] (--) RandR disabled
[ 7.176] (II) SELinux: Disabled on system
[ 7.177] ukiDynamicMajor: found major device number 246
[ 7.177] ukiDynamicMajor: found major device number 246
[ 7.177] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7.177] ukiOpenDevice: node name is /dev/ati/card0
[ 7.177] ukiOpenDevice: open result is 15, (OK)
[ 7.177] ukiOpenByBusid: ukiOpenMinor returns 15
[ 7.177] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7.177] (EE) AIGLX error: failed to open
/usr/X11R6/lib64/modules/dri/fglrx_dri.so,
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object
file: No such file or directory]
[ 7.178] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so,
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file
or directory]
[ 7.178] (EE) AIGLX error: failed to open
/usr/X11R6/lib/modules/dri/fglrx_dri.so,
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file:
No such file or directory]
[ 7.730] ukiDynamicMajor: found major device number 246
[ 7.730] ukiDynamicMajor: found major device number 246
[ 7.731] ukiDynamicMajor: found major device number 246
[ 7.731] ukiOpenDevice: node name is /dev/ati/card0
[ 7.731] ukiOpenDevice: open result is 16, (OK)
[ 7.731] ukiGetBusid returned 'PCI:1:0:0'
[ 7.731] ukiOpenDevice: node name is /dev/ati/card1
[ 7.731] ukiOpenDevice: open result is 16, (OK)
[ 7.731] ukiGetBusid returned 'PCI:8:0:0'
[ 7.731] ukiOpenDevice: node name is /dev/ati/card2
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card3
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card4
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card5
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card6
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card7
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card8
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card9
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card10
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card11
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card12
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card13
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card14
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiOpenDevice: node name is /dev/ati/card15
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: open result is -1, (No such device)
[ 7.731] ukiOpenDevice: Open failed
[ 7.731] ukiDynamicMajor: found major device number 246
[ 7.731] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7.731] ukiOpenDevice: node name is /dev/ati/card0
[ 7.731] ukiOpenDevice: open result is 16, (OK)
[ 7.731] ukiOpenByBusid: ukiOpenMinor returns 16
[ 7.731] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7.909] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 0
[ 7.913] ukiDynamicMajor: found major device number 246
[ 7.913] ukiDynamicMajor: found major device number 246
[ 7.913] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 7.913] ukiOpenDevice: node name is /dev/ati/card0
[ 7.913] ukiOpenDevice: open result is 17, (OK)
[ 7.913] ukiOpenByBusid: ukiOpenMinor returns 17
[ 7.914] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7.914] ukiOpenDevice: node name is /dev/ati/card1
[ 7.914] ukiOpenDevice: open result is 17, (OK)
[ 7.914] ukiOpenByBusid: ukiOpenMinor returns 17
[ 7.914] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 7.920] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 1
[ 7.921] ukiDynamicMajor: found major device number 246
[ 7.921] ukiDynamicMajor: found major device number 246
[ 7.921] ukiDynamicMajor: found major device number 246
[ 7.921] ukiOpenDevice: node name is /dev/ati/card0
[ 7.921] ukiOpenDevice: open result is 18, (OK)
[ 7.921] ukiGetBusid returned 'PCI:1:0:0'
[ 7.921] ukiOpenDevice: node name is /dev/ati/card1
[ 7.921] ukiOpenDevice: open result is 18, (OK)
[ 7.921] ukiGetBusid returned 'PCI:8:0:0'
[ 7.921] ukiOpenDevice: node name is /dev/ati/card2
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card3
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card4
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card5
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card6
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card7
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card8
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card9
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card10
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card11
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card12
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card13
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.921] ukiOpenDevice: node name is /dev/ati/card14
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: open result is -1, (No such device)
[ 7.921] ukiOpenDevice: Open failed
[ 7.922] ukiOpenDevice: node name is /dev/ati/card15
[ 7.922] ukiOpenDevice: open result is -1, (No such device)
[ 7.922] ukiOpenDevice: open result is -1, (No such device)
[ 7.922] ukiOpenDevice: Open failed
[ 7.922] ukiDynamicMajor: found major device number 246
[ 7.922] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7.922] ukiOpenDevice: node name is /dev/ati/card0
[ 7.922] ukiOpenDevice: open result is 18, (OK)
[ 7.922] ukiOpenByBusid: ukiOpenMinor returns 18
[ 7.922] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7.987] (II) fglrx(0): OverDrive5 Detected!
