Package: src:linux Version: 3.9.5-1 Severity: important Tags: patch I wasn't sure which package this goes to, since it happens on multiple versions of packages and the latest linux kernel.
After more testing, I found that without my patch to remove 2 lines of code, both of my marvell might repeatedly go up and down several times, then it might stay up as 100 Mbit only, when it should be gigabit. At one time it never went up until I unplug and re-plug in. Then it eventually kernel panics after replug about 50 times. This problem also happens on a package of linux-image-3.2.0-4-amd64, and on the latest kernel (I used apt-get source linux also) With my patch to remove 2 lines in sky2.c in "sky2_link_down" I no longer have any repeated going down and up several times, I never see it go down to 100 Mbps, and no longer kernel panics. -- Package-specific info: ** Version: Linux version 3.9-1-amd64 ([email protected]) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.9.5-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=828cdbc2-c747-4845-afdc-ac00888094e4 ro quiet ** Not tainted ** Kernel log: [ 5.900082] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.900140] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 5.900197] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 5.959315] Console: switching to colour frame buffer device 128x48 [ 5.961591] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 5.961593] radeon 0000:01:00.0: registered panic notifier [ 5.961597] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 [ 5.961693] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 5.961742] snd_hda_intel 0000:01:00.1: irq 86 for MSI/MSI-X [ 6.004738] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 6.261778] cfg80211: World regulatory domain updated: [ 6.261780] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.261782] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.261784] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.261786] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.261787] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.261788] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.264849] Adding 7176268k swap on /dev/sda4. Priority:-1 extents:1 across:7176268k [ 8.275299] EXT4-fs (sda2): re-mounted. Opts: (null) [ 8.649668] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 8.844030] loop: module loaded [ 33.523313] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 33.702494] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 34.133679] ip_tables: (C) 2000-2006 Netfilter Core Team [ 34.186779] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 34.472583] Bridge firewalling registered [ 34.474884] device eth1 entered promiscuous mode [ 34.482273] 8139too 0000:07:06.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 34.482938] device eth2 entered promiscuous mode [ 34.485516] sky2 0000:08:00.0 eth2: enabling interface [ 34.485570] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 34.486089] device eth3 entered promiscuous mode [ 34.488589] sky2 0000:06:00.0 eth3: enabling interface [ 34.488631] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 34.489475] device eth4 entered promiscuous mode [ 34.506442] r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168f-1.fw into memory [ 34.609836] r8169 0000:02:00.0 eth4: link down [ 34.609866] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready [ 34.614956] br0: port 1(eth1) entered forwarding state [ 34.614962] br0: port 1(eth1) entered forwarding state [ 35.250923] 8139too 0000:07:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 36.020959] RPC: Registered named UNIX socket transport module. [ 36.020962] RPC: Registered udp transport module. [ 36.020963] RPC: Registered tcp transport module. [ 36.020964] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.048556] FS-Cache: Loaded [ 36.056940] Key type dns_resolver registered [ 36.089967] FS-Cache: Netfs 'nfs' registered for caching [ 36.124464] r8169 0000:02:00.0 eth4: link up [ 36.124471] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready [ 36.124955] br0: port 4(eth4) entered forwarding state [ 36.124958] br0: port 4(eth4) entered forwarding state [ 36.132697] Installing knfsd (copyright (C) 1996 [email protected]). [ 36.928489] sky2 0000:06:00.0 eth3: Link is up at 1000 Mbps, full duplex, flow control rx [ 36.928499] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 36.928513] br0: port 3(eth3) entered forwarding state [ 36.928516] br0: port 3(eth3) entered forwarding state [ 37.483863] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'. [ 37.503876] rt2800pci 0000:05:00.0: firmware: agent loaded rt2860.bin into memory [ 37.503880] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34. [ 37.547750] device wlan0 entered promiscuous mode [ 37.547843] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.547846] br0: port 5(wlan0) entered forwarding state [ 37.547849] br0: port 5(wlan0) entered forwarding state [ 37.547874] cfg80211: Calling CRDA for country: US [ 37.579714] cfg80211: Regulatory domain changed to country: US [ 37.579717] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 37.579719] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 37.579720] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 