--- Begin Message ---
Package: hostapd
Version: 2:2.6-15
Severity: important
I'm trying to get my iwlwifi chip to work with 5GHz and ACS
lspci:
03:00.0 Network controller: Intel Corporation Device 24fb (rev 10)
Subsystem: Intel Corporation Device 2110
Flags: bus master, fast devsel, latency 0, IRQ 136
Memory at df100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 1c-4d-70-ff-ff-62-8f-2c
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [154] L1 PM Substates
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
iw reg get:
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, NO-IR
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, NO-IR
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, NO-IR
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
phy#0 (self-managed)
country US: DFS-UNSET
(2402 - 2437 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-80MHZ,
NO-160MHZ
(2422 - 2462 @ 40), (6, 22), (N/A), AUTO-BW, NO-80MHZ, NO-160MHZ
(2447 - 2482 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-80MHZ,
NO-160MHZ
(5170 - 5190 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
(5190 - 5210 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
(5210 - 5230 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
(5230 - 5250 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
(5250 - 5270 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5270 - 5290 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5290 - 5310 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5310 - 5330 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5490 - 5510 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5510 - 5530 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5530 - 5550 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5550 - 5570 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5570 - 5590 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5590 - 5610 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5610 - 5630 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5630 - 5650 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5650 - 5670 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5670 - 5690 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5690 - 5710 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5710 - 5730 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5735 - 5755 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
(5755 - 5775 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
(5775 - 5795 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
(5795 - 5815 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
(5815 - 5835 @ 20), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-HT40PLUS,
NO-80MHZ, NO-160MHZ
iw list:
Wiphy phy0
max # scan SSIDs: 20
max scan IEs length: 425 bytes
max # sched scan SSIDs: 20
max # match sets: 11
max # scan plans: 2
max scan plan interval: 65535
max scan plan iterations: 254
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Device supports AP-side u-APSD.
Device supports T-DLS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CMAC (00-0f-ac:6)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* P2P-client
* P2P-GO
* P2P-device
Band 1:
Capabilities: 0x116e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT Max RX data rate: 150 Mbps
HT TX/RX MCS rate indexes supported: 0-7
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (22.0 dBm)
* 2417 MHz [2] (22.0 dBm)
* 2422 MHz [3] (22.0 dBm)
* 2427 MHz [4] (22.0 dBm)
* 2432 MHz [5] (22.0 dBm)
* 2437 MHz [6] (22.0 dBm)
* 2442 MHz [7] (22.0 dBm)
* 2447 MHz [8] (22.0 dBm)
* 2452 MHz [9] (22.0 dBm)
* 2457 MHz [10] (22.0 dBm)
* 2462 MHz [11] (22.0 dBm)
* 2467 MHz [12] (22.0 dBm)
* 2472 MHz [13] (22.0 dBm)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x116e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT Max RX data rate: 150 Mbps
HT TX/RX MCS rate indexes supported: 0-7
VHT Capabilities (0x33807120):
Max MPDU length: 3895
Supported Channel Width: neither 160 nor 80+80
short GI (80 MHz)
SU Beamformee
RX antenna pattern consistency
TX antenna pattern consistency
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: not supported
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: not supported
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (22.0 dBm)
* 5200 MHz [40] (22.0 dBm)
* 5220 MHz [44] (22.0 dBm)
* 5240 MHz [48] (22.0 dBm)
* 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
* 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
* 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
* 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
* 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
* 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
* 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
* 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
* 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
* 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
* 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
* 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
* 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
* 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
* 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
* 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
* 5745 MHz [149] (22.0 dBm)
* 5765 MHz [153] (22.0 dBm)
* 5785 MHz [157] (22.0 dBm)
* 5805 MHz [161] (22.0 dBm)
* 5825 MHz [165] (22.0 dBm)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* tdls_mgmt
* tdls_oper
* start_sched_scan
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* channel_switch
* set_qos_map
* add_tx_ts
* Unknown command (121)
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0
0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0
0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
WoWLAN support:
* wake up on disconnect
* wake up on magic packet
* wake up on pattern match, up to 20 patterns of 16-128 bytes,
maximum packet offset 0 bytes
* can do GTK rekeying
* wake up on GTK rekey failure
* wake up on EAP identity request
* wake up on 4-way handshake
* wake up on rfkill release
* wake up on network detection, up to 11 match sets
* wake up on TCP connection
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{
P2P-device } <= 1,
total <= 3, #channels <= 2
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports per-vif TX power setting
P2P GO supports CT window setting
P2P GO supports opportunistic powersave setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
Device supports static SMPS
Device supports dynamic SMPS
Device supports WMM-AC admission (TSPECs)
Device supports configuring vdev MAC-addr on create.
