Package: gnome-control-center
Version: 3.2.0-4-amd64
Severity: normal
Tag: Parameter settings
Patch:
Dear maintener,
I use wheezy 7 with gnome classic.
At first the gnome-control-center GUI was effective and I could run "Parameter
settings".
Then I clicked on my personal menu "Parameter settings" and the run didn't work
anymore.
I'll like that the "Parameter settings" run displays the activities provided
for wheezy.
Regards.
Additional information:
SATELLITE C70D-B Toshiba notebook AMD A8-6410 AMD Radeon R5 Graphics
Debian release:
Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
Gnome classic
gdm3
gnome-control-center 1:3.4.3.1-2
aptitude search gnome-control-center
i A gnome-control-center - Utilitaires pour configurer le bureau GNOM
i A gnome-control-center-data - configuration applets for GNOME - data fil
p gnome-control-center-dev - Utilitaires pour configurer le bureau GNOM
dominique@debian:~$ /usr/bin/gnome-control-center
(gnome-control-center:5113): Gdk-WARNING **: The program 'gnome-control-center'
received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadRequest (invalid request code or no such operation)'.
(Details: serial 146 error_code 1 request_code 153 minor_code 19)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
root@debian:/home/dominique# aptitude -s install -t wheezy-backports
gnome-control-center
Aucun paquet ne va être installé, mis à jour ou enlevé.
0 paquets mis à jour, 0 nouvellement installés, 0 à enlever et 144 non mis à
jour.
Il est nécessaire de télécharger 0 o d'archives. Après dépaquetage, 0 o seront
utilisés.
Charger/installer/enlever des paquets.
N.B.: three attachments.
dmsesg file
Xorg.0.log file
.xsession-errors file
[ 22.777]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 22.777] X Protocol Version 11, Revision 0
[ 22.777] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 22.777] Current Operating System: Linux debian 3.2.0-4-amd64 #1 SMP Debian
3.2.65-1+deb7u1 x86_64
[ 22.777] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=1ba23965-7652-4f10-a52f-41bb82fd7619 ro quiet
[ 22.777] Build Date: 09 February 2015 09:46:52AM
[ 22.777] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau
<jcris...@debian.org>)
[ 22.777] Current version of pixman: 0.26.0
[ 22.777] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.777] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.778] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 23 14:59:12
2015
[ 22.849] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.849] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.849] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.974] (==) ServerLayout "X.org Configured"
[ 22.974] (**) |-->Screen "Screen0" (0)
[ 22.974] (**) | |-->Monitor "Monitor0"
[ 22.974] (**) | |-->Device "Card0"
[ 22.974] (**) |-->Screen "Screen1" (1)
[ 22.974] (**) | |-->Monitor "Monitor1"
[ 22.975] (**) | |-->Device "Card1"
[ 22.975] (**) |-->Input Device "Mouse0"
[ 22.975] (**) |-->Input Device "Keyboard0"
[ 22.975] (==) Automatically adding devices
[ 22.975] (==) Automatically enabling devices
[ 23.034] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.034] Entry deleted from font path.
[ 23.045] (WW) The directory
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.045] Entry deleted from font path.
[ 23.045] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.045] Entry deleted from font path.
[ 23.045] (WW) The directory
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.045] Entry deleted from font path.
[ 23.046] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 23.046] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 23.046] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
[ 23.046] (WW) Disabling Mouse0
[ 23.046] (WW) Disabling Keyboard0
[ 23.046] (II) Loader magic: 0x7f61f1d62ae0
[ 23.046] (II) Module ABI versions:
[ 23.046] X.Org ANSI C Emulation: 0.4
[ 23.046] X.Org Video Driver: 12.1
[ 23.046] X.Org XInput driver : 16.0
[ 23.046] X.Org Server Extension : 6.0
[ 23.048] (--) PCI:*(0:0:1:0) 1002:9851:1179:f938 rev 5, Mem @
0xe0000000/268435456, 0xf2000000/8388608, 0xf2c00000/262144, I/O @
0x00003000/256, BIOS @ 0x????????/131072
[ 23.048] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.048] (II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
[ 23.048] (II) "dbe" will be loaded. This was enabled by default and also
specified in the config file.
[ 23.048] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 23.049] (II) "record" will be loaded. This was enabled by default and also
specified in the config file.
[ 23.049] (II) "dri" will be loaded. This was enabled by default and also
specified in the config file.
[ 23.049] (II) "dri2" will be loaded. This was enabled by default and also
specified in the config file.
[ 23.049] (II) LoadModule: "dri"
[ 23.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.152] (II) Module dri: vendor="X.Org Foundation"
[ 23.153] compiled for 1.12.4, module version = 1.0.0
[ 23.153] ABI class: X.Org Server Extension, version 6.0
[ 23.153] (II) Loading extension XFree86-DRI
[ 23.153] (II) LoadModule: "dri2"
[ 23.153] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.154] (II) Module dri2: vendor="X.Org Foundation"
[ 23.154] compiled for 1.12.4, module version = 1.2.0
[ 23.154] ABI class: X.Org Server Extension, version 6.0
[ 23.154] (II) Loading extension DRI2
[ 23.154] (II) LoadModule: "record"
[ 23.155] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.156] (II) Module record: vendor="X.Org Foundation"
[ 23.156] compiled for 1.12.4, module version = 1.13.0
[ 23.156] Module class: X.Org Server Extension
[ 23.156] ABI class: X.Org Server Extension, version 6.0
[ 23.156] (II) Loading extension RECORD
[ 23.156] (II) LoadModule: "glx"
[ 23.156] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 23.221] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 23.221] compiled for 6.9.0, module version = 1.0.0
[ 23.222] (II) Loading extension GLX
[ 23.222] (II) LoadModule: "dbe"
[ 23.222] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.243] (II) Module dbe: vendor="X.Org Foundation"
[ 23.243] compiled for 1.12.4, module version = 1.0.0
[ 23.243] Module class: X.Org Server Extension
[ 23.243] ABI class: X.Org Server Extension, version 6.0
[ 23.243] (II) Loading extension DOUBLE-BUFFER
[ 23.243] (II) LoadModule: "extmod"
[ 23.244] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.263] (II) Module extmod: vendor="X.Org Foundation"
[ 23.263] compiled for 1.12.4, module version = 1.0.0
[ 23.263] Module class: X.Org Server Extension
[ 23.263] ABI class: X.Org Server Extension, version 6.0
[ 23.263] (II) Loading extension SELinux
[ 23.263] (II) Loading extension MIT-SCREEN-SAVER
[ 23.263] (II) Loading extension XFree86-VidModeExtension
