Subject: linux-image-3.2.0-4-686-pae: system hang when syncing raid5 w mdadm &
acpi_cpufreq changes freq on Intel Avoton C2750 8core
Package: src:linux
Version: 3.2.63-2
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* 1) What led up to the situation?
* 2) What exactly did you do (or not do) that was effective (or ineffective)?
* 3) What was the outcome of this action?
* 4) What outcome did you expect instead?
*** End of the template - remove these lines ***
1) After reboot, mdadm will check the raid md devices. If not clean, a new sync
process will run. On /dev/md2, it will fail and halt the machine.
2) Setting /dev/md2 not active, will keep the system alive. Activating md2 with
mdadm will ultimately lead to system hang.
3) Unresponsive system, the console continously showing kernel message,
involving disks and acpi_cpufreq related messages.
4) no system hang or error
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae
root=UUID=31701e60-fe6e-4e02-b6ad-64cf821a6322 ro quiet
** Not tainted
** Kernel log:
[ 4.429655] md: bind<sdc>
[ 4.431028] md/raid1:md1: not clean -- starting background reconstruction
[ 4.431033] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.431063] md1: detected capacity change from 0 to 1000070512640
[ 4.440749] md1: unknown partition table
[ 4.447647] md: md2 stopped.
[ 4.448838] md: bind<sdf>
[ 4.449008] md: bind<sdg>
[ 4.449191] md: bind<sdh>
[ 4.449373] md: bind<sde>
[ 4.517629] raid6: int32x1 563 MB/s
[ 4.585535] raid6: int32x2 547 MB/s
[ 4.653437] raid6: int32x4 495 MB/s
[ 4.721319] raid6: int32x8 457 MB/s
[ 4.789153] raid6: mmxx1 1600 MB/s
[ 4.857030] raid6: mmxx2 2134 MB/s
[ 4.924925] raid6: sse1x1 1619 MB/s
[ 4.992828] raid6: sse1x2 1812 MB/s
[ 5.060725] raid6: sse2x1 3203 MB/s
[ 5.128605] raid6: sse2x2 3597 MB/s
[ 5.128608] raid6: using algorithm sse2x2 (3597 MB/s)
[ 5.128877] async_tx: api initialized (async)
[ 5.129094] xor: automatically using best checksumming function: pIII_sse
[ 5.148575] pIII_sse : 7489.000 MB/sec
[ 5.148579] xor: using function: pIII_sse (7489.000 MB/sec)
[ 5.149844] md: raid6 personality registered for level 6
[ 5.149848] md: raid5 personality registered for level 5
[ 5.149850] md: raid4 personality registered for level 4
[ 5.150224] md/raid:md2: device sde operational as raid disk 0
[ 5.150228] md/raid:md2: device sdh operational as raid disk 3
[ 5.150231] md/raid:md2: device sdg operational as raid disk 2
[ 5.150234] md/raid:md2: device sdf operational as raid disk 1
[ 5.150630] md/raid:md2: allocated 4216kB
[ 5.150670] md/raid:md2: raid level 5 active with 4 out of 4 devices,
algorithm 2
[ 5.150673] RAID conf printout:
[ 5.150675] --- level:5 rd:4 wd:4
[ 5.150678] disk 0, o:1, dev:sde
[ 5.150680] disk 1, o:1, dev:sdf
[ 5.150683] disk 2, o:1, dev:sdg
[ 5.150685] disk 3, o:1, dev:sdh
[ 5.150724] md2: detected capacity change from 0 to 3000211341312
[ 5.155455] device-mapper: uevent: version 1.0.3
[ 5.155546] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 5.210738] md2: unknown partition table
[ 5.472182] PM: Starting manual resume from disk
[ 5.472187] PM: Hibernation image partition 8:5 present
[ 5.472190] PM: Looking for hibernation image.
[ 5.472454] PM: Image not found (code -22)
[ 5.472457] PM: Hibernation image not present or could not be loaded.
