I've seen this, too. As a workaround, you can switch to windowed mode with alt-enter just before exiting.
The problem is it only happens sometimes, and you can't use the workaround when you know it has happened... Thanks, Bas On 16-01-13 21:50, shirish शिरीष wrote: > Package: freedink > Version: 1.08.20120427-2.1 > Severity: normal > > Dear Maintainer, > I was trying to run freedink and the moment I exited and got dumped to > a 640x480 screen. The following is the output on the console :- > > $ freedink > X Error of failed request: BadValue (integer parameter out of range > for operation) > Major opcode of failed request: 129 (XFree86-VidModeExtension) > Minor opcode of failed request: 10 (XF86VidModeSwitchToMode) > Value in failed request: 0x5000003 > Serial number of failed request: 254 > Current serial number in output stream: 256 > > These are all the valid resolutions on my display :- > > $ sudo xrandr > [sudo] password for shirish: > Screen 0: minimum 320 x 200, current 1600 x 900, maximum 4096 x 4096 > VGA1 connected 1600x900+0+0 (normal left inverted right x axis y axis) > 443mm x 249mm > 1600x900 60.0*+ > 1400x1050 60.0 > 1280x1024 75.0 60.0 > 1440x900 59.9 > 1280x800 59.8 > 1152x864 75.0 > 1024x768 75.1 70.1 60.0 > 832x624 74.6 > 800x600 72.2 75.0 60.3 56.2 > 640x480 72.8 75.0 66.7 60.0 > 720x400 70.1 > > -- System Information: > Debian Release: 7.0 > APT prefers testing > APT policy: (500, 'testing'), (500, 'stable'), (10, 'unstable'), (1, > 'experimental') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) > Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages freedink depends on: > ii freedink-dfarc 3.10-1.1 > ii freedink-engine 1.08.20120427-2.1 -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
