Package: xserver-xorg-video-fbdev Version: 1:0.4.4-1+b1 Severity: normal This may be a bug, a configuration problem, or - preferably not - a works_as_designed case.
* upgraded xserver-xorg packages from abi 12 to avi 14, losing the sis video driver. The XVideo module worked with the sis driver. * tried to set up the xserver to use the fbdriver instead. * inserted the mode-specific info into /etc/fb.modes ---------------------------------- $ fbset -i mode "1280x800-60" # D: 108.003 MHz, H: 63.983 kHz, V: 60.021 Hz geometry 1280 800 1280 12985 32 timings 9259 248 48 131 131 112 4 hsync high vsync high accel true rgba 8/16,8/8,8/0,0/0 endmode Frame buffer device information: Name : SiS 760 Address : 0xe8000000 Size : 66486272 Type : PACKED PIXELS Visual : TRUECOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 0 LineLength : 5120 MMIO Address: 0xe2100000 MMIO Size : 131072 Accelerator : SiS 330 (Xabre) ---------------------------------- * used the following in /etc/modules: sisfb mode=1280x800x24 rate=60 mem=16384 * switched from gdm3 to wdm (another, unreported bug) => not using any xorg.conf, the system starts correctly and the openbox desktop I'm using works properly. * my only problem is now that I have not found a way to use the XVideo module. Trying to load it explicitly gives the following messages in Xorg.0.log: --------------------------------------- .... [ 85076.636] (II) Loader magic: 0x7f0b83347d40 [ 85076.636] (II) Module ABI versions: [ 85076.636] X.Org ANSI C Emulation: 0.4 [ 85076.636] X.Org Video Driver: 15.0 [ 85076.636] X.Org XInput driver : 20.0 [ 85076.636] X.Org Server Extension : 8.0 [ 85076.636] (II) xfree86: Adding drm device (/dev/dri/card0) [ 85076.638] (--) PCI:*(0:1:0:0) 1039:6330:1025:0083 rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128 [ 85076.639] Initializing built-in extension Generic Event Extension .... [ 85076.644] Initializing built-in extension XVideo [ 85076.644] Initializing built-in extension XVideo-MotionCompensation [ 85076.644] Initializing built-in extension SELinux [ 85076.644] Initializing built-in extension XFree86-VidModeExtension [ 85076.645] Initializing built-in extension XFree86-DGA [ 85076.645] Initializing built-in extension XFree86-DRI [ 85076.645] Initializing built-in extension DRI2 [ 85076.645] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 85076.645] (II) LoadModule: "record" [ 85076.645] (II) Module "record" already built-in [ 85076.646] (II) LoadModule: "dri2" [ 85076.646] (II) Module "dri2" already built-in [ 85076.646] (II) LoadModule: "glx" [ 85076.646] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 85076.647] (II) Module glx: vendor="X.Org Foundation" [ 85076.647] compiled for 1.15.0, module version = 1.0.0 [ 85076.647] ABI class: X.Org Server Extension, version 8.0 [ 85076.647] (==) AIGLX enabled [ 85076.647] Loading extension GLX [ 85076.647] (II) LoadModule: "dri" [ 85076.647] (II) Module "dri" already built-in [ 85076.647] (II) LoadModule: "dbe" [ 85076.648] (II) Module "dbe" already built-in [ 85076.648] (II) LoadModule: "extmod" [ 85076.648] (II) Module "extmod" already built-in [ 85076.648] (II) LoadModule: "xvideo" [ 85076.649] (WW) Warning, couldn't open module xvideo [ 85076.649] (II) UnloadModule: "xvideo" [ 85076.649] (II) Unloading xvideo .... --------------------------------------- * I couldn't grab anything useful from the net, glad about any pointers you can provide. -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Oct 30 2012 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2323424 Feb 6 16:23 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330] /etc/X11/xorg.conf does not exist. /etc/X11/xorg.conf.d does not exist. KMS configuration files: ------------------------ /etc/modprobe.d/i915-kms.conf: options i915 modeset=1 /etc/modprobe.d/radeon-kms.conf: options radeon modeset=1 Kernel version (/proc/version): ------------------------------- Linux version 3.11-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.6-2 (2013-11-01) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 12085 Mar 17 17:29 /var/log/Xorg.1.log -rw-r--r-- 1 root root 19779 Mar 18 21:55 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 85690.175] X.Org X Server 1.15.0 Release Date: 2013-12-27 [ 85690.175] X Protocol Version 11, Revision 0 [ 85690.176] Build Operating System: Linux 3.12-1-amd64 x86_64 Debian [ 85690.176] Current Operating System: Linux axrocet 3.11-1-amd64 #1 SMP Debian 3.11.6-2 (2013-11-01) x86_64 [ 85690.176] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-1-amd64 root=/dev/mapper/vg00-lroot ro lvmwait=/dev/mapper/vg00-lroot rootdelay=10 quiet [ 85690.177] Build Date: 06 February 2014 