Device supports TDLS channel switching
config:
interface=wlan0
bridge=eth1
country_code=US
ieee80211d=1
ssid=blah
hw_mode=a
ieee80211n=1
wmm_enabled=1
ieee80211h=1
ieee80211ac=1
channel=0
wpa=2
wpa_passphrase=blah
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
macaddr_acl=0
log:
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd/hostapd.conf
ctrl_interface_group=4 (from group name 'adm')
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: TDLS channel switch
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 04
00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) -
hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 5 iftype 3 (AP)
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x56471053a120
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x56471053a120
match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ)
nl_handle=0x56471053a120 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ)
nl_handle=0x56471053a120 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC)
nl_handle=0x56471053a120 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH)
nl_handle=0x56471053a120 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ)
nl_handle=0x56471053a120 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=0501
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=0504
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=08
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x56471053a120 match=7f
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
nl80211: Add own interface ifindex 4 (ifidx_reason 5)
nl80211: if_indices[16]: 4(5)
nl80211: Add own interface ifindex 5 (ifidx_reason -1)
nl80211: if_indices[16]: 4(5) 5(-1)
nl80211: Adding interface wlan0 into bridge eth1
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 00, new country code US
Continue interface setup after channel list update
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=5 ifname=wlan0 operstate=2 linkmode=0 ifi_family=0
ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=5 ifname=wlan0 operstate=2 linkmode=0 master=4
ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=5 ifname=wlan0 operstate=2 linkmode=0 master=4
ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=5 ifname=wlan0 master=4 operstate=2 ifi_family=7
ifi_flags=0x1003 ([UP])
nl80211: Add ifindex 4 for bridge eth1
nl80211: Add own interface ifindex 4 (ifidx_reason 5)
nl80211: ifindex 4 already in the list
RTM_NEWLINK: ifi_index=4 ifname=eth1 operstate=6 linkmode=0 ifi_family=0
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
wlan0: Event INTERFACE_STATUS (5) received
Unknown event 5
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=120 freq=5600 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=124 freq=5620 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=128 freq=5640 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=144 freq=5720 MHz max_tx_power=20 dBm (DFS state =
usable)
Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
ACS: Automatic channel selection started, this may take a bit
ACS: Scanning 1 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
nl80211: Scan frequency 5180 MHz
nl80211: Scan frequency 5200 MHz
nl80211: Scan frequency 5220 MHz
nl80211: Scan frequency 5240 MHz
nl80211: Scan frequency 5260 MHz
nl80211: Scan frequency 5280 MHz
nl80211: Scan frequency 5300 MHz
nl80211: Scan frequency 5320 MHz
nl80211: Scan frequency 5500 MHz
nl80211: Scan frequency 5520 MHz
nl80211: Scan frequency 5540 MHz
nl80211: Scan frequency 5560 MHz
nl80211: Scan frequency 5580 MHz
nl80211: Scan frequency 5600 MHz
nl80211: Scan frequency 5620 MHz
nl80211: Scan frequency 5640 MHz
nl80211: Scan frequency 5660 MHz
nl80211: Scan frequency 5680 MHz
nl80211: Scan frequency 5700 MHz
nl80211: Scan frequency 5720 MHz
nl80211: Scan frequency 5745 MHz
nl80211: Scan frequency 5765 MHz
