--- Begin Message ---
Package: baloo-kf5
Version: 5.51.0-1
Severity: important
Dear Maintainer,
after dist-upgrade today I get the following error message in dmesg:
> baloo_file_extr[2787]: segfault at 557db49eb9c0 ip 00007f2dc3164d74 sp
00007ffdf9080a98 error 4 in libc-2.28.so[7f2dc302a000+148000]
If I can provide more info please tell me what you need and how I can get it.
After this dist-upgrade I got alot of problems which might or might not be
related:
* startup takes several minutes (before it was just a matter of seconds)
* takes 10 to 20 seconds until the login screen is shown (while mouse on
blackscreen is working)
* taskbars of Plasma take quite some seconds to load until they appear (after
background and automaticly started software is already running)
* initial change of activity also takes a long time
* sound is not working at all
Here is my output of "dmesg -T"
[12:51:23] microcode: microcode updated early to revision 0xc6, date =
2018-04-17
[12:51:23] Linux version 4.19.0-1-amd64 ([email protected]) (gcc
version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
[12:51:23] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64
root=/dev/mapper/name-vg-root ro quiet intel_iommu=igfx_off
[12:51:23] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[12:51:23] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[12:51:23] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[12:51:23] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[12:51:23] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[12:51:23] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[12:51:23] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[12:51:23] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[12:51:23] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes,
using 'compacted' format.
[12:51:23] BIOS-provided physical RAM map:
[12:51:23] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[12:51:23] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[12:51:23] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[12:51:23] BIOS-e820: [mem 0x000000000008c000-0x00000000000fffff] reserved
[12:51:23] BIOS-e820: [mem 0x0000000000100000-0x00000000aff9bfff] usable
[12:51:23] BIOS-e820: [mem 0x00000000aff9c000-0x00000000aff9cfff] ACPI NVS
[12:51:23] BIOS-e820: [mem 0x00000000aff9d000-0x00000000affc6fff] reserved
[12:51:23] BIOS-e820: [mem 0x00000000affc7000-0x00000000b98c9fff] usable
[12:51:23] BIOS-e820: [mem 0x00000000b98ca000-0x00000000b9907fff] type 20
[12:51:23] BIOS-e820: [mem 0x00000000b9908000-0x00000000bb47bfff] reserved
[12:51:23] BIOS-e820: [mem 0x00000000bb47c000-0x00000000bb4cbfff] ACPI NVS
[12:51:23] BIOS-e820: [mem 0x00000000bb4cc000-0x00000000bb4fefff] ACPI data
[12:51:23] BIOS-e820: [mem 0x00000000bb4ff000-0x00000000bb4fffff] usable
[12:51:23] BIOS-e820: [mem 0x00000000bb500000-0x00000000bf7fffff] reserved
[12:51:23] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[12:51:23] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[12:51:23] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[12:51:23] BIOS-e820: [mem 0x0000000100000000-0x000000043e7fffff] usable
[12:51:23] NX (Execute Disable) protection: active
[12:51:23] efi: EFI v2.40 by Lenovo
[12:51:23] efi: SMBIOS=0xbb104000 ACPI=0xbb4fe000 ACPI 2.0=0xbb4fe014
MPS=0xbb425000 ESRT=0xba1a5000
[12:51:23] secureboot: Secure boot could not be determined (mode 0)
[12:51:23] SMBIOS 2.8 present.
[12:51:23] DMI: LENOVO 20FJS03700/20FJS03700, BIOS N1KET16W (1.03 ) 01/20/2016
[12:51:23] tsc: Detected 2400.000 MHz processor
[12:51:23] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[12:51:23] e820: remove [mem 0x000a0000-0x000fffff] usable
[12:51:23] last_pfn = 0x43e800 max_arch_pfn = 0x400000000
[12:51:23] MTRR default type: write-back
[12:51:23] MTRR fixed ranges enabled:
[12:51:23] 00000-9FFFF write-back
[12:51:23] A0000-BFFFF uncachable
[12:51:23] C0000-FFFFF write-protect
[12:51:23] MTRR variable ranges enabled:
[12:51:23] 0 base 00C0000000 mask 7FC0000000 uncachable
[12:51:23] 1 base 00BE000000 mask 7FFE000000 uncachable
[12:51:23] 2 base 00BD000000 mask 7FFF000000 uncachable
[12:51:23] 3 disabled
[12:51:23] 4 disabled
[12:51:23] 5 disabled
[12:51:23] 6 disabled
[12:51:23] 7 disabled
[12:51:23] 8 disabled
[12:51:23] 9 disabled
[12:51:23] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[12:51:23] last_pfn = 0xbb500 max_arch_pfn = 0x400000000
[12:51:23] esrt: Reserving ESRT space from 0x00000000ba1a5000 to
0x00000000ba1a5060.
