Package: src:linux Version: 3.14.12-1 Severity: normal Hi I decided to return on free driver nouveau and after many try. Fore more informations see here http://nouveau.freedesktop.org/wiki/KernelModuleParameters/ On my fail to start X server with engine SW. On /etc/default/grub edit GRUB_CMDLINE_LINUX_DEFAULT="quiet nouveau.config="SW=0"" on order to disable SW engine. When SW engine is enabled on default, break to start enlightenment, kde, gdm3, gnome3.
-- Package-specific info: ** Version: Linux version 3.14-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-4) ) #1 SMP Debian 3.14.12-1 (2014-07-11) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=/dev/mapper/debian-root ro quiet nouveau.config=DEVICE=1 nouveau.config=DMAOBJ=1 nouveau.config=PBSP=1 nouveau.config=PCEO=1 nouveau.config=PCE1=1 nouveau.config=PCE2=1 nouveau.config=PCRYPT=1 nouveau.config=PDISP=1 nouveau.config=PFIFO=1 nouveau.config=PGRAPH=1 nouveau.config=PMPEG=1 nouveau.config=PPM=1 nouveau.config=PPPP=1 nouveau.config=PVP=1 nouveau.config=SW=0 ** Not tainted ** Kernel log: [ 7.822850] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 7.831427] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 7.831482] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 7.831532] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 7.831581] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.831632] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.831682] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 7.831730] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 7.831779] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 8.088546] input: PC Speaker as /devices/platform/pcspkr/input/input14 [ 8.099052] wmi: Mapper loaded [ 8.199563] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 8.229049] [drm] hdmi device not found 1 0 1 [ 8.229185] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x046f00a3 [ 8.229188] nouveau [ DEVICE][0000:01:00.0] Chipset: G72 (NV46) [ 8.229190] nouveau [ DEVICE][0000:01:00.0] Family : NV40 [ 8.230759] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 8.307500] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 8.307506] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 8.307640] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 8.307644] nouveau [ VBIOS][0000:01:00.0] version 05.72.22.43.00 [ 8.307679] iTCO_vendor_support: vendor-support=0 [ 8.308193] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 8.308240] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 8.308560] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.309455] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X [ 8.309470] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 8.309505] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 [ 8.309508] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB [ 8.309510] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 8.403278] cdc_acm 7-6:1.1: This device cannot do calls on its own. It is not a modem. [ 8.403471] cdc_acm 7-6:1.1: ttyACM0: USB ACM device [ 8.404478] usbcore: registered new interface driver cdc_acm [ 8.404482] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 8.443956] coretemp coretemp.0: Using relative temperature scale! [ 8.443974] coretemp coretemp.0: Using relative temperature scale! [ 9.596033] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 9.596045] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 9.596049] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 9.615961] nouveau [ PTHERM][0000:01:00.0] temperature (94 C) hit the 'fanboost' threshold [ 9.616019] nouveau [ CLK][0000:01:00.0] 20: core 550 MHz shader 550 MHz memory 540 MHz [ 9.616030] nouveau [ CLK][0000:01:00.0] --: core 199 MHz memory 391 MHz [ 9.616143] [TTM] Zone kernel: Available graphics memory: 2029410 kiB [ 9.616146] [TTM] Initializing pool allocator [ 9.616153] [TTM] Initializing DMA pool allocator [ 9.616172] nouveau [ DRM] VRAM: 252 MiB [ 9.616174] nouveau [ DRM] GART: 512 MiB [ 9.616179] nouveau [ DRM] TMDS table version 1.1 [ 9.616182] nouveau W[ DRM] TMDS table script pointers not stubbed [ 9.616184] nouveau [ DRM] DCB version 3.0 [ 9.616187] nouveau [ DRM] DCB outp 00: 01000300 00000028 [ 9.616190] nouveau [ DRM] DCB outp 01: 02011310 00000028 [ 9.616192] nouveau [ DRM] DCB outp 02: 01011312 00000000 [ 9.616194] nouveau [ DRM] DCB outp 03: 020223f1 00c0c080 [ 9.616196] nouveau [ DRM] DCB conn 00: 0000 [ 9.616199] nouveau [ DRM] DCB conn 01: 1130 [ 9.616202] nouveau [ DRM] DCB conn 02: 0210 [ 9.616204] nouveau [ DRM] DCB conn 03: 0211 [ 9.616206] nouveau [ DRM] DCB conn 04: 0213 [ 9.616421] nouveau [ DRM] Saving VGA fonts [ 9.676053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.676058] [drm] Driver supports precise vblank timestamp query. [ 9.676133] nouveau [ DRM] 0xD4A7: Parsing digital output script table [ 9.727430] nouveau E[ DRM] failed to allocate