Package: installation-reports Debian-installer-version: <31.1.2005 ftp.debian.org>
uname -a: <dunno (didn't know to check this)> Date: <?.2.2005 now :just trying to install> Method: <I am installing from a cd, that has been checked for errors, none found. expert mode bc normal hangs and with the 2.6kernel.> Machine: < Self pivked parts that work together fine.> Processor: AMD athlon xp 2600+(barton) MOBO: Abit nf7-s (version 2.0) Memory: 1 GB (2*512MB ddr400 kingston) Root Device: <SATA silicon image controller and seagate ST3200822AS 200G HD> Root Size/partition table: <C:\winxp 16 GB , d:\ 70 GB , E:\ 50 GB And about 30GB free for my new linux install0> Output of lspci and lspci -n: couldnt get them. This is from my working install witch I got working: 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 0000:01:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 0000:01:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07) 0000:01:08.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 31) 0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 0000:02:00.0 VGA compatible controller: nVidia Corporation NV31 [GeForce FX 5600] (rev a1) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [o ] Configure network HW: [o ] Config network: [o ] Detect CD: [o ] Load installer modules: [o ] Detect hard drives: [? ] ?Detect hardware? partially working Partition hard drives: [e ] Couldn't find any hd:s Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: However my harddrive can't be partitioned and so i can't install. I have checked that my s-ata hardware is supported (silicon image) and the modules are loaded "libata" and "sata_sil". (I even tried to manually load the modules again: "insmod libata and modprobe libata..." But not found) I guess it isn't supposed to be found eighter. So the partitioner doesn't find any hd:s to partition(not using automatic partitioning). And after it ask wether to contingue or go back neighter one work(Get a screen with with the blinking line) Another thing if I let the system load USB storage support module it hangs on 2%.(But i've allready read about the usb problems) <Didn't Work too good for mee :) Hopefully some help soon(my friend a guru is trying to help too but his suggestions haven't helped...)> T: Mika Rastas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
