Your message dated Thu, 21 May 2020 09:06:54 -0400
with message-id <6391280.kFZihK40Ys@t450>
and subject line Re: Bug#954861 (done): fixed MAC randomization with long
interface names
has caused the Debian Bug report #954861,
regarding Failed to connect on a connection using ath9k in stretch
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
954861: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954861
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: firmware-atheros
https://packages.debian.org/stretch/firmware-atheros
https://packages.debian.org/jessie/firmware-atheros
https://packages.debian.org/jessie-backports/firmware-atheros
Severity: normal
Tags: stretch jessie ath9k
Dear Maintainer,
I report that I can not connect to a network using the Atheros firmware.
However, the device works properly but does not connect to a network.
It works on jessie but does not work on stretch. This has been tested.
Remembering that I am following the Debian documentation
https://wiki.debian.org/ath9k_htc
Linux wireless documentation: https://wireless.wiki.kernel.org/en/
users/drivers/ath9k
-- System Information:
Debian Release: 9.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8),
LANGUAGE=pt_BR:pt:en (charmap=UTF-8)
Log sudo dmesg
[ 0.974410] ahci 0000:00:1f.2: version 3.0
[ 0.974671] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.984865] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps
0x1d impl SATA mode
[ 0.984883] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led
clo pio slum part ems sxs apst
[ 1.018788] scsi host0: ahci
[ 1.018967] scsi host1: ahci
[ 1.019151] scsi host2: ahci
[ 1.019272] scsi host3: ahci
[ 1.019401] scsi host4: ahci
[ 1.019522] scsi host5: ahci
[ 1.019584] ata1: SATA max UDMA/133 abar m2048@0x90608000 port
0x90608100 irq 25
[ 1.019585] ata2: DUMMY
[ 1.019587] ata3: SATA max UDMA/133 abar m2048@0x90608000 port
0x90608200 irq 25
[ 1.019589] ata4: SATA max UDMA/133 abar m2048@0x90608000 port
0x90608280 irq 25
[ 1.019592] ata5: SATA max UDMA/133 abar m2048@0x90608000 port
0x90608300 irq 25
[ 1.019592] ata6: DUMMY
[ 1.281887] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.301870] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.333812] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.387800] ata1.00: ATA-8: TOSHIBA MQ01ABD032, AX001F, max UDMA/100
[ 1.387805] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.390148] ata1.00: configured for UDMA/100
[ 1.390673] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 1F
PQ: 0 ANSI: 5
[ 1.430294] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.430310] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.430937] hub 1-1:1.0: USB hub found
[ 1.431077] hub 1-1:1.0: 6 ports detected
[ 1.450551] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.450557] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.451200] hub 2-1:1.0: USB hub found
[ 1.451339] hub 2-1:1.0: 6 ports detected
[ 1.717827] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.745454] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.747641] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100
[ 1.752105] ata3.00: configured for UDMA/100
[ 1.764503] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB
SC00 PQ: 0 ANSI: 5
[ 1.775537] random: fast init done
[ 1.817813] tsc: Refined TSC clocksource calibration: 2095.243 MHz
[ 1.817830] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1e33a2d1c95, max_idle_ns: 440795290169 ns
[ 1.830198] usb 1-1.4: New USB device found, idVendor=2232,
idProduct=1028
[ 1.830203] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.830206] usb 1-1.4: Product: WebCam SC-03FFL11939N
[ 1.830208] usb 1-1.4: Manufacturer: Image Processor
[ 1.890230] psmouse serio1: synaptics: queried max coordinates: x
[..5772], y [..5130]
[ 1.924941] psmouse serio1: synaptics: queried min coordinates: x
[1196..], y [878..]
[ 1.990126] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id:
0x1c0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 1871, fw id: 1097399
[ 2.032167] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/
serio1/input/input2
[ 2.097944] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.413891] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.421458] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 2.421463] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.421630] sd 0:0:0:0: [sda] Write Protect is off
[ 2.421637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.421699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.446860] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 2.446866] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.447436] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.557979] sda: sda1 sda2 < sda5 >
[ 2.559453] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.842127] clocksource: Switched to clocksource tsc
[ 2.911369] PM: Starting manual resume from disk
[ 2.911374] PM: Hibernation image partition 8:5 present
[ 2.911375] PM: Looking for hibernation image.
