Your message dated Sun, 09 May 2021 13:25:48 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #834407,
regarding `~PB TK81 fails to resume from hibernate
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
834407: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=834407
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.6.4-1
Severity: normal

Packard Easynote TK81 fails to resume from
 hibernate,
 the image however does load correctly but some devices failed to power down,
 aborting the resume, suspend does work

Dear Maintainer,

   * What led up to the situation?
    Booting from hibernate mode. 
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
    Disabling kms (not effective), disabling following options in 
/etc/environment
    #VDPAU_DRIVER=r600
    #LIBVA_DRIVER_NAME=gallium
    #R600_HYPERZ=1
    #R600_TILING=1
    #R600_SURF=1
    #R600_GLSL130=1
    #R600_ENABLE_S3TC=1
    #R600_STREAMOUT=1

   * What was the outcome of this action?
    Resuming from hibernate aborts to load the image, instead a new session 
will be started

    [   10.765619] PM: Loading hibernation image.
    [   10.765753] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
    [   10.765755] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
    [   10.765759] PM: Marking nosave pages: [mem 0xde555000-0xde754fff]
    [   10.765769] PM: Marking nosave pages: [mem 0xdfd3f000-0xdfef6fff]
    [   10.765778] PM: Marking nosave pages: [mem 0xdff00000-0xffffffff]
    [   10.766262] PM: Basic memory bitmaps created
    [   10.823568] PM: Using 3 thread(s) for decompression.
               PM: Loading and decompressing image data (282552 pages)...
    [   10.871384] random: nonblocking pool is initialized
    [   11.039372] PM: Image loading progress:   0%
    [   11.832985] PM: Image loading progress:  10%
    [   12.154381] PM: Image loading progress:  20%
    [   12.535142] PM: Image loading progress:  30%
    [   12.886523] PM: Image loading progress:  40%
    [   13.184643] PM: Image loading progress:  50%
    [   13.496085] PM: Image loading progress:  60%
    [   13.832874] PM: Image loading progress:  70%
    [   14.192884] PM: Image loading progress:  80%
    [   14.502166] PM: Image loading progress:  90%
    [   14.736578] PM: Image loading progress: 100%
    [   14.736958] PM: Image loading done.
    [   14.736977] PM: Read 1130208 kbytes in 3.91 seconds (289.05 MB/s)
    [   14.738147] PM: Image successfully loaded
    [   14.738154] Suspending console(s) (use no_console_suspend to debug)
    [   15.533363] PM: quiesce of devices complete after 795.070 msecs
    [   15.533757] PM: late quiesce of devices complete after 0.390 msecs
    [   15.546126] ohci-pci 0000:00:12.0: Root hub is not suspended
    [   15.546149] pci_pm_freeze_noirq(): check_root_hub_suspended+0x0/0x60 
[usbcore
    ] returns -16
    [   15.546154] dpm_run_callback(): pci_pm_freeze_noirq+0x0/0xd0 returns -16
    [   15.546155] PM: Device 0000:00:12.0 failed to quiesce async: error -16
    [   15.546389] PM: noirq recover of devices complete after 0.206 msecs
    [   15.546604] PM: early recover of devices complete after 0.199 msecs
    [   15.546606] PM: Some devices failed to power down, aborting resume
    [   15.546723] rtc_cmos 00:01: System wakeup disabled by ACPI
    