[12:51:23] Base memory trampoline at [(____ptrval____)] 60000 size 24576
[12:51:23] Using GB pages for direct mapping
[12:51:23] BRK [0x182a01000, 0x182a01fff] PGTABLE
[12:51:23] BRK [0x182a02000, 0x182a02fff] PGTABLE
[12:51:23] BRK [0x182a03000, 0x182a03fff] PGTABLE
[12:51:23] BRK [0x182a04000, 0x182a04fff] PGTABLE
[12:51:23] BRK [0x182a05000, 0x182a05fff] PGTABLE
[12:51:23] BRK [0x182a06000, 0x182a06fff] PGTABLE
[12:51:23] BRK [0x182a07000, 0x182a07fff] PGTABLE
[12:51:23] BRK [0x182a08000, 0x182a08fff] PGTABLE
[12:51:23] BRK [0x182a09000, 0x182a09fff] PGTABLE
[12:51:23] RAMDISK: [mem 0x346bd000-0x36355fff]
[12:51:23] ACPI: Early table checksum verification disabled
[12:51:23] ACPI: RSDP 0x00000000BB4FE014 000024 (v02 LENOVO)
[12:51:23] ACPI: XSDT 0x00000000BB4D0188 0000D4 (v01 LENOVO TP-N1K 00000000
PTEC 00000002)
[12:51:23] ACPI: FACP 0x00000000BB4F4000 0000F4 (v05 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: DSDT 0x00000000BB4DD000 012371 (v02 LENOVO TP-N1K 00001030
INTL 20141107)
[12:51:23] ACPI: FACS 0x00000000BB49F000 000040
[12:51:23] ACPI: TCPA 0x00000000BB4FC000 000032 (v02 LENOVO TP-N1K 00000002
PTEC 00000002)
[12:51:23] ACPI: SSDT 0x00000000BB4FB000 0003A2 (v02 LENOVO TcgTable 00001000
INTL 20141107)
[12:51:23] ACPI: UEFI 0x00000000BB4B6000 000042 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: SSDT 0x00000000BB4F6000 004E0A (v02 LENOVO SaSsdt 00003000
INTL 20141107)
[12:51:23] ACPI: SSDT 0x00000000BB4F5000 0005C5 (v02 LENOVO PerfTune 00001000
INTL 20141107)
[12:51:23] ACPI: ECDT 0x00000000BB4F3000 000052 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: HPET 0x00000000BB4F2000 000038 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: APIC 0x00000000BB4F1000 0000BC (v03 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: MCFG 0x00000000BB4F0000 00003C (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: SSDT 0x00000000BB4DB000 0018D2 (v01 LENOVO SataAhci 00001000
INTL 20141107)
[12:51:23] ACPI: DBGP 0x00000000BB4DA000 000034 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: DBG2 0x00000000BB4D9000 000054 (v00 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: BOOT 0x00000000BB4D8000 000028 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: BATB 0x00000000BB4D7000 000046 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: SSDT 0x00000000BB4D6000 000E73 (v02 LENOVO CpuSsdt 00003000
INTL 20141107)
[12:51:23] ACPI: SSDT 0x00000000BB4D5000 0003D9 (v02 LENOVO CtdpB 00001000
INTL 20141107)
[12:51:23] ACPI: POAT 0x00000000BB4D4000 000055 (v03 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: DMAR 0x00000000BB4D3000 0000A8 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: ASF! 0x00000000BB4D2000 0000A5 (v32 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: FPDT 0x00000000BB4D1000 000044 (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: UEFI 0x00000000BB49D000 00012A (v01 LENOVO TP-N1K 00001030
PTEC 00000002)
[12:51:23] ACPI: Local APIC address 0xfee00000
[12:51:23] No NUMA configuration found
[12:51:23] Faking a node at [mem 0x0000000000000000-0x000000043e7fffff]
[12:51:23] NODE_DATA(0) allocated [mem 0x43e7fb000-0x43e7fffff]
[12:51:23] Zone ranges:
[12:51:23] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[12:51:23] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[12:51:23] Normal [mem 0x0000000100000000-0x000000043e7fffff]
[12:51:23] Device empty
[12:51:23] Movable zone start for each node
[12:51:23] Early memory node ranges
[12:51:23] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[12:51:23] node 0: [mem 0x0000000000059000-0x000000000008bfff]
[12:51:23] node 0: [mem 0x0000000000100000-0x00000000aff9bfff]
[12:51:23] node 0: [mem 0x00000000affc7000-0x00000000b98c9fff]
[12:51:23] node 0: [mem 0x00000000bb4ff000-0x00000000bb4fffff]
[12:51:23] node 0: [mem 0x0000000100000000-0x000000043e7fffff]
[12:51:23] Reserved but unavailable: 100 pages
[12:51:23] Initmem setup node 0 [mem 0x0000000000001000-0x000000043e7fffff]
[12:51:23] On node 0 totalpages: 4161578
[12:51:23] DMA zone: 64 pages used for memmap
[12:51:23] DMA zone: 72 pages reserved
[12:51:23] DMA zone: 3978 pages, LIFO batch:0
[12:51:23] DMA32 zone: 11811 pages used for memmap
[12:51:23] DMA32 zone: 755872 pages, LIFO batch:63
[12:51:23] Normal zone: 53152 pages used for memmap
[12:51:23] Normal zone: 3401728 pages, LIFO batch:63
[12:51:23] Reserving Intel graphics memory at [mem 0xbd800000-0xbf7fffff]
[12:51:23] ACPI: PM-Timer IO Port: 0x1808
[12:51:23] ACPI: Local APIC address 0xfee00000
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[12:51:23] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[12:51:23] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[12:51:23] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[12:51:23] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[12:51:23] ACPI: IRQ0 used by override.
[12:51:23] ACPI: IRQ9 used by override.
[12:51:23] Using ACPI (MADT) for SMP configuration information
[12:51:23] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[12:51:23] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[12:51:23] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[12:51:23] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[12:51:23] PM: Registered nosave memory: [mem 0x0008c000-0x000fffff]
[12:51:23] PM: Registered nosave memory: [mem 0xaff9c000-0xaff9cfff]
[12:51:23] PM: Registered nosave memory: [mem 0xaff9d000-0xaffc6fff]
[12:51:23] PM: Registered nosave memory: [mem 0xb98ca000-0xb9907fff]
[12:51:23] PM: Registered nosave memory: [mem 0xb9908000-0xbb47bfff]
[12:51:23] PM: Registered nosave memory: [mem 0xbb47c000-0xbb4cbfff]
[12:51:23] PM: Registered nosave memory: [mem 0xbb4cc000-0xbb4fefff]
[12:51:23] PM: Registered nosave memory: [mem 0xbb500000-0xbf7fffff]
[12:51:23] PM: Registered nosave memory: [mem 0xbf800000-0xf80f9fff]
[12:51:23] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[12:51:23] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[12:51:23] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[12:51:23] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[12:51:23] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[12:51:23] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[12:51:23] [mem 0xbf800000-0xf80f9fff] available for PCI devices
[12:51:23] Booting paravirtualized kernel on bare hardware
[12:51:23] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[12:51:23] random: get_random_bytes called from start_kernel+0x93/0x537 with
crng_init=0
[12:51:23] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[12:51:23] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840
u524288
[12:51:23] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
[12:51:23] pcpu-alloc: [0] 0 1 2 3
[12:51:23] Built 1 zonelists, mobility grouping on. Total pages: 4096479
[12:51:23] Policy zone: Normal
[12:51:23] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64
root=/dev/mapper/name-vg-root ro quiet intel_iommu=igfx_off
[12:51:23] DMAR: Disable GFX device mapping
[12:51:23] Calgary: detecting Calgary via BIOS EBDA area
[12:51:23] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[12:51:23] Memory: 16170296K/16646312K available (10252K kernel code, 1236K
rwdata, 3192K rodata, 1572K init, 2332K bss, 476016K reserved, 0K cma-reserved)
[12:51:23] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[12:51:23] Kernel/User page tables isolation: enabled
[12:51:23] ftrace: allocating 31610 entries in 124 pages
[12:51:23] rcu: Hierarchical RCU implementation.
