Your message dated Wed, 21 Sep 2016 19:18:36 +0000
with message-id <>
and subject line Bug#823952: fixed in dahdi-linux 1:2.11.1~dfsg-1
has caused the Debian Bug report #823952,
regarding dahdi-source: AXE400PL + linux 3.16.0-4-686-pae + dahdi 1:2.10.2-2
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact

Debian Bug Tracking System
Contact with problems
--- Begin Message ---
Package: dahdi-source
Version: 1:2.10.2~dfsg-1
Severity: important

Dear Maintainer,

This bug is near the same as #780997 but is not solved.

I'm using Debian jessie, I installed dahdi-source from jessie repos but I got 
an error when loading dahdi module, I try also upgrading to the unstable 
version, but I got the same error. So, I get this error with dahdi-source 
Version: and Version: 2.10.2

When system loads dahdi module yo can see the message "Warning: Span WCTDM/4 
didn't specify a spantype. Please fix driver!"

dahdi: Version: 2.10.2
dahdi: Telephony Interface Registered on major 196
dahdi: Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!
No freshmaker chip
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)


lshw -vv

02:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
        Subsystem: ATCOM Technology co., LTD. Device 0001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (250ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at e000 [size=256]
        Region 1: Memory at 91300000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA 
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: wctdm


mod|grep dahdi
dahdi                 206790  1 wctdm
crc_ccitt              12331  1 dahdi


dahdi_cfg -vv
DAHDI Tools Version - 2.10.2
Timeout waiting for all spans to be assigned.

DAHDI Version: 2.10.2
Echo Canceller(s): 

Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 04)

4 channels to configure.

DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22)
Selected signaling not supported

** And syslog says

dahdi_ioctl_chanconfig: No channel for number 1


If you need me to make any tests or provide you further information please 
contact me.


-- System Information:
Debian Release: 8.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.16.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages dahdi-source depends on:
ii  bzip2             1.0.6-7+b3
ii  debhelper         9.20150101
ii  module-assistant  0.11.7

Versions of packages dahdi-source recommends:
ii  dahdi-linux  1:2.10.2~dfsg-1

dahdi-source suggests no packages.

-- no debconf information

--- End Message ---
--- Begin Message ---
Source: dahdi-linux
Source-Version: 1:2.11.1~dfsg-1

We believe that the bug you reported is fixed in the latest version of
dahdi-linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
Tzafrir Cohen <> (supplier of updated dahdi-linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing

Hash: SHA256

Format: 1.8
Date: Wed, 21 Sep 2016 21:55:56 +0300
Source: dahdi-linux
Binary: dahdi-linux dahdi-source
Architecture: source
Version: 1:2.11.1~dfsg-1
Distribution: unstable
Urgency: medium
Maintainer: Debian VoIP Team <>
Changed-By: Tzafrir Cohen <>
 dahdi-linux - DAHDI telephony interface - Linux userspace parts
 dahdi-source - DAHDI telephony interface - source code for kernel driver
Closes: 776622 795458 823302 823952
 dahdi-linux (1:2.11.1~dfsg-1) unstable; urgency=medium
   [ Tzafrir Cohen ]
   * New upstream version
   * Load the module dahdi at boot (Closes: #823302)
   * README.Debian: purge old and update (Closes: #795458)
   * Set spantype for wctdm and wcfxo (Closes: #823952)
   * Use secure VCS URLs
   * Ignore debian/debhelper-build-stamp
   * Standards version 3.9.8 (no change needed)
   [ Chris Lamb ]
   * Reproducible build: sources tarball at build date (Closes: #776622)
 c0928ffa675987708a22095c9152f8bb29df57e0 1956 dahdi-linux_2.11.1~dfsg-1.dsc
 a68b777c4d24211c9598398c88da1cdb05bec675 1130188 
 791df244871aec4afd7f95bb0a51520a0912e84b 59064 
 981ca9e4fd47369e423b4ef91a22daedf6f1bfff4acf9e188de5883b2ea40c0d 1956 
 2d5ca12ebd83a40857dba845a1b24b2365324505ab6f7eedf7aeba19400392bc 1130188 
 3f7f587ae53b38b2c0f59ad1c442c77876a2a8f43ffecc1eb99d643a3d1ed928 59064 
 47ccd2abc877f068dd36d4566a2394e3 1956 comm optional 
 efe1ff5ba587ab574235d4da06c46e36 1130188 comm optional 
 985033b07cf34eace0b582800c8c05b5 59064 comm optional 

Version: GnuPG v1


--- End Message ---

Reply via email to