Package: src:linux
Version: 3.2.57-3
Severity: important

Dear Maintainer,

We were copying large (33G) file over 1G link using scp, but scp stalled for
some reason after 16G and was killed on source machine. Then we tried to remove
partial file on destination machine but during this process machine became
almost unresponsive (LA about 10, iowait 20-30%, the rest % were idle), dmesg
showed the log below, and as the machine did not reboot after /sbin/reboot it
was rebooted using sys-rq.


-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 
root=UUID=a4d2a5df-8a06-46ce-bf5c-e1c671729c4f ro nomodeset

** Not tainted

** Kernel log:
Apr 30 10:55:14 db3 kernel: [167405.430964] BUG: unable to handle kernel paging 
request at 0000000000001b90
Apr 30 10:55:14 db3 kernel: [167405.430992] IP: [<ffffffff810b4722>] 
page_waitqueue+0x33/0x48
Apr 30 10:55:14 db3 kernel: [167405.431018] PGD 0 
Apr 30 10:55:14 db3 kernel: [167405.431035] Oops: 0000 [#1] SMP 
Apr 30 10:55:14 db3 kernel: [167405.431054] CPU 1 
Apr 30 10:55:14 db3 kernel: [167405.431058] Modules linked in: ip6table_filter 
ip6_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc xt_tcpudp xt_state 
iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack 
iptable_filter ip_tables x_tables cpufreq_conservative cpufreq_userspace 
cpufreq_powersave cpufreq_stats ext3 jbd loop i2c_i801 mxm_wmi i2c_core 
parport_pc evdev wmi parport coretemp acpi_cpufreq mperf shpchp iTCO_wdt 
iTCO_vendor_support crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 
aes_generic cryptd processor video button ext4 crc16 jbd2 mbcache btrfs crc32c 
libcrc32c zlib_deflate dm_mod raid1 md_mod microcode sg sd_mod crc_t10dif 
xhci_hcd ahci libahci libata scsi_mod e1000e r8169 mii ehci_hcd thermal fan 
usbcore thermal_sys usb_common [last unloaded: scsi_wait_scan]
Apr 30 10:55:14 db3 kernel: [167405.431353] 
Apr 30 10:55:14 db3 kernel: [167405.431369] Pid: 13674, comm: flush-9:2 Not 
tainted 3.2.0-4-amd64 #1 Debian 3.2.57-3 MSI MS-7816/H87-G43 (MS-7816)
Apr 30 10:55:14 db3 kernel: [167405.431411] RIP: 0010:[<ffffffff810b4722>]  
[<ffffffff810b4722>] page_waitqueue+0x33/0x48
Apr 30 10:55:14 db3 kernel: [167405.431449] RSP: 0018:ffff8807fc541a38  EFLAGS: 
00010a83
Apr 30 10:55:14 db3 kernel: [167405.431470] RAX: 9e37fffffffc0001 RBX: 
ffffea000fc61aa8 RCX: 0000000000000040
Apr 30 10:55:14 db3 kernel: [167405.431505] RDX: 0000000000001500 RSI: 
ffff8807fc541a88 RDI: dcbfaae7a5261aa8
Apr 30 10:55:14 db3 kernel: [167405.431540] RBP: 0000000000280000 R08: 
ffff8807fc5419a0 R09: 0000000000000000
Apr 30 10:55:14 db3 kernel: [167405.431574] R10: 0000000000016628 R11: 
0000000000016628 R12: ffff8807b000b598
Apr 30 10:55:14 db3 kernel: [167405.431609] R13: 0000000000008000 R14: 
ffffea000fc61aa8 R15: 0000000000280000
Apr 30 10:55:14 db3 kernel: [167405.431645] FS:  0000000000000000(0000) 
GS:ffff88081ea40000(0000) knlGS:0000000000000000
Apr 30 10:55:14 db3 kernel: [167405.431681] CS: Apr 30 12:44:44 db3 kernel: 
imklog 5.8.11, log source = /proc/kmsg started.


