Your message dated Mon, 06 Jul 2026 21:19:49 +0000
with message-id <[email protected]>
and subject line Bug#1139512: fixed in linux-gpib-user 4.3.7-6
has caused the Debian Bug report #1139512,
regarding linux-gpib-user: FTBFS: LaTeX error
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1139512: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1139512
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux-gpib-user
Version: 4.3.7-5
Severity: serious
Tags: ftbfs forky sid
Dear maintainer:
During a rebuild of all packages in unstable, this package failed to build.
Below you will find the last part of the build log (probably the most
relevant part, but not necessarily). If required, the full build log
is available here:
https://people.debian.org/~sanvila/build-logs/202606/
About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.
If you cannot reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.
If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:linux-gpib-user, so that this is still
visible in the BTS web page for this package.
Thanks.
--------------------------------------------------------------------------------
[...]
debian/rules clean
dh clean
debian/rules execute_after_dh_auto_clean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_clean --buildsystem=pybuild --sourcedirectory=language/python
touch ChangeLog
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: no obvious need to run autopoint
[... snipped ...]
Note: Writing man/man3/FindRQS.3
Note: Writing man/man3/PassControl.3
Note: Writing man/man3/PPoll.3
Note: Writing man/man3/PPollConfig.3
Note: Writing man/man3/PPollUnconfig.3
Note: Writing man/man3/RcvRespMsg.3
Note: Writing man/man3/ReadStatusByte.3
Note: Writing man/man3/Receive.3
Note: Writing man/man3/ReceiveSetup.3
Note: Writing man/man3/ResetSys.3
Note: Writing man/man3/Send.3
Note: Writing man/man3/SendCmds.3
Note: Writing man/man3/SendDataBytes.3
Note: Writing man/man3/SendIFC.3
Note: Writing man/man3/SendList.3
Note: Writing man/man3/SendLLO.3
Note: Writing man/man3/SendSetup.3
Note: Writing man/man3/SetRWLS.3
Note: Writing man/man3/TestSRQ.3
Note: Writing man/man3/TestSys.3
Note: Writing man/man3/Trigger.3
Note: Writing man/man3/Trigger.3
Note: Writing man/man3/WaitSRQ.3
Note: Writing man/man3/AsyncIbcnt.3
Note: Writing man/man3/AsyncIberr.3
Note: Writing man/man3/AsyncIbsta.3
Note: Writing man/man3/CFGn.3
Note: Writing man/man3/GetPAD.3
Note: Writing man/man3/GetSAD.3
Note: Writing man/man3/MakeAddr.3
Note: Writing man/man3/MLA.3
Note: Writing man/man3/MSA.3
Note: Writing man/man3/MTA.3
Note: Writing man/man3/PPE_byte.3
Note: Writing man/man3/ThreadIbcnt.3
Note: Writing man/man3/ThreadIberr.3
Note: Writing man/man3/ThreadIbsta.3
if test `basename /usr/bin/jw` = "jw" ; then \
/usr/bin/jw -f docbook -b pdf ./linux-gpib.sgml ; \
else \
/usr/bin/jw ./linux-gpib.sgml -F sgml -P table.in.float=none -o
linux-gpib.pdf ; \
fi
Using catalogs: /etc/sgml/catalog
Using stylesheet: /usr/share/docbook-utils/docbook-utils.dsl#print
Working on: /<<PKGBUILDDIR>>/doc/./linux-gpib.sgml
Done.
This is pdfTeX, Version 3.141592653-2.6-1.40.29 (TeX Live 2026/Debian)
(preloaded format=pdfjadetex)
restricted \write18 enabled.
entering extended mode
(/<<PKGBUILDDIR>>/doc/./linux-gpib.tex
JadeTeX 2003/04/27: 3.13
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd)
Elements will be labelled
Jade begin document sequence at 20
No file linux-gpib.aux.
(/usr/share/texmf/tex/latex/tipa/t3ptm.fd)
(/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
) (/usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg))
! Undefined control sequence.
<argument> \c_sys_backend_str
l.20 {48\p@}}
\Node%
Package fancyhdr Warning: \fancyfoot's `E' option without twoside option is use
less.
(fancyhdr) Please consider using the `twoside' option on input l
ine 111.
Package fancyhdr Warning: \fancyhead's `E' option without twoside option is use
less.
(fancyhdr) Please consider using the `twoside' option on input l
ine 111.
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1phv.fd)
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd)
Package fancyhdr Warning: \fancyfoot's `E' option without twoside option is use
less.
(fancyhdr) Please consider using the `twoside' option on input l
ine 551.
[1.0.4{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}{/usr/share/texlive/te
xmf-dist/fonts/enc/dvips/base/8r.enc}]
(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd)
(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd)
(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd)
(/usr/share/texlive/texmf-dist/tex/latex/wasysym/uwasy.fd) [2.0.4] [3.0.4]
[4.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 1316--1394
[] [] [] []
Overfull \hbox (106.99997pt too wide) in alignment at lines 1394--2821
[] [] [] []
Package longtable Warning: Column widths have changed
(longtable) in table 1 on input line 2821.