[   15.547062] ------------[ cut here ]------------
[   15.547082] WARNING: CPU: 0 PID: 477 at /build/linux-aOJbQa/linux-4.6.4/drive
rs/usb/core/urb.c:338 usb_submit_urb+0x2be/0x5a0 [usbcore]
[   15.547083] URB ffff880036025780 submitted while active
[   15.547097] Modules linked in: xts(E) gf128mul(E) algif_skcipher(E) af_alg(E)
 dm_crypt(E) dm_mod(E) sr_mod(E) cdrom(E) sd_mod(E) psmouse(E) ohci_pci(E) broad
com(E) bcm_phy_lib(E) radeon(E) i2c_algo_bit(E) tg3(E) ohci_hcd(E) ptp(E) pps_co
re(E) libphy(E) drm_kms_helper(E) ttm(E) ahci(E) libahci(E) ehci_pci(E) drm(E) e
hci_hcd(E) libata(E) usbcore(E) usb_common(E) scsi_mod(E) thermal(E) fjes(E)
[   15.547100] CPU: 0 PID: 477 Comm: kworker/u8:3 Tainted: G            E   4.6.
0-1-amd64 #1 Debian 4.6.4-1
[   15.547101] Hardware name: Packard Bell EasyNote TK81/SJV52_DN, BIOS V2.14 07
/27/2011
[   15.547107] Workqueue: events_unbound async_run_entry_fn
[   15.547110]  0000000000000286 00000000a7e78916 ffffffff81311505 ffff880035a83
c18
[   15.547111]  0000000000000000 ffffffff8107a50e ffff880036025780 ffff880035a83
c70
[   15.547113]  0000000000000005 ffff880036058800 0000000000000000 ffff880036320
400
[   15.547113] Call Trace:

[   15.547121]  [<ffffffff81311505>] ? dump_stack+0x5c/0x77
[   15.547125]  [<ffffffff8107a50e>] ? __warn+0xbe/0xe0
[   15.547127]  [<ffffffff8107a58f>] ? warn_slowpath_fmt+0x5f/0x80
[   15.547135]  [<ffffffffc006b246>] ? hub_ext_port_status+0xe6/0x140 [usbcore]
[   15.547144]  [<ffffffffc00771ae>] ? usb_submit_urb+0x2be/0x5a0 [usbcore]
[   15.547152]  [<ffffffffc006e5c6>] ? hub_activate+0x206/0x680 [usbcore]
[   15.547155]  [<ffffffff81035875>] ? sched_clock+0x5/0x10
[   15.547162]  [<ffffffffc006a270>] ? usb_dev_restore+0x20/0x20 [usbcore]
[   15.547170]  [<ffffffffc006eb53>] ? hub_resume+0x23/0x50 [usbcore]
[   15.547179]  [<ffffffffc007ae0c>] ? usb_resume_interface.isra.6+0x9c/0x100 [u
sbcore]
[   15.547187]  [<ffffffffc007b092>] ? usb_resume_both+0x62/0x110 [usbcore]
[   15.547196]  [<ffffffffc007ba76>] ? usb_resume+0x16/0x60 [usbcore]
[   15.547203]  [<ffffffffc006a27f>] ? usb_dev_thaw+0xf/0x20 [usbcore]
[   15.547206]  [<ffffffff8144bfb8>] ? dpm_run_callback+0x48/0x120
[   15.547208]  [<ffffffff8144c3f2>] ? device_resume+0x82/0x190
[   15.547209]  [<ffffffff8144c519>] ? async_resume+0x19/0x40
[   15.547211]  [<ffffffff8109b605>] ? async_run_entry_fn+0x45/0x130
[   15.547213]  [<ffffffff81092dcd>] ? process_one_work+0x15d/0x410
[   15.547215]  [<ffffffff810930cd>] ? worker_thread+0x4d/0x480
[   15.547217]  [<ffffffff81093080>] ? process_one_work+0x410/0x410
[   15.547219]  [<ffffffff81098f1d>] ? kthread+0xcd/0xf0
[   15.547221]  [<ffffffff815c69b2>] ? ret_from_fork+0x22/0x40
[   15.547223]  [<ffffffff81098e50>] ? kthread_create_on_node+0x190/0x190
[   15.547224] ---[ end trace d873ef324f50b7f5 ]---
[   15.547227] hub 3-0:1.0: activate --> -16

   * What outcome did you expect instead?
    Resume from hibernate

-- Package-specific info:
** Version:
Linux version 4.6.0-1-amd64 ([email protected]) (gcc version 5.4.0 
20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=/dev/mapper/vg0-root ro 
cryptdevice=UUID=76acea5b-d7d6-4db8-b4e9-d2355100dad:lvm 
resume=/dev/mapper/vg0-swap crypto=sha512:aes-xts-plain64:256:0: iommu=soft 
scsi_mod.use_blk_mq=1 pcie_aspm.policy=powersave ipv6.disable=1 fsck.mode=auto 
fsck.repair=preen quiet