[12:51:23] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[12:51:23] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[12:51:23] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[12:51:23] Console: colour dummy device 80x25
[12:51:23] console [tty0] enabled
[12:51:23] ACPI: Core revision 20180810
[12:51:23] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635855245 ns
[12:51:23] hpet clockevent registered
[12:51:23] APIC: Switch to symmetric I/O mode setup
[12:51:23] DMAR: Host address width 39
[12:51:23] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[12:51:23] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap
7e3ff0505e
[12:51:23] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[12:51:23] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap
f050da
[12:51:23] DMAR: RMRR base: 0x000000bb42b000 end: 0x000000bb44afff
[12:51:23] DMAR: RMRR base: 0x000000bd000000 end: 0x000000bf7fffff
[12:51:23] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[12:51:23] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[12:51:23] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[12:51:23] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS
setting.
[12:51:23] DMAR-IR: Enabled IRQ remapping in xapic mode
[12:51:23] x2apic: IRQ remapping doesn't support X2APIC mode
[12:51:23] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[12:51:23] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x22983777dd9, max_idle_ns: 440795300422 ns
[12:51:23] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4800.00 BogoMIPS (lpj=9600000)
[12:51:23] pid_max: default: 32768 minimum: 301
[12:51:23] Security Framework initialized
[12:51:23] Yama: disabled by default; enable with sysctl kernel.yama.*
[12:51:23] AppArmor: AppArmor initialized
[12:51:23] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[12:51:23] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[12:51:23] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[12:51:23] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[12:51:23] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[12:51:23] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[12:51:23] mce: CPU supports 8 MCE banks
[12:51:23] CPU0: Thermal monitoring enabled (TM1)
[12:51:23] process: using mwait in idle threads
[12:51:23] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[12:51:23] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[12:51:23] Spectre V2 : Mitigation: Full generic retpoline
[12:51:23] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[12:51:23] Spectre V2 : Enabling Restricted Speculation for firmware calls
[12:51:23] Spectre V2 : mitigation: Enabling conditional Indirect Branch
Prediction Barrier
[12:51:23] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[12:51:23] Speculative Store Bypass: Mitigation: Speculative Store Bypass
disabled via prctl and seccomp
[12:51:23] Freeing SMP alternatives memory: 24K
[12:51:23] TSC deadline timer enabled
[12:51:23] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family:
0x6, model: 0x4e, stepping: 0x3)
[12:51:23] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-
width counters, Intel PMU driver.
[12:51:23] ... version: 4
[12:51:23] ... bit width: 48
[12:51:23] ... generic registers: 4
[12:51:23] ... value mask: 0000ffffffffffff
[12:51:23] ... max period: 00007fffffffffff
[12:51:23] ... fixed-purpose events: 3
[12:51:23] ... event mask: 000000070000000f
[12:51:23] rcu: Hierarchical SRCU implementation.
[12:51:23] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[12:51:23] smp: Bringing up secondary CPUs ...
[12:51:23] x86: Booting SMP configuration:
[12:51:23] .... node #0, CPUs: #1 #2 #3
[12:51:23] smp: Brought up 1 node, 4 CPUs
[12:51:23] smpboot: Max logical packages: 1
[12:51:23] smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
[12:51:23] devtmpfs: initialized
[12:51:23] x86/mm: Memory block size: 128MB
[12:51:23] PM: Registering ACPI NVS region [mem 0xaff9c000-0xaff9cfff] (4096
bytes)
[12:51:23] PM: Registering ACPI NVS region [mem 0xbb47c000-0xbb4cbfff] (327680
bytes)
[12:51:23] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[12:51:23] futex hash table entries: 1024 (order: 4, 65536 bytes)
[12:51:23] pinctrl core: initialized pinctrl subsystem
[12:51:23] NET: Registered protocol family 16
[12:51:23] audit: initializing netlink subsys (disabled)
[12:51:23] audit: type=2000 audit(1546343483.048:1): state=initialized
audit_enabled=0 res=1
[12:51:23] cpuidle: using governor ladder
[12:51:23] cpuidle: using governor menu
[12:51:23] Simple Boot Flag at 0x47 set to 0x1
[12:51:23] ACPI: bus type PCI registered
[12:51:23] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[12:51:23] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[12:51:23] PCI: not using MMCONFIG
[12:51:23] PCI: Using configuration type 1 for base access
[12:51:23] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[12:51:23] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[12:51:23] ACPI: Added _OSI(Module Device)
[12:51:23] ACPI: Added _OSI(Processor Device)
[12:51:23] ACPI: Added _OSI(3.0 _SCP Extensions)
[12:51:23] ACPI: Added _OSI(Processor Aggregator Device)
[12:51:23] ACPI: Added _OSI(Linux-Dell-Video)
[12:51:23] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[12:51:23] ACPI: EC: EC started
[12:51:23] ACPI: EC: interrupt blocked
[12:51:23] ACPI: \: Used as first EC
[12:51:23] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[12:51:23] ACPI: \: Used as boot ECDT EC to handle transactions
[12:51:23] ACPI: 7 ACPI AML tables successfully acquired and loaded
[12:51:23] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B892800 00068B (v02 PmRef Cpu0Ist 00003000
INTL 20141107)
[12:51:23] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B8F6C00 0003CF (v02 PmRef Cpu0Cst 00003001
INTL 20141107)
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B9360C0 00008E (v02 PmRef Cpu0Hwp 00003000
INTL 20141107)
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B945000 000130 (v02 PmRef HwpLvt 00003000
INTL 20141107)
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B894000 0005AA (v02 PmRef ApIst 00003000
INTL 20141107)
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B944000 000119 (v02 PmRef ApHwp 00003000
INTL 20141107)
[12:51:23] ACPI: Dynamic OEM Table Load:
[12:51:23] ACPI: SSDT 0xFFFF91572B944800 000119 (v02 PmRef ApCst 00003000
INTL 20141107)
[12:51:23] ACPI: Interpreter enabled
[12:51:23] ACPI: (supports S0 S3 S4 S5)
[12:51:23] ACPI: Using IOAPIC for interrupt routing
[12:51:23] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[12:51:23] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI
motherboard resources
[12:51:23] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[12:51:23] ACPI: Enabled 5 GPEs in block 00 to 7F
[12:51:23] ACPI: Power Resource [PUBS] (on)