[ 5.483234] EXT4-fs (md0): INFO: recovery required on readonly filesystem
[ 5.483239] EXT4-fs (md0): write access will be enabled during recovery
[ 9.377634] EXT4-fs (md0): orphan cleanup on readonly fs
[ 9.377646] EXT4-fs (md0): ext4_orphan_cleanup: deleting unreferenced inode
527750
[ 9.377740] EXT4-fs (md0): 1 orphan inode deleted
[ 9.377743] EXT4-fs (md0): recovery complete
[ 9.494446] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
(null)
[ 11.765192] udevd[459]: starting version 175
[ 12.162959] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.219132] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 12.219217] ACPI: Power Button [PWRF]
[ 12.225798] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 12.321898] ACPI: Requesting acpi_cpufreq
[ 12.322837] Monitor-Mwait will be used to enter C-1 state
[ 12.322863] Monitor-Mwait will be used to enter C-2 state
[ 12.322879] ACPI: acpi_idle registered with cpuidle
[ 12.704911] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.925089] Adding 3212284k swap on /dev/sda5. Priority:-1 extents:1
across:3212284k
[ 13.932069] EXT4-fs (md0): re-mounted. Opts: (null)
[ 14.240822] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ 14.407834] loop: module loaded
[ 14.446123] w83627ehf: Found NCT6776F chip at 0x290
[ 16.705554] md: resync of RAID array md1
[ 16.705559] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 16.705562] md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for resync.
[ 16.705568] md: using 128k window, over a total of 976631360k.
[ 17.406810] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts:
acl,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0
[ 17.583124] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 17.584989] SGI XFS Quota Management subsystem
[ 17.606087] XFS (md2): Mounting Filesystem
[ 17.928974] XFS (md2): Starting recovery (logdev: internal)
[ 18.447780] XFS (md2): Ending recovery (logdev: internal)
[ 19.155470] ADDRCONF(NETDEV_UP): lo: link is not ready
[ 23.103111] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 23.941716] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.149378] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 26.150139] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.235221] igb: eth0 NIC Link is Down
[ 30.323035] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 31.425743] igb: eth0 NIC Link is Down
[ 34.404756] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 35.519407] igb: eth0 NIC Link is Down
[ 37.879447] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 40.059875] RPC: Registered named UNIX socket transport module.
[ 40.059879] RPC: Registered udp transport module.
[ 40.059881] RPC: Registered tcp transport module.
[ 40.059883] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 40.142827] FS-Cache: Loaded
[ 40.186655] FS-Cache: Netfs 'nfs' registered for caching
[ 40.198519] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 45.184368] Software Watchdog Timer: 0.07 initialized. soft_noboot=0
soft_margin=60 sec soft_panic=0 (nowayout= 0)
** Model information
not available
** Loaded modules:
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
softdog
quota_v2
quota_tree
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
xfs
w83627ehf
hwmon_vid
loop
snd_pcm
coretemp
snd_page_alloc
snd_timer
crc32c_intel
aesni_intel
aes_i586
snd
aes_generic
soundcore
cryptd
acpi_cpufreq
mperf
processor
pcspkr
button
thermal_sys
evdev
shpchp
joydev
ext4
crc16
jbd2
mbcache
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
md_mod
usbhid
hid
sg
sd_mod
crc_t10dif
ehci_hcd
usbcore
usb_common
ahci
libahci
libata
igb
i2c_algo_bit
i2c_core
dca
scsi_mod
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet dhcp
auto eth1
allow-hotplug eth1
iface eth1 inet dhcp
auto eth2
allow-hotplug eth2
iface eth2 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether d0:50:99:26:51:54 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.25/24 brd 192.168.1.255 scope global eth0
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether d0:50:99:26:51:55 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 5987 70 0 0 0 0 0 0 5987
70 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 3490947 11117 0 0 0 0 0 1462 10719052
12249 0 0 0 0 0 0
*** Protocol statistics:
Ip:
10531 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
10529 incoming packets delivered
7108 requests sent out
Icmp:
10 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 10
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 10
Tcp:
13 active connections openings
6 passive connection openings
3 failed connection attempts
1 connection resets received
2 connections established
9767 segments received
11942 segments send out
0 segments retransmited
0 bad segments received.
5 resets sent
Udp:
789 packets received
0 packets to unknown port received.