03:20:45PM [ 85690.177] xorg-server 2:1.15.0-2 (http://www.debian.org/support) [ 85690.177] Current version of pixman: 0.32.4 [ 85690.177] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 85690.177] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 85690.178] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 18 21:55:01 2014 [ 85690.179] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 85690.180] (==) No Layout section. Using the first Screen section. [ 85690.180] (==) No screen section available. Using defaults. [ 85690.180] (**) |-->Screen "Default Screen Section" (0) [ 85690.180] (**) | |-->Monitor "<default monitor>" [ 85690.181] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 85690.181] (==) Automatically adding devices [ 85690.181] (==) Automatically enabling devices [ 85690.181] (==) Automatically adding GPU devices [ 85690.181] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 85690.181] Entry deleted from font path. [ 85690.181] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 85690.181] (==) ModulePath set to "/usr/lib/xorg/modules" [ 85690.181] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 85690.181] (II) Loader magic: 0x7f3978a01d40 [ 85690.181] (II) Module ABI versions: [ 85690.181] X.Org ANSI C Emulation: 0.4 [ 85690.181] X.Org Video Driver: 15.0 [ 85690.181] X.Org XInput driver : 20.0 [ 85690.181] X.Org Server Extension : 8.0 [ 85690.182] (II) xfree86: Adding drm device (/dev/dri/card0) [ 85690.187] (--) PCI:*(0:1:0:0) 1039:6330:1025:0083 rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128 [ 85690.188] Initializing built-in extension Generic Event Extension [ 85690.188] Initializing built-in extension SHAPE [ 85690.188] Initializing built-in extension MIT-SHM [ 85690.190] Initializing built-in extension XInputExtension [ 85690.191] Initializing built-in extension XTEST [ 85690.191] Initializing built-in extension BIG-REQUESTS [ 85690.191] Initializing built-in extension SYNC [ 85690.191] Initializing built-in extension XKEYBOARD [ 85690.191] Initializing built-in extension XC-MISC [ 85690.192] Initializing built-in extension SECURITY [ 85690.192] Initializing built-in extension XINERAMA [ 85690.192] Initializing built-in extension XFIXES [ 85690.192] Initializing built-in extension RENDER [ 85690.192] Initializing built-in extension RANDR [ 85690.193] Initializing built-in extension COMPOSITE [ 85690.193] Initializing built-in extension DAMAGE [ 85690.193] Initializing built-in extension MIT-SCREEN-SAVER [ 85690.193] Initializing built-in extension DOUBLE-BUFFER [ 85690.193] Initializing built-in extension RECORD [ 85690.194] Initializing built-in extension DPMS [ 85690.194] Initializing built-in extension Present [ 85690.194] Initializing built-in extension DRI3 [ 85690.194] Initializing built-in extension X-Resource [ 85690.194] Initializing built-in extension XVideo [ 85690.195] Initializing built-in extension XVideo-MotionCompensation [ 85690.195] Initializing built-in extension SELinux [ 85690.195] Initializing built-in extension XFree86-VidModeExtension [ 85690.195] Initializing built-in extension XFree86-DGA [ 85690.195] Initializing built-in extension XFree86-DRI [ 85690.196] Initializing built-in extension DRI2 [ 85690.196] (II) LoadModule: "glx" [ 85690.197] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 85690.197] (II) Module glx: vendor="X.Org Foundation" [ 85690.197] compiled for 1.15.0, module version = 1.0.0 [ 85690.197] ABI class: X.Org Server Extension, version 8.0 [ 85690.197] (==) AIGLX enabled [ 85690.199] Loading extension GLX [ 85690.199] (==) Matched sis as autoconfigured driver 0 [ 85690.199] (==) Matched sis as autoconfigured driver 1 [ 85690.199] (==) Matched modesetting as autoconfigured driver 2 [ 85690.199] (==) Matched fbdev as autoconfigured driver 3 [ 85690.199] (==) Matched vesa as autoconfigured driver 4 [ 85690.199] (==) Assigned the driver to the xf86ConfigLayout [ 85690.199] (II) LoadModule: "sis" [ 85690.203] (WW) Warning, couldn't open module sis [ 85690.203] (II) UnloadModule: "sis" [ 85690.203] (II) Unloading sis [ 85690.203] (EE) Failed to load module "sis" (module does not exist, 0) [ 85690.203] (II) LoadModule: "modesetting" [ 85690.203] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 85690.204] (II) Module modesetting: vendor="X.Org Foundation" [ 85690.204] compiled for 1.15.0, module version = 0.8.1 [ 85690.204] Module class: X.Org Video Driver [ 85690.204] ABI class: X.Org Video Driver, version 15.0 [ 85690.204] (II) LoadModule: "fbdev" [ 85690.204] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 85690.205] (II) Module fbdev: vendor="X.Org Foundation" [ 85690.205] compiled for 