[ 7.989] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 8.002] (II) fglrx(0): OverDrive5 Detected!
[ 8.006] (II) fglrx(1): Setting screen physical size to 423 x 317
[ 8.085] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 8.085] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.085] (II) LoadModule: "evdev"
[ 8.085] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 8.111] (II) Module evdev: vendor="X.Org Foundation"
[ 8.111] compiled for 1.16.4, module version = 2.9.2
[ 8.111] Module class: X.Org XInput Driver
[ 8.111] ABI class: X.Org XInput driver, version 21.0
[ 8.111] (II) Using input driver 'evdev' for 'Power Button'
[ 8.111] (**) Power Button: always reports core events
[ 8.111] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 8.111] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.111] (--) evdev: Power Button: Found keys
[ 8.111] (II) evdev: Power Button: Configuring as keyboard
[ 8.111] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 8.111] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 8.111] (**) Option "xkb_rules" "evdev"
[ 8.111] (**) Option "xkb_model" "pc105"
[ 8.111] (**) Option "xkb_layout" "us"
[ 8.111] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 8.111] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.111] (II) Using input driver 'evdev' for 'Power Button'
[ 8.111] (**) Power Button: always reports core events
[ 8.111] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 8.112] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.112] (--) evdev: Power Button: Found keys
[ 8.112] (II) evdev: Power Button: Configuring as keyboard
[ 8.112] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[ 8.112] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 8.112] (**) Option "xkb_rules" "evdev"
[ 8.112] (**) Option "xkb_model" "pc105"
[ 8.112] (**) Option "xkb_layout" "us"
[ 8.112] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3
(/dev/input/event10)
[ 8.112] (II) No input driver specified, ignoring this device.
[ 8.112] (II) This device may have been added with another device file.
[ 8.112] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7
(/dev/input/event11)
[ 8.112] (II) No input driver specified, ignoring this device.
[ 8.112] (II) This device may have been added with another device file.
[ 8.113] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8
(/dev/input/event12)
[ 8.113] (II) No input driver specified, ignoring this device.
[ 8.113] (II) This device may have been added with another device file.
[ 8.113] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9
(/dev/input/event13)
[ 8.113] (II) No input driver specified, ignoring this device.
[ 8.113] (II) This device may have been added with another device file.
[ 8.113] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10
(/dev/input/event14)
[ 8.113] (II) No input driver specified, ignoring this device.
[ 8.113] (II) This device may have been added with another device file.
[ 8.114] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11
(/dev/input/event15)
[ 8.114] (II) No input driver specified, ignoring this device.
[ 8.114] (II) This device may have been added with another device file.
[ 8.114] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10
(/dev/input/event8)
[ 8.114] (II) No input driver specified, ignoring this device.
[ 8.114] (II) This device may have been added with another device file.
[ 8.114] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11
(/dev/input/event9)
[ 8.114] (II) No input driver specified, ignoring this device.
[ 8.114] (II) This device may have been added with another device file.
[ 8.115] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3
(/dev/input/event4)
[ 8.115] (II) No input driver specified, ignoring this device.
[ 8.115] (II) This device may have been added with another device file.
[ 8.115] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7
(/dev/input/event5)
[ 8.115] (II) No input driver specified, ignoring this device.
[ 8.115] (II) This device may have been added with another device file.
