Package: usbmount
Version: 0.0.14
Severity: important
My usbdrive is recognised by udev when plugged in:
Nov 7 01:01:49 localhost kernel: usb 3-2: new full speed USB device
using ohci_hcd and address 5
Nov 7 01:01:49 localhost kernel: scsi2 : SCSI emulation for USB Mass
Storage devices
Nov 7 01:01:49 localhost kernel: usb-storage: device found at 5
Nov 7 01:01:49 localhost kernel: usb-storage: waiting for device to
settle before scanning
Nov 7 01:01:54 localhost kernel: Vendor: Model:
Rev:
Nov 7 01:01:54 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
Nov 7 01:01:54 localhost kernel: SCSI device sda: 503521 512-byte hdwr
sectors (258 MB)
Nov 7 01:01:54 localhost kernel: sda: Write Protect is off
Nov 7 01:01:54 localhost kernel: sda: Mode Sense: 00 c0 00 00
Nov 7 01:01:54 localhost kernel: sda: assuming drive cache: write
through
Nov 7 01:01:54 localhost kernel: SCSI device sda: 503521 512-byte hdwr
sectors (258 MB)
Nov 7 01:01:54 localhost kernel: sda: Write Protect is off
Nov 7 01:01:54 localhost kernel: sda: Mode Sense: 00 c0 00 00
Nov 7 01:01:54 localhost kernel: sda: assuming drive cache: write
through
Nov 7 01:01:54 localhost kernel: sda: sda1
Nov 7 01:01:54 localhost kernel: Attached scsi removable disk sda at
scsi2, channel 0, id 0, lun 0
Nov 7 01:01:54 localhost kernel: usb-storage: device scan complete
I can manually mount the drive using this /etc/fstab entry:
/dev/sda1 /mnt/usbdrive vfat
defaults,uid=65534,gid=65534,umask=000,iocharset=utf8 0 0
(all on one line), but haven't had successful automounts.
/etc/usbmount/usbmount.conf is:
MOUNTPOINTS="/media/usb0 /media/usb1 /media/usb2 /media/usb3
/media/usb4 /media/usb5 /media/usb6 /media/usb7"
FILESYSTEMS="ext2 ext3 vfat"
MOUNTOPTIONS="noexec,nodev,noatime,iocharset=utf8,user=amarsh04"
FS_MOUNTOPTIONS=""
VERBOSE="no"
I could not find anything in /etc/udev that appeared to tell udev to
recognise usbdrives.
Are there one or more files needed in /etc/udev to identify usbdrives?
Regards,
Arthur.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.14-1-686
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Versions of packages usbmount depends on:
ii lockfile-progs 0.1.10 Programs for locking and unlocking
ii udev 0.071-1 /dev/ and hotplug management daemo
usbmount recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