[ 2.911647] PM: Image not found (code -22)
[ 2.911649] PM: Hibernation image not present or could not be loaded.
[ 3.224319] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: (null)
[ 4.845042] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.043117] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.043454] systemd[1]: Detected architecture x86-64.
[ 5.058392] systemd[1]: Set hostname to <debian-pc>.
[ 5.226236] random: crng init done
[ 6.951691] systemd[1]: Reached target Remote File Systems.
[ 6.952166] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 6.952501] systemd[1]: Created slice User and Session Slice.
[ 6.952605] systemd[1]: Listening on Syslog Socket.
[ 6.952696] systemd[1]: Listening on udev Control Socket.
[ 6.952948] systemd[1]: Created slice System Slice.
[ 6.954146] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.849836] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.013460] lp: driver loaded but no devices found
[ 8.149275] systemd-journald[217]: Received request to flush runtime
journal from PID 1
[ 8.321517] ppdev: user-space parallel port driver
[ 8.353725] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 8.489090] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.709777] wmi: Mapper loaded
[ 11.829747] ACPI: AC Adapter [ADP1] (off-line)
[ 11.830621] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:
00/PNP0C0D:00/input/input3
[ 11.830625] ACPI: Lid Switch [LID0]
[ 11.830675] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:
00/PNP0C0C:00/input/input4
[ 11.830678] ACPI: Power Button [PWRB]
[ 11.830723] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:
00/input/input5
[ 11.830725] ACPI: Power Button [PWRF]
[ 11.972720] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840
ms ovfl timer
[ 11.972721] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 11.972722] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 11.972723] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 12.002319] ACPI: Battery Slot [BAT1] (battery present)
[ 12.053316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.076748] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.122782] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.122826] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 12.197197] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F
conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO)
(20160831/utaddress-247)
[ 12.197204] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 12.197207] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F
conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO)
(20160831/utaddress-247)
[ 12.197211] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 12.197212] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F
conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO)
(20160831/utaddress-247)
[ 12.197215] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 12.197215] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F
conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO)
(20160831/utaddress-247)
[ 12.197218] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 12.197219] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.568415] [drm] Initialized
[ 12.709859] samsung_laptop: detected SABI interface: SwSmi@
[ 12.977157] Intel(R) Wireless WiFi driver for Linux
[ 12.977161] Copyright(c) 2003- 2015 Intel Corporation
[ 12.977483] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have
ASPM control
[ 13.012353] iwlwifi 0000:01:00.0: firmware: direct-loading firmware
iwlwifi-100-5.ucode
[ 13.012593] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1
build 32895 op_mode iwldvm
[ 13.092825] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 13.092830] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 13.092832] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 13.092836] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R)
Wireless-N 100 BGN, REV=0x6C
[ 13.094950] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 13.154158] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.220198] iTCO_vendor_support: vendor-support=0
[ 13.230319] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.230377] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 13.230546] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.478990] [drm] Memory usable by graphics device = 2048M
[ 13.478994] [drm] Replacing VGA console driver
[ 13.479684] Console: switching to colour dummy device 80x25
[ 13.485418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.485421] [drm] Driver supports precise vblank timestamp query.
[ 13.488003] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=
io+mem,decodes=io+mem:owns=io+mem
[ 13.521075] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
no)
[ 13.521251] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:
00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.521404] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on
minor 0
[ 13.524297] fbcon: inteldrmfb (fb0) is primary device
[ 14.002428] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 14.002432] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 14.002435] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 14.002438] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.002439] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.002443] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 14.002446] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 14.594668] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 14.594675] Console: switching to colour frame buffer device 170x48
[ 14.599378] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:
1b.0/sound/card0/input8
[ 14.599600] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.599808] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.616552] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.858875] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 14.977355] intel_rapl: Found RAPL domain package
[ 14.977359] intel_rapl: Found RAPL domain core
[ 14.977361] intel_rapl: Found RAPL domain uncore
[ 14.977371] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 15.132069] media: Linux media interface: v0.10
[ 15.157513] Linux video capture interface: v2.00
[ 15.294450] uvcvideo: Found UVC 1.00 device WebCam SC-03FFL11939N
(2232:1028)
[ 15.312776] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was
not initialized!