** Tainted: WE (8704)
 * Taint on warning.
 * Unsigned module has been loaded (currently expected).

** Kernel log:
[   18.034287] systemd[1]: Mounted Debug File System.
[   18.034343] systemd[1]: Mounted POSIX Message Queue File System.
[   18.037635] systemd[1]: Started Create list of required static device nodes 
for the current kernel.
[   18.038693] systemd[1]: Starting Create Static Device Nodes in /dev...
[   18.042359] systemd[1]: Mounted Huge Pages File System.
[   18.050321] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   18.051476] systemd[1]: Started Remount Root and Kernel File Systems.
[   18.055345] systemd[1]: Starting udev Coldplug all Devices...
[   18.060435] systemd[1]: Started Apply Kernel Variables.
[   18.067280] systemd[1]: Started LVM2 metadata daemon.
[   18.078326] systemd[1]: Started Journal Service.
[   18.089906] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.099109] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   18.127274] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.287440] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   18.287447] ACPI: Power Button [PWRB]
[   18.287502] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[   18.287505] ACPI: Sleep Button [SLPB]
[   18.287575] input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[   18.287623] ACPI: Lid Switch [LID]
[   18.287672] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   18.287674] ACPI: Power Button [PWRF]
[   18.288198] ACPI: processor limited to max C-state 1
[   18.305589] ACPI: AC Adapter [ACAD] (off-line)
[   18.308217] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.308977] wmi: Mapper loaded
[   18.309995] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[   18.316383] acpi-cpufreq: overriding BIOS provided _PSD data
[   18.337734] acpi device:03: registered as cooling_device4
[   18.337814] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:01/input/input7
[   18.401808] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   18.404546] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, 
revision 0
[   18.404558] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port 
selection
[   18.404749] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 
0xb20
[   18.405173] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.405256] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   18.408682] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   18.408768] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision 
ID: 0x42
[   18.408773] sp5100_tco: I/O address 0x0cd6 already in use
[   18.418784] input: HDA ATI HDMI HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[   18.431830] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: 
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   18.431836] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[   18.431839] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x21/0x0/0x0/0x0/0x0)
[   18.431841] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.431843] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.431846] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   18.431848] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   18.444415] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   18.444699] input: HDA ATI SB Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   18.444738] input: HDA ATI SB Headphone as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   18.448281] EDAC MC: Ver: 3.0.0
[   18.450609] MCE: In-kernel MCE decoding enabled.
[   18.454097] AMD64 EDAC driver v3.4.0
[   18.454146] EDAC amd64: DRAM ECC disabled.
[   18.454155] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   18.462769] input: PC Speaker as /devices/platform/pcspkr/input/input12
[   18.486564] media: Linux media interface: v0.10
[   18.494266] Linux video capture interface: v2.00
[   18.523595] ath: phy0: Enable LNA combining
[   18.529286] ath: phy0: ASPM enabled: 0x42
[   18.529293] ath: EEPROM regdomain: 0x60
[   18.529295] ath: EEPROM indicates we should expect a direct regpair map
[   18.529298] ath: Country alpha2 being used: 00
[   18.529300] ath: Regpair used: 0x60
[   18.550109] kvm: Nested Virtualization enabled
[   18.550117] kvm: Nested Paging enabled
[   18.572234] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.572506] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001080000, 
irq=17
[   18.574435] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[   18.586954] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not 
initialized!
[   18.586962] uvcvideo 2-1:1.0: Entity type for entity Processing 3 was not 
initialized!
[   18.586965] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not 
initialized!
[   18.587135] input: 1.3M WebCam as 
/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input13
[   18.587217] usbcore: registered new interface driver uvcvideo
[   18.587219] USB Video Class driver (1.1.1)
[   18.684393] acer_wmi: Acer Laptop ACPI-WMI Extras
[   18.684413] acer_wmi: Function bitmap for Communication Button: 0x1
[   18.706450] input: Acer WMI hotkeys as /devices/virtual/input/input14
[   18.707336] input: Acer BMA150 accelerometer as 
/devices/virtual/input/input15
[   18.713331] Adding 6291452k swap on /dev/mapper/vg0-swap.  Priority:-1 
extents:1 across:6291452k SSFS
[   18.717472] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[   18.733391] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[   18.847678] ath9k 0000:08:00.0 wlp8s0: renamed from wlan0
[   19.155070] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: 
(null)
[   19.179579] systemd-journald[836]: Received request to flush runtime journal 
from PID 1
[   19.201429] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[   19.221392] ACPI: Battery Slot [BAT1] (battery present)
[   19.257807] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: 
(null)
[   19.749355] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[   20.426216] tg3 0000:02:00.0 enp2s0: Link is down
[   21.764041] Bluetooth: Core ver 2.21
[   21.764092] NET: Registered protocol family 31
[   21.764098] Bluetooth: HCI device and connection manager initialized
[   21.764109] Bluetooth: HCI socket layer initialized
[   21.764116] Bluetooth: L2CAP socket layer initialized
[   21.764135] Bluetooth: SCO socket layer initialized
[   87.428182] tg3 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex
[   87.428195] tg3 0000:02:00.0 enp2s0: Flow control is on for TX and on for RX

