Package: src Version: 3.2.21-3 Severity: normal Dear Mantainers, after the last kernel update (Debian Sid, v. 3.2.21-3) fancontrol works randomly.
The problem depends on the fact that the hwmon sensor alternates, at every boot, his path between /sys/devices/platform/eeepc/hwmon/hwmon1 and /sys/devices/platform/eeepc/hwmon/hwmon2. The only solution would be to reconfigure the fancontrol every time, but it is clear that this solution is extremely annoying. Here is my current /etc/fancontrol: # Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon0= hwmon2=devices/platform/eeepc DEVNAME=hwmon0=acpitz hwmon2=eeepc FCTEMPS=hwmon2/pwm1=hwmon0/temp1_input FCFANS= hwmon2/pwm1=hwmon2/fan1_input MINTEMP=hwmon2/pwm1=54 MAXTEMP=hwmon2/pwm1=70 MINSTART=hwmon2/pwm1=150 MINSTOP=hwmon2/pwm1=20 When the sensor is recognized as hwmon1, obviously fancontrol does not work. I hope I was clear and I apologize for my bad English Hi and thank you very much, Domenico -- Package-specific info: ** Version: Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=d7ca4739-5c84-4af1-8ed6-423a8891fa17 ro quiet ** Not tainted ** Kernel log: [ 21.056118] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 21.103080] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6 [ 21.114132] composite sync not supported [ 21.209569] WARNING! power/level is deprecated; use power/control instead [ 21.328705] Linux media interface: v0.10 [ 21.358963] Linux video capture interface: v2.00 [ 21.392804] [drm] initialized overlay support [ 21.392852] composite sync not supported [ 21.405364] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071) [ 21.414148] fbcon: inteldrmfb (fb0) is primary device [ 21.422651] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7 [ 21.422931] usbcore: registered new interface driver uvcvideo [ 21.422937] USB Video Class driver (1.1.1) [ 21.505031] eeepc_laptop: BIOS says wireless lan is blocked, but the pci device is present [ 21.505039] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model [ 21.505407] eeepc_laptop: Unable to find port [ 21.592248] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x020030) [ 21.664091] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x02, 0x64. [ 21.865473] Console: switching to colour frame buffer device 128x37 [ 21.875169] fb0: inteldrmfb frame buffer device [ 21.875174] drm: registered panic notifier [ 21.876434] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 21.876539] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.876687] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 21.876753] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 21.889603] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8 [ 21.988973] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 21.992615] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 21.992951] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 25.215176] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k [ 25.707289] EXT3-fs (sda5): using internal journal [ 25.972490] fuse init (API version 7.17) [ 28.421468] kjournald starting. Commit interval 5 seconds [ 28.422292] EXT3-fs (sda7): using internal journal [ 28.422307] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 29.685574] RPC: Registered named UNIX socket transport module. [ 29.685584] RPC: Registered udp transport module. [ 29.685591] RPC: Registered tcp transport module. [ 29.685596] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 29.781976] FS-Cache: Loaded [ 29.858447] FS-Cache: Netfs 'nfs' registered for caching [ 29.899864] Installing knfsd (copyright (C) 1996 [email protected]). [ 32.505640] apm: BIOS not found. [ 32.946525] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 33.202411] Bluetooth: Core ver 2.16 [ 33.202479] NET: Registered protocol family 31 [ 33.202486] Bluetooth: HCI device and connection manager initialized [ 33.202496] Bluetooth: HCI socket layer initialized [ 33.202502] Bluetooth: L2CAP socket layer initialized [ 33.203246] Bluetooth: SCO socket layer initialized [ 33.216687] Bluetooth: RFCOMM TTY layer initialized [ 33.216704] Bluetooth: RFCOMM socket layer initialized [ 33.216711] Bluetooth: RFCOMM ver 1.11 [ 33.270330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.270340] Bluetooth: BNEP filters: protocol multicast [ 33.586171] composite sync not supported [ 33.616322] composite sync not supported [ 33.620975] lp: driver loaded but no devices found [ 33.630795] ppdev: user-space parallel port driver [ 34.138844] ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X [ 34.139704] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.380068] usbcore: deregistering interface driver uvcvideo [ 34.578054] usb 1-8: USB disconnect, device number 2 [ 45.829946] composite sync not supported [ 45.864746] composite sync not supported [ 65.984844] pci 0000:01:00.0: [168c:002a] type 0 class 0x000280 [ 65.984900] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit] [ 65.985101] pci 0000:01:00.0: supports D1 [ 65.985110] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 65.985125] pci 0000:01:00.0: PME# disabled [ 65.985185] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff 64bit] [ 65.985210] pci 0000:01:00.0: BAR 0: set to [mem 0xf8000000-0xf800ffff 64bit] (PCI address [0xf8000000-0xf800ffff]) [ 66.151667] cfg80211: Calling CRDA to update world regulatory domain [ 66.374972] ath9k 0000:01:00.0: enabling device (0000 -> 0002) [ 66.374994] ath9k 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 66.375022] ath9k 0000:01:00.0: setting latency timer to 64 [ 66.805556] ath: EEPROM regdomain: 0x60 [ 66.805562] ath: EEPROM indicates we should expect a direct regpair map [ 66.805571] ath: Country alpha2 being used: 00 [ 66.805575] ath: Regpair used: 0x60 [ 66.862216] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 66.863905] Registered led device: ath9k-phy0 [ 66.863932] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8b60000, irq=19 [ 66.953210] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 69.436083] wlan0: authenticate with 38:22:9d:2f:f5:a4 (try 1) [ 69.438153] wlan0: authenticated [ 69.459209] wlan0: associate with 38:22:9d:2f:f5:a4 (try 1) [ 69.461801] wlan0: RX AssocResp from 38:22:9d:2f:f5:a4 (capab=0x411 status=0 aid=2) [ 69.461814] wlan0: associated [ 69.462344] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 80.656068] wlan0: no IPv6 routers present [ 5089.671624] composite sync not supported [ 5089.704475] composite sync not supported [ 5103.851380] composite sync not supported [ 5103.884526] composite sync not supported [ 5323.972152] /opt/texbin/bib[13196]: segfault at 0 ip b76ba394 sp bfe8b318 error 4 in libc-2.13.so[b759c000+156000] [ 5736.633869] composite sync not supported [ 5736.664433] composite sync not supported [ 5744.710313] composite sync not supported [ 5744.832220] composite sync not supported ** Model information not available ** Loaded modules: arc4 ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 parport_pc ppdev lp parport bnep rfcomm bluetooth crc16 cpufreq_conservative cpufreq_powersave cpufreq_userspace cpufreq_stats autofs4 uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc fuse snd_hda_codec_realtek joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq psmouse i915 snd_seq_device snd_timer coretemp snd serio_raw drm_kms_helper drm iTCO_wdt iTCO_vendor_support soundcore eeepc_laptop acpi_cpufreq mperf rng_core evdev sparse_keymap battery video processor button i2c_algo_bit i2c_core ac rfkill power_supply ext3 mbcache jbd sd_mod crc_t10dif ata_generic ata_piix libata scsi_mod thermal thermal_sys uhci_hcd ehci_hcd atl1e usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at dc00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:834a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 7fa00000-7fbfffff Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 000000007f800000-000000007f9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) Subsystem: AzureWave AW-NE771 802.11bgn Wireless Mini PCIe Card [AR9281] [1a3b:1067] Physical Slot: eeepc-wifi Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0) Subsystem: ASUSTeK Computer Inc. Device [1043:8324] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at ec00 [size=128] Capabilities: <access denied> Kernel driver in use: ATL1E ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-686-pae depends on: ii debconf [debconf-2.0] 1.5.45 ii initramfs-tools [linux-initramfs-tool] 0.106 ii kmod 9-1 ii linux-base 3.5 ii module-init-tools 9-1 Versions of packages linux-image-3.2.0-3-686-pae recommends: ii firmware-linux-free 3.1 ii libc6-i686 2.13-34 Versions of packages linux-image-3.2.0-3-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-22.1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-3-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae: true linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae: false linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
