Package: freebsd-net-tools
Version: 9.1-2
Severity: normal
Dear Maintainer,
After upgrade to Jessie ifconfig started to segfault.
/sbin/ifconfig segfaults when given no options or just interface as option.
You can however perform options like
# ifconfig vlan20 create
# ifconfig vlan20 vlan 20 vlandev nfe0
# ifconfig vlan20 10.0.0.1/24
After this you cannot check the interface however.
# ifconfig vlan20
vlan20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
Segmentation fault
FreeBSD 9.1 binaries in a chroot works.
# freebsd ifconfig vlan20
vlan20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 00:30:05:fa:70:14
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
inet6 fe80::230:5ff:fefa:7014%vlan20 prefixlen 64 scopeid 0x7
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 20 parent interface: nfe0
# ifconfig
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
Segmentation fault
# freebsd ifconfig
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
ether 00:30:05:fa:70:14
inet6 fe80::230:5ff:fefa:7014%nfe0 prefixlen 64 scopeid 0x3
inet XXX.XXX.XXX.X netmask 0xffffff00 broadcast XXX.XXX.X.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
pflog0: flags=0<> metric 0 mtu 33152
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
pfsync0: flags=0<> metric 0 mtu 1500
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
syncpeer: 0.0.0.0 maxupd: 128
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: kfreebsd-amd64 (x86_64)
Kernel: kFreeBSD 9.1-1-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages freebsd-net-tools depends on:
ii libbsd0 0.6.0-1
ii libc0.1 2.17-7
ii libexpat1 2.1.0-4
ii libipx2 9.1+ds1-3
ii libkvm0 9.1+ds1-3
ii libmemstat3 9.1+ds1-3
ii libnetgraph4 9.1+ds1-3
ii libsbuf6 9.1+ds1-3
freebsd-net-tools recommends no packages.
freebsd-net-tools suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