[12:51:23] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[12:51:23] ACPI: Power Resource [PG00] (on)
[12:51:23] ACPI: Power Resource [PG01] (on)
[12:51:23] ACPI: Power Resource [PG02] (on)
[12:51:23] ACPI: Power Resource [WRST] (off)
[12:51:23] ACPI: Power Resource [WRST] (off)
[12:51:23] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[12:51:23] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[12:51:23] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[12:51:23] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug
PCIeCapability LTR]
[12:51:23] acpi PNP0A08:00: _OSC: not requesting control; platform does not
support [PCIeCapability]
[12:51:23] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER
PCIeCapability LTR]
[12:51:23] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME
AER]
[12:51:23] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[12:51:23] PCI host bridge to bus 0000:00
[12:51:23] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[12:51:23] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[12:51:23] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[12:51:23] pci_bus 0000:00: root bus resource [mem 0xbf800000-0xfebfffff
window]
[12:51:23] pci_bus 0000:00: root bus resource [bus 00-3f]
[12:51:23] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[12:51:23] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[12:51:23] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[12:51:23] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
[12:51:23] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
[12:51:23] pci 0000:00:02.0: BAR 2: assigned to efifb
[12:51:23] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[12:51:23] pci 0000:00:08.0: reg 0x10: [mem 0xe124a000-0xe124afff 64bit]
[12:51:23] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[12:51:23] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
[12:51:23] pci 0000:00:14.0: PME# supported from D3hot D3cold
[12:51:23] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[12:51:23] pci 0000:00:14.2: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit]
[12:51:23] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[12:51:23] pci 0000:00:16.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit]
[12:51:23] pci 0000:00:16.0: PME# supported from D3hot
[12:51:23] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[12:51:23] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff]
[12:51:23] pci 0000:00:17.0: reg 0x14: [mem 0xe124f000-0xe124f0ff]
[12:51:23] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087]
[12:51:23] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b]
[12:51:23] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f]
[12:51:23] pci 0000:00:17.0: reg 0x24: [mem 0xe124d000-0xe124d7ff]
[12:51:23] pci 0000:00:17.0: PME# supported from D3hot
[12:51:23] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[12:51:23] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[12:51:23] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[12:51:23] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[12:51:23] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[12:51:23] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[12:51:23] pci 0000:00:1f.2: reg 0x10: [mem 0xe1244000-0xe1247fff]
[12:51:23] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[12:51:23] pci 0000:00:1f.3: reg 0x10: [mem 0xe1240000-0xe1243fff 64bit]
[12:51:23] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit]
[12:51:23] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[12:51:23] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[12:51:23] pci 0000:00:1f.4: reg 0x10: [mem 0xe124e000-0xe124e0ff 64bit]
[12:51:23] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[12:51:23] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
[12:51:23] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff]
[12:51:23] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[12:51:23] pci 0000:02:00.0: [10ec:522a] type 00 class 0xff0000
[12:51:23] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1100fff]
[12:51:23] pci 0000:02:00.0: supports D1 D2
[12:51:23] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[12:51:23] pci 0000:00:1c.0: PCI bridge to [bus 02]
[12:51:23] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
[12:51:23] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
[12:51:23] pci 0000:04:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit]
[12:51:23] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[12:51:23] pci 0000:00:1c.2: PCI bridge to [bus 04]
[12:51:23] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe10fffff]
[12:51:23] ACPI: EC: interrupt unblocked
[12:51:23] ACPI: EC: event unblocked
[12:51:23] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[12:51:23] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle
transactions and events
[12:51:23] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[12:51:23] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[12:51:23] pci 0000:00:02.0: vgaarb: bridge control possible
[12:51:23] vgaarb: loaded
[12:51:23] pps_core: LinuxPPS API ver. 1 registered
[12:51:23] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[12:51:23] PTP clock support registered
[12:51:23] EDAC MC: Ver: 3.0.0
[12:51:23] Registered efivars operations
[12:51:23] PCI: Using ACPI for IRQ routing
[12:51:23] PCI: pci_cache_line_size set to 64 bytes
[12:51:23] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[12:51:23] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[12:51:23] e820: reserve RAM buffer [mem 0xaff9c000-0xafffffff]
[12:51:23] e820: reserve RAM buffer [mem 0xb98ca000-0xbbffffff]
[12:51:23] e820: reserve RAM buffer [mem 0xbb500000-0xbbffffff]
[12:51:23] e820: reserve RAM buffer [mem 0x43e800000-0x43fffffff]
[12:51:23] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[12:51:23] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[12:51:23] clocksource: Switched to clocksource tsc-early
[12:51:23] VFS: Disk quotas dquot_6.6.0
[12:51:23] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[12:51:23] AppArmor: AppArmor Filesystem Enabled
[12:51:23] pnp: PnP ACPI init
[12:51:23] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[12:51:23] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[12:51:23] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[12:51:23] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[12:51:23] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[12:51:23] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[12:51:23] system 00:00: [mem 0x000d4000-0x000d7fff] could not be reserved
[12:51:23] system 00:00: [mem 0x000d8000-0x000dbfff] could not be reserved