[ 8.115] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8
(/dev/input/event6)
[ 8.115] (II) No input driver specified, ignoring this device.
[ 8.115] (II) This device may have been added with another device file.
[ 8.116] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9
(/dev/input/event7)
[ 8.116] (II) No input driver specified, ignoring this device.
[ 8.116] (II) This device may have been added with another device file.
[ 8.116] (II) config/udev: Adding input device Webcam C110
(/dev/input/event27)
[ 8.116] (**) Webcam C110: Applying InputClass "evdev keyboard catchall"
[ 8.116] (II) Using input driver 'evdev' for 'Webcam C110'
[ 8.116] (**) Webcam C110: always reports core events
[ 8.116] (**) evdev: Webcam C110: Device: "/dev/input/event27"
[ 8.116] (--) evdev: Webcam C110: Vendor 0x46d Product 0x829
[ 8.116] (--) evdev: Webcam C110: Found keys
[ 8.116] (II) evdev: Webcam C110: Configuring as keyboard
[ 8.116] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.2/usb7/7-1/7-1:1.0/input/input30/event27"
[ 8.116] (II) XINPUT: Adding extended input device "Webcam C110" (type:
KEYBOARD, id 8)
[ 8.116] (**) Option "xkb_rules" "evdev"
[ 8.116] (**) Option "xkb_model" "pc105"
[ 8.116] (**) Option "xkb_layout" "us"
[ 8.117] (II) config/udev: Adding input device HDA ATI SB Front Mic
(/dev/input/event16)
[ 8.117] (II) No input driver specified, ignoring this device.
[ 8.117] (II) This device may have been added with another device file.
[ 8.117] (II) config/udev: Adding input device HDA ATI SB Rear Mic
(/dev/input/event17)
[ 8.117] (II) No input driver specified, ignoring this device.
[ 8.117] (II) This device may have been added with another device file.
[ 8.117] (II) config/udev: Adding input device HDA ATI SB Line
(/dev/input/event18)
[ 8.117] (II) No input driver specified, ignoring this device.
[ 8.117] (II) This device may have been added with another device file.
[ 8.118] (II) config/udev: Adding input device HDA ATI SB Line Out Front
(/dev/input/event19)
[ 8.118] (II) No input driver specified, ignoring this device.
[ 8.118] (II) This device may have been added with another device file.
[ 8.118] (II) config/udev: Adding input device HDA ATI SB Line Out Surround
(/dev/input/event20)
[ 8.118] (II) No input driver specified, ignoring this device.
[ 8.118] (II) This device may have been added with another device file.
[ 8.118] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE
(/dev/input/event21)
[ 8.118] (II) No input driver specified, ignoring this device.
[ 8.118] (II) This device may have been added with another device file.
[ 8.119] (II) config/udev: Adding input device HDA ATI SB Line Out Side
(/dev/input/event22)
[ 8.119] (II) No input driver specified, ignoring this device.
[ 8.119] (II) This device may have been added with another device file.
[ 8.119] (II) config/udev: Adding input device HDA ATI SB Front Headphone
(/dev/input/event23)
[ 8.119] (II) No input driver specified, ignoring this device.
[ 8.119] (II) This device may have been added with another device file.
[ 8.120] (II) config/udev: Adding input device Logitech M705
(/dev/input/event1)
[ 8.120] (**) Logitech M705: Applying InputClass "evdev pointer catchall"
[ 8.120] (II) Using input driver 'evdev' for 'Logitech M705'
[ 8.120] (**) Logitech M705: always reports core events
[ 8.120] (**) evdev: Logitech M705: Device: "/dev/input/event1"
[ 8.120] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b
[ 8.120] (--) evdev: Logitech M705: Found 20 mouse buttons
[ 8.120] (--) evdev: Logitech M705: Found scroll wheel(s)
[ 8.120] (--) evdev: Logitech M705: Found relative axes
[ 8.120] (--) evdev: Logitech M705: Found x and y relative axes
[ 8.120] (II) evdev: Logitech M705: Configuring as mouse
[ 8.120] (II) evdev: Logitech M705: Adding scrollwheel support
[ 8.120] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5
[ 8.120] (**) evdev: Logitech M705: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.120] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3/event1"
[ 8.120] (II) XINPUT: Adding extended input device "Logitech M705" (type:
MOUSE, id 9)
[ 8.120] (II) evdev: Logitech M705: initialized for relative axes.