0 packet receive errors
322 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
3 TCP sockets finished time wait in fast timer
57 delayed acks sent
3698 packet headers predicted
753 acknowledgments not containing data payload received
6517 predicted acknowledgments
1 connections reset due to early user close
IpExt:
InMcastPkts: 463
OutMcastPkts: 20
InBcastPkts: 56
OutBcastPkts: 30
InOctets: 3314608
OutOctets: 10282953
InMcastOctets: 75841
OutMcastOctets: 5674
InBcastOctets: 9227
OutBcastOctets: 3732
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:1f01] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: Intel Corporation Device [8086:1f10] (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at df740000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation Device [8086:1f12] (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at df720000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=02, subordinate=08, sec-latency=0
I/O behind bridge: 00009000-0000cfff
Memory behind bridge: de000000-df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation Device [8086:1f13] (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at df700000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df600000-df6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 Host bridge [0600]: Intel Corporation Device [8086:1f14] (rev 02)
Subsystem: ASRock Incorporation Device [1849:1f14]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0f.0 IOMMU [0806]: Intel Corporation Device [8086:1f16] (rev 02)
Subsystem: ASRock Incorporation Device [1849:1f16]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Capabilities: <access denied>
00:13.0 System peripheral [0880]: Intel Corporation Device [8086:1f15] (rev 02)
Subsystem: ASRock Incorporation Device [1849:1f15]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at df764000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:16.0 USB controller [0c03]: Intel Corporation Device [8086:1f2c] (rev 02)
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:1f2c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df763000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:17.0 SATA controller [0106]: Intel Corporation Device [8086:1f22] (rev 02)
(prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:1f22]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at e0d0 [size=8]
Region 1: I/O ports at e0c0 [size=4]
Region 2: I/O ports at e0b0 [size=8]
Region 3: I/O ports at e0a0 [size=4]
Region 4: I/O ports at e040 [size=32]
Region 5: Memory at df762000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:18.0 SATA controller [0106]: Intel Corporation Device [8086:1f32] (rev 02)
(prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:1f32]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 54
Region 0: I/O ports at e090 [size=8]
Region 1: I/O ports at e080 [size=4]
Region 2: I/O ports at e070 [size=8]
Region 3: I/O ports at e060 [size=4]
Region 4: I/O ports at e020 [size=32]
Region 5: Memory at df761000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1f38] (rev 02)
Subsystem: ASRock Incorporation Device [1849:1f38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:1f3c] (rev 02)
Subsystem: ASRock Incorporation Device [1849:1f3c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at df760000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at e000 [size=32]
02:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at df500000 (32-bit, non-prefetchable) [size=128K]
Bus: primary=02, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00009000-0000cfff
Memory behind bridge: de000000-df4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: df400000-df4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:05.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: de000000-df0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:07.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: df300000-df3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:09.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI
Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: df200000-df2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
04:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA
6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:9172]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: I/O ports at c040 [size=8]
Region 1: I/O ports at c030 [size=4]
Region 2: I/O ports at c020 [size=8]
Region 3: I/O ports at c010 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at df410000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at df400000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
05:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge
[1a03:1150] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: de000000-df0fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED
Graphics Family [1a03:2000] (rev 21) (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device [1849:2000]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at b000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
07:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
Connection [8086:1533] (rev 03)
Subsystem: ASRock Incorporation Device [1849:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at df300000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at a000 [size=32]
Region 3: Memory at df380000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
08:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
Connection [8086:1533] (rev 03)
Subsystem: ASRock Incorporation Device [1849:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df200000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 9000 [size=32]
Region 3: Memory at df280000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
09:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe
SATA 6Gb/s Controller [1b4b:9230] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:9230]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 61
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at df610000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at df600000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:07db Intel Corp.
Bus 001 Device 003: ID 046b:ff01 American Megatrends, Inc.
Bus 001 Device 004: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and
Mouse
-- System Information:
Debian Release: 7.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=locale: Cannot set
LC_ALL to default locale: No such file or directory
UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
pn firmware-linux-free <none>
ii libc6-i686 2.13-38+deb7u6
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
