Package: sbcl Version: 1:0.8.19-1 Severity: important Hello,
building sbcl on amd64 works fine if the kernel version is 2.6.8 but fails with kernel version 2.6.10. Booting with noexec=off shows no difference. This segfault is different thant the usual alignment ones, it gets not recorded in the kern.log. If you need any additional infos, drop me a line. The buildd log is attached. Kind regards Frederik Schuler -- ENOSIG
--- Begin Message ---Automatic build of sbcl_1:0.8.19-1 on athlon.lowpingbastards.de by sbuild/amd64 1.1.1.1 Build started at 20050127-0238 ****************************************************************************** Checking available source versions... Fetching source files... Reading Package Lists... Building Dependency Tree... Need to get 3059kB of source archives. Get:1 http://debian-amd64.alioth.debian.org sid/main sbcl 1:0.8.19-1 (dsc) [665B] Get:2 http://debian-amd64.alioth.debian.org sid/main sbcl 1:0.8.19-1 (tar) [3047kB] Get:3 http://debian-amd64.alioth.debian.org sid/main sbcl 1:0.8.19-1 (diff) [11.6kB] Fetched 3059kB in 26s (116kB/s) Download complete and in download only mode ** Using build dependencies supplied by package: Build-Depends: debhelper (>> 4.1.16), sbcl, common-lisp-controller (>= 4.2), texinfo, tetex-bin, time Checking for already installed source dependencies... debhelper: already installed (in sufficient version 4.2.30 >> 4.1.16) sbcl: missing common-lisp-controller: missing texinfo: missing tetex-bin: missing time: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge -q -y install sbcl common-lisp-controller texinfo tetex-bin time Reading Package Lists... Building Dependency Tree... The following extra packages will be installed: cl-asdf ed libice6 libkpathsea3 libpaper1 libpng12-0 libsm6 libt1-5 libwww0 libx11-6 libxaw7 libxext6 libxmu6 libxpm4 libxt6 mime-support realpath tetex-base ucf xfree86-common xlibs-data Suggested packages: ilisp tetex-extra lpr gv postscript-viewer xpdf-reader pdf-viewer chktex lacheck rubber x-window-system-core x-window-system Recommended packages: libpaper-utils tetex-doc dialog psutils texi2html perl-tk The following NEW packages will be installed: cl-asdf common-lisp-controller ed libice6 libkpathsea3 libpaper1 libpng12-0 libsm6 libt1-5 libwww0 libx11-6 libxaw7 libxext6 libxmu6 libxpm4 libxt6 mime-support realpath sbcl tetex-base tetex-bin texinfo time ucf xfree86-common xlibs-data 0 upgraded, 26 newly installed, 0 to remove and 1 not upgraded. Need to get 14.1MB/38.7MB of archives. After unpacking 159MB of additional disk space will be used. Get:1 http://debian-amd64.alioth.debian.org sid/main cl-asdf 1.86-1 [46.5kB] Get:2 http://debian-amd64.alioth.debian.org sid/main realpath 1.9.16 [21.9kB] Get:3 http://debian-amd64.alioth.debian.org sid/main common-lisp-controller 4.12 [22.2kB] Get:4 http://debian-amd64.alioth.debian.org sid/main sbcl 1:0.8.18.38-1 [14.0MB] Get:5 http://debian-amd64.alioth.debian.org sid/main time 1.7-19 [33.0kB] Preconfiguring packages ... Fetched 14.1MB in 1m56s (121kB/s) Selecting previously deselected package cl-asdf. (Reading database ... 14600 files and directories currently installed.) Unpacking cl-asdf (from .../cl-asdf_1.86-1_all.deb) ... Selecting previously deselected package realpath. Unpacking realpath (from .../realpath_1.9.16_amd64.deb) ... Selecting previously deselected package common-lisp-controller. Unpacking common-lisp-controller (from .../common-lisp-controller_4.12_all.deb) ... Setting up cl-asdf (1.86-1) ... Setting up realpath (1.9.16) ... Setting up common-lisp-controller (4.12) ... Selecting previously deselected package sbcl. (Reading database ... 14660 files and directories currently installed.) Unpacking sbcl (from .../sbcl_1%3a0.8.18.38-1_amd64.deb) ... Selecting previously deselected package texinfo. Unpacking texinfo (from .../texinfo_4.7-2.2_amd64.