** Model information
sys_vendor: MSI
product_name: MS-7816
product_version: 1.0
chassis_vendor: MSI
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: V2.14B6
board_vendor: MSI
board_name: H87-G43 (MS-7816)
board_version: 1.0

** Loaded modules:
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
xt_tcpudp
xt_state
iptable_mangle
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
iptable_filter
ip_tables
x_tables
ext3
jbd
loop
i2c_i801
coretemp
crc32c_intel
acpi_cpufreq
ghash_clmulni_intel
iTCO_wdt
mperf
shpchp
i2c_core
iTCO_vendor_support
parport_pc
aesni_intel
button
video
processor
evdev
parport
aes_x86_64
mxm_wmi
wmi
aes_generic
cryptd
ext4
crc16
jbd2
mbcache
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
raid1
md_mod
microcode
sg
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
e1000e
ehci_hcd
fan
thermal
thermal_sys
xhci_hcd
usbcore
r8169
usb_common
mii

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM Controller 
[8086:0c00] (rev 06)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell Integrated 
Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a4] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-

00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB xHCI Host 
Controller [8086:8c31] (rev 05) (prog-if 30 [XHCI])
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
                Address: 00000000fee00338  Data: 0000
        Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation Lynx Point MEI 
Controller #1 [8086:8c3a] (rev 04)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f7d16000 (64-bit, non-prefetchable) [size=16]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000

00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host 
Controller #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7d14000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port 
#1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: df200000-df3fffff
        Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surprise+
                        Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device 
[1462:7816]
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port 
#2 [8086:8c12] (rev d5) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<512ns, L1 <16us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device 
[1462:7816]
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
d5) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<1us, L1 <16us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device 
[1462:7816]
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.4 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port 
#5 [8086:8c18] (rev d5) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f7c00000-f7cfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #5, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 
<512ns, L1 <16us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device 
[1462:7816]
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host 
Controller #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7d13000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC Controller 
[8086:8c4a] (rev 05)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point 6-port SATA 
Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 47
        Region 0: I/O ports at f0b0 [size=8]
        Region 1: I/O ports at f0a0 [size=4]
        Region 2: I/O ports at f090 [size=8]
        Region 3: I/O ports at f080 [size=4]
        Region 4: I/O ports at f060 [size=32]
        Region 5: Memory at f7d12000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00358  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus Controller [8086:8c22] 
(rev 05)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f7d11000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040 [size=32]

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:7816]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: I/O ports at e000 [size=256]
        Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00318  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 unlimited, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Unknown small resource type 00, will not decode more.
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

03:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI 
Bridge [1b21:1080] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Power Management version 3
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <2us, L1 <2us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [c0] Subsystem: Micro-Star International Co., Ltd. Device 
[1462:7816]
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-

05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7cc0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at f7c00000 (32-bit, non-prefetchable) [size=512K]
        Region 2: I/O ports at d000 [size=32]
        Region 3: Memory at f7ce0000 (32-bit, non-prefetchable) [size=16K]
        Expansion ROM at f7c80000 [disabled] [size=256K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <128ns, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number 68-05-ca-ff-ff-0b-3e-ef
        Kernel driver in use: e1000e


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:8008 Intel Corp. 
Bus 004 Device 002: ID 8087:8000 Intel Corp. 


-- System Information:
Debian Release: 7.5
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.36+wheezy.1
pn  xen-hypervisor          <none>

