Your message dated Wed, 18 Mar 2020 02:50:51 +0000
with message-id <[email protected]>
and subject line Bug#954062: Removed package(s) from unstable
has caused the Debian Bug report #601934,
regarding hibernate: Option to run commands on X server
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
601934: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601934
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: hibernate
Version: 1.99-1.1
Severity: wishlist
I found no option to run commands with environment set up so that they
can connect to the X server.
There is LockXScreensaver option already so I modified it to allow
executing arbitrary user commands.
Perhaps it could be futher improver by allowing a list of programs to
search for rather than a single program.
-- Package-specific info:
--- configuration
==> /etc/hibernate/common.conf <==
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 3
AlwaysKill yes
Distribution debian
SaveClock restore-only
LockXScreenSaver yes
XOnResume 02 wacset
XOnResume 02 lmouse
UnloadModules wacom button
UnloadBlacklistedModules yes
LoadModules auto
IncompatiblePrograms xmms2d
RestartServices acpid
SwitchToTextMode yes
XStatus x
XmessageDisable yes
XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*'
--colour=Green --shadow 1 --pos bottom --align center --offset 50
==> /etc/hibernate/disk.conf <==
TryMethod ususpend-disk.conf
TryMethod sysfs-disk.conf
==> /etc/hibernate/hibernate.conf <==
TryMethod suspend2.conf
TryMethod disk.conf
TryMethod ram.conf
==> /etc/hibernate/ram.conf <==
TryMethod ususpend-ram.conf
TryMethod sysfs-ram.conf
==> /etc/hibernate/suspend2.conf <==
UseSuspend2 yes
Reboot no
EnableEscape yes
DefaultConsoleLevel 1
Compressor lzf
Encryptor none
FullSpeedCPU yes
Include common.conf
==> /etc/hibernate/sysfs-disk.conf <==
UseSysfsPowerState disk
Include common.conf
==> /etc/hibernate/sysfs-ram.conf <==
UseSysfsPowerState mem
Include common.conf
==> /etc/hibernate/ususpend-both.conf <==
USuspendMethod both
Include common.conf
==> /etc/hibernate/ususpend-disk.conf <==
USuspendMethod disk
Include common.conf
==> /etc/hibernate/ususpend-ram.conf <==
USuspendMethod ram
Include common.conf
--- /sys/power
==> /sys/power/disk <==
[platform] test testproc shutdown reboot
==> /sys/power/image_size <==
481067499
==> /sys/power/pm_async <==
1
==> /sys/power/pm_test <==
[none] core processors platform devices freezer
==> /sys/power/resume <==
8:6
==> /sys/power/state <==
standby mem disk
==> /sys/power/wakeup_count <==
0
--- log
-- System Information:
Debian Release: squeeze/sid
APT prefers stable
APT policy: (990, 'stable'), (500, 'testing'), (300, 'unstable'), (295,
'experimental'), (290, 'stable-i386'), (280, 'testing-i386'), (270,
'unstable-i386'), (150, 'experimental-i386')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.36-rc4-r600fence-netpollirq-smbinit-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages hibernate depends on:
ii console-tools 1:0.2.3dbs-65.1 Linux console and font utilities
Versions of packages hibernate recommends:
ii dash 0.5.5.1-6 POSIX-compliant shell
ii hdparm 8.9-3 tune hard disk parameters for high
ii uswsusp 0.8-1.2+b1 tools to use userspace software su
ii vbetool 1.0-3 run real-mode video BIOS code to a
Versions of packages hibernate suggests:
pn 915resolution <none> (no description available)
ii xscreensaver 5.11-1+b1 Automatic screensaver for X
-- Configuration Files:
/etc/hibernate/blacklisted-modules changed:
nvidia
acx100
acx_pci
hsfmodem
prism54
oss_hdaudio
bcm4400 2.6.0 2.6.99
emu10k1 2.4.0 2.4.99 2.6.0 2.6.99
forcedeth 2.4.0 2.4.99 2.6.0 2.6.99
@ipw2100 0.0 1.0.2
@ipw2200 0.0 0.20
natsemi 2.6.0 2.6.99
psmouse 2.6.0 2.6.19
rt2400 2.4.0 2.4.99 2.6.0 2.6.99
ehci_hcd 2.6.0 2.6.14
ohci_hcd 2.6.0 2.6.14
uhci_hcd 2.6.0 2.6.14
ehci-hcd 2.4.0 2.4.99
usb-ohci 2.4.0 2.4.99
usb-uhci 2.4.0 2.4.99
snd_ens1370 2.6.0 2.6.99
snd_ens1371 2.6.0 2.6.99
snd_maestro3 2.6.0 2.6.99
@snd_bt_sco 0.0 1.18
en1370 2.6.0 2.6.99
en1371 2.6.0 2.6.99
via_agp 2.6.0 2.6.8
via_rhine 2.6.0 2.6.99
i8042 2.6.10 2.6.99
intel_mch_agp 2.6.0 2.6.99
rt2500 2.6.0 2.6.14
button 2.6.9 2.6.22
speedstep_smi 2.6.12 2.6.99
@ndiswrapper 0.10 0.11
ath_pci
ipw3945
iwl3945
mac80211
sky2
uvcvideo
/etc/hibernate/common.conf changed:
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 3
AlwaysKill yes
Distribution debian
SaveClock restore-only
LockXScreenSaver yes
XOnResume 02 wacset
XOnResume 02 lmouse
UnloadModules wacom button
UnloadBlacklistedModules yes
LoadModules auto
IncompatiblePrograms xmms2d
RestartServices acpid
SwitchToTextMode yes
XStatus x
XmessageDisable yes
XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*'
--colour=Green --shadow 1 --pos bottom --align center --offset 50
-- no debconf information
-- debsums errors found:
debsums: no md5sums for hibernate
# -*- sh -*-
# vim:ft=sh:ts=8:sw=4:noet
X_PROGRAM=xscreensaver
AddConfigHandler XMiscLaunchOptions
AddConfigHelp "XProgram <program used to find the X session. xscreensaver or a
session manager is a good candidate."