[ 15.312781] uvcvideo 1-1.4:1.0: Entity type for entity Extension 2 was
not initialized!
[ 15.312783] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not
initialized!
[ 15.312934] input: WebCam SC-03FFL11939N as /devices/pci0000:00/0000:00:
1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input11
[ 15.313051] usbcore: registered new interface driver uvcvideo
[ 15.313052] USB Video Class driver (1.1.1)
[ 15.572599] Adding 2007036k swap on /dev/sda5. Priority:-1 extents:1
across:2007036k FS
[ 17.297166] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 17.408619] usb 2-1.1: New USB device found, idVendor=046d,
idProduct=c52f
[ 17.408625] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 17.408628] usb 2-1.1: Product: USB Receiver
[ 17.408631] usb 2-1.1: Manufacturer: Logitech
[ 18.053976] hidraw: raw HID events driver (C) Jiri Kosina
[ 18.284598] usbcore: registered new interface driver usbhid
[ 18.284601] usbhid: USB HID core driver
[ 18.434766] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:
1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C52F.0001/input/input12
[ 18.435049] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 18.436105] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:
1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/input/input13
[ 18.493701] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 18.539490] vboxdrv: loading out-of-tree module taints kernel.
[ 18.547981] vboxdrv: Found 4 processor cores
[ 18.565379] vboxdrv: TSC mode is Invariant, tentative frequency
2095241599 Hz
[ 18.565381] vboxdrv: Successfully loaded version 5.0.40 (interface
0x00240000)
[ 19.881821] VBoxNetFlt: Successfully started.
[ 20.862959] VBoxNetAdp: Successfully started.
[ 20.948724] VBoxPciLinuxInit
[ 21.152586] vboxpci: IOMMU not found (not registered)
[ 27.058369] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 27.058726] r8169 0000:02:00.0: firmware: failed to load
rtl_nic/rtl8168e-3.fw (-2)
[ 27.058825] r8169 0000:02:00.0: Direct firmware load for
rtl_nic/rtl8168e-3.fw failed with error -2
[ 27.058831] r8169 0000:02:00.0 enp2s0: unable to load firmware patch
rtl_nic/rtl8168e-3.fw (-2)
[ 27.078934] r8169 0000:02:00.0 enp2s0: link down
[ 27.079007] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 27.108087] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 27.110428] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.117837] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.117941] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 27.164811] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.172219] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.172323] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 27.206232] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 27.214540] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.221924] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.222026] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 27.268458] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.275860] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 27.275961] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 27.310390] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 28.321966] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 60.854337] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 60.861913] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 60.862018] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 60.907305] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 60.914695] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 60.914797] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 60.949258] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 61.438538] wlp1s0: authenticate with 00:26:5a:b2:77:a6
[ 61.443807] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 61.446174] wlp1s0: authenticated
[ 61.447248] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3)
[ 61.451375] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31
status=0 aid=5)
[ 61.457140] wlp1s0: associated
[ 61.457232] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 135.155911] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[ 135.281568] usb 2-1.2: New USB device found, idVendor=0cf3,
idProduct=9271
[ 135.281574] usb 2-1.2: New USB device strings: Mfr=16, Product=32,
SerialNumber=48
[ 135.281578] usb 2-1.2: Product: USB2.0 WLAN
[ 135.281581] usb 2-1.2: Manufacturer: ATHEROS
[ 135.281584] usb 2-1.2: SerialNumber: 12345
[ 135.655682] [UFW BLOCK] IN=wlp1s0 OUT= MAC=
SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=354787 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 135.655716] [UFW BLOCK] IN=wlp1s0 OUT= MAC=
SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=1031983 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 135.665975] [UFW BLOCK] IN=wlp1s0 OUT= MAC=
SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=354787 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 135.665999] [UFW BLOCK] IN=wlp1s0 OUT= MAC=
SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=1031983 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 135.748466] usb 2-1.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 135.748636] usbcore: registered new interface driver ath9k_htc
[ 135.772628] usb 2-1.2: firmware: direct-loading firmware
ath9k_htc/htc_9271-1.4.0.fw
[ 136.062040] usb 2-1.2: ath9k_htc: Transferred FW:
ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 136.312897] ath9k_htc 2-1.2:1.0: ath9k_htc: HTC initialized with 33
credits
[ 136.546501] ath9k_htc 2-1.2:1.0: ath9k_htc: FW Version: 1.4
[ 136.546507] ath9k_htc 2-1.2:1.0: FW RMW support: On
[ 136.546510] ath: EEPROM regdomain: 0x809c
[ 136.546512] ath: EEPROM indicates we should expect a country code
[ 136.546514] ath: doing EEPROM country->regdmn map search
[ 136.546516] ath: country maps to regdmn code: 0x52
[ 136.546518] ath: Country alpha2 being used: CN
[ 136.546519] ath: Regpair used: 0x52
[ 136.558676] ieee80211 phy1: Atheros AR9271 Rev:1
