--- Begin Message ---
Package: pulseaudio
Version: 12.2-2
Severity: grave
Justification: renders package unusable
Dear Maintainer,
* What led up to the situation?
update/dist-upgrade of debian unstable on 2018-11-06. The problem first showed
itself when I
started my machine the next day.
* What exactly did you do (or not do) that was effective (or ineffective)?
I first noticed that I had no sound (in firefox). Further investigation showed
that pulseaudio wasn't running.
So I attempted to run it from the command line.
* What was the outcome of this action?
A segmentation violation (SIGSEGV)
* What outcome did you expect instead?
pulsaudio should continue running and allow connections from other programs
Further information:
* "strace pulseaudio" didn't provide any useful information.
* "pulseaudio -vvv" showed the last message before the crash was a failure to
set 48000 sample rate in pcm_a52.c
Workaround:
* Edit /usr/share/alsa/alsa.conf.d/60-a52-encoder.conf and replace the default
48000 with 44100
pulseaudio now starts and appears to work correctly with my normal audio
devices (:USB headset and
built-in analogue)
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.18.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8), LANGUAGE=en_GB:en
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.118
ii libasound2 1.1.7-1
ii libasound2-plugins 1.1.7-2
ii libc6 2.27-8
ii libcap2 1:2.25-1.2
ii libdbus-1-3 1.12.10-1
ii libgcc1 1:8.2.0-9
ii libice6 2:1.0.9-2
ii libltdl7 2.4.6-6
ii liborc-0.4-0 1:0.4.28-3
ii libpulse0 12.2-2
ii libsm6 2:1.2.2-1+b3
ii libsndfile1 1.0.28-4
ii libsoxr0 0.1.2-3
ii libspeexdsp1 1.2~rc1.2-1+b2
ii libstdc++6 8.2.0-9
ii libsystemd0 239-11
ii libtdb1 1.3.16-2
ii libudev1 239-11
ii libwebrtc-audio-processing1 0.3-1
ii libx11-6 2:1.6.7-1
ii libx11-xcb1 2:1.6.7-1
ii libxcb1 1.13.1-1
ii libxtst6 2:1.2.3-1
ii lsb-base 9.20170808
ii pulseaudio-utils 12.2-2
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.12.10-1
ii libpam-systemd 239-11
ii rtkit 0.11-6
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 3.0-4
pn pavumeter <none>
ii udev 239-11
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the
paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
null
Discard all samples (playback) or generate zero samples (capture)
jack
JACK Audio Connection Kit
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 3
HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
HDA Intel HDMI, HDMI 4
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample mixing device
dmix:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample mixing device
dmix:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample mixing device
dmix:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Direct sample mixing device
dmix:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Hardware device with all software conversions
usbstream:CARD=HDMI
HDA Intel HDMI
USB Stream Output
default:CARD=PCH
HDA Intel PCH, ALC3232 Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC3232 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3232 Analog
Hardware device with all software conversions
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
default:CARD=H340
Logitech USB Headset H340, USB Audio
Default Audio Device
sysdefault:CARD=H340
Logitech USB Headset H340, USB Audio
Default Audio Device
front:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
Front speakers
surround21:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
Direct sample mixing device
dsnoop:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
Direct sample snooping device
hw:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
Direct hardware device without any conversions
plughw:CARD=H340,DEV=0
Logitech USB Headset H340, USB Audio
Hardware device with all software conversions
usbstream:CARD=H340
Logitech USB Headset H340
USB Stream Output
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "12.2"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "12.2"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "12.2"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "12.2"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices
are plugged/unplugged"
module.version = "12.2"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "12.2"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_03.0"
card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Module #7
Name: module-alsa-card
Argument: device_id="2"
name="usb-Logitech_Inc._Logitech_USB_Headset_H340-00"
card_name="alsa_card.usb-Logitech_Inc._Logitech_USB_Headset_H340-00"
namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 3
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Module #8
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 3
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Module #9
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth
devices out-of-the-box easier"
module.version = "12.2"
Module #10
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and
load the corresponding discovery module"
module.version = "12.2"
Module #11
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio
devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "12.2"
Module #12
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "12.2"
Module #13
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "12.2"
Module #14
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "12.2"
Module #15
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "12.2"
Module #16
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "12.2"
Module #17
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "12.2"
Module #18
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "12.2"
Module #19
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "12.2"
Module #20
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "12.2"
Module #21
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "12.2"
Module #22
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "12.2"
Module #23
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "12.2"
Sink #0
State: IDLE
Name:
alsa_output.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo
Description: Headset H340 Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 58409 / 89% / -3.00 dB
Monitor Source:
alsa_output.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo.monitor
Latency: 42136 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Logitech USB Headset H340"
alsa.long_card_name = "Logitech Inc. Logitech USB Headset H340
at usb-0000:00:14.0-6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2"
udev.id = "usb-Logitech_Inc._Logitech_USB_Headset_H340-00"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a38"
device.product.name = "Headset H340"
device.serial = "Logitech_Inc._Logitech_USB_Headset_H340"
device.form_factor = "headset"
device.string = "front:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Headset H340 Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0a38"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Sink #1
State: IDLE
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 32191 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3232 Analog"
alsa.id = "ALC3232 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb2a34000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High
Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC3232"
alsa.components = "HDA:10ec0292,17aa2211,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (priority: 10000, not available)
analog-output-headphones: Headphones (priority: 9000, available)
Active Port: analog-output-headphones
Formats:
pcm
Source #0
State: RUNNING
Name:
alsa_output.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo.monitor
Description: Monitor of Headset H340 Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink:
alsa_output.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Headset H340 Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "Logitech USB Headset H340"
alsa.long_card_name = "Logitech Inc. Logitech USB Headset H340
at usb-0000:00:14.0-6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2"
udev.id = "usb-Logitech_Inc._Logitech_USB_Headset_H340-00"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a38"
device.product.name = "Headset H340"
device.serial = "Logitech_Inc._Logitech_USB_Headset_H340"
device.form_factor = "headset"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Formats:
pcm
Source #1
State: RUNNING
Name:
alsa_input.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo
Description: Headset H340 Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 48211 / 74% / -8.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Logitech USB Headset H340"
alsa.long_card_name = "Logitech Inc. Logitech USB Headset H340
at usb-0000:00:14.0-6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2"
udev.id = "usb-Logitech_Inc._Logitech_USB_Headset_H340-00"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a38"
device.product.name = "Headset H340"
device.serial = "Logitech_Inc._Logitech_USB_Headset_H340"
device.form_factor = "headset"
device.string = "front:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Headset H340 Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0a38"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Source #2
State: RUNNING
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb2a34000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High
Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #3
State: RUNNING
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: yes
Volume: front-left: 65535 / 100% / -0.00 dB, front-right: 65535 /
100% / -0.00 dB
balance 0.00
Base Volume: 13076 / 20% / -42.00 dB
Monitor of Sink: n/a
Latency: 3055 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3232 Analog"
alsa.id = "ALC3232 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb2a34000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High
Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC3232"
alsa.components = "HDA:10ec0292,17aa2211,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900)
analog-input-dock-mic: Dock Microphone (priority: 7800, not
available)
analog-input-mic: Microphone (priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
Source Output #13
Driver: protocol-native.c
Owner Module: 12
Client: 5
Source: 0
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 15147 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "15435"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "pavucontrol"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #14
Driver: protocol-native.c
Owner Module: 12
Client: 5
Source: 1
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 202 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "15435"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "pavucontrol"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #15
Driver: protocol-native.c
Owner Module: 12
Client: 5
Source: 2
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 19909 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "15435"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "pavucontrol"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #16
Driver: protocol-native.c
Owner Module: 12
Client: 5
Source: 3
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65535 / 100% / -0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 3254 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "15435"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "pavucontrol"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Client #0
Driver: module-systemd-login.c
Owner Module: 19
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #2
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "AudioIPC Server"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "14813"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "firefox"
application.language = "en_GB.utf8"
window.x11.display = ":0.0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
application.icon_name = "firefox"
Client #4
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "Linphone"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
media.role = "phone"
application.process.id = "15380"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "linphone"
application.icon_name = "linphone"
window.x11.display = ":0"
application.language = "en_GB.utf8"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
Client #5
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "15435"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "pavucontrol"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
Client #6
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "16441"
application.process.user = "dh"
application.process.host = "er02629n"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id =
"6fc7424dc9e5470b85628694781e5c97"
application.process.session_id = "2"
Card #0
Name: alsa_card.pci-0000_00_03.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb2a30000 irq 32"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor
HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1,
sources: 0, priority: 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output
(sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output
(sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output
(sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output
(sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5)
Output (sinks: 1, sources: 0, priority: 600, available: no)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo,
output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1,
output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2,
output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra3,
output:hdmi-surround-extra3, output:hdmi-surround71-extra3
hdmi-output-4: HDMI / DisplayPort 5 (priority: 5500, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra4,
output:hdmi-surround-extra4, output:hdmi-surround71-extra4
Card #1
Name: alsa_card.usb-Logitech_Inc._Logitech_USB_Headset_H340-00
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "2"
alsa.card_name = "Logitech USB Headset H340"
alsa.long_card_name = "Logitech Inc. Logitech USB Headset H340
at usb-0000:00:14.0-6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2"
udev.id = "usb-Logitech_Inc._Logitech_USB_Headset_H340-00"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a38"
device.product.name = "Headset H340"
device.serial = "Logitech_Inc._Logitech_USB_Headset_H340"
device.form_factor = "headset"
device.string = "2"
device.description = "Headset H340"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0,
sources: 1, priority: 55, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output
+ Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6555,
available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1,
sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo
(IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565,
available: yes)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex
(IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
output:iec958-ac3-surround-51: Digital Surround 5.1
(IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digital
Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1,
priority: 365, available: yes)
output:iec958-ac3-surround-51+input:iec958-stereo: Digital
Surround 5.1 (IEC958/AC3) Output + Digital Stereo (IEC958) Input (sinks: 1,
sources: 1, priority: 355, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0
usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): input:iec958-stereo,
output:analog-stereo+input:iec958-stereo,
output:iec958-stereo+input:iec958-stereo,
output:iec958-ac3-surround-51+input:iec958-stereo
analog-output: Analog Output (priority: 9900, latency offset: 0
usec)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-stereo+input:iec958-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-stereo+input:iec958-stereo
Card #2
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb2a34000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High
Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 65, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks:
1, sources: 0, priority: 1200, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround
4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265,
available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900,
latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo
analog-input-dock-mic: Dock Microphone (priority: 7800, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo
analog-input-mic: Microphone (priority: 8700, latency offset: 0
usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency
offset: 0 usec, available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
Server String: /run/user/1000/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 7
Tile Size: 65472
User Name: dh
Host Name: er02629n
Server Name: pulseaudio
Server Version: 12.2
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink:
alsa_output.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo
Default Source:
alsa_input.usb-Logitech_Inc._Logitech_USB_Headset_H340-00.analog-stereo
Cookie: 1cf5:ffb9
--- End Message ---