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../apt/archives/ucf_1.13_all.deb) ... Moving old data out of the way Selecting previously deselected package tetex-base. Unpacking tetex-base (from .../tetex-base_2.0.2c-3_all.deb) ... Selecting previously deselected package libice6. Unpacking libice6 (from .../libice6_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package libkpathsea3. Unpacking libkpathsea3 (from .../libkpathsea3_2.0.2-26_amd64.deb) ... Selecting previously deselected package libpaper1. Unpacking libpaper1 (from .../libpaper1_1.1.14-3_amd64.deb) ... Selecting previously deselected package libpng12-0. Unpacking libpng12-0 (from .../libpng12-0_1.2.8rel-1_amd64.deb) ... Selecting previously deselected package libsm6. Unpacking libsm6 (from .../libsm6_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package xfree86-common. Unpacking xfree86-common (from .../xfree86-common_4.3.0.dfsg.1-10_all.deb) ... Selecting previously deselected package xlibs-data. Unpacking xlibs-data (from .../xlibs-data_4.3.0.dfsg.1-10_all.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package libxext6. Unpacking libxext6 (from .../libxext6_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package libt1-5. Unpacking libt1-5 (from .../libt1-5_5.0.2-3_amd64.deb) ... Selecting previously deselected package libwww0. Unpacking libwww0 (from .../libwww0_5.4.0-9_amd64.deb) ... Selecting previously deselected package libxt6. Unpacking libxt6 (from .../libxt6_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package libxmu6. Unpacking libxmu6 (from .../libxmu6_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package libxpm4. Unpacking libxpm4 (from .../libxpm4_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package libxaw7. Unpacking libxaw7 (from .../libxaw7_4.3.0.dfsg.1-10_amd64.deb) ... Selecting previously deselected package ed. Unpacking ed (from .../archives/ed_0.2-20_amd64.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.29-1_all.deb) ... Selecting previously deselected package tetex-bin. Unpacking tetex-bin (from .../tetex-bin_2.0.2-26_amd64.deb) ... Selecting previously deselected package time. Unpacking time (from .../archives/time_1.7-19_amd64.deb) ... Setting up sbcl (0.8.18.38-1) ... /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc. Error running init-common-lisp-controller-v4: segmentation violation at #X20B49007 mv: cannot stat `sbcl-new.core': No such file or directory FAILED Setting up texinfo (4.7-2.2) ... Setting up ucf (1.13) ... Setting up tetex-base (2.0.2c-3) ... Creating config file /etc/texmf/mktex.cnf with new version Creating config file /etc/texmf/dvips/config.builtin35 with new version Creating config file /etc/texmf/updmap.d/00updmap.cfg with new version Creating config file /etc/texmf/dvipdfm/config with new version Creating config file /etc/texdoctk/texdocrc with new version Setting up libice6 (4.3.0.dfsg.1-10) ... Setting up libkpathsea3 (2.0.2-26) ... Setting up libpaper1 (1.1.14-3) ... Creating config file /etc/papersize with new version Setting up libpng12-0 (1.2.8rel-1) ... Setting up libsm6 (4.3.0.dfsg.1-10) ... Setting up xfree86-common (4.3.0.dfsg.1-10) ... Adding system startup for /etc/init.d/xfree86-common ... /etc/rcS.d/S70xfree86-common -> ../init.d/xfree86-common Setting up X server socket directory /tmp/.X11-unix...done. Setting up ICE socket directory /tmp/.ICE-unix...done. Setting up xlibs-data (4.3.0.dfsg.1-10) ... Setting up libx11-6 (4.3.0.dfsg.1-10) ... Setting up libxext6 (4.3.0.dfsg.1-10) ... Setting up libt1-5 (5.0.2-3) ... Setting up libwww0 (5.4.0-9) ... Setting up libxt6 (4.3.0.dfsg.1-10) ... Setting up libxmu6 (4.3.0.dfsg.1-10) ... Setting