Package: installation-reports Debian-installer-version: 20050121 from http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
uname -a: Linux powerstation 2.4.27-2-386 #1 Thu Dec 30 18:13:12 JST 2004 i586 GNU/Linux Date: 22.01.2005, 20:37 CET Method: network installation from ftp.de.debian.org, booted from sarge-i386-netinst.iso, no proxy used, installation mode default (linux) Machine: Selfmade machine Processor: AMD-K6 3D, 400 Mhz Memory: 62620 kB Root Device: IDE Seagate ST36531A, 6 GB Root Size/partition table: hda1 ext3 mount on / hda2 swap Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02) 0000:00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) 0000:00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86) 0000:01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee (rev 03) 0000:00:00.0 0600: 1106:0598 (rev 04) 0000:00:01.0 0604: 1106:8598 0000:00:07.0 0601: 1106:0586 (rev 47) 0000:00:07.1 0101: 1106:0571 (rev 06) 0000:00:07.2 0c03: 1106:3038 (rev 02) 0000:00:07.3 0680: 1106:3040 (rev 10) 0000:00:09.0 0200: 1106:3106 (rev 86) 0000:01:00.0 0300: 121a:0003 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: No problems! Greetings Jens Voskuhl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]