[12:51:23] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[12:51:23] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[12:51:23] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[12:51:23] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[12:51:23] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[12:51:23] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[12:51:23] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
[12:51:23] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[12:51:23] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[12:51:23] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[12:51:23] system 00:01: [io 0x1800-0x189f] has been reserved
[12:51:23] system 00:01: [io 0x0800-0x087f] has been reserved
[12:51:23] system 00:01: [io 0x0880-0x08ff] has been reserved
[12:51:23] system 00:01: [io 0x0900-0x097f] has been reserved
[12:51:23] system 00:01: [io 0x0980-0x09ff] has been reserved
[12:51:23] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[12:51:23] system 00:01: [io 0x0a80-0x0aff] has been reserved
[12:51:23] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[12:51:23] system 00:01: [io 0x0b80-0x0bff] has been reserved
[12:51:23] system 00:01: [io 0x15e0-0x15ef] has been reserved
[12:51:23] system 00:01: [io 0x1600-0x167f] has been reserved
[12:51:23] system 00:01: [io 0x1640-0x165f] has been reserved
[12:51:23] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[12:51:23] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[12:51:23] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[12:51:23] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[12:51:23] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[12:51:23] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[12:51:23] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved
[12:51:23] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[12:51:23] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[12:51:23] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[12:51:23] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[12:51:23] pnp 00:04: Plug and Play ACPI device, IDs LEN005e PNP0f13 (active)
[12:51:23] system 00:05: [io 0x1854-0x1857] has been reserved
[12:51:23] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[12:51:23] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[12:51:23] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[12:51:23] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[12:51:23] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[12:51:23] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[12:51:23] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[12:51:23] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[12:51:23] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[12:51:23] system 00:07: [io 0xff00-0xfffe] has been reserved
[12:51:23] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[12:51:23] pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
[12:51:23] pnp: PnP ACPI: found 9 devices
[12:51:23] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[12:51:23] pci 0000:00:1c.0: PCI bridge to [bus 02]
[12:51:23] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
[12:51:23] pci 0000:00:1c.2: PCI bridge to [bus 04]
[12:51:23] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe10fffff]
[12:51:23] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[12:51:23] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[12:51:23] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[12:51:23] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfebfffff window]
[12:51:23] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
[12:51:23] pci_bus 0000:04: resource 1 [mem 0xe1000000-0xe10fffff]
[12:51:23] NET: Registered protocol family 2
[12:51:23] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072
bytes)
[12:51:23] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[12:51:23] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[12:51:23] TCP: Hash tables configured (established 131072 bind 65536)
[12:51:23] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[12:51:23] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[12:51:23] NET: Registered protocol family 1
[12:51:23] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[12:51:23] PCI: CLS 0 bytes, default 64
[12:51:23] Unpacking initramfs...
[12:51:23] Freeing initrd memory: 29284K
[12:51:23] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[12:51:23] software IO TLB: mapped [mem 0xaa3d8000-0xae3d8000] (64MB)
[12:51:23] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x22983777dd9, max_idle_ns: 440795300422 ns
[12:51:23] clocksource: Switched to clocksource tsc
[12:51:23] Initialise system trusted keyrings
[12:51:23] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[12:51:23] zbud: loaded
[12:51:23] pstore: using deflate compression
[12:51:24] Key type asymmetric registered
[12:51:24] Asymmetric key parser 'x509' registered
[12:51:24] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[12:51:24] io scheduler noop registered
[12:51:24] io scheduler deadline registered
[12:51:24] io scheduler cfq registered (default)
[12:51:24] io scheduler mq-deadline registered
[12:51:24] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[12:51:24] efifb: probing for efifb
[12:51:24] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[12:51:24] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[12:51:24] efifb: scrolling: redraw
[12:51:24] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[12:51:24] Console: switching to colour frame buffer device 240x67
[12:51:24] fb0: EFI VGA frame buffer device
[12:51:24] intel_idle: MWAIT substates: 0x11142120
[12:51:24] intel_idle: v0.4.1 model 0x4E
[12:51:24] intel_idle: lapic_timer_reliable_states 0xffffffff
[12:51:24] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[12:51:24] Linux agpgart interface v0.103
[12:51:24] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[12:51:24] AMD IOMMUv2 functionality not available on this system
[12:51:24] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64
irq 1,12
[12:51:24] serio: i8042 KBD port at 0x60,0x64 irq 1
[12:51:24] serio: i8042 AUX port at 0x60,0x64 irq 12
[12:51:24] mousedev: PS/2 mouse device common for all mice
[12:51:24] rtc_cmos 00:02: RTC can wake from S4
[12:51:24] rtc_cmos 00:02: registered as rtc0
[12:51:24] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet
irqs
[12:51:24] intel_pstate: Intel P-state driver initializing
[12:51:24] intel_pstate: HWP enabled
[12:51:24] ledtrig-cpu: registered to indicate activity on CPUs
[12:51:24] NET: Registered protocol family 10
[12:51:24] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[12:51:24] Segment Routing with IPv6
[12:51:24] mip6: Mobile IPv6
[12:51:24] NET: Registered protocol family 17
[12:51:24] mpls_gso: MPLS GSO support
[12:51:24] microcode: sig=0x406e3, pf=0x80, revision=0xc6
[12:51:24] microcode: Microcode Update Driver: v2.2.
