Package: src:linux Version: 3.14.4-1 Severity: important After upgrading from linux-image-3.13.1 to 3.14.1, the screen on my laptop (a Dell D630) is very dim to almost black. Booting to the to image 3.13-1, using grub, resolves the issue.
LSPCI: 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) -- Package-specific info: ** Version: Linux version 3.14-1-686-pae ([email protected]) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=f805755a-ee02-4e72-8971-3feaa1a8aa92 ro quiet ** Not tainted ** Kernel log: [ 7.377718] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 7.377736] excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 7.377749] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 7.377766] excluding 0xa0000000-0xa0ffffff [ 7.377779] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 7.377796] excluding 0x60000000-0x60ffffff [ 7.377808] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 7.378588] clean. [ 7.453839] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd [ 7.572863] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772 [ 7.572867] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.572869] usb 7-1.2: Product: O2Micro CCID SC Reader [ 7.572872] usb 7-1.2: Manufacturer: O2 [ 7.600295] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input10 [ 7.620706] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 8.228820] Console: switching to colour frame buffer device 160x50 [ 8.233104] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.233107] i915 0000:00:02.0: registered panic notifier [ 8.233282] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 8.233693] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input12 [ 8.233765] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 8.233792] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.386469] cfg80211: World regulatory domain updated: [ 8.386473] cfg80211: DFS Master region: unset [ 8.386474] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.386477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.386479] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.386481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 8.386482] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 8.386484] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 8.386486] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 8.800494] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 8.800562] scsi4 : usb-storage 1-3.4:1.0 [ 8.800666] usbcore: registered new interface driver usb-storage [ 9.802915] scsi 4:0:0:0: Direct-Access Seagate FreeAgent Go 102D PQ: 0 ANSI: 4 [ 9.803412] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 9.806978] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 9.808256] sd 4:0:0:0: [sdb] Write Protect is off [ 9.808262] sd 4:0:0:0: [sdb] Mode Sense: 1c 00 00 00 [ 9.809628] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.058061] sdb: sdb1 [ 10.096791] sd 4:0:0:0: [sdb] Attached SCSI disk [ 10.625784] Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k [ 10.654018] EXT4-fs (sda1): re-mounted. Opts: (null) [ 10.898711] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.475951] lp0: using parport0 (interrupt-driven). [ 11.493263] ppdev: user-space parallel port driver [ 11.522990] loop: module loaded [ 11.560315] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 11.578882] fuse init (API version 7.22) [ 11.942856] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 11.945162] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 13.865859] RPC: Registered named UNIX socket transport module. [ 13.865862] RPC: Registered udp transport module. [ 13.865864] RPC: Registered tcp transport module. [ 13.865865] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.899024] FS-Cache: Loaded [ 13.950868] FS-Cache: Netfs 'nfs' registered for caching [ 14.005768] Installing knfsd (copyright (C) 1996 [email protected]). [ 16.098759] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 21.220219] Bluetooth: Core ver 2.18 [ 21.220239] NET: Registered protocol family 31 [ 21.220241] Bluetooth: HCI device and connection manager initialized [ 21.220251] Bluetooth: HCI socket layer initialized [ 21.220254] Bluetooth: L2CAP socket layer initialized [ 21.220264] Bluetooth: SCO socket layer initialized [ 21.301845] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.301849] Bluetooth: BNEP filters: protocol multicast [ 21.301858] Bluetooth: BNEP socket layer initialized [ 21.337944] Bluetooth: RFCOMM TTY layer initialized [ 21.337951] Bluetooth: RFCOMM socket layer initialized [ 21.337957] Bluetooth: RFCOMM ver 1.11 [ 45.022771] tg3 0000:09:00.0: irq 46 for MSI/MSI-X [ 45.057983] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 46.619634] tg3 0000:09:00.0 eth0: Link is up at 100 Mbps, full duplex [ 46.619659] tg3 0000:09:00.0 eth0: Flow control is on for TX and on for RX [ 46.619703] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 47.735069] tg3 0000:09:00.0: irq 46 for MSI/MSI-X [ 47.770695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.946051] tg3 0000:09:00.0: irq 46 for MSI/MSI-X [ 47.981644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 49.689686] tg3 0000:09:00.0 eth0: Link is up at 100 Mbps, full duplex [ 49.689707] tg3 0000:09:00.0 eth0: Flow control is on for TX and on for RX [ 49.689737] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 112.771778] systemd-logind[2937]: New seat seat0. [ 112.790002] systemd-logind[2937]: Watching system buttons on /dev/input/event11 (Video Bus) [ 112.790077] systemd-logind[2937]: Watching system buttons on /dev/input/event5 (Power Button) [ 112.790146] systemd-logind[2937]: Watching system buttons on /dev/input/event4 (Lid Switch) [ 112.790217] systemd-logind[2937]: Watching system buttons on /dev/input/event6 (Sleep Button) [ 112.790876] systemd-logind[2937]: New session 1 of user init. [ 2300.848956] systemd-logind[2937]: New session 2 of user init. [ 2300.849086] systemd-logind[2937]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. [ 4070.421110] sd 4:0:0:0: [sdb] Unhandled error code [ 4070.421117] sd 4:0:0:0: [sdb] [ 