I disconnected the USB cable and reconnected it. skanlite is working again. I waited several minutes between scans, leaving the program running, and it still worked.
I also got red boxes on my preview again; apparently it automatically tries to identify interesting regions. It wasn't close, and so I selected "disable automatic selections" in the settings. That seems to have fixed that problem. I ran udevadm monitor and recorded what happened when I reconnected the scanner. It appears there is more than one device, or at least more than one bus location associated with the scanner. It is not a multifunction device. root@tempserver:/# date; udevadm monitor --kernel --udev --property Sat Aug 24 17:27:37 PDT 2013 monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent # deleted output from the removal # it looked similar, except it used bus/usb/003/009 KERNEL[6991172.123848] add /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2 (usb) ACTION=add BUSNUM=003 DEVICE=/proc/bus/usb/003/010 DEVNAME=bus/usb/003/010 DEVNUM=010 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2 DEVTYPE=usb_device MAJOR=189 MINOR=265 PRODUCT=4b8/11e/100 SEQNUM=6721 SUBSYSTEM=usb TYPE=255/255/255 UDEV_LOG=3 KERNEL[6991172.124434] add /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0 (usb) ACTION=add DEVICE=/proc/bus/usb/003/010 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0 DEVTYPE=usb_interface INTERFACE=255/255/255 MODALIAS=usb:v04B8p011Ed0100dcFFdscFFdpFFicFFiscFFipFF PRODUCT=4b8/11e/100 SEQNUM=6722 SUBSYSTEM=usb TYPE=255/255/255 UDEV_LOG=3 UDEV [6991172.129112] add /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2 (usb) ACTION=add BUSNUM=003 DEVICE=/proc/bus/usb/003/010 DEVNAME=/dev/bus/usb/003/010 DEVNUM=010 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2 DEVTYPE=usb_device ID_BUS=usb ID_MODEL=EPSON_Scanner ID_MODEL_ENC=EPSON\x20Scanner ID_MODEL_ID=011e ID_REVISION=0100 ID_SERIAL=EPSON_EPSON_Scanner ID_USB_INTERFACES=:ffffff: ID_VENDOR=EPSON ID_VENDOR_ENC=EPSON ID_VENDOR_ID=04b8 MAJOR=189 MINOR=265 PRODUCT=4b8/11e/100 SEQNUM=6721 SUBSYSTEM=usb TAGS=:udev-acl: TYPE=255/255/255 UDEV_LOG=3 USEC_INITIALIZED=6991172125532 libsane_matched=yes UDEV [6991172.132784] add /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0 (usb) ACTION=add DEVICE=/proc/bus/usb/003/010 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0 DEVTYPE=usb_interface INTERFACE=255/255/255 MODALIAS=usb:v04B8p011Ed0100dcFFdscFFdpFFicFFiscFFipFF PRODUCT=4b8/11e/100 SEQNUM=6722 SUBSYSTEM=usb TYPE=255/255/255 UDEV_LOG=3 USEC_INITIALIZED=6991172129552 There are 2 blocks for add /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0 (usb) and 2 for add /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2 (usb) I'm not sure if that means there were 2 kernel add events for each, or just that a block is printed each time a udev rule fires. The 3rd block appears to be from /lib/udev/rules.d/60-libsane.rules -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