1.15.0, module version = 0.4.4 [ 85690.205] Module class: X.Org Video Driver [ 85690.205] ABI class: X.Org Video Driver, version 15.0 [ 85690.205] (II) LoadModule: "vesa" [ 85690.205] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 85690.205] (II) Module vesa: vendor="X.Org Foundation" [ 85690.205] compiled for 1.15.0, module version = 2.3.3 [ 85690.205] Module class: X.Org Video Driver [ 85690.205] ABI class: X.Org Video Driver, version 15.0 [ 85690.205] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 85690.205] (II) FBDEV: driver for framebuffer: fbdev [ 85690.205] (II) VESA: driver for VESA chipsets: vesa [ 85690.205] (++) using VT number 7 [ 85691.092] (WW) Falling back to old probe method for modesetting [ 85691.092] (II) Loading sub module "fbdevhw" [ 85691.092] (II) LoadModule: "fbdevhw" [ 85691.092] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 85691.092] (II) Module fbdevhw: vendor="X.Org Foundation" [ 85691.092] compiled for 1.15.0, module version = 0.0.2 [ 85691.092] ABI class: X.Org Video Driver, version 15.0 [ 85691.092] (**) FBDEV(1): claimed PCI slot 1@0:0:0 [ 85691.092] (II) FBDEV(1): using default device [ 85691.092] (WW) Falling back to old probe method for vesa [ 85691.092] (EE) Screen 0 deleted because of no matching config section. [ 85691.092] (II) UnloadModule: "modesetting" [ 85691.093] (II) FBDEV(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 85691.093] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32 [ 85691.093] (==) FBDEV(0): RGB weight 888 [ 85691.093] (==) FBDEV(0): Default visual is TrueColor [ 85691.093] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) [ 85691.093] (II) FBDEV(0): hardware: SiS 760 (video memory: 64928kB) [ 85691.093] (II) FBDEV(0): checking modes against framebuffer device... [ 85691.093] (II) FBDEV(0): checking modes against monitor... [ 85691.093] (--) FBDEV(0): Virtual size is 1280x800 (pitch 1280) [ 85691.093] (**) FBDEV(0): Built-in mode "current": 108.0 MHz, 64.0 kHz, 60.0 Hz [ 85691.093] (II) FBDEV(0): Modeline "current"x0.0 108.00 1280 1328 1440 1688 800 931 935 1066 +hsync +vsync -csync (64.0 kHz b) [ 85691.093] (==) FBDEV(0): DPI set to (96, 96) [ 85691.093] (II) Loading sub module "fb" [ 85691.093] (II) LoadModule: "fb" [ 85691.093] (II) Loading /usr/lib/xorg/modules/libfb.so [ 85691.093] (II) Module fb: vendor="X.Org Foundation" [ 85691.093] compiled for 1.15.0, module version = 1.0.0 [ 85691.093] ABI class: X.Org ANSI C Emulation, version 0.4 [ 85691.093] (**) FBDEV(0): using shadow framebuffer [ 85691.093] (II) Loading sub module "shadow" [ 85691.093] (II) LoadModule: "shadow" [ 85691.093] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 85691.094] (II) Module shadow: vendor="X.Org Foundation" [ 85691.094] compiled for 1.15.0, module version = 1.1.0 [ 85691.094] ABI class: X.Org ANSI C Emulation, version 0.4 [ 85691.094] (II) UnloadModule: "vesa" [ 85691.094] (II) Unloading vesa [ 85691.094] (==) Depth 24 pixmap format is 32 bpp [ 85691.714] (==) FBDEV(0): Backing store enabled [ 85691.714] (==) FBDEV(0): DPMS enabled [ 85691.714] (==) RandR enabled [ 85691.736] (II) SELinux: Disabled on system [ 85691.738] (II) AIGLX: Screen 0 is not DRI2 capable [ 85691.738] (EE) AIGLX: reverting to software rendering [ 85691.759] (II) AIGLX: Loaded and initialized swrast [ 85691.760] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 85691.840] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 85691.840] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 85691.840] (II) LoadModule: "evdev" [ 85691.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 85691.841] (II) Module evdev: vendor="X.Org Foundation" [ 85691.841] compiled for 1.15.0, module version = 2.8.2 [ 85691.841] Module class: X.Org XInput Driver [ 85691.841] ABI class: X.Org XInput driver, version 20.0 [ 85691.841] (II) Using input driver 'evdev' for 'Power Button' [ 85691.841] (**) Power Button: always reports core events [ 85691.841] (**) evdev: Power Button: Device: "/dev/input/event4" [ 85691.841] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 85691.841] (--) evdev: Power Button: Found keys [ 85691.841] (II) evdev: Power Button: Configuring as keyboard [ 85691.841] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 85691.841] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 85691.841] (**) Option "xkb_rules" "evdev" [ 85691.841] (**) Option "xkb_model" "pc105" [ 85691.841] (**) Option "xkb_layout" "ch" [ 85691.841] (**) Option "xkb_variant" "de_nodeadkeys" [ 85691.841] (**) Option "xkb_options" "compose:menu" [ 85691.883] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 85691.883] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 