-- debconf information excluded
Apr 29 12:50:35 db3 kernel: [87972.715322] ip_tables: (C) 2000-2006 Netfilter 
Core Team
Apr 29 12:50:35 db3 kernel: [87972.747127] nf_conntrack version 0.5.0 (16384 
buckets, 65536 max)
Apr 29 14:42:24 db3 kernel: [94678.200920] md: md0 switched to read-write mode.
Apr 29 14:42:24 db3 kernel: [94678.201070] md: resync of RAID array md0
Apr 29 14:42:24 db3 kernel: [94678.201089] md: minimum _guaranteed_  speed: 
1000 KB/sec/disk.
Apr 29 14:42:24 db3 kernel: [94678.201109] md: using maximum available idle IO 
bandwidth (but not more than 200000 KB/sec) for resync.
Apr 29 14:42:24 db3 kernel: [94678.202750] md: using 128k window, over a total 
of 16768896k.
Apr 29 14:42:24 db3 kernel: [94678.202771] md: resuming resync of md0 from 
checkpoint.
Apr 29 14:44:03 db3 kernel: [94776.483638] md: md0: resync done.
Apr 29 14:44:03 db3 kernel: [94776.817411] RAID1 conf printout:
Apr 29 14:44:03 db3 kernel: [94776.817418]  --- wd:2 rd:2
Apr 29 14:44:03 db3 kernel: [94776.817424]  disk 0, wo:0, o:1, dev:sda1
Apr 29 14:44:03 db3 kernel: [94776.817429]  disk 1, wo:0, o:1, dev:sdb1
Apr 29 16:28:22 db3 kernel: [101032.267767] RPC: Registered named UNIX socket 
transport module.
Apr 29 16:28:22 db3 kernel: [101032.267791] RPC: Registered udp transport 
module.
Apr 29 16:28:22 db3 kernel: [101032.267811] RPC: Registered tcp transport 
module.
Apr 29 16:28:22 db3 kernel: [101032.267831] RPC: Registered tcp NFSv4.1 
backchannel transport module.
Apr 29 16:28:22 db3 kernel: [101032.295709] FS-Cache: Loaded
Apr 29 16:28:22 db3 kernel: [101032.312922] FS-Cache: Netfs 'nfs' registered 
for caching
Apr 29 16:28:22 db3 kernel: [101032.325449] Installing knfsd (copyright (C) 
1996 o...@monad.swb.de).
Apr 30 10:01:23 db3 kernel: [164175.868954] ip6_tables: (C) 2000-2006 Netfilter 
Core Team
Apr 30 10:55:14 db3 kernel: [167405.430964] BUG: unable to handle kernel paging 
request at 0000000000001b90
Apr 30 10:55:14 db3 kernel: [167405.430992] IP: [<ffffffff810b4722>] 
page_waitqueue+0x33/0x48
Apr 30 10:55:14 db3 kernel: [167405.431018] PGD 0 
Apr 30 10:55:14 db3 kernel: [167405.431035] Oops: 0000 [#1] SMP 
Apr 30 10:55:14 db3 kernel: [167405.431054] CPU 1 
Apr 30 10:55:14 db3 kernel: [167405.431058] Modules linked in: ip6table_filter 
ip6_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc xt_tcpudp xt_state 
iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack 
iptable_filter ip_tables x_tables cpufreq_conservative cpufreq_userspace 
cpufreq_powersave cpufreq_stats ext3 jbd loop i2c_i801 mxm_wmi i2c_core 
parport_pc evdev wmi parport coretemp acpi_cpufreq mperf shpchp iTCO_wdt 
iTCO_vendor_support crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 
aes_generic cryptd processor video button ext4 crc16 jbd2 mbcache btrfs crc32c 
libcrc32c zlib_deflate dm_mod raid1 md_mod microcode sg sd_mod crc_t10dif 
xhci_hcd ahci libahci libata scsi_mod e1000e r8169 mii ehci_hcd thermal fan 
usbcore thermal_sys usb_common [last unloaded: scsi_wait_scan]
Apr 30 10:55:14 db3 kernel: [167405.431353] 
Apr 30 10:55:14 db3 kernel: [167405.431369] Pid: 13674, comm: flush-9:2 Not 
tainted 3.2.0-4-amd64 #1 Debian 3.2.57-3 MSI MS-7816/H87-G43 (MS-7816)
Apr 30 10:55:14 db3 kernel: [167405.431411] RIP: 0010:[<ffffffff810b4722>]  
[<ffffffff810b4722>] page_waitqueue+0x33/0x48
Apr 30 10:55:14 db3 kernel: [167405.431449] RSP: 0018:ffff8807fc541a38  EFLAGS: 
00010a83
Apr 30 10:55:14 db3 kernel: [167405.431470] RAX: 9e37fffffffc0001 RBX: 
ffffea000fc61aa8 RCX: 0000000000000040
Apr 30 10:55:14 db3 kernel: [167405.431505] RDX: 0000000000001500 RSI: 
ffff8807fc541a88 RDI: dcbfaae7a5261aa8
Apr 30 10:55:14 db3 kernel: [167405.431540] RBP: 0000000000280000 R08: 
ffff8807fc5419a0 R09: 0000000000000000
Apr 30 10:55:14 db3 kernel: [167405.431574] R10: 0000000000016628 R11: 
0000000000016628 R12: ffff8807b000b598
Apr 30 10:55:14 db3 kernel: [167405.431609] R13: 0000000000008000 R14: 
ffffea000fc61aa8 R15: 0000000000280000
Apr 30 10:55:14 db3 kernel: [167405.431645] FS:  0000000000000000(0000) 
GS:ffff88081ea40000(0000) knlGS:0000000000000000
Apr 30 10:55:14 db3 kernel: [167405.431681] CS: Apr 30 12:44:44 db3 kernel: 
imklog 5.8.11, log source = /proc/kmsg started.

Reply via email to