Package: src:linux
Version: 3.10.11-1
Severity: important
File: linux
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.10-3-amd64 (debian-ker...@lists.debian.org) (gcc version
4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
** Command line:
BOOT_IMAGE=/vmlinuz root=/dev/sda3 ro quiet
** Not tainted
** Kernel log:
[ 1155.524559] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1155.527013] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1155.527016] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1155.527019] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1155.528204] ata2.00: configured for UDMA/133
[ 1155.543358] sd 1:0:0:0: [sdb] Starting disk
[ 1155.565351] PM: resume of devices complete after 9641.930 msecs
[ 1155.565488] PM: Finishing wakeup.
[ 1155.565489] Restarting tasks ... done.
[ 1155.566134] video LNXVIDEO:00: Restoring backlight state
[ 1416.437695] PM: Syncing filesystems ... done.
[ 1416.438090] PM: Preparing system for mem sleep
[ 1416.438187] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[ 1416.452452] Freezing remaining freezable tasks ... (elapsed 0.01
seconds) done.
[ 1416.468442] PM: Entering mem sleep
[ 1416.468496] Suspending console(s) (use no_console_suspend to debug)
[ 1416.469921] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1416.469977] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1416.470044] sd 0:0:0:0: [sda] Stopping disk
[ 1416.470070] sd 1:0:0:0: [sdb] Stopping disk
[ 1416.470080] serial 00:08: disabled
[ 1416.470083] serial 00:08: System wakeup disabled by ACPI
[ 1416.470201] mei_me 0000:00:16.0: suspend
[ 1417.148132] PM: suspend of devices complete after 679.950 msecs
[ 1417.148223] PM: late suspend of devices complete after 0.089 msecs
[ 1417.148393] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1417.164064] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1417.180030] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 1417.212011] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1417.228007] PM: noirq suspend of devices complete after 79.829 msecs
[ 1417.228245] ACPI: Preparing to enter system sleep state S3
[ 1417.228468] PM: Saving platform NVS memory
[ 1417.229022] Disabling non-boot CPUs ...
[ 1417.331890] smpboot: CPU 1 is now offline
[ 1417.435829] smpboot: CPU 2 is now offline
[ 1417.437219] smpboot: CPU 3 is now offline
[ 1417.438332] ACPI: Low-level resume complete
[ 1417.438372] PM: Restoring platform NVS memory
[ 1417.438831] Enabling non-boot CPUs ...
[ 1417.438902] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1417.452417] Intel pstate controlling: cpu 1
[ 1417.452470] CPU1 is up
[ 1417.452519] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1417.466046] Intel pstate controlling: cpu 2
[ 1417.466082] CPU2 is up
[ 1417.466138] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 1417.479665] Intel pstate controlling: cpu 3
[ 1417.479701] CPU3 is up
[ 1417.483308] ACPI: Waking up from system sleep state S3
[ 1417.513152] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1417.561123] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1417.593098] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1417.609135] PM: noirq resume of devices complete after 125.501 msecs
[ 1417.609221] PM: early resume of devices complete after 0.068 msecs
[ 1417.609250] i915 0000:00:02.0: setting latency timer to 64
[ 1417.609252] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1417.609280] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[ 1417.609300] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 1417.609307] e1000e 0000:00:19.0: setting latency timer to 64
[ 1417.609321] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 1417.609389] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1417.609390] ahci 0000:00:1f.2: setting latency timer to 64
[ 1417.609462] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 1417.609560] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1417.610430] serial 00:08: activated
[ 1417.936837] ata6: SATA link down (SStatus 0 SControl 300)
[ 1417.936855] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1417.938286] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1417.938287] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1417.938289] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1417.952828] ata5: SATA link down (SStatus 0 SControl 300)
[ 1417.958278] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1417.958279] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1417.958280] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1417.960826] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1417.963109] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1417.963110] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1417.963111] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1417.967860] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1417.967861] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1417.967862] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1417.968279] ata1.00: configured for UDMA/133
[ 1417.969754] ata3.00: configured for UDMA/100
[ 1417.980997] sd 0:0:0:0: [sda] Starting disk
[ 1418.972285] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 1420.904566] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 1422.981975] ata2: link is slow to respond, please be patient (ready=0)
[ 1427.347420] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1427.348682] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1427.348685] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1427.348688] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1427.351133] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[ 1427.351137] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[ 1427.351139] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[ 1427.352327] ata2.00: configured for UDMA/133
[ 1427.367512] sd 1:0:0:0: [sdb] Starting disk
[ 1427.395450] PM: resume of devices complete after 9791.884 msecs
[ 1427.395600] PM: Finishing wakeup.
[ 1427.395601] Restarting tasks ... done.
