Control: severity -1 serious
Control: retitle -1 stevedore: FTBFS due to missing Build-Deps on
python-{mock,nose,setuptools}
Control: tags -1 patchOn 2013-01-28 13:13:37, Adam Gandelman wrote: > This package attempts to run the test suite at build time but > d/control does not contain the required Build-Depends to actually > run it. Please find the attached debdiff applied to stevedore > 0.8-1, which adds python-mock + python-nose and allows the package > to build in clean environments/schroots. Unfortunately the patch is not enough. stevedore also fails to build in a chroot without internet access due to the missing Build-Depends on python-setuptools. An updated patch is attached. I'm also raising the severity since it clearly fails to build in a clean environment. Regards -- Sebastian Ramacher
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on earth.ramacher.at ╔══════════════════════════════════════════════════════════════════════════════╗ ║ stevedore 0.8-2 (amd64) 29 Jan 2013 10:46 ║ ╚══════════════════════════════════════════════════════════════════════════════╝ Package: stevedore Version: 0.8-2 Source Version: 0.8-2 Distribution: unstable Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 I: NOTICE: Log filtering will replace 'build/stevedore-xtXAUc/stevedore-0.8' with '«PKGBUILDDIR»' I: NOTICE: Log filtering will replace 'build/stevedore-xtXAUc' with '«BUILDDIR»' I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/unstable-amd64-sbuild-4c5f6df9-f7c7-4257-8f77-ca3eb1da6e09' with '«CHROOT»' ┌──────────────────────────────────────────────────────────────────────────────┐ │ Update chroot │ └──────────────────────────────────────────────────────────────────────────────┘ Get:1 http://http.debian.net unstable InRelease [228 kB] Get:2 http://http.debian.net unstable/main Sources [6501 kB] Get:3 http://http.debian.net unstable/main amd64 Packages [6248 kB] Fetched 13.0 MB in 5s (2188 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ┌──────────────────────────────────────────────────────────────────────────────┐ │ Fetch source files │ └──────────────────────────────────────────────────────────────────────────────┘ Local sources ───────────── stevedore_0.8-2.dsc exists in /tmp; copying to chroot Check arch ────────── Merged Build-Depends: build-essential, fakeroot Filtered Build-Depends: build-essential, fakeroot dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-142JOs/apt_archive/sbuild-build-depends-core-dummy.deb'. OK Reading package lists... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install core build dependencies (apt-based resolver) │ └──────────────────────────────────────────────────────────────────────────────┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: sbuild-build-depends-core-dummy debconf: delaying package configuration, since apt-utils is not installed 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/720 B of archives. After this operation, 0 B of additional disk space will be used. Selecting previously unselected package sbuild-build-depends-core-dummy. (Reading database ... 10952 files and directories currently installed.) Unpacking sbuild-build-depends-core-dummy (from .../sbuild-build-depends-core-dummy.deb) ... Setting up sbuild-build-depends-core-dummy (0.invalid.0) ... Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 8.0.0), python | python-all | python-dev | python-all-dev, python-mock, python-nose Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 8.0.0), python, python-mock, python-nose dpkg-deb: building package `sbuild-build-depends-stevedore-dummy' in `/«BUILDDIR»/resolver-Ce1g9B/apt_archive/sbuild-build-depends-stevedore-dummy.deb'. OK Reading package lists... