Package: gnome-panel Version: 3.4.2.1-4 Followup-For: Bug #721697 I reproduced the bug, Just click the clock at the top a lot of times (no clickjagging, just regular use) I guess I clicked it 20 times when it did not show up any more. ~30 minutes later gnome segfaulted, this is serious.
Here is my dmesg log for this new crash: [114075.611361] NMI watchdog enabled, takes one hw-pmu counter. [114075.611670] CPU1 is up [114075.611920] Booting Node 0 Processor 2 APIC 0x1 [114075.611922] smpboot cpu 2: start_ip = 99000 [114075.622946] Calibrating delay loop (skipped) already calibrated this CPU [114075.643392] NMI watchdog enabled, takes one hw-pmu counter. [114075.643671] CPU2 is up [114075.643853] Booting Node 0 Processor 3 APIC 0x3 [114075.643854] smpboot cpu 3: start_ip = 99000 [114075.654875] Calibrating delay loop (skipped) already calibrated this CPU [114075.675310] NMI watchdog enabled, takes one hw-pmu counter. [114075.675624] CPU3 is up [114075.678879] ACPI: Waking up from system sleep state S3 [114075.820126] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [114075.820457] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [114075.820919] PM: early resume of devices complete after 0.983 msecs [114075.821030] i915 0000:00:02.0: setting latency timer to 64 [114075.821038] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [114075.821048] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [114075.821065] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [114075.821079] ahci 0000:00:1f.2: setting latency timer to 64 [114075.821122] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [114075.821165] r8169 0000:04:00.0: wake-up capability disabled by ACPI [114075.827059] sd 0:0:0:0: [sda] Starting disk [114075.828142] sd 1:0:0:0: [sdb] Starting disk [114075.858508] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [114076.072257] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd [114076.146969] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [114076.147904] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [114076.147915] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [114076.147924] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [114076.148906] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [114076.148917] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [114076.148925] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [114076.149188] ata1.00: configured for UDMA/133 [114076.243096] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd [114078.217850] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [114078.489055] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [114078.489066] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [114078.489075] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [114078.525310] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [114078.525321] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [114078.525329] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [114078.526652] ata2.00: configured for UDMA/133 [114078.558357] PM: resume of devices complete after 2738.787 msecs [114078.558436] PM: Finishing wakeup. [114078.558438] Restarting tasks ... done. [114078.570354] video LNXVIDEO:00: Restoring backlight state [114078.570650] video LNXVIDEO:01: Restoring backlight state [114078.859494] ADDRCONF(NETDEV_UP): wlan0: link is not ready [114078.885228] r8169 0000:04:00.0: eth0: link down [114078.885236] r8169 0000:04:00.0: eth0: link down [114078.885670] ADDRCONF(NETDEV_UP): eth0: link is not ready [114081.550161] r8169 0000:04:00.0: eth0: link up [114081.550524] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [114092.402509] eth0: no IPv6 routers present [115567.899547] sd 11:0:0:0: [sdd] 15529984 512-byte logical blocks: (7.95 GB/7.40 GiB) [115567.899654] sd 11:0:0:0: [sdd] Cache data unavailable [115567.899662] sd 11:0:0:0: [sdd] Assuming drive cache: write through [115567.900559] sd 11:0:0:0: [sdd] Cache data unavailable [115567.900565] sd 11:0:0:0: [sdd] Assuming drive cache: write through [115567.902352] sdd: sdd1 sdd2 [115570.081088] kjournald starting. Commit interval 5 seconds [115570.132611] EXT3-fs (sdd2): using internal journal [115570.132615] EXT3-fs (sdd2): recovery complete [115570.138962] EXT3-fs (sdd2): mounted filesystem with ordered data mode [116385.478519] usb 2-1.1: new full-speed USB device number 25 using ehci_hcd [116385.576582] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001 [116385.576592] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [116385.576599] usb 2-1.1: Product: TTL232R-3V3 [116385.576603] usb 2-1.1: Manufacturer: FTDI [116385.576608] usb 2-1.1: SerialNumber: FTFAF0V8 [116385.578905] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected [116385.579022] usb 2-1.1: Detected FT232RL [116385.579029] usb 2-1.1: Number of endpoints 2 [116385.579037] usb 2-1.1: Endpoint 1 MaxPacketSize 64 [116385.579044] usb 2-1.1: Endpoint 2 MaxPacketSize 64 [116385.579050] usb 2-1.1: Setting MaxPacketSize 64 [116385.579583] usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [116450.574552] sdd: detected capacity change from 7951351808 to 0 [116791.533714] ttyUSB0: 1 input overrun(s) [117141.109914] usb 2-1.1: USB disconnect, device number 25 [117141.111085] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [117141.111134] ftdi_sio 2-1.1:1.0: device disconnected [117145.400842] usb 2-1.1: new full-speed USB device number 26 using ehci_hcd [117145.498917] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001 [117145.498927] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [117145.498933] usb 2-1.1: Product: TTL232R-3V3 [117145.498938] usb 2-1.1: Manufacturer: FTDI [117145.498942] usb 2-1.1: SerialNumber: FTFAF0V8 [117145.501303] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected [117145.501419] usb 2-1.1: Detected FT232RL [117145.501427] usb 2-1.1: Number of endpoints 2 [117145.501435] usb 2-1.1: Endpoint 1 MaxPacketSize 64 [117145.501442] usb 2-1.1: Endpoint 2 MaxPacketSize 64 [117145.501448] usb 2-1.1: Setting MaxPacketSize 64 [117145.501859] usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [120815.739816] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6 [120815.759929] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver resynced. [121112.376280] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6 [121112.386874] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver resynced. [122183.524585] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6 [122183.545765] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver resynced. [123720.071597] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6 [123720.082245] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver resynced. [124312.219335] sd 11:0:0:0: [sdd] 15529984 512-byte logical blocks: (7.95 GB/7.40 GiB) [124312.219431] sd 11:0:0:0: [sdd] Cache data unavailable [124312.219439] sd 11:0:0:0: [sdd] Assuming drive cache: write through [124312.220514] sd 11:0:0:0: [sdd] Cache data unavailable [124312.220523] sd 11:0:0:0: [sdd] Assuming drive cache: write through [124312.222595] sdd: sdd1 sdd2 [124312.551363] kjournald starting. Commit interval 5 seconds [124312.621716] EXT3-fs (sdd2): using internal journal [124312.621722] EXT3-fs (sdd2): mounted filesystem with ordered data mode [124316.899233] usb 2-1.1: USB disconnect, device number 26 [124316.899588] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [124316.899629] ftdi_sio 2-1.1:1.0: device disconnected [124748.858620] sdd: detected capacity change from 7951351808 to 0 [124778.937387] usb 2-1.1: new full-speed USB device number 27 using ehci_hcd [124779.035723] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001 [124779.035734] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [124779.035740] usb 2-1.1: Product: TTL232R-3V3 [124779.035744] usb 2-1.1: Manufacturer: FTDI [124779.035749] usb 2-1.1: SerialNumber: FTFAF0V8 [124779.038108] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected [124779.038220] usb 2-1.1: Detected FT232RL [124779.038229] usb 2-1.1: Number of endpoints 2 [124779.038236] usb 2-1.1: Endpoint 1 MaxPacketSize 64 [124779.038243] usb 2-1.1: Endpoint 2 MaxPacketSize 64 [124779.038249] usb 2-1.1: Setting MaxPacketSize 64 [124779.038666] usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [125013.763522] ttyUSB0: 2 input overrun(s) [125185.567469] usb 2-1.1: USB disconnect, device number 27 [125185.567828] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [125185.567876] ftdi_sio 2-1.1:1.0: device disconnected [125205.968111] PM: Syncing filesystems ... done. [125205.985530] PM: Preparing system for mem sleep [125206.598627] Freezing user space processes ... (elapsed 0.01 seconds) done. [125206.614062] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [125206.630076] PM: Entering mem sleep [125206.630153] Suspending console(s) (use no_console_suspend to debug) [125206.630439] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [125206.630573] sd 1:0:0:0: [sdb] Stopping disk [125206.630755] sd 0:0:0:0: [sda] Synchronizing SCSI cache [125206.631369] sd 0:0:0:0: [sda] Stopping disk [125207.269684] PM: suspend of devices complete after 639.758 msecs [125207.269940] r8169 0000:04:00.0: wake-up capability enabled by ACPI [125207.301820] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [125207.317872] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [125207.333724] PM: late suspend of devices complete after 64.056 msecs [125207.334395] ACPI: Preparing to enter system sleep state S3 [125207.341689] PM: Saving platform NVS memory [125207.343424] Disabling non-boot CPUs ... [125207.445489] CPU 1 is now offline [125207.549440] CPU 2 is now offline [125207.653383] CPU 3 is now offline [125207.653929] Extended CMOS year: 2000 [125207.654192] ACPI: Low-level resume complete [125207.654243] PM: Restoring platform NVS memory [125207.654686] Extended CMOS year: 2000 [125207.654723] Enabling non-boot CPUs ... [125207.654904] Booting Node 0 Processor 1 APIC 0x2 [125207.654906] smpboot cpu 1: start_ip = 99000 [125207.665927] Calibrating delay loop (skipped) already calibrated this CPU [125207.686249] NMI watchdog enabled, takes one hw-pmu counter. [125207.686560] CPU1 is up [125207.686742] Booting Node 0 Processor 2 APIC 0x1 [125207.686743] smpboot cpu 2: start_ip = 99000 [125207.697764] Calibrating delay loop (skipped) already calibrated this CPU [125207.718226] NMI watchdog enabled, takes one hw-pmu counter. [125207.718629] CPU2 is up [125207.718922] Booting Node 0 Processor 3 APIC 0x3 [125207.718928] smpboot cpu 3: start_ip = 99000 [125207.729952] Calibrating delay loop (skipped) already calibrated this CPU [125207.750402] NMI watchdog enabled, takes one hw-pmu counter. [125207.750666] CPU3 is up [125207.753924] ACPI: Waking up from system sleep state S3 [125207.899079] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [125207.899410] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [125207.899871] PM: early resume of devices complete after 0.983 msecs [125207.899982] i915 0000:00:02.0: setting latency timer to 64 [125207.899995] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [125207.899998] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [125207.900035] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [125207.900064] ahci 0000:00:1f.2: setting latency timer to 64 [125207.900074] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [125207.900122] r8169 0000:04:00.0: wake-up capability disabled by ACPI [125207.901168] sd 0:0:0:0: [sda] Starting disk [125207.901209] sd 1:0:0:0: [sdb] Starting disk [125207.937196] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [125208.150019] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd [125208.225885] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [125208.226880] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [125208.226891] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [125208.226899] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [125208.227885] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [125208.227896] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [125208.227904] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [125208.228191] ata1.00: configured for UDMA/133 [125208.322125] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd [125210.296816] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [125210.567697] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [125210.567709] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [125210.567717] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [125210.604102] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [125210.604113] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [125210.604121] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [125210.605427] ata2.00: configured for UDMA/133 [125210.637039] PM: resume of devices complete after 2738.516 msecs [125210.637116] PM: Finishing wakeup. [125210.637117] Restarting tasks ... done. [125210.644268] video LNXVIDEO:00: Restoring backlight state [125210.644611] video LNXVIDEO:01: Restoring backlight state [125210.938139] ADDRCONF(NETDEV_UP): wlan0: link is not ready [125210.960167] r8169 0000:04:00.0: eth0: link down [125210.960173] r8169 0000:04:00.0: eth0: link down [125210.961149] ADDRCONF(NETDEV_UP): eth0: link is not ready [125213.635954] r8169 0000:04:00.0: eth0: link up [125213.636686] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [125223.893748] eth0: no IPv6 routers present [125556.335475] usb 2-1.1: new full-speed USB device number 28 using ehci_hcd [125556.433675] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001 [125556.433685] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [125556.433692] usb 2-1.1: Product: TTL232R-3V3 [125556.433697] usb 2-1.1: Manufacturer: FTDI [125556.433701] usb 2-1.1: SerialNumber: FTFAF0V8 [125556.436054] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected [125556.436096] usb 2-1.1: Detected FT232RL [125556.436098] usb 2-1.1: Number of endpoints 2 [125556.436100] usb 2-1.1: Endpoint 1 MaxPacketSize 64 [125556.436102] usb 2-1.1: Endpoint 2 MaxPacketSize 64 [125556.436104] usb 2-1.1: Setting MaxPacketSize 64 [125556.436808] usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [126540.455325] PM: Syncing filesystems ... done. [126540.473622] PM: Preparing system for mem sleep [126541.070968] Freezing user space processes ... (elapsed 0.01 seconds) done. [126541.086293] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [126541.102218] PM: Entering mem sleep [126541.102320] Suspending console(s) (use no_console_suspend to debug) [126541.102641] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [126541.102653] ftdi_sio 2-1.1:1.0: device disconnected [126541.102714] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [126541.102760] sd 0:0:0:0: [sda] Synchronizing SCSI cache [126541.102853] sd 1:0:0:0: [sdb] Stopping disk [126541.103485] sd 0:0:0:0: [sda] Stopping disk [126541.741957] PM: suspend of devices complete after 639.873 msecs [126541.742196] r8169 0000:04:00.0: wake-up capability enabled by ACPI [126541.774111] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [126541.790169] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [126541.806013] PM: late suspend of devices complete after 64.073 msecs [126541.806685] ACPI: Preparing to enter system sleep state S3 [126541.813987] PM: Saving platform NVS memory [126541.815381] Disabling non-boot CPUs ... [126541.917780] CPU 1 is now offline [126542.021732] CPU 2 is now offline [126542.125668] CPU 3 is now offline [126542.126260] Extended CMOS year: 2000 [126542.126523] ACPI: Low-level resume complete [126542.126573] PM: Restoring platform NVS memory [126542.127027] Extended CMOS year: 2000 [126542.127064] Enabling non-boot CPUs ... [126542.127244] Booting Node 0 Processor 1 APIC 0x2 [126542.127245] smpboot cpu 1: start_ip = 99000 [126542.138266] Calibrating delay loop (skipped) already calibrated this CPU [126542.158585] NMI watchdog enabled, takes one hw-pmu counter. [126542.158890] CPU1 is up [126542.159035] Booting Node 0 Processor 2 APIC 0x1 [126542.159037] smpboot cpu 2: start_ip = 99000 [126542.170060] Calibrating delay loop (skipped) already calibrated this CPU [126542.190556] NMI watchdog enabled, takes one hw-pmu counter. [126542.190855] CPU2 is up [126542.191304] Booting Node 0 Processor 3 APIC 0x3 [126542.191305] smpboot cpu 3: start_ip = 99000 [126542.202329] Calibrating delay loop (skipped) already calibrated this CPU [126542.222784] NMI watchdog enabled, takes one hw-pmu counter. [126542.223124] CPU3 is up [126542.226446] ACPI: Waking up from system sleep state S3 [126542.371385] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [126542.371716] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [126542.372183] PM: early resume of devices complete after 0.991 msecs [126542.372294] i915 0000:00:02.0: setting latency timer to 64 [126542.372308] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [126542.372312] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [126542.372348] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [126542.372380] ahci 0000:00:1f.2: setting latency timer to 64 [126542.372387] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [126542.372445] r8169 0000:04:00.0: wake-up capability disabled by ACPI [126542.373560] sd 0:0:0:0: [sda] Starting disk [126542.378293] sd 1:0:0:0: [sdb] Starting disk [126542.409224] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [126542.622421] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd [126542.690173] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [126542.691155] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [126542.691169] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [126542.691172] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [126542.692082] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [126542.692093] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [126542.692101] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [126542.692383] ata1.00: configured for UDMA/133 [126542.786272] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd [126544.881069] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [126545.156543] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [126545.156554] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [126545.156563] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [126545.193044] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [126545.193055] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [126545.193063] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [126545.194387] ata2.00: configured for UDMA/133 [126545.225915] PM: resume of devices complete after 2855.138 msecs [126545.225947] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected [126545.225984] usb 2-1.1: Detected FT232RL [126545.225985] usb 2-1.1: Number of endpoints 2 [126545.225986] usb 2-1.1: Endpoint 1 