** Model information
sys_vendor: Packard Bell
product_name: EasyNote TK81
product_version: V2.14
chassis_vendor: Packard Bell
chassis_version: V2.14
bios_vendor: Packard Bell
bios_version: V2.14
board_vendor: Packard Bell
board_name: SJV52_DN
board_version: Base Board Version

** Loaded modules:
bluetooth(E)
msr(E)
cpufreq_stats(E)
acer_wmi(E)
sparse_keymap(E)
arc4(E)
joydev(E)
kvm_amd(E)
kvm(E)
uvcvideo(E)
irqbypass(E)
videobuf2_vmalloc(E)
videobuf2_memops(E)
videobuf2_v4l2(E)
videobuf2_core(E)
evdev(E)
videodev(E)
media(E)
ath9k(E)
ath9k_common(E)
serio_raw(E)
ath9k_hw(E)
pcspkr(E)
ath(E)
edac_mce_amd(E)
mac80211(E)
edac_core(E)
k10temp(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
cfg80211(E)
snd_hda_codec_hdmi(E)
sp5100_tco(E)
i2c_piix4(E)
sg(E)
snd_hda_intel(E)
rfkill(E)
snd_hda_codec(E)
snd_hda_core(E)
snd_hwdep(E)
snd_pcm(E)
snd_timer(E)
snd(E)
soundcore(E)
battery(E)
acpi_cpufreq(E)
tpm_tis(E)
tpm(E)
video(E)
wmi(E)
shpchp(E)
ac(E)
processor(E)
button(E)
ipt_REJECT(E)
nf_reject_ipv4(E)
nf_log_ipv4(E)
nf_log_common(E)
xt_LOG(E)
xt_limit(E)
xt_tcpudp(E)
xt_addrtype(E)
nf_conntrack_ipv4(E)
nf_defrag_ipv4(E)
xt_conntrack(E)
ip6_tables(E)
nf_conntrack_netbios_ns(E)
nf_conntrack_broadcast(E)
nf_nat_ftp(E)
nf_nat(E)
nf_conntrack_ftp(E)
nf_conntrack(E)
iptable_filter(E)
ip_tables(E)
x_tables(E)
autofs4(E)
ext4(E)
ecb(E)
lrw(E)
glue_helper(E)
ablk_helper(E)
cryptd(E)
aes_x86_64(E)
crc16(E)
jbd2(E)
crc32c_generic(E)
mbcache(E)
xts(E)
gf128mul(E)
algif_skcipher(E)
af_alg(E)
dm_crypt(E)
dm_mod(E)
sr_mod(E)
cdrom(E)
sd_mod(E)
psmouse(E)
ohci_pci(E)
broadcom(E)
bcm_phy_lib(E)
radeon(E)
i2c_algo_bit(E)
tg3(E)
ohci_hcd(E)
ptp(E)
pps_core(E)
libphy(E)
drm_kms_helper(E)
ttm(E)
ahci(E)
libahci(E)
ehci_pci(E)
drm(E)
ehci_hcd(E)
libata(E)
usbcore(E)
usb_common(E)
scsi_mod(E)
thermal(E)
fjes(E)