software object, -22 [ 9.727804] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3) [ 9.815127] nouveau [ DRM] allocated 1280x1024 fb: 0x8000, bo ffff8800365edc00 [ 9.815324] fbcon: nouveaufb (fb0) is primary device [ 9.838307] nouveau [ DRM] 0xD4A7: Parsing digital output script table [ 9.892860] Console: switching to colour frame buffer device 160x64 [ 9.897551] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 9.897554] nouveau 0000:01:00.0: registered panic notifier [ 9.897566] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 10.184055] floppy0: no floppy controllers found [ 10.474232] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 10.615930] nouveau [ PTHERM][0000:01:00.0] temperature (95 C) hit the 'downclock' threshold [ 10.778779] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.950226] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 10.959093] systemd-journald[161]: Received request to flush runtime journal from PID 1 [ 11.020392] Adding 3903484k swap on /dev/mapper/debian-swap. Priority:-1 extents:1 across:3903484k [ 12.021660] RPC: Registered named UNIX socket transport module. [ 12.021666] RPC: Registered udp transport module. [ 12.021668] RPC: Registered tcp transport module. [ 12.021670] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.033364] FS-Cache: Loaded [ 12.051220] FS-Cache: Netfs 'nfs' registered for caching [ 12.087789] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 16.525736] cfg80211: Calling CRDA to update world regulatory domain [ 16.958832] 8139too 0000:05:01.0 eth0: link down [ 16.959750] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.963006] atl1 0000:02:00.0: irq 46 for MSI/MSI-X [ 16.963135] atl1 0000:02:00.0: eth1 link is up 100 Mbps full duplex [ 17.481299] cfg80211: World regulatory domain updated: [ 17.481306] cfg80211: DFS Master region: unset [ 17.481308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.481310] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 17.481313] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 17.481315] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 17.481317] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 17.481319] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 17.481321] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) ** Model information sys_vendor: System manufacturer product_name: P5K SE product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1402 board_vendor: ASUSTeK Computer INC. board_name: P5K SE board_version: Rev 1.xx ** Loaded modules: cfg80211 rfkill binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc coretemp cdc_acm iTCO_wdt iTCO_vendor_support nouveau evdev snd_ca0106 snd_rawmidi snd_seq_device snd_ac97_codec ac97_bus mxm_wmi wmi pcspkr serio_raw video lpc_ich snd_hda_codec_realtek mfd_core ttm snd_hda_codec_generic i2c_i801 drm_kms_helper drm i2c_algo_bit i2c_core snd_hda_intel snd_hda_codec snd_hwdep asus_atk0110 snd_pcm snd_timer snd soundcore shpchp button acpi_cpufreq processor thermal_sys loop fuse autofs4 ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid hid sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ata_generic usb_storage ata_piix pata_marvell ahci 8139too libahci 8139cp libata scsi_mod atl1 mii ehci_pci uhci_hcd ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fc000000-fe8fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at cc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f03fffff Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at ac00 [size=4] Region 2: I/O ports at a880 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a480 [size=16] Region 5: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at b880 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at b480 [size=16] Region 5: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:81f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82a2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell 05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007] Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=32] Capabilities: <access denied> Kernel driver in use: snd_ca0106 05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at febe0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 8139too ** USB devices: Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 004: ID 04e8:685e Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II] (USB Debugging mode) Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button) Bus 001 Device 002: ID 04ca:0022 Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.14-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 18-1 ii linux-base 3.5 ii module-init-tools 18-1 Versions of packages linux-image-3.14-1-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.14-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.14 <none> Versions of packages linux-image-3.14-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org