[ 23.263] (II) Loading extension XFree86-DGA
[ 23.263] (II) Loading extension DPMS
[ 23.263] (II) Loading extension XVideo
[ 23.263] (II) Loading extension XVideo-MotionCompensation
[ 23.263] (II) Loading extension X-Resource
[ 23.263] (II) LoadModule: "fbdev"
[ 23.264] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.275] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.275] compiled for 1.12.1, module version = 0.4.2
[ 23.275] ABI class: X.Org Video Driver, version 12.0
[ 23.276] (II) LoadModule: "vesa"
[ 23.276] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.291] (II) Module vesa: vendor="X.Org Foundation"
[ 23.291] compiled for 1.12.1, module version = 2.3.1
[ 23.291] Module class: X.Org Video Driver
[ 23.291] ABI class: X.Org Video Driver, version 12.0
[ 23.291] (II) FBDEV: driver for framebuffer: fbdev
[ 23.291] (II) VESA: driver for VESA chipsets: vesa
[ 23.291] (++) using VT number 7
[ 23.306] (II) Loading sub module "fbdevhw"
[ 23.306] (II) LoadModule: "fbdevhw"
[ 23.307] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.388] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.388] compiled for 1.12.4, module version = 0.0.2
[ 23.388] ABI class: X.Org Video Driver, version 12.1
[ 23.388] (**) FBDEV(0): claimed PCI slot 0@0:1:0
[ 23.388] (II) FBDEV(0): using default device
[ 23.388] (WW) Falling back to old probe method for vesa
[ 23.389] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 23.389] (==) FBDEV(0): RGB weight 888
[ 23.389] (==) FBDEV(0): Default visual is TrueColor
[ 23.389] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.389] (II) FBDEV(0): hardware: EFI VGA (video memory: 5632kB)
[ 23.389] (II) FBDEV(0): checking modes against framebuffer device...
[ 23.389] (II) FBDEV(0): checking modes against monitor...
[ 23.389] (--) FBDEV(0): Virtual size is 1600x900 (pitch 1600)
[ 23.389] (**) FBDEV(0): Built-in mode "current": 144.0 MHz, 70.9 kHz, 76.7
Hz
[ 23.389] (II) FBDEV(0): Modeline "current"x0.0 144.01 1600 1632 1832 2032
900 904 908 924 -hsync -vsync -csync (70.9 kHz b)
[ 23.389] (==) FBDEV(0): DPI set to (96, 96)
[ 23.389] (II) Loading sub module "fb"
[ 23.389] (II) LoadModule: "fb"
[ 23.390] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.404] (II) Module fb: vendor="X.Org Foundation"
[ 23.404] compiled for 1.12.4, module version = 1.0.0
[ 23.405] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.405] (**) FBDEV(0): using shadow framebuffer
[ 23.405] (II) Loading sub module "shadow"
[ 23.405] (II) LoadModule: "shadow"
[ 23.405] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 23.421] (II) Module shadow: vendor="X.Org Foundation"
[ 23.421] compiled for 1.12.4, module version = 1.1.0
[ 23.421] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.421] (II) UnloadModule: "vesa"
[ 23.421] (II) Unloading vesa
[ 23.421] (==) Depth 24 pixmap format is 32 bpp
[ 23.424] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 23.449] (==) FBDEV(0): Backing store disabled
[ 23.450] (==) FBDEV(0): DPMS enabled
[ 23.451] (==) RandR enabled
[ 23.451] (II) Initializing built-in extension Generic Event Extension
[ 23.451] (II) Initializing built-in extension SHAPE
[ 23.451] (II) Initializing built-in extension MIT-SHM
[ 23.451] (II) Initializing built-in extension XInputExtension
[ 23.451] (II) Initializing built-in extension XTEST
[ 23.451] (II) Initializing built-in extension BIG-REQUESTS
[ 23.451] (II) Initializing built-in extension SYNC
[ 23.451] (II) Initializing built-in extension XKEYBOARD
[ 23.451] (II) Initializing built-in extension XC-MISC
[ 23.451] (II) Initializing built-in extension SECURITY
[ 23.451] (II) Initializing built-in extension XINERAMA
[ 23.451] (II) Initializing built-in extension XFIXES
[ 23.451] (II) Initializing built-in extension RENDER
[ 23.451] (II) Initializing built-in extension RANDR
[ 23.451] (II) Initializing built-in extension COMPOSITE
[ 23.451] (II) Initializing built-in extension DAMAGE
[ 23.453] (II) SELinux: Disabled on system
[ 23.466] (EE) GLX error: Can not get required symbols.
[ 24.128] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 24.128] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.128] (II) LoadModule: "evdev"
[ 24.129] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.147] (II) Module evdev: vendor="X.Org Foundation"
[ 24.147] compiled for 1.12.1, module version = 2.7.0
[ 24.147] Module class: X.Org XInput Driver
[ 24.147] ABI class: X.Org XInput driver, version 16.0
[ 24.147] (II) Using input driver 'evdev' for 'Power Button'
[ 24.148] (**) Power Button: always reports core events
[ 24.148] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 24.148] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.148] (--) evdev: Power Button: Found keys
[ 24.148] (II) evdev: Power Button: Configuring as keyboard
[ 24.148] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 24.148] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 24.148] (**) Option "xkb_rules" "evdev"
[ 24.148] (**) Option "xkb_model" "pc105"
[ 24.148] (**) Option "xkb_layout" "fr"
[ 24.148] (**) Option "xkb_variant" "latin9"
[ 24.320] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 24.320] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.320] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.321] (**) Video Bus: always reports core events
[ 24.321] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 24.321] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.321] (--) evdev: Video Bus: Found keys
[ 24.321] (II) evdev: Video Bus: Configuring as keyboard
[ 24.321] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 24.321] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[ 24.321] (**) Option "xkb_rules" "evdev"
[ 24.321] (**) Option "xkb_model" "pc105"
[ 24.321] (**) Option "xkb_layout" "fr"
[ 24.321] (**) Option "xkb_variant" "latin9"
[ 24.323] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 24.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.323] (II) Using input driver 'evdev' for 'Power Button'
[ 24.323] (**) Power Button: always reports core events
[ 24.323] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 24.323] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.323] (--) evdev: Power Button: Found keys
[ 24.323] (II) evdev: Power Button: Configuring as keyboard
[ 24.323] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 24.323] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[ 24.323] (**) Option "xkb_rules" "evdev"
[ 24.323] (**) Option "xkb_model" "pc105"
[ 24.323] (**) Option "xkb_layout" "fr"
[ 24.323] (**) Option "xkb_variant" "latin9"
[ 24.325] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[ 24.325] (II) No input driver specified, ignoring this device.