85691.883] (II) Using input driver 'evdev' for 'Power Button' [ 85691.883] (**) Power Button: always reports core events [ 85691.883] (**) evdev: Power Button: Device: "/dev/input/event2" [ 85691.883] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 85691.883] (--) evdev: Power Button: Found keys [ 85691.883] (II) evdev: Power Button: Configuring as keyboard [ 85691.883] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 85691.883] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 85691.883] (**) Option "xkb_rules" "evdev" [ 85691.883] (**) Option "xkb_model" "pc105" [ 85691.883] (**) Option "xkb_layout" "ch" [ 85691.883] (**) Option "xkb_variant" "de_nodeadkeys" [ 85691.883] (**) Option "xkb_options" "compose:menu" [ 85691.884] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 85691.884] (II) No input driver specified, ignoring this device. [ 85691.884] (II) This device may have been added with another device file. [ 85691.884] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 85691.884] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 85691.884] (II) Using input driver 'evdev' for 'Sleep Button' [ 85691.884] (**) Sleep Button: always reports core events [ 85691.884] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 85691.884] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 85691.885] (--) evdev: Sleep Button: Found keys [ 85691.885] (II) evdev: Sleep Button: Configuring as keyboard [ 85691.885] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 85691.885] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 85691.885] (**) Option "xkb_rules" "evdev" [ 85691.885] (**) Option "xkb_model" "pc105" [ 85691.885] (**) Option "xkb_layout" "ch" [ 85691.885] (**) Option "xkb_variant" "de_nodeadkeys" [ 85691.885] (**) Option "xkb_options" "compose:menu" [ 85691.885] (II) config/udev: Adding drm device (/dev/dri/card0) [ 85691.885] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event7) [ 85691.886] (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall" [ 85691.886] (II) Using input driver 'evdev' for 'Logitech USB RECEIVER' [ 85691.886] (**) Logitech USB RECEIVER: always reports core events [ 85691.886] (**) evdev: Logitech USB RECEIVER: Device: "/dev/input/event7" [ 85691.886] (--) evdev: Logitech USB RECEIVER: Vendor 0x46d Product 0xc50e [ 85691.886] (--) evdev: Logitech USB RECEIVER: Found 20 mouse buttons [ 85691.886] (--) evdev: Logitech USB RECEIVER: Found scroll wheel(s) [ 85691.886] (--) evdev: Logitech USB RECEIVER: Found relative axes [ 85691.886] (--) evdev: Logitech USB RECEIVER: Found x and y relative axes [ 85691.886] (II) evdev: Logitech USB RECEIVER: Configuring as mouse [ 85691.886] (II) evdev: Logitech USB RECEIVER: Adding scrollwheel support [ 85691.886] (**) evdev: Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5 [ 85691.886] (**) evdev: Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 85691.886] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/event7" [ 85691.886] (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE, id 9) [ 85691.886] (II) evdev: Logitech USB RECEIVER: initialized for relative axes. [ 85691.886] (**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1 [ 85691.886] (**) Logitech USB RECEIVER: (accel) acceleration profile 0 [ 85691.886] (**) Logitech USB RECEIVER: (accel) acceleration factor: 2.000 [ 85691.886] (**) Logitech USB RECEIVER: (accel) acceleration threshold: 4 [ 85691.887] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse1) [ 85691.887] (II) No input driver specified, ignoring this device. [ 85691.887] (II) This device may have been added with another device file. [ 85691.887] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 85691.887] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 85691.887] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 85691.887] (**) AT Translated Set 2 keyboard: always reports core events [ 85691.887] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 85691.887] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 85691.887] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 85691.887] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 85691.887] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 85691.887] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 85691.887] (**) Option "xkb_rules" "evdev" [ 85691.887] (**) Option "xkb_model" "pc105" [ 85691.887] (**) Option "xkb_layout" "ch" [ 85691.887] (**) Option "xkb_variant" "de_nodeadkeys" [ 85691.887] (**) Option "xkb_options" "compose:menu" [ 85691.888] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 85691.888] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 85691.888] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 