[ 8.120] (**) Logitech M705: (accel) keeping acceleration scheme 1
[ 8.120] (**) Logitech M705: (accel) acceleration profile 0
[ 8.120] (**) Logitech M705: (accel) acceleration factor: 2.000
[ 8.120] (**) Logitech M705: (accel) acceleration threshold: 4
[ 8.120] (II) config/udev: Adding input device Logitech M705
(/dev/input/mouse0)
[ 8.121] (II) No input driver specified, ignoring this device.
[ 8.121] (II) This device may have been added with another device file.
[ 8.121] (II) config/udev: Adding input device Logitech K360
(/dev/input/event0)
[ 8.121] (**) Logitech K360: Applying InputClass "evdev keyboard catchall"
[ 8.121] (II) Using input driver 'evdev' for 'Logitech K360'
[ 8.121] (**) Logitech K360: always reports core events
[ 8.121] (**) evdev: Logitech K360: Device: "/dev/input/event0"
[ 8.121] (--) evdev: Logitech K360: Vendor 0x46d Product 0x4004
[ 8.121] (--) evdev: Logitech K360: Found 1 mouse buttons
[ 8.121] (--) evdev: Logitech K360: Found scroll wheel(s)
[ 8.121] (--) evdev: Logitech K360: Found relative axes
[ 8.121] (II) evdev: Logitech K360: Forcing relative x/y axes to exist.
[ 8.121] (--) evdev: Logitech K360: Found absolute axes
[ 8.121] (II) evdev: Logitech K360: Forcing absolute x/y axes to exist.
[ 8.121] (--) evdev: Logitech K360: Found keys
[ 8.121] (II) evdev: Logitech K360: Configuring as mouse
[ 8.121] (II) evdev: Logitech K360: Configuring as keyboard
[ 8.121] (II) evdev: Logitech K360: Adding scrollwheel support
[ 8.121] (**) evdev: Logitech K360: YAxisMapping: buttons 4 and 5
[ 8.121] (**) evdev: Logitech K360: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.121] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2/event0"
[ 8.121] (II) XINPUT: Adding extended input device "Logitech K360" (type:
KEYBOARD, id 10)
[ 8.121] (**) Option "xkb_rules" "evdev"
[ 8.121] (**) Option "xkb_model" "pc105"
[ 8.121] (**) Option "xkb_layout" "us"
[ 8.122] (II) evdev: Logitech K360: initialized for relative axes.
[ 8.122] (WW) evdev: Logitech K360: ignoring absolute axes.
[ 8.122] (**) Logitech K360: (accel) keeping acceleration scheme 1
[ 8.122] (**) Logitech K360: (accel) acceleration profile 0
[ 8.122] (**) Logitech K360: (accel) acceleration factor: 2.000
[ 8.122] (**) Logitech K360: (accel) acceleration threshold: 4
[ 8.122] (II) config/udev: Adding input device Chinese-made Xbox Controller
(/dev/input/event25)
[ 8.122] (II) No input driver specified, ignoring this device.
[ 8.122] (II) This device may have been added with another device file.
[ 8.123] (II) config/udev: Adding input device Chinese-made Xbox Controller
(/dev/input/js0)
[ 8.123] (II) No input driver specified, ignoring this device.
[ 8.123] (II) This device may have been added with another device file.