[ 24.325] (II) This device may have been added with another device file.
[ 24.326] (II) config/udev: Adding input device HD-Audio Generic
HDMI/DP,pcm=3 (/dev/input/event8)
[ 24.326] (II) No input driver specified, ignoring this device.
[ 24.326] (II) This device may have been added with another device file.
[ 24.327] (II) config/udev: Adding input device TOSHIBA Web Camera - HD
(/dev/input/event12)
[ 24.327] (**) TOSHIBA Web Camera - HD: Applying InputClass "evdev keyboard
catchall"
[ 24.327] (II) Using input driver 'evdev' for 'TOSHIBA Web Camera - HD'
[ 24.327] (**) TOSHIBA Web Camera - HD: always reports core events
[ 24.327] (**) evdev: TOSHIBA Web Camera - HD: Device: "/dev/input/event12"
[ 24.327] (--) evdev: TOSHIBA Web Camera - HD: Vendor 0x10f1 Product 0x1a5b
[ 24.327] (--) evdev: TOSHIBA Web Camera - HD: Found keys
[ 24.327] (II) evdev: TOSHIBA Web Camera - HD: Configuring as keyboard
[ 24.327] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event12"
[ 24.327] (II) XINPUT: Adding extended input device "TOSHIBA Web Camera -
HD" (type: KEYBOARD, id 9)
[ 24.328] (**) Option "xkb_rules" "evdev"
[ 24.328] (**) Option "xkb_model" "pc105"
[ 24.328] (**) Option "xkb_layout" "fr"
[ 24.328] (**) Option "xkb_variant" "latin9"
[ 24.329] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event9)
[ 24.329] (II) No input driver specified, ignoring this device.
[ 24.329] (II) This device may have been added with another device file.
[ 24.330] (II) config/udev: Adding input device HD-Audio Generic Mic
(/dev/input/event10)
[ 24.330] (II) No input driver specified, ignoring this device.
[ 24.330] (II) This device may have been added with another device file.
[ 24.331] (II) config/udev: Adding input device HD-Audio Generic Headphone
(/dev/input/event11)
[ 24.331] (II) No input driver specified, ignoring this device.
[ 24.331] (II) This device may have been added with another device file.
[ 24.332] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 24.332] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 24.332] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.332] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.332] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 24.332] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.332] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.332] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.332] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 24.332] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 10)
[ 24.332] (**) Option "xkb_rules" "evdev"
[ 24.332] (**) Option "xkb_model" "pc105"
[ 24.332] (**) Option "xkb_layout" "fr"
[ 24.333] (**) Option "xkb_variant" "latin9"
[ 24.334] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event7)
[ 24.334] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 24.334] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 24.334] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default
clickpad buttons"
[ 24.334] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[ 24.334] (II) LoadModule: "synaptics"
[ 24.335] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.428] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.428] compiled for 1.12.4, module version = 1.6.2
[ 24.428] Module class: X.Org XInput Driver
[ 24.428] ABI class: X.Org XInput driver, version 16.0
[ 24.428] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 24.428] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.428] (**) Option "Device" "/dev/input/event7"
[ 24.536] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events
for semi-multitouch device
[ 24.537] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 -
5634
[ 24.537] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 -
4598
[ 24.537] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.537] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 -
15
[ 24.537] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
double triple
[ 24.537] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 24.537] (**) Option "VertEdgeScroll" "1"
[ 24.537] (**) Option "CornerCoasting" "1"
[ 24.537] (**) Option "VertTwoFingerScroll" "1"
[ 24.537] (**) Option "HorizTwoFingerScroll" "1"
[ 24.537] (**) Option "EdgeMotionUseAlways" "1"
[ 24.537] (**) Option "RBCornerButton" "9"
[ 24.537] (**) Option "LBCornerButton" "8"
[ 24.537] (**) Option "TapButton1" "1"
[ 24.537] (**) Option "TapButton2" "2"
[ 24.537] (**) Option "TapButton3" "3"
[ 24.537] (**) Option "CircularScrolling" "1"
[ 24.537] (**) Option "CircScrollTrigger" "7"
[ 24.538] (**) Option "MinSpeed" "0.5"
[ 24.538] (**) Option "MaxSpeed" "1.0"
[ 24.538] (**) Option "AccelFactor" "0.075"
[ 24.538] (**) Option "CoastingSpeed" "8"
[ 24.538] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.538] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.538] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 24.538] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD, id 11)
[ 24.538] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is
now constant deceleration 2.0
[ 24.539] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 2.00
[ 24.539] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now
0.075
[ 24.539] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[ 24.539] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 24.539] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.539] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.539] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.540] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 24.540] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 24.541] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 24.541] (II) No input driver specified, ignoring this device.
[ 24.541] (II) This device may have been added with another device file.