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install stevedore build dependencies (apt-based resolver) │ └──────────────────────────────────────────────────────────────────────────────┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libasprintf-dev libasprintf0c2 libcroco3 libexpat1 libffi5 libgettextpo-dev libgettextpo0 libglib2.0-0 libmagic1 libncursesw5 libpcre3 libpipeline1 libsqlite3-0 libssl1.0.0 libunistring0 libxml2 man-db mime-support po-debconf python python-minimal python-mock python-nose python-pkg-resources python2.6 python2.6-minimal python2.7 python2.7-minimal Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff less www-browser libmail-box-perl python-doc python-tk python-mock-doc python-coverage python-nose-doc python-distribute python-distribute-doc python2.6-doc binfmt-support python2.7-doc Recommended packages: curl wget lynx-cur autopoint libglib2.0-data shared-mime-info libgpm2 xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libasprintf-dev libasprintf0c2 libcroco3 libexpat1 libffi5 libgettextpo-dev libgettextpo0 libglib2.0-0 libmagic1 libncursesw5 libpcre3 libpipeline1 libsqlite3-0 libssl1.0.0 libunistring0 libxml2 man-db mime-support po-debconf python python-minimal python-mock python-nose python-pkg-resources python2.6 python2.6-minimal python2.7 python2.7-minimal sbuild-build-depends-stevedore-dummy debconf: delaying package configuration, since apt-utils is not installed 0 upgraded, 37 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/20.2 MB of archives. After this operation, 60.5 MB of additional disk space will be used. Selecting previously unselected package libncursesw5:amd64. (Reading database ... 10952 files and directories currently installed.) Unpacking libncursesw5:amd64 (from .../libncursesw5_5.9-10_amd64.deb) ... Selecting previously unselected package libpipeline1:amd64. Unpacking libpipeline1:amd64 (from .../libpipeline1_1.2.2-1_amd64.deb) ... Selecting previously unselected package libssl1.0.0:amd64. Unpacking libssl1.0.0:amd64 (from .../libssl1.0.0_1.0.1c-4_amd64.deb) ... Selecting previously unselected package groff-base. Unpacking groff-base (from .../groff-base_1.22.1-2_amd64.deb) ... Selecting previously unselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_9.0.4_amd64.deb) ... Selecting previously unselected package man-db. Unpacking man-db (from .../man-db_2.6.3-3_amd64.deb) ... Selecting previously unselected package libasprintf0c2:amd64. Unpacking libasprintf0c2:amd64 (from .../libasprintf0c2_0.18.1.1-10_amd64.deb) ... Selecting previously unselected package libmagic1:amd64. Unpacking libmagic1:amd64 (from .../libmagic1_5.11-2_amd64.deb) ... Selecting previously unselected package libpcre3:amd64. Unpacking libpcre3:amd64 (from .../libpcre3_1%3a8.31-2_amd64.deb) ... Selecting previously unselected package libsqlite3-0:amd64. Unpacking libsqlite3-0:amd64 (from .../libsqlite3-0_3.7.15.2-1_amd64.deb) ... Selecting previously unselected package libxml2:amd64. Unpacking libxml2:amd64 (from .../libxml2_2.8.0+dfsg1-7_amd64.deb) ... Selecting previously unselected package libffi5:amd64. Unpacking libffi5:amd64 (from .../libffi5_3.0.10-3_amd64.deb) ... Selecting previously unselected package libglib2.0-0:amd64. Unpacking libglib2.0-0:amd64 (from .../libglib2.0-0_2.33.12+really2.32.4-5_amd64.deb) ... Selecting previously unselected package libcroco3:amd64. Unpacking libcroco3:amd64 (from .../libcroco3_0.6.6-2_amd64.deb) ... Selecting previously unselected package libexpat1:amd64. Unpacking libexpat1:amd64 (from .../libexpat1_2.1.0-1_amd64.deb) ... Selecting previously unselected package libunistring0:amd64. Unpacking libunistring0:amd64 (from .../libunistring0_0.9.3-5_amd64.deb) ... Selecting previously unselected package libgettextpo0:amd64. Unpacking libgettextpo0:amd64 (from .../libgettextpo0_0.18.1.1-10_amd64.deb) ... Selecting previously unselected package file. Unpacking file (from .../archives/file_5.11-2_amd64.deb) ... Selecting previously unselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-10_amd64.deb) ... Selecting previously unselected package mime-support. Unpacking mime-support (from .../mime-support_3.52-2_all.deb) ... Selecting previously unselected package python2.7-minimal. Unpacking