[12:51:24] sched_clock: Marking stable (1163405392, -3568823)->(1164305404,
-4468835)
[12:51:24] registered taskstats version 1
[12:51:24] Loading compiled-in X.509 certificates
[12:51:24] Loaded X.509 cert 'secure-boot-test-key-lfaraone:
97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[12:51:24] zswap: loaded using pool lzo/zbud
[12:51:24] AppArmor: AppArmor sha1 policy hashing enabled
[12:51:24] rtc_cmos 00:02: setting system clock to 2019-01-01 11:51:24 UTC
(1546343484)
[12:51:24] Freeing unused kernel image memory: 1572K
[12:51:24] Write protecting the kernel read-only data: 16384k
[12:51:24] Freeing unused kernel image memory: 2028K
[12:51:24] Freeing unused kernel image memory: 904K
[12:51:24] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[12:51:24] x86/mm: Checking user space page tables
[12:51:24] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[12:51:24] Run /init as init process
[12:51:24] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[12:51:24] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[12:51:24] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[12:51:24] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[12:51:24] thermal LNXTHERM:00: registered as thermal_zone0
[12:51:24] ACPI: Thermal Zone [THM0] (38 C)
[12:51:24] ACPI: bus type USB registered
[12:51:24] usbcore: registered new interface driver usbfs
[12:51:24] usbcore: registered new interface driver hub
[12:51:24] usbcore: registered new device driver usb
[12:51:24] SCSI subsystem initialized
[12:51:24] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[12:51:24] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[12:51:24] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[12:51:24] libata version 3.00 loaded.
[12:51:24] cryptd: max_cpu_qlen set to 1000
[12:51:24] xhci_hcd 0000:00:14.0: xHCI Host Controller
[12:51:24] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[12:51:24] ahci 0000:00:17.0: version 3.0
[12:51:24] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl
SATA mode
[12:51:24] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part
deso sadm sds apst
[12:51:24] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x0000000001109810
[12:51:24] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[12:51:24] AVX2 version of gcm_enc/dec engaged.
[12:51:24] AES CTR mode by8 optimization enabled
[12:51:24] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.19
[12:51:24] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[12:51:24] usb usb1: Product: xHCI Host Controller
[12:51:24] usb usb1: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[12:51:24] usb usb1: SerialNumber: 0000:00:14.0
[12:51:24] hub 1-0:1.0: USB hub found
[12:51:24] hub 1-0:1.0: 12 ports detected
[12:51:24] scsi host0: ahci
[12:51:24] xhci_hcd 0000:00:14.0: xHCI Host Controller
[12:51:24] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[12:51:24] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[12:51:24] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 4.19
[12:51:24] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[12:51:24] usb usb2: Product: xHCI Host Controller
[12:51:24] usb usb2: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[12:51:24] usb usb2: SerialNumber: 0000:00:14.0
[12:51:24] hub 2-0:1.0: USB hub found
[12:51:24] hub 2-0:1.0: 6 ports detected
[12:51:24] usb: port power management may be unreliable
[12:51:24] scsi host1: ahci
[12:51:24] ata1: DUMMY
[12:51:24] ata2: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d180 irq
124
[12:51:24] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[12:51:24] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC
clock
[12:51:24] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1)
54:ee:75:99:48:f6
[12:51:24] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[12:51:24] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[12:51:24] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12:51:24] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[12:51:24] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[12:51:24] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[12:51:24] ata2.00: supports DRM functions and may not be fully accessible
[12:51:24] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[12:51:24] ata2.00: disabling queued TRIM support
[12:51:24] ata2.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133
[12:51:24] ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
[12:51:24] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[12:51:24] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[12:51:24] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[12:51:24] ata2.00: supports DRM functions and may not be fully accessible
[12:51:24] ata2.00: disabling queued TRIM support
[12:51:24] ata2.00: configured for UDMA/133
[12:51:24] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0
ANSI: 5
[12:51:24] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477
GiB)
[12:51:24] sd 1:0:0:0: [sda] Write Protect is off
[12:51:24] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[12:51:24] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
[12:51:24] sda: sda1 sda2 sda3
[12:51:24] sd 1:0:0:0: [sda] supports TCG Opal
[12:51:24] sd 1:0:0:0: [sda] Attached SCSI disk
[12:51:25] random: lvm: uninitialized urandom read (4 bytes read)
[12:51:25] random: lvm: uninitialized urandom read (4 bytes read)
[12:51:25] device-mapper: uevent: version 1.0.3
[12:51:25] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-
[email protected]
[12:51:25] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b,
bcdDevice= 0.01
[12:51:25] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[12:51:25] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[12:51:25] usb 1-8: New USB device found, idVendor=5986, idProduct=0706,
bcdDevice= 0.12
[12:51:25] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12:51:25] usb 1-8: Product: Integrated Camera
[12:51:25] usb 1-8: Manufacturer: SunplusIT Inc
[12:51:25] psmouse serio1: synaptics: queried max coordinates: x [..5676], y
[..4758]
[12:51:25] psmouse serio1: synaptics: queried min coordinates: x [1266..], y
[1096..]
[12:51:25] psmouse serio1: synaptics: The touchpad can support a better bus
than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and
RMI4_SMB are enabled to get a better touchpad experience.
[12:51:25] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560
[12:51:25] psmouse serio1: synaptics: serio: Synaptics pass-through port at
isa0060/serio1/input0
[12:51:25] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input2
[12:51:25] random: fast init done
[12:51:26] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons:
3/3
[12:51:26] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input3
[12:51:29] random: crng init done
[12:51:37] NET: Registered protocol family 38
[12:51:37] PM: Image not found (code -22)
[12:51:37] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
(null)
[12:51:38] systemd[1]: Inserted module 'autofs4'
[12:51:38] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-
hierarchy=hybrid)
[12:51:38] systemd[1]: Detected architecture x86-64.
[12:51:38] systemd[1]: Set hostname to <name>.
[12:51:38] systemd[1]: /lib/systemd/system/[email protected]:9: PIDFile=
references path below legacy directory /var/run/, updating /var/run/tor/tor.pid
→ /run/tor/tor.pid; please update the unit file accordingly.
[12:51:38] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references
path below legacy directory /var/run/, updating /var/run/samba/smbd.pid →
/run/samba/smbd.pid; please update the unit file accordingly.
[12:51:38] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references
path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid →
/run/samba/nmbd.pid; please update the unit file accordingly.