AddConfigHelp "XOnSuspend NN <program to execute> [parameters for program]"
"Executes a given program before suspending. NN is a two-digit number between
00 and 99, inclusive - a higher number means the program will be executed later
in the suspend process. See the ORDERING section in the SCRIPTLET-API for
details."
AddConfigHelp "XOnResume NN <program to execute> [parameters for program]"
"Executes a given program after resuming. NN is a number between 00 and 99,
inclusive - a higher number means the program will be executed earlier in the
resume process. See the ORDERING section in the SCRIPTLET-API for details."
XRun() {
local xpid
for xpid in `pidof "$X_PROGRAM"` ; do
local xuser xdisp xauth xhome
xuser=$(awk 'BEGIN{RS="\\000";FS="="}($1 == "USER"){print $2}' <
/proc/$xpid/environ)
xdisp=$(awk 'BEGIN{RS="\\000";FS="="}($1 == "DISPLAY"){print $2}' <
/proc/$xpid/environ)
xauth=$(awk 'BEGIN{RS="\\000";FS="="}($1 == "XAUTHORITY"){print $2}' <
/proc/$xpid/environ)
if [ -z "$xauth" ] ; then
xhome=$(awk 'BEGIN{RS="\\000";FS="="}($1 == "HOME"){print $2}' <
/proc/$xpid/environ)
xauth="$xhome/.Xauthority"
fi
vecho 2 "Running $@ on $xuser's display $xdisp using authority file
$xauth"
DISPLAY=$xdisp XAUTHORITY=$xauth su $xuser -c "$*"
if [ $? -ne 0 ] ; then
vecho 0 "Failed to run $@ on $xdisp using authority file $xauth."
fi
done
# Failing is silly. What would they do about it?
return 0
}
XMISC_LAUNCH_COUNT=0
XMiscLaunchSuspendProg() {
local tmpf
MISC_LAUNCH_COUNT=$(($MISC_LAUNCH_COUNT+1))
tmpf=`mktemp /tmp/tmp.hibernate.XXXXXX`
AddSuspendHook $1 XMiscLaunchAuxFunc$MISC_LAUNCH_COUNT
shift
cat <<EOT > $tmpf
XMiscLaunchAuxFunc${MISC_LAUNCH_COUNT}() {
vcat 3 <<EOT2
Executing XRun $@...
EOT2
XRun $@
[ \$? -ne 0 ] && return 1
return 0
}
EOT
. $tmpf
rm -f $tmpf
}
XMiscLaunchResumeProg() {
local tmpf
MISC_LAUNCH_COUNT=$(($MISC_LAUNCH_COUNT+1))
tmpf=`mktemp /tmp/tmp.hibernate.XXXXXX`
AddResumeHook $1 XMiscLaunchAuxFunc$MISC_LAUNCH_COUNT
shift
cat <<EOT > $tmpf
XMiscLaunchAuxFunc${MISC_LAUNCH_COUNT}() {
vcat 3 <<EOT2
Executing XRun $@...
EOT2
XRun $@
[ \$? -ne 0 ] && return 1
return 0
}
EOT
. $tmpf
rm -f $tmpf
}
XMiscLaunchOptions() {
case $1 in
xonsuspend)
shift
if ! IsANumber $1 ; then
vecho 0 "First argument to XOnSuspend must be a number between
00 and 99!"
exit 1
fi
XMiscLaunchSuspendProg $*
;;
xonresume)
shift
if ! IsANumber $1 ; then
vecho 0 "First argument to XOnResume must be a number between
00 and 99!"
exit 1
fi
XMiscLaunchResumeProg $*
;;
xprogram)
shift
if [ -z "$1" ] ; then
vecho 0 "XProgram requires a program name as argument!"
exit 1
fi
X_PROGRAM="$1"
;;
*)
return 1
esac
return 0
}
--- End Message ---
--- Begin Message ---
Version: 2.0+15+g88d54a8-1+rm
Dear submitter,
as the package hibernate has just been removed from the Debian archive
unstable we hereby close the associated bug reports. We are sorry
that we couldn't deal with your issue properly.
For details on the removal, please see https://bugs.debian.org/954062
The version of this package that was in Debian prior to this removal
can still be found using http://snapshot.debian.org/.
Please note that the changes have been done on the master archive and
will not propagate to any mirrors until the next dinstall run at the
earliest.
This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
[email protected].
Debian distribution maintenance software
pp.
Scott Kitterman (the ftpmaster behind the curtain)
--- End Message ---
