Package: src:linux Version: 3.9.6-1 Followup-For: Bug #713929 Dear Maintainer, *** Please consider answering these questions, where appropriate ***
* What led up to the situation? Upgrading kernel 3.2 of testing. * What exactly did you do (or not do) that was effective (or ineffective)? apt-get update && apt-get dist-upgrade. Turn on the laptop. * What was the outcome of this action? Fan don't work. Overheating * What outcome did you expect instead? Fan must work. I also provides you the acpi -V. On Kernel 3.2, on an, It's write 1/1... but on 3.9, 0/1... Adapter 0: on-line Thermal 0: ok, 76.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 108.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 105.0 degrees C Thermal 1: active, 80.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 256.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 80.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 72.0 degrees C Thermal 1: trip point 3 switches to mode active at temperature 60.0 degrees C Thermal 1: trip point 4 switches to mode active at temperature 45.0 degrees C Thermal 2: ok, 20.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 110.0 degrees C Thermal 3: ok, 20.0 degrees C Thermal 3: trip point 0 switches to mode critical at temperature 108.0 degrees C Thermal 3: trip point 1 switches to mode passive at temperature 60.0 degrees C Thermal 4: ok, 64.0 degrees C Thermal 4: trip point 0 switches to mode critical at temperature 105.0 degrees C Thermal 4: trip point 1 switches to mode passive at temperature 95.0 degrees C Cooling 0: LCD 0 of 10 Cooling 1: Processor 0 of 7 Cooling 2: Fan 0 of 1 Cooling 3: Fan 0 of 1 Cooling 4: Fan 0 of 1 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 -- Package-specific info: ** Version: Linux version 3.9-1-686-pae (debian-ker...@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-686-pae root=UUID=9905cccd-dd88-4114-8775-edb6a7cfcfa5 ro quiet ** Not tainted ** Kernel log: [ 6.021337] platform microcode: firmware: agent aborted loading intel-ucode/06-16-01 (not found?) [ 6.021828] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 6.242773] wmi: Mapper loaded [ 6.254760] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C003.C004.C0D3 1 (20130117/utaddress-251) [ 6.254769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.254774] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with Region \_SB_.C003.C004.C0E5 1 (20130117/utaddress-251) [ 6.254779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.254781] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with Region \_SB_.C003.C004.C0E5 1 (20130117/utaddress-251) [ 6.254786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.254788] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.278900] ACPI: AC Adapter [C23A] (on-line) [ 6.279507] ACPI: Battery Slot [C23B] (battery absent) [ 6.297016] iTCO_vendor_support: vendor-support=0 [ 6.333290] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.363323] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 6.363362] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 6.364651] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.419916] Monitor-Mwait will be used to enter C-1 state [ 6.420234] Monitor-Mwait will be used to enter C-2 state [ 6.420240] tsc: Marking TSC unstable due to TSC halts in idle [ 6.420248] ACPI: acpi_idle registered with cpuidle [ 6.426119] Switching to clocksource hpet [ 6.499626] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 6.706447] cfg80211: Calling CRDA to update world regulatory domain [ 6.721622] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6.784748] [drm] Initialized drm 1.1.0 20060810 [ 6.995737] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 7.036066] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1 [ 7.060237] Broadcom 43xx driver loaded [ Features: PMNLS ] [ 7.140516] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 7.145648] [drm] Memory usable by graphics device = 512M [ 7.145659] i915 0000:00:02.0: setting latency timer to 64 [ 7.145897] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 7.145910] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.145912] [drm] Driver supports precise vblank timestamp query. [ 7.145971] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.212442] b43 ssb0:0: firmware: agent loaded b43/ucode15.fw into memory [ 7.229198] [drm] initialized overlay support [ 7.280062] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000/0x0, board id: 3655, fw id: 496511 [ 7.320812] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 7.386356] fbcon: inteldrmfb (fb0) is primary device [ 7.507181] b43 ssb0:0: firmware: agent loaded b43/lp0initvals15.fw into memory [ 7.514436] b43 ssb0:0: firmware: agent loaded b43/lp0bsinitvals15.fw into memory [ 7.560962] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.107313] Console: switching to colour frame buffer device 160x50 [ 8.113907] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.113910] i915 0000:00:02.0: registered panic notifier [ 8.115238] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20130117/exoparg2-418) [ 8.115248] ACPI Error: Method parse/execution failed [\_SB_.C003.C099._DOD] (Node f5c4de78), AE_AML_PACKAGE_LIMIT (20130117/psparse-537) [ 8.115257] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20130117/video-1179) [ 8.116377] acpi device:00: registered as cooling_device6 [ 8.116644] ACPI: Video Device [C099] (multi-head: yes rom: no post: no) [ 8.117478] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 8.117921] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.355126] cfg80211: World regulatory domain updated: [ 8.355131] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.355140] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.355143] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.355145] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.355148] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.355151] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.476927] Adding 