[ 24.543] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event13)
[ 24.543] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev
keyboard catchall"
[ 24.543] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 24.543] (**) ACPI Virtual Keyboard Device: always reports core events
[ 24.543] (**) evdev: ACPI Virtual Keyboard Device: Device:
"/dev/input/event13"
[ 24.543] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 24.543] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 24.543] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 24.543] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input13/event13"
[ 24.543] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard
Device" (type: KEYBOARD, id 12)
[ 24.543] (**) Option "xkb_rules" "evdev"
[ 24.543] (**) Option "xkb_model" "pc105"
[ 24.543] (**) Option "xkb_layout" "fr"
[ 24.544] (**) Option "xkb_variant" "latin9"
[ 24.545] (II) config/udev: Adding input device Toshiba input device
(/dev/input/event6)
[ 24.545] (**) Toshiba input device: Applying InputClass "evdev keyboard
catchall"
[ 24.545] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 24.545] (**) Toshiba input device: always reports core events
[ 24.545] (**) evdev: Toshiba input device: Device: "/dev/input/event6"
[ 24.545] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 24.545] (--) evdev: Toshiba input device: Found keys
[ 24.545] (II) evdev: Toshiba input device: Configuring as keyboard
[ 24.545] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input6/event6"
[ 24.546] (II) XINPUT: Adding extended input device "Toshiba input device"
(type: KEYBOARD, id 13)
[ 24.546] (**) Option "xkb_rules" "evdev"
[ 24.546] (**) Option "xkb_model" "pc105"
[ 24.546] (**) Option "xkb_layout" "fr"
[ 24.546] (**) Option "xkb_variant" "latin9"
[ 24.558] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=1ba23965-7652-4f10-a52f-41bb82fd7619 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000006e000 (usable)
[ 0.000000] BIOS-e820: 000000000006e000 - 0000000000070000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000000070000 - 0000000000086000 (usable)
[ 0.000000] BIOS-e820: 0000000000086000 - 00000000000c0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000097c34000 (usable)
[ 0.000000] BIOS-e820: 0000000097c34000 - 000000009853c000 (reserved)
[ 0.000000] BIOS-e820: 000000009853c000 - 000000009f28f000 (usable)
[ 0.000000] BIOS-e820: 000000009f28f000 - 000000009f48f000 type 20
[ 0.000000] BIOS-e820: 000000009f48f000 - 000000009fa8f000 (reserved)
[ 0.000000] BIOS-e820: 000000009fa8f000 - 000000009fb8f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009fb8f000 - 000000009fbff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009fbff000 - 000000009fc00000 (usable)
[ 0.000000] BIOS-e820: 000000009fc00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f2800000 - 00000000f2900000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000021f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] EFI v2.31 by INSYDE Corp.
[ 0.000000] ACPI=0x9fbfe000 ACPI 2.0=0x9fbfe014 SMBIOS=0x9fa8ef98
[ 0.000000] Kernel-defined memdesc doesn't match the one from EFI!
[ 0.000000] EFI: mem00: type=3, attr=0xf,
range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] EFI: mem01: type=7, attr=0xf,
range=[0x0000000000001000-0x000000000006e000) (0MB)
[ 0.000000] EFI: mem02: type=10, attr=0xf,
range=[0x000000000006e000-0x0000000000070000) (0MB)
[ 0.000000] EFI: mem03: type=7, attr=0xf,
range=[0x0000000000070000-0x0000000000086000) (0MB)
[ 0.000000] EFI: mem04: type=0, attr=0xf,
range=[0x0000000000086000-0x0000000000088000) (0MB)
[ 0.000000] EFI: mem05: type=6, attr=0x800000000000000f,
range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] EFI: mem06: type=2, attr=0xf,
range=[0x0000000000100000-0x0000000000c54000) (11MB)
[ 0.000000] EFI: mem07: type=7, attr=0xf,
range=[0x0000000000c54000-0x0000000036a6a000) (862MB)
[ 0.000000] EFI: mem08: type=2, attr=0xf,
range=[0x0000000036a6a000-0x000000003752d000) (10MB)
[ 0.000000] EFI: mem09: type=7, attr=0xf,
range=[0x000000003752d000-0x000000006eddf000) (888MB)
[ 0.000000] EFI: mem10: type=2, attr=0xf,
range=[0x000000006eddf000-0x0000000095540000) (615MB)
[ 0.000000] EFI: mem11: type=4, attr=0xf,
range=[0x0000000095540000-0x0000000095560000) (0MB)
[ 0.000000] EFI: mem12: type=7, attr=0xf,
range=[0x0000000095560000-0x00000000967a8000) (18MB)
[ 0.000000] EFI: mem13: type=2, attr=0xf,
range=[0x00000000967a8000-0x0000000096895000) (0MB)
[ 0.000000] EFI: mem14: type=7, attr=0xf,
range=[0x0000000096895000-0x0000000096896000) (0MB)
[ 0.000000] EFI: mem15: type=2, attr=0xf,
range=[0x0000000096896000-0x0000000096897000) (0MB)
[ 0.000000] EFI: mem16: type=7, attr=0xf,
range=[0x0000000096897000-0x0000000096898000) (0MB)
[ 0.000000] EFI: mem17: type=2, attr=0xf,
range=[0x0000000096898000-0x000000009689d000) (0MB)
[ 0.000000] EFI: mem18: type=7, attr=0xf,
range=[0x000000009689d000-0x00000000968a1000) (0MB)
[ 0.000000] EFI: mem19: type=2, attr=0xf,
range=[0x00000000968a1000-0x00000000968a3000) (0MB)
[ 0.000000] EFI: mem20: type=7, attr=0xf,
range=[0x00000000968a3000-0x00000000968a5000) (0MB)
[ 0.000000] EFI: mem21: type=2, attr=0xf,
range=[0x00000000968a5000-0x00000000968a6000) (0MB)
[ 0.000000] EFI: mem22: type=7, attr=0xf,
range=[0x00000000968a6000-0x00000000968a7000) (0MB)
[ 0.000000] EFI: mem23: type=2, attr=0xf,
range=[0x00000000968a7000-0x00000000968a8000) (0MB)
[ 0.000000] EFI: mem24: type=7, attr=0xf,
range=[0x00000000968a8000-0x00000000968a9000) (0MB)
[ 0.000000] EFI: mem25: type=2, attr=0xf,
range=[0x00000000968a9000-0x00000000968aa000) (0MB)
[ 0.000000] EFI: mem26: type=7, attr=0xf,
range=[0x00000000968aa000-0x00000000968ac000) (0MB)
[ 0.000000] EFI: mem27: type=2, attr=0xf,
range=[0x00000000968ac000-0x0000000096996000) (0MB)
[ 0.000000] EFI: mem28: type=4, attr=0xf,
range=[0x0000000096996000-0x0000000097c34000) (18MB)
[ 0.000000] EFI: mem29: type=0, attr=0xf,
range=[0x0000000097c34000-0x000000009853c000) (9MB)
[ 0.000000] EFI: mem30: type=2, attr=0xf,
range=[0x000000009853c000-0x000000009853f000) (0MB)
[ 0.000000] EFI: mem31: type=7, attr=0xf,
range=[0x000000009853f000-0x000000009861c000) (0MB)
[ 0.000000] EFI: mem32: type=1, attr=0xf,
range=[0x000000009861c000-0x000000009873f000) (1MB)
[ 0.000000] EFI: mem33: type=7, attr=0xf,
range=[0x000000009873f000-0x000000009bb84000) (52MB)
[ 0.000000] EFI: mem34: type=4, attr=0xf,
range=[0x000000009bb84000-0x000000009bb9b000) (0MB)
[ 0.000000] EFI: mem35: type=7, attr=0xf,