[5.0.4] [6.0.4] [7.0.4] [8.0.4]
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 2851.
[9.0.4] [10.0.4] [11.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 4261--4339
[] [] [] []
Overfull \hbox (1.99997pt too wide) in alignment at lines 4339--8714
[] [] [] []
[12.0.4] [13.0.4] [14.0.4] [15.0.4]
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 9323.
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 9323.
[16.0.4] [17.0.4] [18.0.4] [19.0.4] [20.0.4]
Overfull \hbox (1.19998pt too wide) in alignment at lines 11258--11305
[] []
Overfull \hbox (1.19998pt too wide) in alignment at lines 11305--12067
[] []
[21.0.4] [22.0.4] [23.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 13260--13320
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 13320--14304
[] [] []
[24.0.4] [25.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 14605--14683
[] [] [] []
Overfull \hbox (1.99997pt too wide) in alignment at lines 14683--15954
[] [] [] []
[26.0.4
pdfTeX warning (ext4): destination with the same identifier (name{0:1141}) has
been already used, duplicate ignored
<argument> ...shipout:D \box_use:N \l_shipout_box
\__shipout_drop_firstpage_...
l.15954 \endTeXTable
{}%] [27.0.4] [28.0.4] [29.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 16378--16456
[] [] [] []
Overfull \hbox (106.99997pt too wide) in alignment at lines 16456--18768
[] [] [] []
Package longtable Warning: Column widths have changed
(longtable) in table 6 on input line 18768.
[30.0.4] [31.0.4] [32.0.4] [33.0.4] [34.0.4] [35.0.4] [36.0.4]
Overfull \hbox (1.99997pt too wide) in alignment at lines 20935--21013
[] [] [] []
Overfull \hbox (106.99997pt too wide) in alignment at lines 21013--23318
[] [] [] []
Package longtable Warning: Column widths have changed
(longtable) in table 7 on input line 23318.
[37.0.4] [38.0.4] [39.0.4] [40.0.4] [41.0.4] [42.0.4] [43.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 24094--24154
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 24154--24329
[] [] []
[44.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 25039--25099
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 25099--25331
[] [] []
[45.0.4] [46.0.4] [47.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 26762--26822
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 26822--27724
[] [] []
[48.0.4] [49.0.4] [50.0.4] [51.0.4] [52.0.4] [53.0.4] [54.0.4] [55.0.4]
[56.0.4] [57.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 32147--32207
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 32207--32398
[] [] []
[58.0.4] [59.0.4] [60.0.4] [61.0.4] [62.0.4] [63.0.4] [64.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 35342--35402
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 35402--36416
[] [] []
[65.0.4] [66.0.4] [67.0.4] [68.0.4] [69.0.4] [70.0.4] [71.0.4] [72.0.4]
[73.0.4] [74.0.4] [75.0.4] [76.0.4] [77.0.4] [78.0.4] [79.0.4] [80.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 44144--44204
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 44204--44378
[] [] []
[81.0.4] [82.0.4] [83.0.4] [84.0.4] [85.0.4] [86.0.4] [87.0.4] [88.0.4]
[89.0.4] [90.0.4]
Overfull \hbox (11.99951pt too wide) in paragraph at lines 49394--49394
[]\T1/pcr/m/n/9 addressList[ 1 ] = MakeAddr(3, 0); /* primary address 3, no se
condary address */[]
Overfull \hbox (28.1995pt too wide) in paragraph at lines 49395--49395
[]\T1/pcr/m/n/9 addressList[ 2 ] = MakeAddr(7, 0x70); /* primary address 3, se
condary address 16 */[]
Overfull \hbox (44.39948pt too wide) in paragraph at lines 49396--49396
[]\T1/pcr/m/n/9 addressList[ 3 ] = MakeAddr(20, MSA(9)); /* primary address 20
, secondary address 9 */[]
[91.0.4] [92.0.4]
Package hyperref Warning: Token not allowed in a PDF string (Unicode):
(hyperref) removing `subscript' on input line 50411.
[93.0.4
pdfTeX warning (ext4): destination with the same identifier (name{0:4048}) has
been already used, duplicate ignored
<argument> ...shipout:D \box_use:N \l_shipout_box
\__shipout_drop_firstpage_...
l.50477 {1}}
\Seq%] [94.0.4] [95.0.4
pdfTeX warning (ext4): destination with the same identifier (name{0:4127}) has
been already used, duplicate ignored
<argument> ...shipout:D \box_use:N \l_shipout_box
\__shipout_drop_firstpage_...
l.51450 {1}}
Synopsis\def\HeadingText{%]
Overfull \hbox (1.59998pt too wide) in alignment at lines 51817--51877
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 51877--52881
[] [] []
[96.0.4]
Overfull \hbox (1.59998pt too wide) in alignment at lines 53013--53073
[] [] []
Overfull \hbox (1.59998pt too wide) in alignment at lines 53073--53610
[] [] []
[97.0.4] [98.0.4] [99.0.4] [100.0.4] [101.0.4] [102.0.4] [103.0.4] [104.0.4]
[105.0.4] [106.0.4]
Package longtable Warning: Table widths have changed. Rerun LaTeX.
