--- Begin Message ---
Package: pulseaudio
Version: 9.0-1.1
Severity: important
I use USB-attached speakers (Audioengine 2+) on my desktop machine.
They worked fine until I upgraded pulseaudio to version 9. I
reinstalled the version 8 pulseaudio packages and they work again.
Before realizing it was the pulseaudio package, I tried older (4.5) and
newer (4.7) Linux kernels, but the behavior was the same.
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = yes
; lfe-crossover-freq = 120
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug
/usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug
/usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=A2
Audioengine 2+, USB Audio
Default Audio Device
front:CARD=A2,DEV=0
Audioengine 2+, USB Audio
Front speakers
surround21:CARD=A2,DEV=0
Audioengine 2+, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=A2,DEV=0
Audioengine 2+, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=A2,DEV=0
Audioengine 2+, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=A2,DEV=0
Audioengine 2+, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=A2,DEV=0
Audioengine 2+, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=A2,DEV=0
Audioengine 2+, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=A2,DEV=0
Audioengine 2+, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=A2,DEV=0
Audioengine 2+, USB Audio
Direct sample mixing device
dsnoop:CARD=A2,DEV=0
Audioengine 2+, USB Audio
Direct sample snooping device
hw:CARD=A2,DEV=0
Audioengine 2+, USB Audio
Direct hardware device without any conversions
plughw:CARD=A2,DEV=0
Audioengine 2+, USB Audio
Hardware device with all software conversions
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "8.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "8.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "8.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "8.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "8.0"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="usb-Audioengine_Audioengine_2_-00"
card_name="alsa_card.usb-Audioengine_Audioengine_2_-00" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
Module #7
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "8.0"
Module #8
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "8.0"
Module #9
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "8.0"
Module #10
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "8.0"
Module #11
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "8.0"
Module #12
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "8.0"
Module #13
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "8.0"
Module #14
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "8.0"
Module #15
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "8.0"
Module #16
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "8.0"
Module #17
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "8.0"
Module #18
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "8.0"
Module #19
Name: module-native-protocol-tcp
Argument: auth-ip-acl=127.0.0.1
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (TCP sockets)"
module.version = "8.0"
Sink #0
State: SUSPENDED
Name: alsa_output.usb-Audioengine_Audioengine_2_-00.analog-stereo
Description: Audio Codec Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 26481 / 40% / -23.61 dB, front-right: 26481 /
40% / -23.61 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source:
alsa_output.usb-Audioengine_Audioengine_2_-00.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Audioengine 2+"
alsa.long_card_name = "Audioengine Audioengine 2+ at
usb-0000:00:1d.0-1.6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/sound/card0"
udev.id = "usb-Audioengine_Audioengine_2+-00"
device.bus = "usb"
device.vendor.id = "08bb"
device.vendor.name = "Texas Instruments"
device.product.id = "2704"
device.product.name = "Audio Codec"
device.serial = "Audioengine_Audioengine_2+"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Audio Codec Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB08bb:2704"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name:
alsa_output.usb-Audioengine_Audioengine_2_-00.analog-stereo.monitor
Description: Monitor of Audio Codec Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink:
alsa_output.usb-Audioengine_Audioengine_2_-00.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Audio Codec Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "Audioengine 2+"
alsa.long_card_name = "Audioengine Audioengine 2+ at
usb-0000:00:1d.0-1.6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/sound/card0"
udev.id = "usb-Audioengine_Audioengine_2+-00"
device.bus = "usb"
device.vendor.id = "08bb"
device.vendor.name = "Texas Instruments"
device.product.id = "2704"
device.product.name = "Audio Codec"
device.serial = "Audioengine_Audioengine_2+"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 14
Properties:
application.name = "Login Session 1"
systemd-login.session = "1"
Client #1
Driver: protocol-native.c
Owner Module: 7
Properties:
application.name = "xfce4-pulseaudio-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "1073741855"
application.version = "0.2.4"
application.id = "org.xfce.pulseaudio-plugin"
application.icon_name = "multimedia-volume-control"
application.process.id = "3216"
application.process.user = "ecc"
application.process.host = "stratocaster"
application.process.binary = "wrapper-2.0"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"aefa90b9a472b262657840d80000196d"
application.process.session_id = "1"
Client #2
Driver: protocol-native.c
Owner Module: 7
Properties:
application.name = "powermate"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "1073741855"
application.process.id = "3225"
application.process.user = "ecc"
application.process.host = "stratocaster"
application.process.binary = "powermate"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id =
"aefa90b9a472b262657840d80000196d"
application.process.session_id = "1"
Client #10
Driver: protocol-native.c
Owner Module: 7
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "5296"
application.process.user = "ecc"
application.process.host = "stratocaster"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id =
"aefa90b9a472b262657840d80000196d"
application.process.session_id = "1"
Card #0
Name: alsa_card.usb-Audioengine_Audioengine_2_-00
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "Audioengine 2+"
alsa.long_card_name = "Audioengine Audioengine 2+ at
usb-0000:00:1d.0-1.6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/sound/card0"
udev.id = "usb-Audioengine_Audioengine_2+-00"
device.bus = "usb"
device.vendor.id = "08bb"
device.vendor.name = "Texas Instruments"
device.product.id = "2704"
device.product.name = "Audio Codec"
device.serial = "Audioengine_Audioengine_2+"
device.string = "0"
device.description = "Audio Codec"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0,
priority: 200, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6000, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1,
sources: 0, priority: 5500, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-output: Analog Output (priority: 9900, latency offset: 0
usec)
Part of profile(s): output:analog-mono,
output:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo
Server String: /run/user/1000/pulse/native
Library Protocol Version: 30
Server Protocol Version: 30
Is Local: yes
Client Index: 11
Tile Size: 65472
User Name: ecc
Host Name: stratocaster
Server Name: pulseaudio
Server Version: 8.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.usb-Audioengine_Audioengine_2_-00.analog-stereo
Default Source:
alsa_output.usb-Audioengine_Audioengine_2_-00.analog-stereo.monitor
Cookie: 38a5:49cd
--- End Message ---
