Package: libatasmart4
Version: 0.19-1
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to get SMART data refreshed at regular intervals
* What exactly did you do (or not do) that was effective (or
ineffective)?
udisks --ata-smart-refresh /dev/sdb
* What was the outcome of this action?
udisks --ata-smart-refresh /dev/sdb
Refreshing ATA SMART data failed: Device does not support ATA SMART
* What outcome did you expect instead?
Showing information for /org/freedesktop/UDisks/devices/sdb
etc.
smartctl -a /dev/sdb reports SMART data just fine. Here is the
output of 'hdparm -I /dev/sdb | grep SMART':
SMART feature set
SMART error logging
SMART self-test
SMART Command Transport (SCT) feature set
Attached is the full hdparm output.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.32-interatom (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages libatasmart4 depends on:
ii libc6 2.13-35
ii libudev0 175-7
ii multiarch-support 2.13-35
libatasmart4 recommends no packages.
libatasmart4 suggests no packages.
-- no debconf information
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD20EARS-00MVWB0
Serial Number: WD-WCAZA8642245
Firmware Revision: 51.0AB51
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev
2.5, SATA Rev 2.6
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 3907029168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 1907729 MBytes
device size with M = 1000*1000: 2000398 MBytes (2000 GB)
cache/buffer size = unknown
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
DMA: *mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
388min for SECURITY ERASE UNIT. 388min for ENHANCED SECURITY ERASE
UNIT.
Logical Unit WWN Device Identifier: 50014ee2061774f7
NAA : 5
IEEE OUI : 0014ee
Unique ID : 2061774f7
Checksum: correct