python2.7-minimal (from .../python2.7-minimal_2.7.3-6_amd64.deb) ... Selecting previously unselected package python2.7. Unpacking python2.7 (from .../python2.7_2.7.3-6_amd64.deb) ... Selecting previously unselected package python-minimal. Unpacking python-minimal (from .../python-minimal_2.7.3-3_all.deb) ... Selecting previously unselected package python. Unpacking python (from .../python_2.7.3-3_all.deb) ... Selecting previously unselected package python2.6-minimal. Unpacking python2.6-minimal (from .../python2.6-minimal_2.6.8-1.1_amd64.deb) ... Selecting previously unselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_amd64.deb) ... Selecting previously unselected package libasprintf-dev:amd64. Unpacking libasprintf-dev:amd64 (from .../libasprintf-dev_0.18.1.1-10_amd64.deb) ... Selecting previously unselected package libgettextpo-dev:amd64. Unpacking libgettextpo-dev:amd64 (from .../libgettextpo-dev_0.18.1.1-10_amd64.deb) ... Selecting previously unselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-10_amd64.deb) ... Selecting previously unselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously unselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2_all.deb) ... Selecting previously unselected package debhelper. Unpacking debhelper (from .../debhelper_9.20120909_all.deb) ... Selecting previously unselected package python-pkg-resources. Unpacking python-pkg-resources (from .../python-pkg-resources_0.6.24-1_all.deb) ... Selecting previously unselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.8-1.1_amd64.deb) ... Selecting previously unselected package python-nose. Unpacking python-nose (from .../python-nose_1.1.2-3_all.deb) ... Selecting previously unselected package python-mock. Unpacking python-mock (from .../python-mock_0.8.0-3_all.deb) ... Selecting previously unselected package sbuild-build-depends-stevedore-dummy. Unpacking sbuild-build-depends-stevedore-dummy (from .../sbuild-build-depends-stevedore-dummy.deb) ... Setting up libncursesw5:amd64 (5.9-10) ... Setting up libpipeline1:amd64 (1.2.2-1) ... Setting up libssl1.0.0:amd64 (1.0.1c-4) ... Setting up groff-base (1.22.1-2) ... Setting up bsdmainutils (9.0.4) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up man-db (2.6.3-3) ... Building database of manual pages ... Setting up libasprintf0c2:amd64 (0.18.1.1-10) ... Setting up libmagic1:amd64 (5.11-2) ... Setting up libpcre3:amd64 (1:8.31-2) ... Setting up libsqlite3-0:amd64 (3.7.15.2-1) ... Setting up libxml2:amd64 (2.8.0+dfsg1-7) ... Setting up libffi5:amd64 (3.0.10-3) ... Setting up libglib2.0-0:amd64 (2.33.12+really2.32.4-5) ... No schema files found: doing nothing. Setting up libcroco3:amd64 (0.6.6-2) ... Setting up libexpat1:amd64 (2.1.0-1) ... Setting up libunistring0:amd64 (0.9.3-5) ... Setting up libgettextpo0:amd64 (0.18.1.1-10) ... Setting up file (5.11-2) ... Setting up gettext-base (0.18.1.1-10) ... Setting up mime-support (3.52-2) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode Setting up python2.7-minimal (2.7.3-6) ... Setting up python2.7 (2.7.3-6) ... Setting up python-minimal (2.7.3-3) ... Setting up python (2.7.3-3) ... Setting up python2.6-minimal (2.6.8-1.1) ... Setting up html2text (1.3.2a-15) ... Setting up libasprintf-dev:amd64 (0.18.1.1-10) ... Setting up libgettextpo-dev:amd64 (0.18.1.1-10) ... Setting up gettext (0.18.1.1-10) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu2) ... Setting up debhelper (9.20120909) ... Setting up python-pkg-resources (0.6.24-1) ... Setting up python2.6 (2.6.8-1.1) ... Setting up python-nose (1.1.2-3) ... Setting up python-mock (0.8.0-3) ... Setting up sbuild-build-depends-stevedore-dummy (0.invalid.0) ... ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build environment │ └──────────────────────────────────────────────────────────────────────────────┘ Kernel: Linux 3.7-trunk-amd64 amd64 (x86_64) Toolchain package versions: binutils_2.22-7.1 dpkg-dev_1.16.9 g++-4.7_4.7.2-5 gcc-4.7_4.7.2-5 libc6-dev_2.13-38 libstdc++6_4.7.2-5 libstdc++6-4.7-dev_4.7.2-5 linux-libc-dev_3.2.35-2 Package versions: apt_0.9.7.7 base-files_7.1 base-passwd_3.5.26 bash_4.2+dfsg-0.1 binutils_2.22-7.1 bsdmainutils_9.0.4 bsdutils_1:2.20.1-5.3 build-essential_11.6 bzip2_1.0.6-4 ccache_3.1.9-1 coreutils_8.20-3 cpp_4:4.7.2-1 cpp-4.7_4.7.2-5 dash_0.5.7-3 debconf_1.5.49 debconf-i18n_1.5.49 debfoster_2.7-1.2 debhelper_9.20120909 debian-archive-keyring_2012.4 debianutils_4.3.4 diffutils_1:3.2-7 dpkg_1.16.9 dpkg-dev_1.16.9 e2fslibs_1.42.5-1 e2fsprogs_1.42.5-1 fakeroot_1.18.4-2 file_5.11-2 findutils_4.4.2-5 g++_4:4.7.2-1 g++-4.7_4.7.2-5 gcc_4:4.7.2-1 gcc-4.5-base_4.5.4-1 gcc-4.6-base_4.6.3-15 gcc-4.7_4.7.2-5 gcc-4.7-base_4.7.2-5 gettext_0.18.1.1-10 gettext-base_0.18.1.1-10 gnupg_1.4.12-7 gpgv_1.4.12-7 grep_2.14-1 groff-base_1.22.1-2 gzip_1.5-1.1 hostname_3.12 html2text_1.3.2a-15 initscripts_2.88dsf-39 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 libacl1_2.2.51-8 libapt-pkg4.12_0.9.7.7 libasprintf-dev_0.18.1.1-10 libasprintf0c2_0.18.1.1-10 libattr1_1:2.4.46-8 libblkid1_2.20.1-5.3 libbz2-1.0_1.0.6-4 libc-bin_2.13-38 libc-dev-bin_2.13-38 libc6_2.13-38 libc6-dev_2.13-38 libclass-isa-perl_0.36-5 libcomerr2_1.42.5-1 libcroco3_0.6.6-2 libdb5.1_5.1.29-5 libdpkg-perl_1.16.9 libexpat1_2.1.0-1 libffi5_3.0.10-3 libfile-fcntllock-perl_0.14-2 libgc1c2_1:7.1-9.1 libgcc1_1:4.7.2-5 libgdbm3_1.8.3-11 libgettextpo-dev_0.18.1.1-10 libgettextpo0_0.18.1.1-10 libglib2.0-0_2.33.12+really2.32.4-5 libgmp10_2:5.0.5+dfsg-2 libgomp1_4.7.2-5 libitm1_4.7.2-5 liblocale-gettext-perl_1.05-7+b1 liblzma5_5.1.1alpha+20120614-2 libmagic1_5.11-2 libmount1_2.20.1-5.3 libmpc2_0.9-4 libmpfr4_3.1.0-5 libncurses5_5.9-10 libncursesw5_5.9-10 libpam-modules_1.1.3-7.1 libpam-modules-bin_1.1.3-7.1 libpam-runtime_1.1.3-7.1 libpam0g_1.1.3-7.1 libpcre3_1:8.31-2 libpipeline1_1.2.2-1 libquadmath0_4.7.2-5 libreadline6_6.2+dfsg-0.1 libselinux1_2.1.9-5 libsemanage-common_2.1.6-6 libsemanage1_2.1.6-6 libsepol1_2.1.4-3 libslang2_2.2.4-15 libsqlite3-0_3.7.15.2-1 libss2_1.42.5-1 libssl1.0.0_1.0.1c-4 libstdc++6_4.7.2-5 libstdc++6-4.7-dev_4.7.2-5 libswitch-perl_2.16-2 libtext-charwidth-perl_0.04-7+b1 libtext-iconv-perl_1.7-5 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_1.2000-1 libtinfo5_5.9-10 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-23+nmu1 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.3 libxml2_2.8.0+dfsg1-7 linux-libc-dev_3.2.35-2 login_1:4.1.5.1-1 lsb-base_4.1+Debian9 make_3.81-8.2 man-db_2.6.3-3 mawk_1.3.3-17 mime-support_3.52-2 mount_2.20.1-5.3 multiarch-support_2.13-38 ncurses-base_5.9-10 ncurses-bin_5.9-10 passwd_1:4.1.5.1-1 patch_2.6.1-3 perl_5.14.2-17 perl-base_5.14.2-17 perl-modules_5.14.2-17 po-debconf_1.0.16+nmu2 python_2.7.3-3 python-minimal_2.7.3-3 python-mock_0.8.0-3 python-nose_1.1.2-3 python-pkg-resources_0.6.24-1 python2.6_2.6.8-1.1 python2.6-minimal_2.6.8-1.1 python2.7_2.7.3-6 python2.7-minimal_2.7.3-6 readline-common_6.2+dfsg-0.1 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-stevedore-dummy_0.invalid.0 sed_4.2.1-10 sensible-utils_0.0.7 sysv-rc_2.88dsf-39 sysvinit_2.88dsf-39 sysvinit-utils_2.88dsf-39 tar_1.26+dfsg-0.1 tzdata_2012j-1 util-linux_2.20.1-5.3 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.7.dfsg-13 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build │ └──────────────────────────────────────────────────────────────────────────────┘ Unpack source ───────────── dpkg-source: warning: extracting unsigned source package (stevedore_0.8-2.dsc) dpkg-source: info: extracting stevedore in stevedore-0.8 dpkg-source: info: unpacking stevedore_0.8.orig.tar.gz dpkg-source: info: unpacking stevedore_0.8-2.debian.tar.gz Check disc space ──────────────── Sufficient free space for build User Environment ──────────────── CCACHE_DIR=/ccache DEB_BUILD_OPTIONS=parallel=3 HOME=/sbuild-nonexistent LOGNAME=sebastian PATH=/usr/local/sbin:/usr/local/bin:/usr/lib/ccache:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin:/usr/games SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=100 SCHROOT_GROUP=users SCHROOT_SESSION_ID=unstable-amd64-sbuild-4c5f6df9-f7c7-4257-8f77-ca3eb1da6e09 SCHROOT_UID=1000 SCHROOT_USER=sebastian SHELL=/bin/sh TERM=screen-256color USER=sebastian dpkg-buildpackage ───────────────── dpkg-buildpackage: source package stevedore dpkg-buildpackage: source version 0.8-2 dpkg-buildpackage: source changed by Adam Gandelman <[email protected]> dpkg-source --before-build stevedore-0.8 dpkg-buildpackage: host architecture amd64 fakeroot debian/rules clean dh clean --with=python2 dh_testdir dh_auto_clean Downloading http://pypi.python.org/packages/source/d/distribute/distribute-0.6.10.tar.gz Traceback (most recent call last): File "setup.py", line 5, in <module> distribute_setup.use_setuptools() File "/«PKGBUILDDIR»/distribute_setup.py", line 165, in use_setuptools download_delay) File "/«PKGBUILDDIR»/distribute_setup.py", line 124, in _do_download to_dir, download_delay) File "/«PKGBUILDDIR»/distribute_setup.py", line 193, in download_setuptools src = urlopen(url) File "/usr/lib/python2.6/urllib2.py", line 126, in urlopen return _opener.open(url, data, timeout) File "/usr/lib/python2.6/urllib2.py", line 391, in open response = self._open(req, data) File "/usr/lib/python2.6/urllib2.py", line 409, in _open '_open', req) File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 1184, in http_open return self.do_open(httplib.HTTPConnection, req) File "/usr/lib/python2.6/urllib2.py", line 1159, in do_open raise URLError(err) urllib2.URLError: <urlopen error [Errno 111] Connection refused> dh_auto_clean: python2.6 setup.py clean -a returned exit code 1 make: *** [clean] Error 1 dpkg-buildpackage: error: fakeroot debian/rules clean gave error exit status 2 ──────────────────────────────────────────────────────────────────────────────── Build finished at 20130129-1047 Finished ──────── E: Build failure (dpkg-buildpackage died) ┌──────────────────────────────────────────────────────────────────────────────┐ │ Cleanup │ └──────────────────────────────────────────────────────────────────────────────┘ Purging /«BUILDDIR» Not cleaning session: cloned chroot in use ┌──────────────────────────────────────────────────────────────────────────────┐ │ Summary │ └──────────────────────────────────────────────────────────────────────────────┘ Build Architecture: amd64 Build-Space: 252 Build-Time: 1 Distribution: unstable Fail-Stage: build Host Architecture: amd64 Install-Time: 11 Job: /tmp/stevedore_0.8-2.dsc Machine Architecture: amd64 Package: stevedore Package-Time: 24 Source-Version: 0.8-2 Space: 252 Status: attempted Version: 0.8-2 ──────────────────────────────────────────────────────────────────────────────── Finished at 20130129-1047 Build needed 00:00:24, 252k disc space
diff -Nru stevedore-0.8/debian/changelog stevedore-0.8/debian/changelog --- stevedore-0.8/debian/changelog 2013-01-07 06:50:48.000000000 -0800 +++ stevedore-0.8/debian/changelog 2013-01-28 12:46:50.000000000 -0800 @@ -1,3 +1,9 @@ +stevedore (0.8-2) unstable; urgency=low + + * debian/control: Add python-mock, python-nose to Build-Depends. + + -- Adam Gandelman <[email protected]> Mon, 28 Jan 2013 12:44:42 -0800 + stevedore (0.8-1) unstable; urgency=low * New upstrem release diff -Nru stevedore-0.8/debian/control stevedore-0.8/debian/control --- stevedore-0.8/debian/control 2013-01-07 06:25:16.000000000 -0800 +++ stevedore-0.8/debian/control 2013-01-28 12:46:26.000000000 -0800 @@ -2,7 +2,10 @@ Section: python Priority: extra Maintainer: Julien Danjou <[email protected]> -Build-Depends: debhelper (>= 8.0.0), python | python-all | python-dev | python-all-dev +Build-Depends: debhelper (>= 8.0.0), + python | python-all | python-dev | python-all-dev, + python-mock, + python-nose Standards-Version: 3.9.3 Homepage: https://github.com/dreamhost/stevedore Vcs-Git: git://git.debian.org/collab-maint/stevedore.git
signature.asc
Description: Digital signature