[ 1427.397997] video LNXVIDEO:00: Restoring backlight state
** Model information
sys_vendor: product_name: product_version:
chassis_vendor: chassis_version: bios_vendor: Intel Corp.
bios_version: EBH7710H.86A.0089.2012.0809.1606
board_vendor: Intel Corporation
board_name: DH77EB
board_version: AAG39073-304
** Loaded modules:
binfmt_misc
snd_hda_codec_realtek
iTCO_wdt
iTCO_vendor_support
parport_pc
ppdev
lp
parport
coretemp
kvm_intel
kvm
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
usblp
microcode
pcspkr
snd_hda_intel
snd_hda_codec
evdev
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
i2c_i801
snd
lpc_ich
mfd_core
soundcore
wmi
i915
mperf
video
button
drm_kms_helper
drm
i2c_algo_bit
processor
mei_me
i2c_core
mei
w83627ehf
hwmon_vid
fuse
autofs4
ext4
crc16
jbd2
mbcache
sg
sr_mod
cdrom
sd_mod
crc_t10dif
hid_generic
usbhid
hid
ahci
libahci
libata
scsi_mod
e1000e
ptp
pps_core
ehci_pci
xhci_hcd
ehci_hcd
fan
thermal
thermal_sys
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.0.12
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.10
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.10
dns-search home
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 00:22:4d:83:64:41 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.12/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::222:4dff:fe83:6441/64 scope link valid_lft
forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 2666380 3253 0 0 0 0 0 0
270153 2025 0 0 0 0 0 0
lo: 16005 40 0 0 0 0 0 0
16005 40 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2307 total packets received
0 forwarded
0 incoming packets discarded
2307 incoming packets delivered
2002 requests sent out
8 dropped because of missing route
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
IcmpMsg:
InType3: 1
OutType3: 1
Tcp:
75 active connections openings
2 passive connection openings
4 failed connection attempts
14 connection resets received
0 connections established
2162 segments received
1862 segments send out
0 segments retransmited
4 bad segments received.
34 resets sent
Udp:
180 packets received
0 packets to unknown port received.
0 packet receive errors
181 packets sent
UdpLite:
TcpExt:
18 TCP sockets finished time wait in fast timer
30 delayed acks sent
1275 packet headers predicted
139 acknowledgments not containing data payload received
3 predicted acknowledgments
3 connections reset due to unexpected data
14 connections reset due to early user close
TCPRcvCoalesce: 315
TCPOFOQueue: 347
TCPChallengeACK: 4
TCPSYNChallenge: 4
IpExt:
InMcastPkts: 32
OutMcastPkts: 34
InBcastPkts: 1
InOctets: 2567020
OutOctets: 230713
InMcastOctets: 4207
OutMcastOctets: 4287
InBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen
Core processor DRAM Controller [8086:0150] (rev 09)
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200
v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09)
(prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30
[XHCI])
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210
Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7c3b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit
Network Connection [8086:1503] (rev 04)
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series
Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC
Controller [8086:1e4a] (rev 04)
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series
Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04)
(prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset
Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Intel Corporation Device [8086:2032]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
** USB devices:
Bus 002 Device 005: ID 051d:0002 American Power Conversion
Uninterruptible Power Supply
Bus 002 Device 004: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 002 Device 003: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 001 Device 005: ID 03f0:1004 Hewlett-Packard DeskJet 970c/970cse
Bus 001 Device 004: ID eb1a:51b2 eMPIA Technology, Inc. Bus 001 Device
003: ID 04a9:190a Canon, Inc. CanoScan LiDE 210
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-3-amd64 depends on:
pn debconf | debconf-2.0 <none>
pn initramfs-tools | linux-initramfs-tool <none>
pn kmod | module-init-tools <none>
pn linux-base <none>
Versions of packages linux-image-3.10-3-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.10-3-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-3-amd64/postinst/missing-firmware-3.10-3-amd64:
linux-image-3.10-3-amd64/postinst/depmod-error-initrd-3.10-3-amd64: false
linux-image-3.10-3-amd64/prerm/removing-running-kernel-3.10-3-amd64: true
------------------------------------------------------------------
Here an example with idle desktop, scaling driver "intel_pstate":
cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
powersave
powersave
powersave
powersave
$ cat /proc/cpuinfo | grep -i mhz
cpu MHz : 1632.000
cpu MHz : 1632.000
cpu MHz : 1666.000
cpu MHz : 1666.000
# cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq
1666000
1598000
1666000
1666000
Now s2ram + resume:
cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
powersave
powersave
powersave
powersave
cat /proc/cpuinfo | grep -i mhz
cpu MHz : 3060.000
cpu MHz : 1598.000
cpu MHz : 3366.000
cpu MHz : 1598.000
cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq
1598000
2652000
3264000
1598000
I even noticed once that after resume only core0 was on "powersave"
while core 1,2,3 were on "performance".
This has also been reported with kernel 3.10-rcX in Gentoo:
http://comments.gmane.org/gmane.linux.kernel.cpufreq/11000
and a fix/patch was published here:
https://lkml.org/lkml/2013/7/11/661
/Ingo
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