[ 8.123] (II) config/udev: Adding input device Eee PC WMI hotkeys
(/dev/input/event26)
[ 8.123] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard
catchall"
[ 8.123] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 8.123] (**) Eee PC WMI hotkeys: always reports core events
[ 8.123] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event26"
[ 8.123] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 8.123] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 8.123] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 8.123] (**) Option "config_info"
"udev:/sys/devices/platform/eeepc-wmi/input/input29/event26"
[ 8.123] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys"
(type: KEYBOARD, id 11)
[ 8.123] (**) Option "xkb_rules" "evdev"
[ 8.123] (**) Option "xkb_model" "pc105"
[ 8.123] (**) Option "xkb_layout" "us"
[ 8.124] (II) config/udev: Adding input device PC Speaker
(/dev/input/event24)
[ 8.124] (II) No input driver specified, ignoring this device.
[ 8.124] (II) This device may have been added with another device file.
[ 8.129] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in
RANDR 1.2 capable environments
[ 8.149] (II) fglrx(1): Restoring Recent Mode via PCS is not supported in
RANDR 1.2 capable environments
[ 12.320] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 12.320] (II) fglrx(0): Backup framebuffer data.
[ 12.339] (II) fglrx(0): Backup complete.
[ 12.372] (II) fglrx(0): Init Suspend Console
[ 12.372] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 12.372] (II) fglrx(1): Backup framebuffer data.
[ 12.391] (II) fglrx(1): Backup complete.
[ 17.295] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 17.503] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 17.503] (II) fglrx(0): Using EDID range info for horizontal sync
[ 17.503] (II) fglrx(0): Using EDID range info for vertical refresh
[ 17.503] (II) fglrx(0): Printing DDC gathered Modelines:
[ 17.503] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579
1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 17.503] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536
1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 17.503] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17.503] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 17.503] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17.503] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 17.503] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 17.503] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.503] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17.503] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17.503] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 17.503] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17.503] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17.503] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17.503] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 17.503] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 17.503] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800
400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 17.532] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 29.052] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 29.052] (II) fglrx(0): Using hsync ranges from config file
[ 29.052] (II) fglrx(0): Using vrefresh ranges from config file
[ 29.052] (II) fglrx(0): Printing DDC gathered Modelines:
[ 29.052] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579
1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 29.052] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536
1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 29.052] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.052] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29.052] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29.052] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 29.052] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29.052] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.052] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29.052] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29.052] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29.052] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.052] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29.052] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29.052] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29.052] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 29.052] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800
400 401 404 417 -hsync +vsync (29.2 kHz e)
Bug script output from package glx-alternative-fglrx:
Diversions:
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by
glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by
glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by
glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0
by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so
by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by
glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2
by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
/usr/lib/mesa-diverted:
total 80
drwxr-xr-x 5 root root 4096 Aug 10 14:13 .
drwxr-xr-x 236 root root 61440 Aug 16 23:04 ..
drwxr-xr-x 2 root root 4096 Oct 21 2014 arm-linux-gnueabihf
drwxr-xr-x 2 root root 4096 Aug 10 14:11 i386-linux-gnu
lrwxrwxrwx 1 root root 33 Aug 10 14:13 libGL.so-master ->
/etc/alternatives/libGL.so-master
drwxr-xr-x 2 root root 4096 Aug 10 14:11 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 852
drwxr-xr-x 2 root root 4096 Aug 10 14:11 .
drwxr-xr-x 5 root root 4096 Aug 10 14:13 ..
lrwxrwxrwx 1 root root 15 Jul 28 05:05 libEGL.so.1 -> libEGL.so.1.0.0
-rw-r--r-- 1 root root 175332 Jul 28 05:05 libEGL.so.1.0.0
lrwxrwxrwx 1 root root 14 Jul 28 05:05 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 685756 Jul 28 05:05 libGL.so.1.2.0
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 824
drwxr-xr-x 2 root root 4096 Aug 10 14:11 .