up libxpm4 (4.3.0.dfsg.1-10) ... Setting up libxaw7 (4.3.0.dfsg.1-10) ... Setting up ed (0.2-20) ... Setting up mime-support (3.29-1) ... Setting up tetex-bin (2.0.2-26) ... Creating config file /etc/texmf/texmf.d/05TeXMF.cnf with new version Creating config file /etc/texmf/texmf.d/15Plain.cnf with new version Creating config file /etc/texmf/texmf.d/45TeXinputs.cnf with new version Creating config file /etc/texmf/texmf.d/55Fonts.cnf with new version Creating config file /etc/texmf/texmf.d/65BibTeX.cnf with new version Creating config file /etc/texmf/texmf.d/75DviPS.cnf with new version Creating config file /etc/texmf/texmf.d/85Misc.cnf with new version Creating config file /etc/texmf/texmf.d/90TeXDoc.cnf with new version Creating config file /etc/texmf/texmf.d/95NonPath.cnf with new version Generating /etc/texmf/texmf.cnf ... Creating config file /etc/texmf/texmf.cnf with new version done Generating /var/lib/texmf/web2c/fmtutil.cnf ... done Regenerating /var/lib/texmf/web2c/updmap.cfg ... done Running initex. This may take some time. ... fmtutil: /var/lib/texmf/web2c/latex.fmt installed. fmtutil: /var/lib/texmf/web2c/pdflatex.fmt installed. fmtutil: /var/lib/texmf/web2c/pdftex.fmt installed. fmtutil: /var/lib/texmf/web2c/tex.fmt installed. fmtutil: /var/lib/texmf/web2c/cont-en.efmt installed. fmtutil: /var/lib/texmf/web2c/elatex.efmt installed. fmtutil: /var/lib/texmf/web2c/etex.efmt installed. fmtutil: /var/lib/texmf/web2c/latex.efmt installed. fmtutil: /var/lib/texmf/web2c/mptopdf.efmt installed. fmtutil: /var/lib/texmf/web2c/pdfelatex.efmt installed. fmtutil: /var/lib/texmf/web2c/pdfetex.efmt installed. fmtutil: /var/lib/texmf/web2c/pdflatex.efmt installed. fmtutil: /var/lib/texmf/web2c/mf.base installed. Running updmap. This may take some time. ... If you want to change the default settings, use /usr/bin/texconfig to configure teTeX. Fixing permissions and group of ls-R as specified by debconf ... mode of `/var/lib/texmf/ls-R' changed to 0664 (rw-rw-r--) mode of `/var/lib/texmf/ls-R-TEXMFMAIN' changed to 0664 (rw-rw-r--) mode of `/var/cache/fonts/ls-R' changed to 0664 (rw-rw-r--) changed group of `/var/lib/texmf/ls-R' to users changed group of `/var/lib/texmf/ls-R-TEXMFMAIN' to users changed group of `/var/cache/fonts/ls-R' to users Setting up time (1.7-19) ... Checking correctness of source dependencies... ------------------------------------------------------------------------------ dpkg-source: extracting sbcl in sbcl-0.8.19 dpkg-buildpackage: source package is sbcl dpkg-buildpackage: source version is 1:0.8.19-1 dpkg-buildpackage: host architecture is amd64 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp rm -rf debian/sbcl debian/*.debhelper debian/sbcl.substvars debian/files GNUMAKE=make sh clean.sh make[1]: Entering directory `/home/freddy/build/sbcl/sbcl-0.8.19/doc/manual' rm -f *~ *.bak *.orig \#*\# .\#* texput.log *.fasl rm -rf sbcl asdf "docstrings/" rm -f contrib-docs.texi-temp rm -f package-locks.texi-temp rm -f html-stamp tempfiles-stamp rm -f asdf.aux asdf.cps asdf.fns asdf.ky asdf.log asdf.pg asdf.toc asdf.tps asdf.vrs sbcl.aux sbcl.cps sbcl.fns sbcl.ky sbcl.log sbcl.pg sbcl.toc sbcl.tps sbcl.vrs rm -f sbcl.info sbcl.info-* make[1]: Leaving directory `/home/freddy/build/sbcl/sbcl-0.8.19/doc/manual' rm -rf src-original contrib-original dh_clean debian/rules build dh_testdir touch configure-stamp dh_testdir # Save original source cp -a src src-original cp -a contrib contrib-original CFLAGS="-DSBCL_HOME=/usr/lib/sbcl/ -O2" GNUMAKE=make ./make.sh 'sbcl --sysinit /dev/null --userinit /dev/null --noprogrammer --core /usr/lib/sbcl/sbcl-dist.core' //starting build: Thu Jan 27 02:41:58 CET 2005 //SBCL_XC_HOST="sbcl --sysinit /dev/null --userinit /dev/null --noprogrammer --core /usr/lib/sbcl/sbcl-dist.core" //entering make-config.sh //ensuring the existence of output/ directory //initializing /home/freddy/build/sbcl/sbcl-0.8.19/local-target-features.lisp-expr //guessing default target CPU architecture from host architecture //setting up CPU-architecture-dependent information sbcl_arch="x86-64" //setting up symlink src/compiler/target //setting up symlink src/assembly/target //setting up symlink src/compiler/assembly //setting up OS-dependent information //finishing /home/freddy/build/sbcl/sbcl-0.8.19/local-target-features.lisp-expr //entering make-host-1.sh //building cross-compiler, and doing first genesis This is SBCL 0.8.18.38, an implementation of ANSI Common Lisp. More information about SBCL is available at <http://www.sbcl.org/>. SBCL is free software, provided as is, with absolutely no warranty. It is mostly in the public domain; some portions are provided under BSD-style licenses. See the CREDITS and COPYING files in the distribution for more information. WARNING: treating deprecated --noprogrammer as --disable-debugger * 5 * unhandled SIMPLE-ERROR in thread 10907: segmentation violation at #X20031BB4 unhandled condition in --disable-debugger mode, quitting ; compilation unit aborted ; caught 1 fatal ERROR condition real 0m0.364s user 0m0.247s sys 0m0.077s make: *** [build-stamp] Error 1 ****************************************************************************** Build finished at 20050127-0241 FAILED [dpkg-buildpackage died] ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge libxmu6 tetex-base time mime-support libxaw7 ucf libxt6 libwww0 cl-asdf common-lisp-controller libxpm4 xfree86-common realpath libpaper1 libsm6 xlibs-data libkpathsea3 sbcl libxext6 tetex-bin libt1-5 ed libpng12-0 libice6 libx11-6 texinfo (Reading database ... 23327 files and directories currently installed.) Removing time ... Removing sbcl ... Purging configuration files for sbcl ... Removing tetex-bin ... Purging configuration files for tetex-bin ... Removing libt1-5 ... Purging configuration files for libt1-5 ... Removing ed ... Removing libpng12-0 ... Purging configuration files for libpng12-0 ... Removing libx11-6 ... Purging configuration files for libx11-6 ... Removing tetex-base ... Purging configuration files for tetex-base ... Removing mime-support ... Purging configuration files for mime-support ... Removing libxaw7 ... Purging configuration files for libxaw7 ... Removing libwww0 ... Purging configuration files for libwww0 ... Removing common-lisp-controller ... Purging configuration files for common-lisp-controller ... dpkg - warning: while removing common-lisp-controller, directory `/var/cache/common-lisp-controller' not empty so not removed. Removing libxpm4 ... Purging configuration files for libxpm4 ... Removing xfree86-common ... Purging configuration files for xfree86-common ... Removing any system startup links for /etc/init.d/xfree86-common ... /etc/rcS.d/S70xfree86-common Removing realpath ... Removing libpaper1 ... Purging configuration files for libpaper1 ... Removing xlibs-data ... Purging configuration files for xlibs-data ... Removing libkpathsea3 ... Purging configuration files for libkpathsea3 ... Removing texinfo ... Removing libxmu6 ... Purging configuration files for libxmu6 ... Removing ucf ... Purging configuration files for ucf ... dpkg - warning: while removing ucf, directory `/var/lib/ucf' not empty so not removed. Removing libxt6 ... Purging configuration files for libxt6 ... Removing cl-asdf ... Removing libsm6 ... Purging configuration files for libsm6 ... Removing libxext6 ... Purging configuration files for libxext6 ... Removing libice6 ... Purging configuration files for libice6 ...
--- End Message ---
signature.asc
Description: Digital signature