85691.888] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 85691.888] (II) LoadModule: "synaptics" [ 85691.888] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 85691.888] (II) Module synaptics: vendor="X.Org Foundation" [ 85691.888] compiled for 1.15.0, module version = 1.7.3 [ 85691.888] Module class: X.Org XInput Driver [ 85691.889] ABI class: X.Org XInput driver, version 20.0 [ 85691.889] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 85691.889] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 85691.889] (**) Option "Device" "/dev/input/event6" [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 58) [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 88) [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 85691.889] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 85691.889] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6" [ 85691.889] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 85691.889] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 85691.889] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 85691.889] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040 [ 85691.889] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 85691.890] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 85691.890] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 85691.890] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 85691.890] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 85691.890] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 85691.890] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 85691.890] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 85691.890] (II) No input driver specified, ignoring this device. [ 85691.890] (II) This device may have been added with another device file. [ 85691.891] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8) [ 85691.891] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 85691.891] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 85691.891] (**) ACPI Virtual Keyboard Device: always reports core events [ 85691.891] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event8" [ 85691.891] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 85691.891] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 85691.891] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 85691.891] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8" [ 85691.891] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12) [ 85691.891] (**) Option "xkb_rules" "evdev" [ 85691.891] (**) Option "xkb_model" "pc105" [ 85691.891] (**) Option "xkb_layout" "ch" [ 85691.891] (**) Option "xkb_variant" "de_nodeadkeys" [ 85691.891] (**) Option "xkb_options" "compose:menu" udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=987192 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 E: DMI_VENDOR=Acer, inc. E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=506497 E: XKBLAYOUT=ch E: XKBMODEL=pc105 E: XKBOPTIONS=compose:menu E: XKBVARIANT=de_nodeadkeys P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=983559 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2 N: input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2 E: DMI_VENDOR=Acer, inc. E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=503393 E: XKBLAYOUT=ch E: XKBMODEL=pc105 E: XKBOPTIONS=compose:menu E: XKBVARIANT=de_nodeadkeys P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=982006 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1 N: input/event1 E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=502514 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=986342 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 E: DMI_VENDOR=Acer, inc. E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=504933 E: XKBLAYOUT=ch E: XKBMODEL=pc105 E: XKBOPTIONS=compose:menu E: XKBVARIANT=de_nodeadkeys P: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9 E: EV=20017 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_03_0-usb-0_2_1_0 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_RECEIVER E: ID_MODEL_ENC=USB\x20RECEIVER E: ID_MODEL_ID=c50e E: ID_PATH=pci-0000:00:03.0-usb-0:2:1.0 E: ID_PATH_TAG=pci-0000_00_03_0-usb-0_2_1_0 E: ID_REVISION=2510 E: ID_SERIAL=Logitech_USB_RECEIVER E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: KEY=ffff0000 0 0 0 0 E: LED=ff00 E: MODALIAS=input:b0003v046DpC50Ee0111-e0,1,2,4,11,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,l8,9,A,B,C,D,E,sfw E: MSC=10 E: NAME="Logitech USB RECEIVER" E: PHYS="usb-0000:00:03.0-2/input0" E: PRODUCT=3/46d/c50e/111 E: PROP=0 E: REL=143 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=79423042586 