37.579722] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.579723] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.579725] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.579726] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 37.656452] 8021q: 802.1Q VLAN Support v1.8 [ 37.664405] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.347022] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead. [ 38.636188] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 44.017080] Bluetooth: Core ver 2.16 [ 44.017098] NET: Registered protocol family 31 [ 44.017100] Bluetooth: HCI device and connection manager initialized [ 44.017107] Bluetooth: HCI socket layer initialized [ 44.017110] Bluetooth: L2CAP socket layer initialized [ 44.017116] Bluetooth: SCO socket layer initialized [ 44.031587] Bluetooth: RFCOMM TTY layer initialized [ 44.031595] Bluetooth: RFCOMM socket layer initialized [ 44.031597] Bluetooth: RFCOMM ver 1.11 [ 44.204695] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 44.204698] Bluetooth: BNEP filters: protocol multicast [ 44.204705] Bluetooth: BNEP socket layer initialized [ 44.698566] lp: driver loaded but no devices found [ 45.083134] ppdev: user-space parallel port driver [ 47.449915] sky2 0000:08:00.0 eth2: Link is up at 100 Mbps, full duplex, flow control both [ 47.449932] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 47.449956] br0: port 2(eth2) entered forwarding state [ 47.449969] br0: port 2(eth2) entered forwarding state [ 49.663214] br0: port 1(eth1) entered forwarding state [ 51.169601] br0: port 4(eth4) entered forwarding state [ 52.002944] br0: port 3(eth3) entered forwarding state [ 52.579888] br0: port 5(wlan0) entered forwarding state [ 62.515779] br0: port 2(eth2) entered forwarding state ** Model information sys_vendor: To be filled by O.E.M. product_name: To be filled by O.E.M. product_version: To be filled by O.E.M. chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: 1708 board_vendor: ASUSTeK COMPUTER INC. board_name: M5A97 R2.0 board_version: Rev 1.xx ** Loaded modules: parport_pc ppdev lp parport bnep rfcomm bluetooth cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace 8021q garp binfmt_misc uinput nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc bridge stp llc ipt_MASQUERADE xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter iptable_mangle iptable_raw iptable_security ip_tables x_tables nls_utf8 nls_cp437 vfat fat loop firewire_sbp2 firewire_core crc_itu_t snd_hda_codec_hdmi arc4 snd_hda_codec_realtek rt2800pci rt2800lib rt2x00pci rt2x00mmio rt2x00lib mac80211 radeon snd_hda_intel cfg80211 snd_hda_codec mperf ttm drm_kms_helper kvm_amd snd_hwdep snd_pcm_oss snd_mixer_oss drm snd_pcm eeepc_wmi asus_wmi edac_mce_amd snd_page_alloc sparse_keymap sp5100_tco video snd_seq_midi rfkill snd_seq_midi_event i2c_piix4 i2c_algo_bit crc_ccitt processor edac_core eeprom_93cx6 kvm k10temp fam15h_power thermal_sys mxm_wmi snd_rawmidi pcspkr i2c_core snd_seq crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 ablk_helper cryptd snd_seq_device snd_timer xts lrw snd wmi button soundcore evdev gf128mul ext4 crc16 jbd2 mbcache hid_generic usbhid hid sg sd_mod crc_t10dif ahci libahci libata scsi_mod 8139too 8139cp ehci_pci microcode ohci_hcd ehci_hcd sky2 xhci_hcd r8169 mii usbcore usb_common ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo br0 iface lo inet loopback ## from http://wiki.debian.org/BridgeNetworkConnections#Setting_up_your_Bridge # The primary network interface auto eth0 iface eth0 inet dhcp dns-nameservers 208.67.222.222 8.8.8.8 #iface eth0 inet static # address 192.168.0.2 # broadcast 192.168.0.255 # netmask 255.255.255.0 # gateway 192.168.0.1 # dns-nameservers 208.67.222.222 8.8.8.8 # Set up interfaces manually, avoiding conflicts with, e.g., network manager iface eth1 inet manual iface eth2 inet manual iface eth3 inet manual iface eth4 inet manual iface eth5 inet manual iface wlan0 inet manual # Bridge setup # iface br0 inet dhcp # bridge_ports eth1 eth2 eth3 # Bridge setup iface br0 inet static bridge_ports eth1 eth2 eth3 eth4 eth5 wlan0 address 192.168.3.1 broadcast 192.168.3.255 netmask 255.255.255.0 # gateway 192.168.3.1 # dns-nameservers 208.67.222.222 8.8.8.8 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000 link/ether 60:a4:4c:5a:ce:e4 brd ff:ff:ff:ff:ff:ff 3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000 link/ether 00:50:43:01:2c:e0 brd ff:ff:ff:ff:ff:ff 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000 link/ether 00:50:43:01:2e:51 brd ff:ff:ff:ff:ff:ff 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:e0:4d:30:4a:02 brd ff:ff:ff:ff:ff:ff inet 208.107.22.163/23 brd 208.107.23.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::2e0:4dff:fe30:4a02/64 scope link valid_lft forever preferred_lft forever 6: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UNKNOWN qlen 1000 link/ether 00:e0:4d:30:51:fd brd ff:ff:ff:ff:ff:ff 7: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP qlen 1000 link/ether 00:22:43:65:56:9b brd ff:ff:ff:ff:ff:ff 8: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:22:43:65:56:9b brd ff:ff:ff:ff:ff:ff inet 192.168.3.1/24 brd 192.168.3.