nl80211: Scan frequency 5785 MHz
nl80211: Scan frequency 5805 MHz
nl80211: Scan frequency 5825 MHz
Scan requested (ret=0) - scan timeout 10 seconds
wlan0: interface state COUNTRY_UPDATE->ACS
wlan0: ACS-STARTED
Interface initialization will be completed in a callback (ACS)
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (48) received
Unknown event 48
RTM_NEWLINK: ifi_index=5 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805
5825
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (47) received
No survey data received
ACS: Scanning 2 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
nl80211: Scan frequency 5180 MHz
nl80211: Scan frequency 5200 MHz
nl80211: Scan frequency 5220 MHz
nl80211: Scan frequency 5240 MHz
nl80211: Scan frequency 5260 MHz
nl80211: Scan frequency 5280 MHz
nl80211: Scan frequency 5300 MHz
nl80211: Scan frequency 5320 MHz
nl80211: Scan frequency 5500 MHz
nl80211: Scan frequency 5520 MHz
nl80211: Scan frequency 5540 MHz
nl80211: Scan frequency 5560 MHz
nl80211: Scan frequency 5580 MHz
nl80211: Scan frequency 5600 MHz
nl80211: Scan frequency 5620 MHz
nl80211: Scan frequency 5640 MHz
nl80211: Scan frequency 5660 MHz
nl80211: Scan frequency 5680 MHz
nl80211: Scan frequency 5700 MHz
nl80211: Scan frequency 5720 MHz
nl80211: Scan frequency 5745 MHz
nl80211: Scan frequency 5765 MHz
nl80211: Scan frequency 5785 MHz
nl80211: Scan frequency 5805 MHz
nl80211: Scan frequency 5825 MHz
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (48) received
Unknown event 48
RTM_NEWLINK: ifi_index=5 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805
5825
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (47) received
No survey data received
ACS: Scanning 3 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
nl80211: Scan frequency 5180 MHz
nl80211: Scan frequency 5200 MHz
nl80211: Scan frequency 5220 MHz
nl80211: Scan frequency 5240 MHz
nl80211: Scan frequency 5260 MHz
nl80211: Scan frequency 5280 MHz
nl80211: Scan frequency 5300 MHz
nl80211: Scan frequency 5320 MHz
nl80211: Scan frequency 5500 MHz
nl80211: Scan frequency 5520 MHz
nl80211: Scan frequency 5540 MHz
nl80211: Scan frequency 5560 MHz
nl80211: Scan frequency 5580 MHz
nl80211: Scan frequency 5600 MHz
nl80211: Scan frequency 5620 MHz
nl80211: Scan frequency 5640 MHz
nl80211: Scan frequency 5660 MHz
nl80211: Scan frequency 5680 MHz
nl80211: Scan frequency 5700 MHz
nl80211: Scan frequency 5720 MHz
nl80211: Scan frequency 5745 MHz
nl80211: Scan frequency 5765 MHz
nl80211: Scan frequency 5785 MHz
nl80211: Scan frequency 5805 MHz
nl80211: Scan frequency 5825 MHz
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (48) received
Unknown event 48
RTM_NEWLINK: ifi_index=5 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805
5825
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (47) received
No survey data received
ACS: Scanning 4 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
nl80211: Scan frequency 5180 MHz
nl80211: Scan frequency 5200 MHz
nl80211: Scan frequency 5220 MHz
nl80211: Scan frequency 5240 MHz
nl80211: Scan frequency 5260 MHz
nl80211: Scan frequency 5280 MHz
nl80211: Scan frequency 5300 MHz
nl80211: Scan frequency 5320 MHz
nl80211: Scan frequency 5500 MHz
nl80211: Scan frequency 5520 MHz
nl80211: Scan frequency 5540 MHz
nl80211: Scan frequency 5560 MHz
nl80211: Scan frequency 5580 MHz
nl80211: Scan frequency 5600 MHz
nl80211: Scan frequency 5620 MHz
nl80211: Scan frequency 5640 MHz
nl80211: Scan frequency 5660 MHz
nl80211: Scan frequency 5680 MHz
nl80211: Scan frequency 5700 MHz
nl80211: Scan frequency 5720 MHz
nl80211: Scan frequency 5745 MHz
nl80211: Scan frequency 5765 MHz
nl80211: Scan frequency 5785 MHz
nl80211: Scan frequency 5805 MHz
nl80211: Scan frequency 5825 MHz
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (48) received
