Package: net-tools
Version: 1.60-26
Severity: normal
Hey.
Not sure if this is intended/expected, but it seems that while ifconfig
shows secondary IPv6 addresses, it doesn't show secondary v4 addresses:
e.g.:
# ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 00:19:db:32:06:7f brd ff:ff:ff:ff:ff:ff
inet 11.22.33.199/27 brd 11.22.33.223 scope global eth0
valid_lft forever preferred_lft forever
inet 11.22.33.204/27 brd 11.22.33.223 scope global secondary eth0
valid_lft forever preferred_lft forever
inet 11.22.33.211/27 brd 11.22.33.223 scope global secondary eth0
valid_lft forever preferred_lft forever
inet 11.22.33.214/27 brd 11.22.33.223 scope global secondary eth0
valid_lft forever preferred_lft forever
inet6 aa:bb:cc:dd::c:1000/64 scope global deprecated
valid_lft forever preferred_lft 0sec
inet6 aa:bb:cc:dd::c:0/64 scope global deprecated
valid_lft forever preferred_lft 0sec
inet6 aa:bb:cc:dd::b:0/64 scope global deprecated
valid_lft forever preferred_lft 0sec
inet6 aa:bb:cc:dd::a:0/64 scope global deprecated
valid_lft forever preferred_lft 0sec
inet6 aa:bb:cc:dd::2:2/64 scope global deprecated
valid_lft forever preferred_lft 0sec
inet6 aa:bb:cc:dd::2:0/64 scope global deprecated
valid_lft forever preferred_lft 0sec
inet6 aa:bb:cc:dd::1:0/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::219:dbff:fe32:67f/64 scope link
valid_lft forever preferred_lft forever
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:19:db:32:06:7f
inet addr:11.22.33.199 Bcast:11.22.33.223 Mask:255.255.255.224
inet6 addr: aa:bb:cc:dd::1:0/64 Scope:Global
inet6 addr: aa:bb:cc:dd::b:0/64 Scope:Global
inet6 addr: fe80::219:dbff:fe32:67f/64 Scope:Link
inet6 addr: aa:bb:cc:dd::a:0/64 Scope:Global
inet6 addr: aa:bb:cc:dd::2:2/64 Scope:Global
inet6 addr: aa:bb:cc:dd::2:0/64 Scope:Global
inet6 addr: aa:bb:cc:dd::c:1000/64 Scope:Global
inet6 addr: aa:bb:cc:dd::c:0/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4237 errors:0 dropped:0 overruns:0 frame:0
TX packets:5063 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1132860 (1.0 MiB) TX bytes:3513622 (3.3 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1905 errors:0 dropped:0 overruns:0 frame:0
TX packets:1905 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1782284 (1.6 MiB) TX bytes:1782284 (1.6 MiB)
The above uses this /e/n/interfaces:
allow-auto lo
allow-auto eth0
iface lo inet loopback
iface eth0 inet static
address 11.22.33.199
netmask 255.255.255.224
gateway 11.22.33.193
iface eth0 inet static
address 11.22.33.204
netmask 255.255.255.224
iface eth0 inet static
address 11.22.33.211
netmask 255.255.255.224
iface eth0 inet static
address 11.22.33.214
netmask 255.255.255.224
iface eth0 inet6 static
address aa:bb:cc:dd::1:0
netmask 64
gateway fe80::1
iface eth0 inet6 static
address aa:bb:cc:dd::2:0
netmask 64
preferred-lifetime 0
iface eth0 inet6 static
address aa:bb:cc:dd::2:2
netmask 64
preferred-lifetime 0
iface eth0 inet6 static
address aa:bb:cc:dd::A:0
netmask 64
preferred-lifetime 0
iface eth0 inet6 static
address aa:bb:cc:dd::B:0
netmask 64
preferred-lifetime 0
iface eth0 inet6 static
address aa:bb:cc:dd::C:0
netmask 64
preferred-lifetime 0
iface eth0 inet6 static
address aa:bb:cc:dd::C:1000
netmask 64
preferred-lifetime 0
(I changed the addresses for privacy reasons).
Cheers,
Chris.
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_DE.utf8, LC_CTYPE=en_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages net-tools depends on:
ii libc6 2.19-12
net-tools recommends no packages.
net-tools suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