drwxr-xr-x 5 root root 4096 Aug 10 14:13 ..
lrwxrwxrwx 1 root root 15 Jul 28 03:22 libEGL.so.1 -> libEGL.so.1.0.0
-rw-r--r-- 1 root root 160920 Jul 28 03:22 libEGL.so.1.0.0
lrwxrwxrwx 1 root root 10 Aug 10 14:11 libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 14 Jul 28 03:22 libGL.so.1 -> libGL.so.1.2.0
-rw-r--r-- 1 root root 619128 Jul 28 03:22 libGL.so.1.2.0
lrwxrwxrwx 1 root root 21 Jul 28 03:22 libGLESv1_CM.so.1 ->
libGLESv1_CM.so.1.1.0
-rw-r--r-- 1 root root 18232 Jul 28 03:22 libGLESv1_CM.so.1.1.0
lrwxrwxrwx 1 root root 18 Jul 28 03:22 libGLESv2.so.2 -> libGLESv2.so.2.0.0
-rw-r--r-- 1 root root 26424 Jul 28 03:22 libGLESv2.so.2.0.0
Alternative 'glx':
glx - auto mode
link currently points to /usr/lib/fglrx
/usr/lib/fglrx - priority 99
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-i386-linux-gnu:
/usr/lib/mesa-diverted/i386-linux-gnu/libEGL.so.1
slave glx--libEGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-i386-linux-gnu: /usr/lib/i386-linux-gnu/fglrx/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu:
/usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
slave glx--libGLESv1_CM.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1
slave glx--libGLESv2.so.2-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
slave glx--linux-libglx.so: /usr/lib/fglrx/fglrx-libglx.so
/usr/lib/fglrx/igpu - priority 90
slave glx--fglrx-blacklists-radeon.conf: /etc/ati/fglrx-blacklists-radeon.conf
slave glx--fglrx_drv.so: /usr/lib/fglrx/fglrx_drv.so
slave glx--libEGL.so.1-i386-linux-gnu:
/usr/lib/mesa-diverted/i386-linux-gnu/libEGL.so.1
slave glx--libEGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-i386-linux-gnu:
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
slave glx--libGLESv1_CM.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1
slave glx--libGLESv2.so.2-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
/usr/lib/mesa-diverted - priority 5
slave glx--libEGL.so.1-i386-linux-gnu:
/usr/lib/mesa-diverted/i386-linux-gnu/libEGL.so.1
slave glx--libEGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
slave glx--libGL.so.1-i386-linux-gnu:
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
slave glx--libGL.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
slave glx--libGLESv1_CM.so.1-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1
slave glx--libGLESv2.so.2-x86_64-linux-gnu:
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
Current 'best' version is '/usr/lib/fglrx'.