4070.421121] Result: hostbyte=DID_OK driverbyte=DRIVER_OK [ 4070.421125] sd 4:0:0:0: [sdb] CDB: [ 4070.421128] Read(10): 28 00 1b e8 00 57 00 00 08 00 [ 4070.421143] end_request: I/O error, dev sdb, sector 468189271 [ 4636.649018] perf samples too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 7897.877775] systemd-logind[2937]: New session 3 of user init. ** Model information not available ** Loaded modules: rfcomm bnep bluetooth 6lowpan_iphc binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc fuse loop ppdev lp usb_storage joydev dell_wmi iTCO_wdt iTCO_vendor_support sparse_keymap i915 tg3 pcmcia coretemp kvm_intel kvm sg dell_laptop dcdbas sr_mod yenta_socket pcmcia_rsrc cdrom firewire_ohci lpc_ich drm_kms_helper i2c_i801 pcspkr evdev mfd_core pcmcia_core ptp firewire_core drm psmouse crc_itu_t serio_raw button arc4 battery wmi pps_core libphy uhci_hcd i2c_algo_bit iwl3945 iwlegacy mac80211 cfg80211 snd_hda_codec_idt snd_hda_codec_generic parport_pc snd_hda_intel snd_hda_codec snd_hwdep snd_pcm tpm_tis tpm ehci_pci rfkill parport ehci_hcd snd_seq ac video i2c_core snd_seq_device acpi_cpufreq snd_timer usbcore snd processor usb_common soundcore ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic thermal thermal_sys ata_piix libata scsi_mod ** Network interface configuration: auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:1f:3c:bf:15:cd brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:21:70:ab:37:d1 brd ff:ff:ff:ff:ff:ff inet 192.168.10.254/24 brd 192.168.10.255 scope global eth0 valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lo: 62647974 111200 0 0 0 0 0 0 62647974 111200 0 0 0 0 0 0 eth0: 14693640 73334 0 0 0 0 0 4343 66262154 93854 0 0 0 0 0 0 *** Protocol statistics: Ip: 177191 total packets received 0 forwarded 0 incoming packets discarded 177191 incoming packets delivered 185183 requests sent out 27 outgoing packets dropped 111 dropped because of missing route Icmp: 58 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 58 58 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 58 IcmpMsg: InType3: 58 OutType3: 58 Tcp: 58 active connections openings 32 passive connection openings 9 failed connection attempts 7 connection resets received 4 connections established 172184 segments received 204117 segments send out 19 segments retransmited 0 bad segments received. 15 resets sent Udp: 622 packets received 58 packets to unknown port received. 0 packet receive errors 495 packets sent UdpLite: TcpExt: 1 invalid SYN cookies received 27 TCP sockets finished time wait in fast timer 3598 delayed acks sent 6 delayed acks further delayed because of locked socket Quick ack mode was activated 19 times 84905 packet headers predicted 20305 acknowledgments not containing data payload received 50578 predicted acknowledgments 4 other TCP timeouts TCPLossProbes: 98 TCPLossProbeRecovery: 91 20 DSACKs sent for old packets 98 DSACKs received 5 connections reset due to early user close TCPDSACKIgnoredNoUndo: 92 TCPRcvCoalesce: 2077 TCPOFOQueue: 613 TCPSpuriousRtxHostQueues: 5 TCPAutoCorking: 2612 IpExt: InMcastPkts: 4384 OutMcastPkts: 112 InBcastPkts: 111 InOctets: 75686349 OutOctets: 126349136 InMcastOctets: 2244196 OutMcastOctets: 7811 InBcastOctets: 12750 InNoECTPkts: 177240 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Latitude D630 [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at f6e00000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at efe8 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f6f00000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f20 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f00 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: Dell Dell Latitude D630 [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f6dfc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4000000-f41fffff Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f6c00000-f6cfffff Prefetchable memory behind bridge: 00000000f4400000-00000000f45fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f6b00000-f6bfffff Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: f6a00000-f6afffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 6fa0 [size=16] Kernel driver in use: ata_piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 6eb0 [size=8] Region 1: I/O ports at 6eb8 [size=4] Region 2: I/O ports at 6ec0 [size=8] Region 3: I/O ports at 6ec8 [size=4] Region 4: I/O ports at 6ee0 [size=16] Region 5: I/O ports at eff0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at f6dfbf00 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus 03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: f0000000-f3ffffff (prefetchable) Memory window 1: f4c00000-f4ffffff I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: <access denied> Kernel driver in use: yenta_cardbus 03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f6aff000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at f6afe800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f6bf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1020] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f6cff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 ** USB devices: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0bc2:2100 Seagate RSS LLC Bus 001 Device 002: ID 413c:0058 Dell Computer Corp. Port Replicator Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (650, 'testing'), (600, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.14-1-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.14-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 16-2 ii linux-base 3.5 ii module-init-tools 16-2 Versions of packages linux-image-3.14-1-686-pae recommends: ii firmware-linux-free 3.3 ii libc6-i686 2.18-5 Versions of packages linux-image-3.14-1-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.14 <none> Versions of packages linux-image-3.14-1-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.14-1-686-pae/postinst/depmod-error-initrd-3.14-1-686-pae: false linux-image-3.14-1-686-pae/prerm/removing-running-kernel-3.14-1-686-pae: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