range=[0x000000009bb9b000-0x000000009bbb9000) (0MB)
[ 0.000000] EFI: mem36: type=4, attr=0xf,
range=[0x000000009bbb9000-0x000000009bbd7000) (0MB)
[ 0.000000] EFI: mem37: type=7, attr=0xf,
range=[0x000000009bbd7000-0x000000009bbd8000) (0MB)
[ 0.000000] EFI: mem38: type=4, attr=0xf,
range=[0x000000009bbd8000-0x000000009ca0e000) (14MB)
[ 0.000000] EFI: mem39: type=7, attr=0xf,
range=[0x000000009ca0e000-0x000000009ca11000) (0MB)
[ 0.000000] EFI: mem40: type=4, attr=0xf,
range=[0x000000009ca11000-0x000000009ca19000) (0MB)
[ 0.000000] EFI: mem41: type=7, attr=0xf,
range=[0x000000009ca19000-0x000000009ca1c000) (0MB)
[ 0.000000] EFI: mem42: type=4, attr=0xf,
range=[0x000000009ca1c000-0x000000009ec8f000) (34MB)
[ 0.000000] EFI: mem43: type=7, attr=0xf,
range=[0x000000009ec8f000-0x000000009ee36000) (1MB)
[ 0.000000] EFI: mem44: type=2, attr=0xf,
range=[0x000000009ee36000-0x000000009ee40000) (0MB)
[ 0.000000] EFI: mem45: type=3, attr=0xf,
range=[0x000000009ee40000-0x000000009f28f000) (4MB)
[ 0.000000] EFI: mem46: type=5, attr=0x800000000000000f,
range=[0x000000009f28f000-0x000000009f48f000) (2MB)
[ 0.000000] EFI: mem47: type=6, attr=0x800000000000000f,
range=[0x000000009f48f000-0x000000009f68f000) (2MB)
[ 0.000000] EFI: mem48: type=0, attr=0xf,
range=[0x000000009f68f000-0x000000009fa8f000) (4MB)
[ 0.000000] EFI: mem49: type=10, attr=0xf,
range=[0x000000009fa8f000-0x000000009fb8f000) (1MB)
[ 0.000000] EFI: mem50: type=9, attr=0xf,
range=[0x000000009fb8f000-0x000000009fbff000) (0MB)
[ 0.000000] EFI: mem51: type=4, attr=0xf,
range=[0x000000009fbff000-0x000000009fc00000) (0MB)
[ 0.000000] EFI: mem52: type=7, attr=0xf,
range=[0x0000000100000000-0x000000021f000000) (4592MB)
[ 0.000000] EFI: mem53: type=0, attr=0x0,
range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] EFI: mem54: type=0, attr=0x0,
range=[0x000000009fc00000-0x00000000e0000000) (1028MB)
[ 0.000000] EFI: mem55: type=11, attr=0x8000000000000000,
range=[0x00000000f2800000-0x00000000f2900000) (1MB)
[ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001,
range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001,
range=[0x00000000fec00000-0x00000000fec02000) (0MB)
[ 0.000000] EFI: mem58: type=11, attr=0x8000000000000001,
range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] EFI: mem59: type=11, attr=0x8000000000000001,
range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] EFI: mem60: type=11, attr=0x8000000000000001,
range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] EFI: mem61: type=11, attr=0x8000000000000000,
range=[0x00000000ff800000-0x0000000100000000) (8MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: TOSHIBA SATELLITE C70D-B/Portable PC, BIOS 1.30 08/14/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 009FB78000 mask FFFFFFF000 uncachable
[ 0.000000] 3 base 00FF800000 mask FFFF800000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000007d000] 7d000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000009fc00000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 009fc00000 page 2M
[ 0.000000] kernel direct mapping tables up to 9fc00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000021f000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 021f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 21f000000 @ 9ee3e000-9ee40000
[ 0.000000] RAMDISK: 36a6a000 - 3752d000
[ 0.000000] ACPI: RSDP 000000009fbfe014 00024 (v02 TOSINV)
[ 0.000000] ACPI: XSDT 000000009fbc7188 000D4 (v01 TOSINV TOSINV00 00000001
01000013)
[ 0.000000] ACPI: FACP 000000009fbfc000 0010C (v05 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version,
truncating length 268 to 244 (20110623/tbfadt-288)
[ 0.000000] ACPI: DSDT 000000009fbf2000 05F3F (v01 TOSINV TOSINV00 F0000000
ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009fb2f000 00040
[ 0.000000] ACPI: UEFI 000000009fbfd000 00236 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009fbfb000 00038 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009fbfa000 00090 (v03 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009fbf9000 0003C (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: ASF! 000000009fbf8000 000A5 (v32 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009fbf1000 00028 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SLIC 000000009fbf0000 00176 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: FPDT 000000009fbee000 00044 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: MSDM 000000009fbed000 00055 (v03 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbe6000 06D71 (v01 TOSINV TsbOdm 00001000
INTL 20120215)
[ 0.000000] ACPI: SSDT 000000009fbe5000 00CB0 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbe0000 0487A (v02 TOSINV TOSINV00 00000002
ACPI 00040000)
[ 0.000000] ACPI: VFCT 000000009fbd1000 0EC84 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbd0000 0085A (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbcf000 00418 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbcd000 01309 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbcc000 0008C (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbca000 01138 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009fbc8000 00FB4 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: WPBT 000000009fbbe000 00038 (v01 TOSINV TOSINV00 00000001
ABTW 20120402)
[ 0.000000] ACPI: BGRT 000000009fbc9000 00038 (v01 TOSINV TOSINV00 00000001
ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000021f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000021f000000
[ 0.000000] NODE_DATA [000000021effb000 - 000000021effffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD ->
[ffff880217600000-ffff88021d9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0021f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000006e
[ 0.000000] 0: 0x00000070 -> 0x00000086
[ 0.000000] 0: 0x00000100 -> 0x00097c34
[ 0.000000] 0: 0x0009853c -> 0x0009f28f
[ 0.000000] 0: 0x0009fbff -> 0x0009fc00
[ 0.000000] 0: 0x00100000 -> 0x0021f000
[ 0.000000] On node 0 totalpages: 1825020
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3894 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 631232 pages, LIFO batch:31
[ 0.000000] Normal zone: 16072 pages used for memmap
[ 0.000000] Normal zone: 1159480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 000000000006e000 - 0000000000070000
[ 0.000000] PM: Registered nosave memory: 0000000000086000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000097c34000 - 000000009853c000