Unknown event 48
RTM_NEWLINK: ifi_index=5 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805
5825
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (47) received
No survey data received
ACS: Scanning 5 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
nl80211: Scan frequency 5180 MHz
nl80211: Scan frequency 5200 MHz
nl80211: Scan frequency 5220 MHz
nl80211: Scan frequency 5240 MHz
nl80211: Scan frequency 5260 MHz
nl80211: Scan frequency 5280 MHz
nl80211: Scan frequency 5300 MHz
nl80211: Scan frequency 5320 MHz
nl80211: Scan frequency 5500 MHz
nl80211: Scan frequency 5520 MHz
nl80211: Scan frequency 5540 MHz
nl80211: Scan frequency 5560 MHz
nl80211: Scan frequency 5580 MHz
nl80211: Scan frequency 5600 MHz
nl80211: Scan frequency 5620 MHz
nl80211: Scan frequency 5640 MHz
nl80211: Scan frequency 5660 MHz
nl80211: Scan frequency 5680 MHz
nl80211: Scan frequency 5700 MHz
nl80211: Scan frequency 5720 MHz
nl80211: Scan frequency 5745 MHz
nl80211: Scan frequency 5765 MHz
nl80211: Scan frequency 5785 MHz
nl80211: Scan frequency 5805 MHz
nl80211: Scan frequency 5825 MHz
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (48) received
Unknown event 48
RTM_NEWLINK: ifi_index=5 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805
5825
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (47) received
No survey data received
ACS: Trying survey-based ACS
ACS: Unable to collect survey data
ACS: All study options have failed
Interface initialization failed
wlan0: interface state ACS->DISABLED
wlan0: AP-DISABLED
ACS: Possibly channel configuration is invalid, please report this along with
your config file.
ACS: Failed to start
wlan0: AP-DISABLED
wlan0: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0
wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=0
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=0 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 1c 4d 70 62 8f 2c 1c
4d 70 62 8f 2c 00 00 03 00
nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=0 wait=0)
hostapd_free_hapd_data: Interface wlan0 wasn't started
hostapd_deinit_driver: driver=0x56470fcf1bc0 drv_priv=0x56471053d380 ->
hapd_deinit
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=5)
netlink: Operstate: ifindex=5 linkmode=0 (kernel-control), operstate=6
(IF_OPER_UP)
nl80211: Set mode ifindex 5 iftype 2 (STATION)
nl80211: Teardown AP(wlan0) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x8888decf98db29a9 (AP teardown)
hostapd_deinit_driver:bss[0]->drv_priv=0x56471053d380
hostapd_cleanup_iface_partial(0x56471053b6f0)
Interface wlan0 disabled
wlan0: interface state DISABLED->DISABLED
hostapd_interface_deinit_free(0x56471053b6f0)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x56471053b6f0)
wlan0: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0
wlan0: AP-DISABLED
hostapd_cleanup(hapd=0x56471053c6f0 (wlan0))
hostapd_free_hapd_data: Interface wlan0 wasn't started
hostapd_interface_deinit_free: driver=0x56470fcf1bc0 drv_priv=(nil) ->
hapd_deinit
hostapd_interface_free(0x56471053b6f0)
hostapd_interface_free: free hapd 0x56471053c6f0
hostapd_cleanup_iface(0x56471053b6f0)
hostapd_cleanup_iface_partial(0x56471053b6f0)
hostapd_cleanup_iface: free iface=0x56471053b6f0
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'testing-debug'), (500,
'unstable'), (1, 'experimental-debug')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.14.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages hostapd depends on:
ii libc6 2.25-5
ii libnl-3-200 3.2.27-2
ii libnl-genl-3-200 3.2.27-2
ii libnl-route-3-200 3.2.27-2
ii libssl1.1 1.1.0g-2
ii lsb-base 9.20170808
hostapd recommends no packages.
hostapd suggests no packages.
-- Configuration Files:
/etc/default/hostapd changed:
DAEMON_CONF="/etc/hostapd/hostapd.conf"
DAEMON_OPTS="-dd -K"
-- no debconf information
--- End Message ---
