Package: udev Version: 0.074-2 Severity: important
I have upgraded udev and purged the hotplug package as advised in the postinst script. Unfortunately I don't know the previous version of udev I had but I think it was 0.06x because it required kernel >= 2.6.12. I use custom built kernel which differs from distribution 2.6.12-6-686 only in changed CPU type (P4) and enabled cx88 (tv tuner) as module. Everything works fine except that module for my USB cable modem (usbnet) does not load automatically (as was the case for hotplug). I have to load it manually (add it to /etc/modules). On the other hand module for my USB mouse (usbhid) is loaded on boot or when I plug it in. I wish I could try more USB devices but I don't have any at the moment. Here is what is added to /dev/hotplug.log when I plug in the cable modem: HOTPLUG_TIME='Sun Nov 13 13:52:19 CET 2005' SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:03.0/usb1/1-1 ACTION=add UDEV_LOG=3 UDEVD_EVENT=1 PHYSDEVDRIVER=usb PHYSDEVBUS=usb SEQNUM=1044 HOTPLUG_TIME='Sun Nov 13 13:52:19 CET 2005' SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0 ACTION=add MODALIAS=usb:v07B2p5100d0101dc02dsc00dp00ic*isc*ip* UDEV_LOG=3 UDEVD_EVENT=1 DEVICE=/proc/bus/usb/001/002 PRODUCT=7b2/5100/101 TYPE=2/0/0 PHYSDEVBUS=usb SEQNUM=1045 HOTPLUG_TIME='Sun Nov 13 13:52:19 CET 2005' SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.1 ACTION=add MODALIAS=usb:v07B2p5100d0101dc02dsc00dp00ic*isc*ip* UDEV_LOG=3 UDEVD_EVENT=1 DEVICE=/proc/bus/usb/001/002 PRODUCT=7b2/5100/101 TYPE=2/0/0 PHYSDEVBUS=usb SEQNUM=1046 The following appears in hotplug.log after modprobe usbnet: HOTPLUG_TIME='Sun Nov 13 13:53:12 CET 2005' SUBSYSTEM=module OLDPWD=/ DEVPATH=/module/usbnet ACTION=add UDEV_LOG=3 UDEVD_EVENT=1 SEQNUM=1047 HOTPLUG_TIME='Sun Nov 13 13:53:12 CET 2005' SUBSYSTEM=drivers OLDPWD=/ DEVPATH=/bus/usb/drivers/usbnet ACTION=add UDEV_LOG=3 UDEVD_EVENT=1 SEQNUM=1048 HOTPLUG_TIME='Sun Nov 13 13:53:12 CET 2005' PHYSDEVPATH=/devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0 SUBSYSTEM=net OLDPWD=/ DEVPATH=/class/net/eth2 ACTION=add UDEV_LOG=3 UDEVD_EVENT=1 PHYSDEVDRIVER=usbnet INTERFACE=eth2 PHYSDEVBUS=usb SEQNUM=1049 This is the lsusb identification of my USB devices: Bus 002 Device 002: ID 046d:c016 Logitech, Inc. Optical Mouse Bus 001 Device 003: ID 07b2:5100 Motorola BCS, Inc. -- Package-specific info: -- /etc/udev/rules.d/: /etc/udev/rules.d/: celkem 0 lrwxrwxrwx 1 root root 19 2005-05-24 23:29 cd-aliases.rules -> ../cd-aliases.rules lrwxrwxrwx 1 root root 13 2005-05-24 23:29 udev.rules -> ../udev.rules lrwxrwxrwx 1 root root 19 2005-09-18 18:30 z20_persistent.rules -> ../persistent.rules lrwxrwxrwx 1 root root 12 2005-09-18 18:30 z50_run.rules -> ../run.rules lrwxrwxrwx 1 root root 16 2005-11-13 10:38 z55_hotplug.rules -> ../hotplug.rules lrwxrwxrwx 1 root root 19 2005-09-18 18:30 z60_alsa-utils.rules -> ../alsa-utils.rules lrwxrwxrwx 1 root root 17 2005-09-18 18:30 z60_usbmount.rules -> ../usbmount.rules lrwxrwxrwx 1 root root 17 2005-09-18 18:30 z70_hotplugd.rules -> ../hotplugd.rules lrwxrwxrwx 1 root root 20 2005-05-24 23:29 020_permissions.rules -> ../permissions.rules lrwxrwxrwx 1 root root 19 2005-10-31 23:28 025_libgphoto2.rules -> ../libgphoto2.rules lrwxrwxrwx 1 root root 16 2005-10-11 19:51 025_libsane.rules -> ../libsane.rules lrwxrwxrwx 1 root root 12 2005-10-31 23:28 050_hal-plugdev.rules -> ../hal.rules -- /sys/: /sys/block/hda/dev /sys/block/hda/hda1/dev /sys/block/hda/hda2/dev /sys/block/hda/hda3/dev /sys/block/hdb/dev /sys/block/ram0/dev /sys/block/ram1/dev /sys/block/ram10/dev /sys/block/ram11/dev /sys/block/ram12/dev /sys/block/ram13/dev /sys/block/ram14/dev /sys/block/ram15/dev /sys/block/ram2/dev /sys/block/ram3/dev /sys/block/ram4/dev /sys/block/ram5/dev /sys/block/ram6/dev /sys/block/ram7/dev /sys/block/ram8/dev /sys/block/ram9/dev /sys/class/input/event0/dev /sys/class/input/event1/dev /sys/class/input/event2/dev /sys/class/input/event3/dev /sys/class/input/event4/dev /sys/class/input/mice/dev /sys/class/input/mouse0/dev /sys/class/input/mouse1/dev /sys/class/misc/agpgart/dev /sys/class/misc/hpet/dev /sys/class/misc/psaux/dev /sys/class/misc/rtc/dev /sys/class/sound/adsp/dev /sys/class/sound/audio/dev /sys/class/sound/controlC0/dev /sys/class/sound/dsp/dev /sys/class/sound/mixer/dev /sys/class/sound/pcmC0D0c/dev /sys/class/sound/pcmC0D0p/dev /sys/class/sound/pcmC0D1c/dev /sys/class/sound/timer/dev /sys/class/video4linux/radio0/dev /sys/class/video4linux/vbi0/dev /sys/class/video4linux/video0/dev -- Kernel configuration: -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12 Locale: LANG=cs_CZ, LC_CTYPE=cs_CZ (charmap=ISO-8859-2) Versions of packages udev depends on: ii initscripts 2.86.ds1-4 Standard scripts needed for bootin ii libc6 2.3.5-6 GNU C Library: Shared libraries an ii libselinux1 1.26-1 SELinux shared libraries ii libsepol1 1.8-1 Security Enhanced Linux policy lib ii lsb-base 3.0-11 Linux Standard Base 3.0 init scrip ii makedev 2.3.1-78 creates device files in /dev ii sed 4.1.2-8 The GNU sed stream editor udev recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