[ 136.574196] ath9k_htc 2-1.2:1.0 wlxe894f6285298: renamed from wlan0
[ 136.614335] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 136.749694] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 136.928525] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 136.969580] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 138.714869] wlp1s0: deauthenticating from 00:26:5a:b2:77:a6 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 138.733798] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 138.741203] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 138.741305] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 138.786891] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 138.794316] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 138.794414] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 138.828258] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 142.769477] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 150.533585] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6
[ 150.725072] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 150.732169] wlxe894f6285298: authenticated
[ 155.729297] wlxe894f6285298: aborting authentication with
00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 157.071754] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6
[ 157.265714] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 157.273008] wlxe894f6285298: authenticated
[ 162.269269] wlxe894f6285298: aborting authentication with
00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 164.038142] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6
[ 164.228022] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 164.230380] wlxe894f6285298: authenticated
[ 169.228625] wlxe894f6285298: aborting authentication with
00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 171.456520] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6
[ 171.645193] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 171.648397] wlxe894f6285298: authenticated
[ 174.621021] wlxe894f6285298: aborting authentication with
00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 174.693321] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 174.866291] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 224.566776] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 224.574558] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 224.574669] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 224.623522] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 224.630970] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 224.631067] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 224.665048] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 225.188867] wlp1s0: authenticate with 00:26:5a:b2:77:a6
[ 225.193984] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 225.196320] wlp1s0: authenticated
[ 225.199215] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3)
[ 225.203097] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31
status=0 aid=5)
[ 225.210379] wlp1s0: associated
[ 225.210474] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 235.209782] wlp1s0: deauthenticating from 00:26:5a:b2:77:a6 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 235.735840] wlp1s0: authenticate with 00:26:5a:b2:77:a6
[ 235.739928] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 235.742464] wlp1s0: authenticated
[ 235.745530] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3)
[ 235.749517] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31
status=0 aid=5)
[ 235.755368] wlp1s0: associated
[ 239.474572] wlp1s0: deauthenticating from 00:26:5a:b2:77:a6 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 239.487819] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 239.495227] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 239.495322] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 239.541182] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 239.548585] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 239.548683] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 239.586615] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 241.220717] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 241.228112] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 241.228210] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 241.272999] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 241.280405] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 241.280505] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 241.318817] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 241.363702] wlp1s0: authenticate with 00:26:5a:b2:77:a6
[ 241.366848] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3)
[ 241.369169] wlp1s0: authenticated
[ 241.372597] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3)
[ 241.376476] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31
status=0 aid=5)
[ 241.383206] wlp1s0: associated
[ 241.383293] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 518.763984] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 833.732377] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 1148.718927] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
[ 1463.693279] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
--- End Message ---
--- Begin Message ---
Version: 2:2.9.0-12
> Control: unblock 895696 by -1
> Control: forcemerge 895696 870159
> Control: affects -1 firmware-ath9k-htc
> Control: reassign 895696 wpasupplicant
> Control: forcemerge -1 895696
>
> Debian bug number was missed in the changelog, but this has been fixed, and
> I can also report that this was also the cause of issues with ath9k-htc.
> I'm merging in those and will mark done momentarily.
>
> wpa (2:2.9.0-12) unstable; urgency=medium
>
> * Add an upstream patch to fix the MAC randomisation issue with some cards
> (LP: #1867908).
>
> -- Andrej Shadura <andre...@debian.org> Tue, 24 Mar 2020 11:13:16 +0100
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