[12:51:38] systemd[1]: /lib/systemd/system/minissdpd.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/minissdpd.pid → /run/minissdpd.pid; please update the unit file
accordingly.
[12:51:38] systemd[1]: Listening on LVM2 metadata daemon socket.
[12:51:38] systemd[1]: Listening on udev Kernel Socket.
[12:51:38] systemd[1]: Listening on RPCbind Server Activation Socket.
[12:51:38] lp: driver loaded but no devices found
[12:51:38] ppdev: user-space parallel port driver
[12:51:38] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[12:51:38] RPC: Registered named UNIX socket transport module.
[12:51:38] RPC: Registered udp transport module.
[12:51:38] RPC: Registered tcp transport module.
[12:51:38] RPC: Registered tcp NFSv4.1 backchannel transport module.
[12:51:38] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[12:51:38] ACPI: Lid Switch [LID]
[12:51:38] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[12:51:38] ACPI: Sleep Button [SLPB]
[12:51:38] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[12:51:38] ACPI: Power Button [PWRF]
[12:51:38] ACPI: AC Adapter [AC] (on-line)
[12:51:38] battery: ACPI: Battery Slot [BAT0] (battery present)
[12:51:38] acpi PNP0C14:01: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[12:51:38] acpi PNP0C14:02: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[12:51:38] iTCO_vendor_support: vendor-support=0
[12:51:38] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[12:51:38] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[12:51:38] battery: ACPI: Battery Slot [BAT1] (battery present)
[12:51:38] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[12:51:38] tpm_tis 00:08: 1.2 TPM (device-id 0x1B, rev-id 16)
[12:51:38] Non-volatile memory driver v1.3
[12:51:38] EFI Variables Facility v0.08 2004-May-17
[12:51:38] sd 1:0:0:0: Attached scsi generic sg0 type 0
[12:51:38] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[12:51:38] thinkpad_acpi: http://ibm-acpi.sf.net/
[12:51:38] thinkpad_acpi: ThinkPad BIOS N1KET16W (1.03 ), EC unknown
[12:51:38] thinkpad_acpi: Lenovo ThinkPad T560, model 20FJS03700
[12:51:38] input: PC Speaker as /devices/platform/pcspkr/input/input7
[12:51:38] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[12:51:38] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl
timer
[12:51:38] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[12:51:38] RAPL PMU: hw unit of domain package 2^-14 Joules
[12:51:38] RAPL PMU: hw unit of domain dram 2^-14 Joules
[12:51:38] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[12:51:38] RAPL PMU: hw unit of domain psys 2^-14 Joules
[12:51:38] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which
spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[12:51:38] caller snb_uncore_imc_init_box+0x6c/0xb0 [intel_uncore] mapping
multiple BARs
[12:51:38] thinkpad_acpi: radio switch found; radios are enabled
[12:51:38] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness
control, supported by the ACPI video driver
[12:51:38] thinkpad_acpi: Disabling thinkpad-acpi brightness events by
default...
[12:51:38] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[12:51:38] thinkpad_acpi: Standard ACPI backlight interface available, not
loading native one
[12:51:38] thinkpad_acpi: battery 2 registered (start 75, stop 80)
[12:51:38] thinkpad_acpi: battery 1 registered (start 70, stop 75)
[12:51:38] battery: new extension: ThinkPad Battery Extension
[12:51:38] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input8
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: crypto_comp_decompress failed, ret = -22!
[12:51:38] pstore: decompression failed: -22
[12:51:38] pstore: Registered efi as persistent store backend
[12:51:38] Intel(R) Wireless WiFi driver for Linux
[12:51:38] Copyright(c) 2003- 2015 Intel Corporation
[12:51:38] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[12:51:38] iwlwifi 0000:04:00.0: firmware: direct-loading firmware
iwlwifi-8000C-36.ucode
[12:51:38] iwlwifi 0000:04:00.0: loaded firmware version 36.e91976c0.0 op_mode
iwlmvm
[12:51:38] intel_rapl: Found RAPL domain package
[12:51:38] intel_rapl: Found RAPL domain core
[12:51:38] intel_rapl: Found RAPL domain uncore
[12:51:38] intel_rapl: Found RAPL domain dram
[12:51:38] Adding 33288188k swap on /dev/mapper/name-vg-swap. Priority:-2
extents:1 across:33288188k SSFS
[12:51:38] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260,
REV=0x208
[12:51:38] checking generic (c0000000 7f0000) vs hw (c0000000 20000000)
[12:51:38] fb: switching to inteldrmfb from EFI VGA
[12:51:38] Console: switching to colour dummy device 80x25
[12:51:39] [drm] Replacing VGA console driver
[12:51:39] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[12:51:39] [drm] Driver supports precise vblank timestamp query.
