Your message dated Wed, 18 Mar 2020 02:50:51 +0000
with message-id <[email protected]>
and subject line Bug#954062: Removed package(s) from unstable
has caused the Debian Bug report #694251,
regarding SD/MMC card reader not working after resume
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
694251: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=694251
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: hibernate
Version: 2.0+15+g88d54a8-1
The build-in SD/MMC card reader on my HP ProBook 6460b is not working
after boot of hibernated system. It becomes functional after reloading
module sdhci_pci. It should be fixed by putting it to
/etc/hibernate/blacklisted-modules.
root@viskup:~# lspci -vvv -s 23:00.1
23:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev
30)
Subsystem: Hewlett-Packard Company Device 161d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4504000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at bfb00000 [disabled] [size=32K]
Capabilities: [a4] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel driver in use: sdhci-pci
root@viskup:~# cat /etc/debian_version
wheezy/sid
root@viskup:~# uname -a
Linux viskup 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
Best regards,
--
Peter Viskup
--- End Message ---
--- Begin Message ---
Version: 2.0+15+g88d54a8-1+rm
Dear submitter,
as the package hibernate has just been removed from the Debian archive
unstable we hereby close the associated bug reports. We are sorry
that we couldn't deal with your issue properly.
For details on the removal, please see https://bugs.debian.org/954062
The version of this package that was in Debian prior to this removal
can still be found using http://snapshot.debian.org/.
Please note that the changes have been done on the master archive and
will not propagate to any mirrors until the next dinstall run at the
earliest.
This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
[email protected].
Debian distribution maintenance software
pp.
Scott Kitterman (the ftpmaster behind the curtain)
--- End Message ---