MaxPacketSize 64 [126545.225987] usb 2-1.1: Endpoint 2 MaxPacketSize 64 [126545.225988] usb 2-1.1: Setting MaxPacketSize 64 [126545.226292] usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB1 [126545.226412] PM: Finishing wakeup. [126545.226414] Restarting tasks ... done. [126545.253075] video LNXVIDEO:00: Restoring backlight state [126545.253392] video LNXVIDEO:01: Restoring backlight state [126545.521256] ADDRCONF(NETDEV_UP): wlan0: link is not ready [126545.540448] r8169 0000:04:00.0: eth0: link down [126545.540455] r8169 0000:04:00.0: eth0: link down [126545.541529] ADDRCONF(NETDEV_UP): eth0: link is not ready [126548.255673] r8169 0000:04:00.0: eth0: link up [126548.256090] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [126558.985724] eth0: no IPv6 routers present [126862.209825] usb 2-1.1: USB disconnect, device number 28 [126862.210142] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 [126862.210222] ftdi_sio 2-1.1:1.0: device disconnected [126881.098509] sd 11:0:0:0: [sdd] 15529984 512-byte logical blocks: (7.95 GB/7.40 GiB) [126881.098620] sd 11:0:0:0: [sdd] Cache data unavailable [126881.098628] sd 11:0:0:0: [sdd] Assuming drive cache: write through [126881.099633] sd 11:0:0:0: [sdd] Cache data unavailable [126881.099638] sd 11:0:0:0: [sdd] Assuming drive cache: write through [126881.101528] sdd: sdd1 sdd2 [126881.416814] kjournald starting. Commit interval 5 seconds [126881.463019] EXT3-fs (sdd2): using internal journal [126881.463026] EXT3-fs (sdd2): mounted filesystem with ordered data mode [126933.071283] sdd: detected capacity change from 7951351808 to 0 [126978.314846] usb 2-1.1: new full-speed USB device number 29 using ehci_hcd [126978.413013] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001 [126978.413024] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [126978.413030] usb 2-1.1: Product: TTL232R-3V3 [126978.413035] usb 2-1.1: Manufacturer: FTDI [126978.413039] usb 2-1.1: SerialNumber: FTFAF0V8 [126978.415291] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected [126978.415333] usb 2-1.1: Detected FT232RL [126978.415336] usb 2-1.1: Number of endpoints 2 [126978.415338] usb 2-1.1: Endpoint 1 MaxPacketSize 64 [126978.415340] usb 2-1.1: Endpoint 2 MaxPacketSize 64 [126978.415342] usb 2-1.1: Setting MaxPacketSize 64 [126978.415654] usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [131941.680626] usb 2-1.1: USB disconnect, device number 29 [131941.681089] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [131941.681131] ftdi_sio 2-1.1:1.0: device disconnected [132370.599716] soffice.bin[8140]: segfault at 0 ip 00007f211dea3ec7 sp 00007fff1c87d060 error 4 in libvcllo.so[7f211dce2000+7e5000] [133915.992647] asus_wmi: Unknown key 57 pressed [133920.494247] asus_wmi: Unknown key 58 pressed [139824.339428] PM: Syncing filesystems ... done. [139824.349011] PM: Preparing system for mem sleep [139824.974161] Freezing user space processes ... (elapsed 0.01 seconds) done. [139824.989624] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [139825.005635] PM: Entering mem sleep [139825.005714] Suspending console(s) (use no_console_suspend to debug) [139825.006033] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [139825.006084] sd 0:0:0:0: [sda] Synchronizing SCSI cache [139825.006163] sd 1:0:0:0: [sdb] Stopping disk [139825.006609] sd 0:0:0:0: [sda] Stopping disk [139825.649254] PM: suspend of devices complete after 643.772 msecs [139825.649553] r8169 0000:04:00.0: wake-up capability enabled by ACPI [139825.681376] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [139825.697428] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [139825.713279] PM: late suspend of devices complete after 64.040 msecs [139825.713951] ACPI: Preparing to enter system sleep state S3 [139825.721249] PM: Saving platform NVS memory [139825.722732] Disabling non-boot CPUs ... [139825.825041] CPU 1 is now offline [139825.929003] CPU 2 is now offline [139826.032933] CPU 3 is now offline [139826.033524] Extended CMOS year: 2000 [139826.033788] ACPI: Low-level resume complete [139826.033839] PM: Restoring platform NVS memory [139826.034285] Extended CMOS year: 2000 [139826.034323] Enabling non-boot CPUs ... [139826.034506] Booting Node 0 Processor 1 APIC 0x2 [139826.034507] smpboot cpu 1: start_ip = 99000 [139826.045528] Calibrating delay loop (skipped) already calibrated this CPU [139826.065842] NMI watchdog enabled, takes one hw-pmu counter. [139826.066144] CPU1 is up [139826.066287] Booting Node 0 Processor 2 APIC 0x1 [139826.066288] smpboot cpu 2: start_ip = 99000 [139826.077310] Calibrating delay loop (skipped) already calibrated this CPU [139826.097756] NMI watchdog enabled, takes one hw-pmu counter. [139826.098260] CPU2 is up [139826.098469] Booting