[12:51:39] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[12:51:39] i915 0000:00:02.0: firmware: direct-loading firmware
i915/skl_dmc_ver1_27.bin
[12:51:39] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[12:51:39] iwlwifi 0000:04:00.0: base HW address: 44:85:00:27:a5:79
[12:51:39] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[12:51:39] thermal thermal_zone3: failed to read out thermal zone (-61)
[12:51:39] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[12:51:39] systemd-journald[327]: Received request to flush runtime journal
from PID 1
[12:51:39] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[12:51:39] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[12:51:39] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[12:51:39] audit: type=1400 audit(1546343499.588:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=653 comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.592:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=654
comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.592:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi"
pid=651 comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.592:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-
akonadi///usr/sbin/mysqld" pid=651 comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.592:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=655 comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.596:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-
pdf" pid=652 comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.596:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=652
comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.596:9): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/sbin/cupsd//third_party" pid=652 comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.596:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=656
comm="apparmor_parser"
[12:51:39] audit: type=1400 audit(1546343499.596:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=656
comm="apparmor_parser"
[12:51:39] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[12:51:39] Bluetooth: Core ver 2.22
[12:51:39] NET: Registered protocol family 31
[12:51:39] Bluetooth: HCI device and connection manager initialized
[12:51:39] Bluetooth: HCI socket layer initialized
[12:51:39] Bluetooth: L2CAP socket layer initialized
[12:51:39] Bluetooth: SCO socket layer initialized
[12:51:39] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[12:51:39] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[12:51:39] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[12:51:39] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[12:51:39] fbcon: inteldrmfb (fb0) is primary device
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2
(0x16/0x15/0x0/0x0/0x0)
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: inputs:
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
[12:51:39] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[12:51:39] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[12:51:39] input: HDA Intel PCH Dock Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[12:51:39] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[12:51:39] input: HDA Intel PCH Dock Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[12:51:39] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[12:51:39] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[12:51:39] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[12:51:39] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[12:51:39] input: HDA Intel PCH HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[12:51:39] input: HDA Intel PCH HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[12:51:40] media: Linux media interface: v0.10
[12:51:40] videodev: Linux video capture interface: v2.00
[12:51:40] usbcore: registered new interface driver btusb
[12:51:40] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[12:51:40] Bluetooth: hci0: Device revision is 5
[12:51:40] Bluetooth: hci0: Secure boot is enabled
[12:51:40] Bluetooth: hci0: OTP lock is enabled
[12:51:40] Bluetooth: hci0: API lock is enabled
[12:51:40] Bluetooth: hci0: Debug lock is disabled
[12:51:40] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[12:51:40] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[12:51:40] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[12:51:40] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0706)
[12:51:40] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not
initialized!
[12:51:40] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not
initialized!
[12:51:40] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not
initialized!
[12:51:40] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not
initialized!
[12:51:40] input: Integrated Camera: Integrated C as
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input20
[12:51:40] usbcore: registered new interface driver uvcvideo
[12:51:40] USB Video Class driver (1.1.1)
[12:51:41] Console: switching to colour frame buffer device 240x67
[12:51:41] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[12:51:41] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[12:51:41] Bluetooth: BNEP filters: protocol multicast
[12:51:41] Bluetooth: BNEP socket layer initialized
[12:51:41] L1TF CPU bug present and SMT on, data leak possible. See
CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/l1tf.html
for details.
[12:51:41] Bluetooth: hci0: Waiting for firmware download to complete
[12:51:41] Bluetooth: hci0: Firmware loaded in 1632952 usecs
[12:51:41] Bluetooth: hci0: Waiting for device to boot
[12:51:41] Bluetooth: hci0: Device booted in 11673 usecs
[12:51:41] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[12:51:41] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[12:51:41] Bluetooth: hci0: Applying Intel DDC parameters completed
[12:51:41] Bluetooth: RFCOMM TTY layer initialized
[12:51:41] Bluetooth: RFCOMM socket layer initialized
[12:51:41] Bluetooth: RFCOMM ver 1.11
[12:52:04] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[12:52:04] vboxdrv: loading out-of-tree module taints kernel.
[12:52:04] vboxdrv: module verification failed: signature and/or required key
missing - tainting kernel
[12:52:04] vboxdrv: Found 4 processor cores
[12:52:04] vboxdrv: TSC mode is Invariant, tentative frequency 2399998395 Hz
[12:52:04] vboxdrv: Successfully loaded version 5.2.22_Debian (interface
0x00290001)
[12:52:04] VBoxNetFlt: Successfully started.
[12:52:04] VBoxNetAdp: Successfully started.
[12:52:04] VBoxPciLinuxInit
[12:52:04] vboxpci: IOMMU not found (not registered)
[12:52:04] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[12:52:04] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12:53:16] fuse init (API version 7.27)
[12:53:35] usb 1-7: USB disconnect, device number 2
[12:54:08] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12:54:08] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12:54:11] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12:54:40] wlan0: authenticate with bc:05:43:10:67:75
[12:54:40] wlan0: send auth to bc:05:43:10:67:75 (try 1/3)
[12:54:40] wlan0: authenticated
[12:54:40] wlan0: associate with bc:05:43:10:67:75 (try 1/3)
[12:54:40] wlan0: RX AssocResp from bc:05:43:10:67:75 (capab=0x411 status=0
aid=4)
[12:54:40] wlan0: associated
[12:54:40] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by
bc:05:43:10:67:75
[12:54:40] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[12:54:51] show_signal_msg: 27 callbacks suppressed
[12:54:51] baloo_file_extr[2787]: segfault at 557db49eb9c0 ip 00007f2dc3164d74
sp 00007ffdf9080a98 error 4 in libc-2.28.so[7f2dc302a000+148000]
[12:54:51] Code: fe 7f 71 e0 c5 fe 7f 79 c0 c5 7e 7f 41 a0 c4 c1 7e 7f 23 c5 f8
77 c3 c5 fe 6f 26 c5 fe 6f 6e 20 c5 fe 6f 76 40 c5 fe 6f 7e 60 <c5> 7e 6f 44 16
e0 4c 8d 5c 17 e0 48 8d 4c 16 e0 4d 89 d9 4d 89 d8
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages baloo-kf5 depends on:
ii kio 5.51.0-1
ii libc6 2.28-2
ii libkf5baloo5 5.51.0-1
ii libkf5balooengine5 5.51.0-1
ii libkf5configcore5 5.51.0-1
ii libkf5coreaddons5 5.51.0-1
ii libkf5crash5 5.51.0-1
ii libkf5dbusaddons5 5.51.0-1
ii libkf5filemetadata3 5.51.0-1
ii libkf5i18n5 5.51.0-1
ii libkf5idletime5 5.51.0-1
ii libkf5kiocore5 5.51.0-1
ii libkf5solid5 5.51.0-3
ii libqt5core5a 5.11.2+dfsg-7
ii libqt5dbus5 5.11.2+dfsg-7
ii libqt5gui5 5.11.2+dfsg-7
ii libqt5qml5 5.11.2-3
ii libqt5widgets5 5.11.2+dfsg-7
ii libstdc++6 8.2.0-13
baloo-kf5 recommends no packages.
baloo-kf5 suggests no packages.
-- no debconf information
--- End Message ---