P: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/event7 N: input/event7 S: input/by-id/usb-Logitech_USB_RECEIVER-event-mouse S: input/by-path/pci-0000:00:03.0-usb-0:2:1.0-event-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_RECEIVER-event-mouse /dev/input/by-path/pci-0000:00:03.0-usb-0:2:1.0-event-mouse E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/event7 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_RECEIVER E: ID_MODEL_ENC=USB\x20RECEIVER E: ID_MODEL_ID=c50e E: ID_PATH=pci-0000:00:03.0-usb-0:2:1.0 E: ID_PATH_TAG=pci-0000_00_03_0-usb-0_2_1_0 E: ID_REVISION=2510 E: ID_SERIAL=Logitech_USB_RECEIVER E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=423043249 P: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/mouse1 N: input/mouse1 S: input/by-id/usb-Logitech_USB_RECEIVER-mouse S: input/by-path/pci-0000:00:03.0-usb-0:2:1.0-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_RECEIVER-mouse /dev/input/by-path/pci-0000:00:03.0-usb-0:2:1.0-mouse E: DEVNAME=/dev/input/mouse1 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/mouse1 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_RECEIVER E: ID_MODEL_ENC=USB\x20RECEIVER E: ID_MODEL_ID=c50e E: ID_PATH=pci-0000:00:03.0-usb-0:2:1.0 E: ID_PATH_TAG=pci-0000_00_03_0-usb-0_2_1_0 E: ID_REVISION=2510 E: ID_SERIAL=Logitech_USB_RECEIVER E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=33 E: SUBSYSTEM=input E: USEC_INITIALIZED=423042860 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=10000 c020000000000 0 0 700f02000003 3803078f830f401 febfffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8D,8E,8F,94,95,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C0,C1,D9,E0,E1,E2,E3,EC,ED,EE,1A9,1B2,1B3,1D0,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=770239 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=Acer, inc. E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=501645 E: XKBLAYOUT=ch E: XKBMODEL=pc105 E: XKBOPTIONS=compose:menu E: XKBVARIANT=de_nodeadkeys P: /devices/platform/i8042/serio1/input/input6 E: ABS=11000003 E: DEVPATH=/devices/platform/i8042/serio1/input/input6 E: EV=b E: ID_FOR_SEAT=input-platform-i8042-serio-1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=6420 3000f 0 0 0 0 E: MODALIAS=input:b0011v0002p0007e12B1-e0,1,3,k100,101,102,103,110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw E: NAME="SynPS/2 Synaptics TouchPad" E: PHYS="isa0060/serio1/input0" E: PRODUCT=11/2/7/12b1 E: PROP=1 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=292465 P: /devices/platform/i8042/serio1/input/input6/event6 N: input/event6 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=292883 P: /devices/platform/i8042/serio1/input/input6/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-1-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=292717 P: /devices/platform/pcspkr/input/input5 E: DEVPATH=/devices/platform/pcspkr/input/input5 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=707379 P: /devices/platform/pcspkr/input/input5/event5 N: input/event5 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/platform/pcspkr/input/input5/event5 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: USEC_INITIALIZED=708332 P: /devices/virtual/input/input8 E: DEVPATH=/devices/virtual/input/input8 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw E: NAME="ACPI Virtual Keyboard Device" E: PRODUCT=3/0/0/4 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=957615 P: /devices/virtual/input/input8/event8 N: input/event8 E: BACKSPACE=guess E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/virtual/input/input8/event8 E: DMI_VENDOR=Acer, inc. E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=960145 E: XKBLAYOUT=ch E: XKBMODEL=pc105 E: XKBOPTIONS=compose:menu E: XKBVARIANT=de_nodeadkeys DRM Information from dmesg: --------------------------- [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE f38) [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE f38) [ 0.742871] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760] [ 0.744644] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000 [ 0.763142] Linux agpgart interface v0.103 [ 25.011906] [drm] Initialized drm 1.1.0 20060810 [ 25.057758] [drm] Initialized sis 1.3.0 20070626 for 0000:01:00.0 on minor 0 -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable-updates'), (300, 'unstable'), (200, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.11-1-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-fbdev depends on: ii libc6 2.18-4 ii xserver-xorg-core [xorg-video-abi-15] 2:1.15.0-2 xserver-xorg-video-fbdev recommends no packages. xserver-xorg-video-fbdev suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org