Node 0 Processor 3 APIC 0x3 [139826.098471] smpboot cpu 3: start_ip = 99000 [139826.109491] Calibrating delay loop (skipped) already calibrated this CPU [139826.129940] NMI watchdog enabled, takes one hw-pmu counter. [139826.130191] CPU3 is up [139826.133451] ACPI: Waking up from system sleep state S3 [139826.278076] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [139826.278407] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [139826.278868] PM: early resume of devices complete after 0.980 msecs [139826.278949] i915 0000:00:02.0: setting latency timer to 64 [139826.278957] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [139826.278987] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [139826.279035] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [139826.279090] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [139826.279117] ahci 0000:00:1f.2: setting latency timer to 64 [139826.279242] r8169 0000:04:00.0: wake-up capability disabled by ACPI [139826.287049] sd 0:0:0:0: [sda] Starting disk [139826.287068] sd 1:0:0:0: [sdb] Starting disk [139826.315730] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [139826.529581] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd [139826.605458] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [139826.606240] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [139826.606251] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [139826.606260] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [139826.607060] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [139826.607071] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [139826.607079] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [139826.607360] ata1.00: configured for UDMA/133 [139826.646313] Extended CMOS year: 2000 [139826.701558] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd [139828.900264] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [139829.177688] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [139829.177700] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [139829.177708] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [139829.214088] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [139829.214100] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [139829.214108] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [139829.215420] ata2.00: configured for UDMA/133 [139829.235939] PM: resume of devices complete after 2958.533 msecs [139829.236029] PM: Finishing wakeup. [139829.236030] Restarting tasks ... done. [139829.242935] video LNXVIDEO:00: Restoring backlight state [139829.243205] video LNXVIDEO:01: Restoring backlight state [139829.673325] ADDRCONF(NETDEV_UP): wlan0: link is not ready [139829.943398] r8169 0000:04:00.0: eth0: link down [139829.943404] r8169 0000:04:00.0: eth0: link down [139829.943720] ADDRCONF(NETDEV_UP): eth0: link is not ready [139832.675419] r8169 0000:04:00.0: eth0: link up [139832.675956] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [139843.148851] eth0: no IPv6 routers present [147443.375512] gnome-panel[16925]: segfault at 8000000002 ip 00007fb18d847131 sp 00007fff4c5386f0 error 4 in libclock-applet.so[7fb18d825000+4b000] -- System Information: Debian Release: 7.1 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-panel depends on: ii gconf-service 3.2.5-1+build1 ii gnome-icon-theme-symbolic 3.4.0-2 ii gnome-menus 3.4.2-5 ii gnome-panel-data 3.4.2.1-4 ii libatk1.0-0 2.4.0-2 ii libc6 2.13-38 ii libcairo-gobject2 1.12.2-3 ii libcairo2 1.12.2-3 ii libdconf0 0.12.1-3 ii libebook-1.2-13 3.4.4-3 ii libecal-1.2-11 3.4.4-3 ii libedataserver-1.2-16 3.4.4-3 ii libedataserverui-3.0-1 3.4.4-3 ii libgconf-2-4 3.2.5-1+build1 ii libgdk-pixbuf2.0-0 2.26.1-1 ii libglib2.0-0 2.33.12+really2.32.4-5 ii libgnome-desktop-3-2 3.4.2-1 ii libgnome-menu-3-0 3.4.2-5 ii libgtk-3-0 3.4.2-6 ii libgweather-3-0 3.4.1-1+build1 ii libical0 0.48-2 ii libice6 2:1.0.8-2 ii libpanel-applet-4-0 3.4.2.1-4 ii libpango1.0-0 1.30.0-1 ii librsvg2-2 2.36.1-1 ii libsm6 2:1.2.1-2 ii libsoup2.4-1 2.38.1-2 ii libtelepathy-glib0 0.18.2-2 ii libwnck-3-0 3.4.2-1 ii libx11-6 2:1.5.0-1+deb7u1 ii libxau6 1:1.0.7-1 ii libxml2 2.8.0+dfsg1-7+nmu1 ii libxrandr2 2:1.3.2-2+deb7u1 Versions of packages gnome-panel recommends: ii alacarte 3.5.3-1 ii evolution-data-server 3.4.4-3 ii gnome-applets 3.4.1-3 ii gnome-control-center 1:3.4.3.1-2 ii gnome-icon-theme 3.4.0-2 ii gnome-session 3.4.2.1-4 ii gnome-session-fallback 3.4.2.1-4 ii gvfs 1.12.3-4 Versions of packages gnome-panel suggests: ii gnome-terminal [x-terminal-emulator] 3.4.1.1-2 ii gnome-user-guide 3.4.2-1+build1 ii nautilus 3.4.2-1+build1 ii xterm [x-terminal-emulator] 278-4 ii yelp 3.4.2-1+b1 -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