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::250:43ff:fe01:2ce0/64 scope link valid_lft forever preferred_lft forever 9: mon.wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 1000 link/ieee802.11/radiotap 00:22:43:65:56:9b brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed br0: 83055 682 0 0 0 0 0 0 88545 466 0 0 0 0 0 0 mon.wlan0: 402954 1679 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 1434935 3555 0 0 0 0 0 0 124795 929 0 0 0 0 0 0 eth1: 50395 294 0 0 0 0 0 0 108534 706 0 0 0 0 0 0 eth2: 153541713 2558684 0 0 0 0 0 205 81990115 1171063 0 0 0 0 0 0 eth3: 81971954 1170990 0 0 0 0 0 13 127985353 2558884 0 0 0 0 0 0 eth4: 0 0 0 0 0 0 0 0 58153 427 0 0 0 0 0 0 lo: 500 4 0 0 0 0 0 0 500 4 0 0 0 0 0 0 wlan0: 12068 135 0 0 0 0 0 0 77423 466 0 0 0 0 0 0 *** Protocol statistics: Ip: 1916 total packets received 18 with invalid headers 292 forwarded 0 incoming packets discarded 1459 incoming packets delivered 1300 requests sent out 45 dropped because of missing route Icmp: 50 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 50 24 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 6 time exceeded: 18 IcmpMsg: InType3: 50 OutType3: 6 OutType11: 18 Tcp: 5 active connections openings 1 passive connection openings 0 failed connection attempts 0 connection resets received 1 connections established 1031 segments received 653 segments send out 0 segments retransmited 0 bad segments received. 0 resets sent Udp: 434 packets received 6 packets to unknown port received. 0 packet receive errors 331 packets sent UdpLite: TcpExt: 12 delayed acks sent 1 packets directly queued to recvmsg prequeue. 1 bytes directly received in process context from prequeue 800 packet headers predicted 92 acknowledgments not containing data payload received TCPRcvCoalesce: 72 IpExt: InNoRoutes: 5 InMcastPkts: 54 OutMcastPkts: 59 InBcastPkts: 199 OutBcastPkts: 94 InOctets: 1373081 OutOctets: 240515 InMcastOctets: 16868 OutMcastOctets: 17076 InBcastOctets: 25649 OutBcastOctets: 10620 ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a1b] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: fe700000-fe7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe600000-fe6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:84dd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at f040 [size=8] Region 1: I/O ports at f030 [size=4] Region 2: I/O ports at f020 [size=8] Region 3: I/O ports at f010 [size=4] Region 4: I/O ports at f000 [size=16] Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: ASUSTeK Computer Inc. Device [1043:8444] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe500000-fe5fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fe400000-fe4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 23 Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: fam15h_power 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 7350] [1002:68fa] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device [174b:e153] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 85 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at e000 [size=256] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68] Subsystem: PC Partner Limited Device [174b:aa68] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 86 Region 0: Memory at fea40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 09) Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:8505] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 72 Region 0: I/O ports at d000 [size=256] Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8488] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8488] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 05:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:0781] Subsystem: Ralink corp. Device [1814:2790] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci 06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20) Subsystem: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 73 Region 0: Memory at fe620000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at c000 [size=256] Expansion ROM at fe600000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 07:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at b100 [size=256] Region 1: Memory at fe521000 (32-bit, non-prefetchable) [size=256] Expansion ROM at fe510000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 8139too 07:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at b000 [size=256] Region 1: Memory at fe520000 (32-bit, non-prefetchable) [size=256] Expansion ROM at fe500000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 8139too 08:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20) Subsystem: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 74 Region 0: Memory at fe420000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at a000 [size=256] Expansion ROM at fe400000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 ** USB devices: Bus 004 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 011 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (1010, 'testing'), (100, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.112 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.9-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.38 ii firmware-linux-nonfree 0.38 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.38 ii firmware-realtek 0.38 pn xen-hypervisor <none> -- debconf information: linux-image-3.9-1-amd64/postinst/ignoring-ramdisk: linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64: linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