(/<<PKGBUILDDIR>>/doc/./linux-gpib.aux)
Package rerunfilecheck Warning: File `linux-gpib.out' has changed.
(rerunfilecheck) Rerun to get outlines right
(rerunfilecheck) or use package `bookmark'.
)
(see the transcript file for additional information)</usr/share/texlive/texmf-d
ist/fonts/type1/public/amsfonts/cm/cmmi9.pfb></usr/share/texlive/texmf-dist/fon
ts/type1/urw/courier/ucrb8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/
courier/ucrbo8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrr
8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrro8a.pfb></usr
/share/texlive/texmf-dist/fonts/type1/urw/helvetic/uhvb8a.pfb></usr/share/texli
ve/texmf-dist/fonts/type1/urw/times/utmb8a.pfb></usr/share/texlive/texmf-dist/f
onts/type1/urw/times/utmr8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/
times/utmri8a.pfb>
Output written on linux-gpib.pdf (106 pages, 352063 bytes).
Transcript written on linux-gpib.log.
make[3]: *** [Makefile:750: linux-gpib.pdf] Error 9
make[3]: Leaving directory '/<<PKGBUILDDIR>>/doc'
make[2]: *** [Makefile:457: all-recursive] Error 1
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: *** [Makefile:389: all] Error 2
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_build: error: make -j2 returned exit code 2
make: *** [debian/rules:11: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess failed with exit
status 2
--------------------------------------------------------------------------------
--- End Message ---
--- Begin Message ---
Source: linux-gpib-user
Source-Version: 4.3.7-6
Done: Matthias Geiger <[email protected]>
We believe that the bug you reported is fixed in the latest version of
linux-gpib-user, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Matthias Geiger <[email protected]> (supplier of updated linux-gpib-user
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Mon, 06 Jul 2026 23:00:48 +0200
Source: linux-gpib-user
Architecture: source
Version: 4.3.7-6
Distribution: unstable
Urgency: medium
Maintainer: Debian Electronics Team
<[email protected]>
Changed-By: Matthias Geiger <[email protected]>
Closes: 1139512
Changes:
linux-gpib-user (4.3.7-6) unstable; urgency=medium
.
* Format patches with gbp pq
* Add patch to ignore wrong error code (Closes: #1139512)
* d/control: Switch to S-V 4.7.4, drop priority: optional
* d/control: Switch to dh 14
Checksums-Sha1:
5ac9375088ec12e96ec808e48bb7fe94255c82b8 2861 linux-gpib-user_4.3.7-6.dsc
72bc15c003e5d2a1d9630b74e83992adfbd5fae7 8124
linux-gpib-user_4.3.7-6.debian.tar.xz
b00280f65ffc087f173f3d0ced1eb31acbab16df 761992
linux-gpib-user_4.3.7-6.git.tar.xz
cea578e061eb8406035a7d9bdd070d61857d3e2d 17536
linux-gpib-user_4.3.7-6_source.buildinfo
Checksums-Sha256:
519f2a6ebc5fa33411363f9f239131d4b9186b8dc76ebc343ec6075c0ea20ceb 2861
linux-gpib-user_4.3.7-6.dsc
287d6d172af712a011d3a164c1b44ac5122d3d585cba89d05607593a213b2c96 8124
linux-gpib-user_4.3.7-6.debian.tar.xz
01790fc776cd1018943b84fcd7d6e0035ce8d9d8f997b151acf602aaad7794ca 761992
linux-gpib-user_4.3.7-6.git.tar.xz
64f4525dc6c03a6be4127e1fec46bf28e9933284f36d48bf02637adc2754539c 17536
linux-gpib-user_4.3.7-6_source.buildinfo
Files:
81e8e9a1774f5c95d4ef20768fc718ab 2861 utils optional
linux-gpib-user_4.3.7-6.dsc
6447bd42e8c79975b9c88cda3fb4bc5f 8124 utils optional
linux-gpib-user_4.3.7-6.debian.tar.xz
1e686f362efbb3cda7f6a6a86a4765ac 761992 utils None
linux-gpib-user_4.3.7-6.git.tar.xz
da3e44a0cc667d4ac5f227746dfd1df6 17536 utils optional
linux-gpib-user_4.3.7-6_source.buildinfo
Git-Tag-Info: tag=79b5b28a2927615d8053d17b9c027219b7891e88
fp=14593bff4a5ebf6fe0e9716eecbedbb607b9b2be
Git-Tag-Tagger: Matthias Geiger <[email protected]>
-----BEGIN PGP SIGNATURE-----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=tZpq
-----END PGP SIGNATURE-----
pgp94A2fLm0G4.pgp
Description: PGP signature
--- End Message ---