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host 
Bridge [1022:9601]
    Subsystem: Acer Incorporated [ALI] RS880 Host Bridge [1025:0489]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>

00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI 
bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 24
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00006000-00006fff
    Memory behind bridge: f2100000-f21fffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI 
to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 25
    Bus: primary=00, secondary=02, subordinate=07, sec-latency=0
    I/O behind bridge: 00002000-00005fff
    Memory behind bridge: f1100000-f20fffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f0ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI 
to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 26
    Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
    Memory behind bridge: f1000000-f10fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 
1.0])
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI 
mode] [1025:0489]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 28
    Region 0: I/O ports at 7038 [size=8]
    Region 1: I/O ports at 704c [size=4]
    Region 2: I/O ports at 7030 [size=8]
    Region 3: I/O ports at 7048 [size=4]
    Region 4: I/O ports at 7010 [size=16]
    Region 5: Memory at f2207000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
    Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 
[1025:0489]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at f2206000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci-pci
    Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 
[1025:0489]
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at f2207500 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 
[1025:0489]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at f2205000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci-pci
    Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 
[1025:0489]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at f2207400 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus 
Controller [1002:4385] (rev 42)
    Subsystem: Acer Incorporated [ALI] SBx00 SMBus Controller [1025:0489]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Kernel driver in use: piix4_smbus
    Kernel modules: i2c_piix4, sp5100_tco

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 
Azalia (Intel HDA) [1002:4383] (rev 40)
    Subsystem: Acer Incorporated [ALI] SBx00 Azalia (Intel HDA) [1025:0489]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f2200000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 LPC host controller 
[1025:0489]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to 
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 64
    Bus: primary=00, secondary=09, subordinate=09, sec-latency=64
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
    Subsystem: Acer Incorporated [ALI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 
[1025:0489]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f2204000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci-pci
    Kernel modules: ohci_pci

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor HyperTransport Configuration [1022:1200]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor Address Map [1022:1201]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor DRAM Controller [1022:1202]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor Miscellaneous Control [1022:1203]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Capabilities: <access denied>
    Kernel driver in use: k10temp
    Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor Link Control [1022:1204]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M] [1002:6741] 
(prog-if 00 [VGA controller])
    Subsystem: Acer Incorporated [ALI] Radeon HD 6650M [1025:0489]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 27
    Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 2: Memory at f2100000 (64-bit, non-prefetchable) [size=128K]
    Region 4: I/O ports at 6000 [size=256]
    Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: radeon
    Kernel modules: radeon

01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] 
Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
    Subsystem: Acer Incorporated [ALI] Turks/Whistler HDMI Audio [Radeon HD 
6000 Series] [1025:0489]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 29
    Region 0: Memory at f2120000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 
Gigabit Ethernet PCIe [14e4:1692] (rev 01)
    Subsystem: Acer Incorporated [ALI] NetLink BCM57780 Gigabit Ethernet PCIe 
[1025:0489]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 30
    Region 0: Memory at f1100000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: tg3
    Kernel modules: tg3

08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network 
Adapter (PCI-Express) [168c:002b] (rev 01)
    Subsystem: Hewlett-Packard Company U98Z062.12 802.11bgn Wireless Half-size 
Mini PCIe Card [103c:3040]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at f1000000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath9k
    Kernel modules: ath9k


** USB devices:
not available


-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=ISO-8859-1) (ignored: 
LC_ALL set to en_US)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.6.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.125
ii  kmod                                    22-1.1
ii  linux-base                              4.4

Versions of packages linux-image-4.6.0-1-amd64 recommends:
pn  firmware-linux-free  <none>
pn  irqbalance           <none>

Versions of packages linux-image-4.6.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-36
pn  linux-doc-4.6           <none>

Versions of packages linux-image-4.6.0-1-amd64 is related to:
ii  firmware-amd-graphics     20160110-1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20160110-1
ii  firmware-misc-nonfree     20160110-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>



--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply via email to