Package: installation-reports INSTALL REPORT
Debian-installer-version: http://archive.progeny.com/debian/dists/sarge/main/installer-i386/current//images/netboot/netboot.tar.gz fetched at 2005-01-25 uname -a: Linux griswold 2.4.27-2-386 #1 Thu Jan 20 10:55:08 JST 2005 i586 GNU/Linux Date: 2005-01-25 Method: How did you install? - Boot from dhcpd, install from tftpd-hpa. What did you boot off? - The network. If network install, from where? - ftp://ftp.se.debian.org/ Proxied? - No proxy. Machine: soekris4801 Processor: Geode by NSC at 266 MHz Memory: 128 MB Root Device: ide device. HITACHI_DK239A-65B Root Size/partition table: Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda1 255001 53563 187832 23% / tmpfs 63656 0 63656 0% /dev/shm /dev/hda9 2187676 32896 2043652 2% /home /dev/hda8 170010 4160 156780 3% /tmp /dev/hda5 2202544 266548 1824112 13% /usr /dev/hda6 984822 70613 861669 8% /var Output of lspci and lspci -n: griswold:~# lspci 0000:00:00.0 Host bridge: Cyrix Corporation PCI Master 0000:00:06.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 0000:00:07.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 0000:00:08.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 0000:00:12.0 ISA bridge: National Semiconductor Corporation: Unknown device 0510 0000:00:12.1 Bridge: National Semiconductor Corporation: Unknown device 0511 0000:00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE (rev 01) 0000:00:12.5 Bridge: National Semiconductor Corporation: Unknown device 0515 0000:00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 08) griswold:~# griswold:~# lspci -n 0000:00:00.0 0600: 1078:0001 0000:00:06.0 0200: 100b:0020 0000:00:07.0 0200: 100b:0020 0000:00:08.0 0200: 100b:0020 0000:00:12.0 0601: 100b:0510 0000:00:12.1 0680: 100b:0511 0000:00:12.2 0101: 100b:0502 (rev 01) 0000:00:12.5 0680: 100b:0515 0000:00:13.0 0c03: 0e11:a0f8 (rev 08) griswold:~# Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: While it is nice that the install automatically detects and makes a note about multiple network interfaces, it would be beneficial to inexperienced users to have about about enabling the interfaces not being used during the install. -- Søren O. ,''`. : :' : GPG key id: 0x1EB2DE66 `. `' GPG signed mail preferred. `-