[ 0.000000] PM: Registered nosave memory: 000000009f28f000 - 000000009f48f000
[ 0.000000] PM: Registered nosave memory: 000000009f48f000 - 000000009fa8f000
[ 0.000000] PM: Registered nosave memory: 000000009fa8f000 - 000000009fb8f000
[ 0.000000] PM: Registered nosave memory: 000000009fb8f000 - 000000009fbff000
[ 0.000000] PM: Registered nosave memory: 000000009fc00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f2800000
[ 0.000000] PM: Registered nosave memory: 00000000f2800000 - 00000000f2900000
[ 0.000000] PM: Registered nosave memory: 00000000f2900000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000
[ 0.000000] PM: Registered nosave memory: 00000000fec02000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:12800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021ec00000 s78848 r8192
d23552 u524288
[ 0.000000] pcpu-alloc: s78848 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1794606
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=1ba23965-7652-4f10-a52f-41bb82fd7619 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7037964k/8896512k available (3433k kernel code, 1596432k
absent, 262116k reserved, 3305k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1996.330 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3992.66 BogoMIPS (lpj=7985320)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.028136] Security Framework initialized
[ 0.028153] AppArmor: AppArmor disabled by boot time parameter
[ 0.028878] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.034915] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.037481] Mount-cache hash table entries: 256
[ 0.037692] Initializing cgroup subsys cpuacct
[ 0.037699] Initializing cgroup subsys memory
[ 0.037719] Initializing cgroup subsys devices
[ 0.037722] Initializing cgroup subsys freezer
[ 0.037726] Initializing cgroup subsys net_cls
[ 0.037729] Initializing cgroup subsys blkio
[ 0.037740] Initializing cgroup subsys perf_event
[ 0.037792] tseg: 009fc00000
[ 0.037795] CPU: Physical Processor ID: 0
[ 0.037796] CPU: Processor Core ID: 0
[ 0.046663] mce: CPU supports 6 MCE banks
[ 0.047304] ACPI: Core revision 20110623
[ 0.060691] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.101841] CPU0: AMD A8-6410 APU with AMD Radeon R5 Graphics stepping 01
[ 0.104005] Performance Events: AMD PMU driver.
[ 0.104005] ... version: 0
[ 0.104005] ... bit width: 48
[ 0.104005] ... generic registers: 4
[ 0.104005] ... value mask: 0000ffffffffffff
[ 0.104005] ... max period: 00007fffffffffff
[ 0.104005] ... fixed-purpose events: 0
[ 0.104005] ... event mask: 000000000000000f
[ 0.104005] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.104005] Booting Node 0, Processors #1
[ 0.104005] smpboot cpu 1: start_ip = 7d000
[ 0.200082] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.200353] #2
[ 0.200356] smpboot cpu 2: start_ip = 7d000
[ 0.304088] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.304343] #3 Ok.
[ 0.304345] smpboot cpu 3: start_ip = 7d000
[ 0.408099] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.408188] Brought up 4 CPUs
[ 0.408191] Total of 4 processors activated (15969.22 BogoMIPS).
[ 0.409484] devtmpfs: initialized
[ 0.414387] PM: Registering ACPI NVS region at 6e000 (8192 bytes)
[ 0.414387] PM: Registering ACPI NVS region at 9fa8f000 (1048576 bytes)
[ 0.414387] print_constraints: dummy:
[ 0.414387] NET: Registered protocol family 16
[ 0.414387] Extended Config Space enabled on 0 nodes
[ 0.414387] ACPI: bus type pci registered
[ 0.414387] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.414387] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.420861] PCI: Using configuration type 1 for base access
[ 0.421954] bio: create slab <bio-0> at 0
[ 0.421954] ACPI: Added _OSI(Module Device)
[ 0.421954] ACPI: Added _OSI(Processor Device)
[ 0.421954] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.421954] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.424598] ACPI: EC: Look up EC in DSDT
[ 0.426918] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.452353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.618302] ACPI: Interpreter enabled
[ 0.618310] ACPI: (supports S0 S3 S4 S5)
[ 0.618341] ACPI: Using IOAPIC for interrupt routing
[ 0.767058] ACPI: Power Resource [PFA1] (off)
[ 0.816214] ACPI: No dock devices found.
[ 0.816214] HEST: Table not found.
[ 0.816214] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.848217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.888213] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.888218] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.888221] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.888224] pci_root PNP0A08:00: host bridge window [mem
0x000c0000-0x000c3fff]
[ 0.888226] pci_root PNP0A08:00: host bridge window [mem
0x000c4000-0x000c7fff]
[ 0.888229] pci_root PNP0A08:00: host bridge window [mem
0x000c8000-0x000cbfff]
[ 0.888232] pci_root PNP0A08:00: host bridge window [mem
0x000cc000-0x000cffff]
[ 0.888235] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d3fff]
[ 0.888237] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 0.888244] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 0.888247] pci_root PNP0A08:00: host bridge window [mem
0x000dc000-0x000dffff]
[ 0.888249] pci_root PNP0A08:00: host bridge window [mem
0x000e0000-0x000e3fff]
[ 0.888252] pci_root PNP0A08:00: host bridge window [mem
0x000e4000-0x000e7fff]
[ 0.888254] pci_root PNP0A08:00: host bridge window [mem
0x000e8000-0x000ebfff]
[ 0.888257] pci_root PNP0A08:00: host bridge window [mem
0x000ec000-0x000effff]
[ 0.888260] pci_root PNP0A08:00: host bridge window [mem
0xe0000000-0xf7ffffff]
[ 0.888262] pci_root PNP0A08:00: host bridge window [mem
0xfc000000-0xfed3ffff]
[ 0.888265] pci_root PNP0A08:00: host bridge window [mem
0xfed45000-0xffffffff]
[ 0.888287] pci 0000:00:00.0: [1022:1566] type 0 class 0x000600
[ 0.888337] pci 0000:00:01.0: [1002:9851] type 0 class 0x000300
[ 0.888349] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.888359] pci 0000:00:01.0: reg 18: [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.888365] pci 0000:00:01.0: reg 20: [io 0x3000-0x30ff]
[ 0.888372] pci 0000:00:01.0: reg 24: [mem 0xf2c00000-0xf2c3ffff]
[ 0.888379] pci 0000:00:01.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.888410] pci 0000:00:01.0: supports D1 D2
[ 0.888413] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.888437] pci 0000:00:01.1: [1002:9840] type 0 class 0x000403
