Package: installation-reports Debian-installer-version: http://amd64.debian.net/debian-installer/2005-10-26/netboot/mini.iso uname -a: Linux mobil 2.6.12-1-amd64-generic #1 Wed Sep 28 02:05:15 CEST 2005 x86_64 unknown Date: 26:10:2005 21:00 CEST Method: Network installation based on mini.iso CD-Image
Machine: HP NX6125 Processor: AMD Turion ML-34 1.8GHz Memory: 1GB Root Device: IDE /dev/hda Root Size/partition table: 1. fdisk: Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 3824 30716248+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/hda2 3825 3840 128520 83 Linux /dev/hda3 3841 4083 1951897+ 82 Linux swap / Solaris /dev/hda4 4084 9729 45351495 83 Linux 2. fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda4 / ext3 defaults,errors=remount-ro 0 1 /dev/hda2 /boot ext3 defaults 0 2 /dev/hda3 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 01) 0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 0000:00:04.0 PCI bridge: ATI Technologies Inc: Unknown device 5a36 0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37 0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 11) 0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376 0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device 4370 (rev 02) 0000:00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5955 0000:02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 0000:02:02.0 Network controller: Broadcom Corporation: Unknown device 4318 (rev 02) 0000:02:04.0 CardBus bridge: Texas Instruments: Unknown device 8031 0000:02:04.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 0000:02:04.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033 0000:02:04.4 0805: Texas Instruments: Unknown device 8034 0000:00:00.0 0600: 1002:5950 (rev 01) 0000:00:01.0 0604: 1002:5a3f 0000:00:04.0 0604: 1002:5a36 0000:00:05.0 0604: 1002:5a37 0000:00:13.0 0c03: 1002:4374 0000:00:13.1 0c03: 1002:4375 0000:00:13.2 0c03: 1002:4373 0000:00:14.0 0c05: 1002:4372 (rev 11) 0000:00:14.1 0101: 1002:4376 0000:00:14.3 0601: 1002:4377 0000:00:14.4 0604: 1002:4371 0000:00:14.5 0401: 1002:4370 (rev 02) 0000:00:14.6 0703: 1002:4378 (rev 02) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:05.0 0300: 1002:5955 0000:02:01.0 0200: 14e4:169c (rev 03) 0000:02:02.0 0280: 14e4:4318 (rev 02) 0000:02:04.0 0607: 104c:8031 0000:02:04.2 0c00: 104c:8032 0000:02:04.3 0180: 104c:8033 0000:02:04.4 0805: 104c:8034 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O ] Configure network HW: [O ] Config network: [ O] Detect CD: [ -] -> Select Mirror: [O] Load installer modules: [ O] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [ O] Mount partitions: [ O] Install base system: [E ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Break of base system installation after approximately 65%. Last message on console 3 and /var/log/messages: Setting up base-config (2.73)... . No further messages or information. fdisk, fstab, lspci and lspci -n information based on successfull installation of Lennart Sorensens sarge-amd64-2.6.12-netinst on the same machine. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