1037308k swap on /dev/sda5. Priority:-1 extents:1 across:1037308k [ 10.493986] EXT4-fs (sda1): re-mounted. Opts: (null) [ 10.779363] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.944599] fuse init (API version 7.21) [ 13.092046] RPC: Registered named UNIX socket transport module. [ 13.092050] RPC: Registered udp transport module. [ 13.092052] RPC: Registered tcp transport module. [ 13.092054] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.145985] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 13.155831] FS-Cache: Loaded [ 13.172581] Key type dns_resolver registered [ 13.200976] FS-Cache: Netfs 'nfs' registered for caching [ 13.248136] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 13.248269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.302040] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 15.725649] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10 [ 19.396101] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 20.563203] Bluetooth: Core ver 2.16 [ 20.563239] NET: Registered protocol family 31 [ 20.563241] Bluetooth: HCI device and connection manager initialized [ 20.563493] Bluetooth: HCI socket layer initialized [ 20.563499] Bluetooth: L2CAP socket layer initialized [ 20.563508] Bluetooth: SCO socket layer initialized [ 20.628342] Bluetooth: RFCOMM TTY layer initialized [ 20.628358] Bluetooth: RFCOMM socket layer initialized [ 20.628360] Bluetooth: RFCOMM ver 1.11 [ 20.632615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.632619] Bluetooth: BNEP filters: protocol multicast [ 20.632630] Bluetooth: BNEP socket layer initialized [ 24.952803] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.326126] lp: driver loaded but no devices found [ 25.426922] ppdev: user-space parallel port driver [ 51.257069] wlan0: authenticate with 74:44:01:66:7f:f1 [ 51.268676] wlan0: send auth to 74:44:01:66:7f:f1 (try 1/3) [ 51.270962] wlan0: authenticated [ 51.272162] wlan0: associate with 74:44:01:66:7f:f1 (try 1/3) [ 51.274549] wlan0: RX AssocResp from 74:44:01:66:7f:f1 (capab=0x411 status=0 aid=1) [ 51.275137] wlan0: associated [ 51.275168] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ** Model information not available ** Loaded modules: parport_pc ppdev lp parport bnep rfcomm bluetooth binfmt_misc uinput nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc fuse joydev arc4 snd_hda_codec_analog b43 i915 drm_kms_helper bcma drm mac80211 i2c_algo_bit snd_hda_intel i2c_core cfg80211 snd_hda_codec snd_hwdep rng_core snd_pcm snd_page_alloc psmouse hp_wmi sparse_keymap rfkill mperf coretemp processor video snd_seq iTCO_wdt snd_seq_device pcspkr serio_raw snd_timer evdev iTCO_vendor_support battery ac lpc_ich wmi mfd_core snd soundcore button microcode ext4 crc16 jbd2 mbcache hid_generic usbhid hid sg sr_mod sd_mod crc_t10dif cdrom ata_generic ata_piix libata scsi_mod fan thermal thermal_sys ehci_pci uhci_hcd ehci_hcd ssb mmc_core pcmcia pcmcia_core e1000e ptp pps_core usbcore usb_common *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed wlan0: 4134626 6196 0 0 0 0 0 0 329558 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile GME965/GLE960 Memory Controller Hub [8086:2a10] (rev 0c) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller [8086:2a12] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller [8086:2a13] (rev 0c) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100 Network Connection [8086:10c4] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:30d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e4600000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at e4620000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 4020 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 4040 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at e4621000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e4624000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: 40000000-401fffff Prefetchable memory behind bridge: 0000000040200000-00000000403fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: e4000000-e40fffff Prefetchable memory behind bridge: 0000000040400000-00000000405fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=28, subordinate=28, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: e0000000-e3ffffff Prefetchable memory behind bridge: 0000000040600000-00000000407fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 4060 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 4080 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 40a0 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at e4628000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 03) (prog-if 80 [Master]) Subsystem: Hewlett-Packard Company Device [103c:3618] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 40c0 [size=16] Region 5: I/O ports at 40d0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 10:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Hewlett-Packard Company BCM4312 802.11b/g Wireless LAN Controller [103c:137d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge ** USB devices: Bus 002 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.9-1-686-pae (SMP w/1 CPU core) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.113 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-1-686-pae recommends: ii firmware-linux-free 3.2 ii libc6-i686 2.17-6 Versions of packages linux-image-3.9-1-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-1-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-1-686-pae/postinst/missing-firmware-3.9-1-686-pae: linux-image-3.9-1-686-pae/prerm/removing-running-kernel-3.9-1-686-pae: true linux-image-3.9-1-686-pae/postinst/ignoring-ramdisk: linux-image-3.9-1-686-pae/postinst/depmod-error-initrd-3.9-1-686-pae: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org