[ 0.888449] pci 0000:00:01.1: reg 10: [mem 0xf2c60000-0xf2c63fff 64bit]
[ 0.888499] pci 0000:00:01.1: supports D1 D2
[ 0.888519] pci 0000:00:02.0: [1022:156b] type 0 class 0x000600
[ 0.888553] pci 0000:00:02.2: [1022:1439] type 1 class 0x000604
[ 0.888553] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.888553] pci 0000:00:02.3: [1022:1439] type 1 class 0x000604
[ 0.888553] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.888553] pci 0000:00:02.4: [1022:1439] type 1 class 0x000604
[ 0.888553] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.888553] pci 0000:00:08.0: [1022:1537] type 0 class 0x001080
[ 0.888553] pci 0000:00:08.0: reg 10: [mem 0xf2c40000-0xf2c5ffff 64bit pref]
[ 0.888553] pci 0000:00:08.0: reg 18: [mem 0xf2900000-0xf29fffff]
[ 0.888553] pci 0000:00:08.0: reg 1c: [mem 0xf2c6f000-0xf2c6ffff]
[ 0.888553] pci 0000:00:08.0: reg 24: [mem 0xf2c6a000-0xf2c6bfff]
[ 0.888553] pci 0000:00:10.0: [1022:7814] type 0 class 0x000c03
[ 0.888553] pci 0000:00:10.0: reg 10: [mem 0xf2c68000-0xf2c69fff 64bit]
[ 0.888553] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.888553] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[ 0.888553] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f]
[ 0.888553] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127]
[ 0.888553] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117]
[ 0.888553] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123]
[ 0.888561] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f]
[ 0.888569] pci 0000:00:11.0: reg 24: [mem 0xf2c6e000-0xf2c6e3ff]
[ 0.888610] pci 0000:00:11.0: PME# supported from D3hot
[ 0.888636] pci 0000:00:12.0: [1022:7808] type 0 class 0x000c03
[ 0.888651] pci 0000:00:12.0: reg 10: [mem 0xf2c6d000-0xf2c6d0ff]
[ 0.888713] pci 0000:00:12.0: supports D1 D2
[ 0.888715] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.888736] pci 0000:00:13.0: [1022:7808] type 0 class 0x000c03
[ 0.888752] pci 0000:00:13.0: reg 10: [mem 0xf2c6c000-0xf2c6c0ff]
[ 0.888813] pci 0000:00:13.0: supports D1 D2
[ 0.888816] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.888832] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 0.888895] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 0.888913] pci 0000:00:14.2: reg 10: [mem 0xf2c64000-0xf2c67fff 64bit]
[ 0.888971] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.888988] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 0.889056] pci 0000:00:18.0: [1022:1580] type 0 class 0x000600
[ 0.889079] pci 0000:00:18.1: [1022:1581] type 0 class 0x000600
[ 0.889100] pci 0000:00:18.2: [1022:1582] type 0 class 0x000600
[ 0.889122] pci 0000:00:18.3: [1022:1583] type 0 class 0x000600
[ 0.889148] pci 0000:00:18.4: [1022:1584] type 0 class 0x000600
[ 0.889169] pci 0000:00:18.5: [1022:1585] type 0 class 0x000600
[ 0.889247] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[ 0.889263] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.889287] pci 0000:01:00.0: reg 18: [mem 0xf1000000-0xf1000fff 64bit]
[ 0.889303] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.889368] pci 0000:01:00.0: supports D1 D2
[ 0.889370] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.896097] pci 0000:00:02.2: PCI bridge to [bus 01-04]
[ 0.896106] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
[ 0.896110] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff]
[ 0.896116] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf0ffffff
64bit pref]
[ 0.896211] pci 0000:05:00.0: [14e4:4365] type 0 class 0x000280
[ 0.896236] pci 0000:05:00.0: reg 10: [mem 0xf2b00000-0xf2b07fff 64bit]
[ 0.896347] pci 0000:05:00.0: supports D1 D2
[ 0.896350] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.904144] pci 0000:00:02.3: PCI bridge to [bus 05-05]
[ 0.904161] pci 0000:00:02.3: bridge window [mem 0xf2b00000-0xf2bfffff]
[ 0.904236] pci 0000:06:00.0: [10ec:5229] type 0 class 0x00ff00
[ 0.904255] pci 0000:06:00.0: reg 10: [mem 0xf2a00000-0xf2a00fff]
[ 0.904367] pci 0000:06:00.0: supports D1 D2
[ 0.904370] pci 0000:06:00.0: PME# supported from D1 D2 D3hot
[ 0.912100] pci 0000:00:02.4: PCI bridge to [bus 06-06]
[ 0.912111] pci 0000:00:02.4: bridge window [mem 0xf2a00000-0xf2afffff]
[ 0.916155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.916254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP0._PRT]
[ 0.916322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP1._PRT]
[ 0.916396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP2._PRT]
[ 0.916523] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.916528] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 0.916531] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.923527] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.923620] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.923727] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.923833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.923921] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.923988] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.924069] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.924138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.924275] vgaarb: device added:
PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.924275] vgaarb: loaded
[ 0.924275] vgaarb: bridge control possible 0000:00:01.0
[ 0.924275] PCI: Using ACPI for IRQ routing
[ 0.925648] PCI: pci_cache_line_size set to 64 bytes
[ 0.925760] reserve RAM buffer: 000000000006e000 - 000000000006ffff
[ 0.925763] reserve RAM buffer: 0000000000086000 - 000000000008ffff
[ 0.925766] reserve RAM buffer: 0000000097c34000 - 0000000097ffffff
[ 0.925769] reserve RAM buffer: 000000009f28f000 - 000000009fffffff
[ 0.925772] reserve RAM buffer: 000000009fc00000 - 000000009fffffff
[ 0.925774] reserve RAM buffer: 000000021f000000 - 000000021fffffff
[ 0.925933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.925938] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.928080] Switching to clocksource hpet
[ 0.930435] pnp: PnP ACPI init
[ 0.930458] ACPI: bus type pnp registered
[ 0.930644] pnp 00:00: [bus 00-ff]
