Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-netinst.iso, 1 Feb 2005
uname -a: Linux Calais 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: 1 Feb 2005, 10a
Method: Install from Sarge netinst CD (boot from CD, install from network: mirrors.kernel.org).
Machine: Dell GX150
Processor: Intel Celeron
Memory: 256 MB
Root Device: IDE
Root Size/partition table:
/dev/hda 10.09 GB
16 heads, 63 sectors/track, 19386 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
/dev/hda1 (boot) 1-18522 Linux
/dev/hda2 18523-19386 W95 Ext’d (LBA)
/dev/hda5 18523-19386 Linux swap
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 11)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 11)
0000:01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
0000:00:00.0 0600: 8086:1130 (rev 04)
0000:00:02.0 0300: 8086:1132 (rev 04)
0000:00:1e.0 0604: 8086:244e (rev 11)
0000:00:1f.0 0601: 8086:2440 (rev 11)
0000:00:1f.1 0101: 8086:244b (rev 11)
0000:00:1f.2 0c03: 8086:2442 (rev 11)
0000:00:1f.3 0c05: 8086:2443 (rev 11)
0000:00:1f.4 0c03: 8086:2444 (rev 11)
0000:00:1f.5 0401: 8086:2445 (rev 11)
0000:01:0c.0 0200: 10b7:9200 (rev 78)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
When partitioning, I chose the guided partitioning, got to the review screen (with the undo changes/finish and write options), and wanted to go back and manually edit the partition table. When I went to “Guided Partitioning” and selected “Manually edit partition table,” the installer simply handed me back to the review screen without letting me edit the partition tables.