lrwxrwxrwx 1 root root 14 Aug 10 14:13 /etc/alternatives/glx -> /usr/lib/fglrx
lrwxrwxrwx 1 root root 37 Aug 10 14:13
/etc/alternatives/glx--fglrx-blacklists-radeon.conf ->
/etc/ati/fglrx-blacklists-radeon.conf
lrwxrwxrwx 1 root root 27 Aug 10 14:13 /etc/alternatives/glx--fglrx_drv.so ->
/usr/lib/fglrx/fglrx_drv.so
lrwxrwxrwx 1 root root 49 Aug 10 14:13
/etc/alternatives/glx--libEGL.so.1-i386-linux-gnu ->
/usr/lib/mesa-diverted/i386-linux-gnu/libEGL.so.1
lrwxrwxrwx 1 root root 51 Aug 10 14:13
/etc/alternatives/glx--libEGL.so.1-x86_64-linux-gnu ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libEGL.so.1
lrwxrwxrwx 1 root root 48 Aug 10 14:13
/etc/alternatives/glx--libGL.so-x86_64-linux-gnu ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so
lrwxrwxrwx 1 root root 40 Aug 10 14:13
/etc/alternatives/glx--libGL.so.1-i386-linux-gnu ->
/usr/lib/i386-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 42 Aug 10 14:13
/etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu ->
/usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1
lrwxrwxrwx 1 root root 57 Aug 10 14:13
/etc/alternatives/glx--libGLESv1_CM.so.1-x86_64-linux-gnu ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1
lrwxrwxrwx 1 root root 54 Aug 10 14:13
/etc/alternatives/glx--libGLESv2.so.2-x86_64-linux-gnu ->
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2
lrwxrwxrwx 1 root root 30 Aug 10 14:13 /etc/alternatives/glx--linux-libglx.so
-> /usr/lib/fglrx/fglrx-libglx.so
File System:
lrwxrwxrwx 1 root root 21 Aug 10 14:13 /usr/lib/glx -> /etc/alternatives/glx
lrwxrwxrwx 1 root root 48 Aug 10 14:13 /usr/lib/i386-linux-gnu/libGL.so.1
-> /etc/alternatives/glx--libGL.so.1-i386-linux-gnu
lrwxrwxrwx 1 root root 48 Aug 10 14:13 /usr/lib/x86_64-linux-gnu/libGL.so
-> /etc/alternatives/glx--libGL.so-x86_64-linux-gnu
lrwxrwxrwx 1 root root 50 Aug 10 14:13 /usr/lib/x86_64-linux-gnu/libGL.so.1
-> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 290160 Aug 11 03:53
/usr/lib/xorg/modules/extensions/libglx.so
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.0.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages fglrx-driver depends on:
ii debconf [debconf-2.0] 1.5.57
ii glx-alternative-fglrx 0.5.1
ii libc6 2.19-19
ii libfglrx 1:15.7-1
ii libgl1-mesa-glx [libgl1] 10.6.3-1
ii libstdc++6 5.1.1-14
ii libx11-6 2:1.6.3-1
ii libxext6 2:1.3.3-1
ii libxrandr2 2:1.5.0-1
ii libxrender1 1:0.9.8-1+b1
ii xserver-xorg-core [xorg-video-abi-19] 2:1.17.2-1.1
Versions of packages fglrx-driver recommends:
ii fglrx-atieventsd 1:15.7-1
ii fglrx-modules-dkms [fglrx-kernel-15.7] 1:15.7-1
ii libgl1-fglrx-glx 1:15.7-1
ii libgl1-fglrx-glx-i386 1:15.7-1
Versions of packages fglrx-driver suggests:
ii amd-opencl-icd 1:15.7-1
ii fglrx-control 1:15.7-1
ii libfglrx-amdxvba1 [xvba-va-driver] 1:15.7-1
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-19
ii libdrm-intel1 2.4.62-1
ii libdrm2 2.4.62-1
ii libpciaccess0 0.13.4-1
ii libpixman-1-0 0.32.6-3
ii libudev1 224-1
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-dri3-0 1.10-3+b1
ii libxcb-sync1 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.5.0-1
ii libxrender1 1:0.9.8-1+b1
ii libxshmfence1 1.2-1
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.9-1
ii xserver-xorg-core [xorg-video-abi-19] 2:1.17.2-1.1
Versions of packages fglrx-driver is related to:
pn ia32-libs <none>
ii libdrm-radeon1 2.4.62-1
pn linux-headers <none>
ii xserver-xorg 1:7.7+9
ii xserver-xorg-core 2:1.17.2-1.1
ii xserver-xorg-video-ati 1:7.5.0-1+b1
ii xserver-xorg-video-radeon 1:7.5.0-1+b1
-- debconf information:
* fglrx-driver/needs-xorg-conf-to-enable:
fglrx-driver/removed-but-enabled-in-xorg-conf:
fglrx-driver/check-xorg-conf-on-removal: true
--- End Message ---