[ 0.930648] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.930651] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.930654] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.930657] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.930660] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.930663] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.930665] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.930668] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.930671] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.930673] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.930676] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.930679] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.930681] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.930684] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.930687] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.930689] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.930692] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[ 0.930695] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[ 0.930698] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.930778] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.930866] pnp 00:01: [mem 0xfec00000-0xfec01fff]
[ 0.930869] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.930937] system 00:01: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.930941] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.930946] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.931068] pnp 00:02: [irq 0 disabled]
[ 0.931082] pnp 00:02: [irq 8]
[ 0.931085] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.931123] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.931199] pnp 00:03: [io 0x0000-0x000f]
[ 0.931202] pnp 00:03: [io 0x0081-0x008f]
[ 0.931204] pnp 00:03: [io 0x00c0-0x00df]
[ 0.931207] pnp 00:03: [dma 4]
[ 0.931257] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.931272] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.931279] pnp 00:04: [irq 13]
[ 0.931320] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.931360] pnp 00:05: [io 0x0070-0x0071]
[ 0.931405] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.931418] pnp 00:06: [io 0x0061]
[ 0.931461] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.931477] pnp 00:07: [io 0x0060]
[ 0.931480] pnp 00:07: [io 0x0064]
[ 0.931486] pnp 00:07: [irq 1]
[ 0.931529] pnp 00:07: Plug and Play ACPI device, IDs TOS1101 PNP0303
(active)
[ 0.931547] pnp 00:08: [irq 12]
[ 0.931593] pnp 00:08: Plug and Play ACPI device, IDs TOS0330 SYN1900
SYN0002 PNP0f13 (active)
[ 0.931607] pnp 00:09: [io 0x0b20-0x0b3f]
[ 0.931610] pnp 00:09: IRQ 7 override to edge, high
[ 0.931616] pnp 00:09: [irq 7]
[ 0.931660] pnp 00:09: Plug and Play ACPI device, IDs SMB0001 (active)
[ 0.931677] pnp 00:0a: [io 0x0010-0x001f]
[ 0.931680] pnp 00:0a: [io 0x002e-0x002f]
[ 0.931682] pnp 00:0a: [io 0x0062]
[ 0.931684] pnp 00:0a: [io 0x0066]
[ 0.931686] pnp 00:0a: [io 0x0068]
[ 0.931689] pnp 00:0a: [io 0x006c]
[ 0.931691] pnp 00:0a: [io 0x0072-0x0073]
[ 0.931693] pnp 00:0a: [io 0x0080]
[ 0.931695] pnp 00:0a: [io 0x00b0-0x00b1]
[ 0.931698] pnp 00:0a: [io 0x0092]
[ 0.931700] pnp 00:0a: [io 0x0400-0x04cf]
[ 0.931702] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.931704] pnp 00:0a: [io 0x04d6]
[ 0.931707] pnp 00:0a: [io 0x0680-0x06ff]
[ 0.931709] pnp 00:0a: [io 0x077a]
[ 0.931711] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.931715] pnp 00:0a: [io 0x0c14]
[ 0.931717] pnp 00:0a: [io 0x0c50-0x0c52]
[ 0.931720] pnp 00:0a: [io 0x0c6c]
[ 0.931722] pnp 00:0a: [io 0x0c6f]
[ 0.931724] pnp 00:0a: [io 0x0cd0-0x0cdb]
[ 0.931727] pnp 00:0a: [io 0x0840-0x0847]
[ 0.931806] system 00:0a: [io 0x0400-0x04cf] has been reserved
[ 0.931810] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.931813] system 00:0a: [io 0x04d6] has been reserved
[ 0.931817] system 00:0a: [io 0x0680-0x06ff] has been reserved
[ 0.931820] system 00:0a: [io 0x077a] has been reserved
[ 0.931823] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.931828] system 00:0a: [io 0x0c14] has been reserved
[ 0.931831] system 00:0a: [io 0x0c50-0x0c52] has been reserved
[ 0.931834] system 00:0a: [io 0x0c6c] has been reserved
[ 0.931837] system 00:0a: [io 0x0c6f] has been reserved
[ 0.931840] system 00:0a: [io 0x0cd0-0x0cdb] has been reserved
[ 0.931844] system 00:0a: [io 0x0840-0x0847] has been reserved
[ 0.931847] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.931923] pnp 00:0b: [mem 0xff700000-0xff70ffff]
[ 0.931926] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.931928] pnp 00:0b: [mem 0xff800000-0xffffffff]
[ 0.931977] system 00:0b: [mem 0xff700000-0xff70ffff] has been reserved
[ 0.931981] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.931985] system 00:0b: [mem 0xff800000-0xffffffff] has been reserved
[ 0.931989] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.933557] pnp: PnP ACPI: found 12 devices
[ 0.933560] ACPI: ACPI bus type pnp unregistered
[ 0.941624] pci 0000:00:01.0: address space collision: [mem
0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xff800000-0xffffffff]
[ 0.941643] PCI: max bus depth: 1 pci_try_num: 2
[ 0.941675] pci 0000:00:01.0: BAR 6: assigned [mem 0xf2c80000-0xf2c9ffff
pref]
[ 0.941684] pci 0000:00:02.4: BAR 15: assigned [mem 0xf2d00000-0xf2efffff
64bit pref]
[ 0.941689] pci 0000:00:02.4: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.941693] pci 0000:00:02.2: PCI bridge to [bus 01-04]
[ 0.941697] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
[ 0.941701] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff]
[ 0.941706] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf0ffffff
64bit pref]
[ 0.941712] pci 0000:00:02.3: PCI bridge to [bus 05-05]
[ 0.941716] pci 0000:00:02.3: bridge window [mem 0xf2b00000-0xf2bfffff]
[ 0.941723] pci 0000:00:02.4: PCI bridge to [bus 06-06]
[ 0.941726] pci 0000:00:02.4: bridge window [io 0x1000-0x1fff]
[ 0.941730] pci 0000:00:02.4: bridge window [mem 0xf2a00000-0xf2afffff]
[ 0.941734] pci 0000:00:02.4: bridge window [mem 0xf2d00000-0xf2efffff
64bit pref]
[ 0.941759] pci 0000:00:02.2: setting latency timer to 64
[ 0.941777] pci 0000:00:02.3: setting latency timer to 64
[ 0.941791] pci 0000:00:02.4: setting latency timer to 64
[ 0.941795] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.941798] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.941801] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.941803] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.941806] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.941809] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.941812] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.941814] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.941817] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.941819] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.941822] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.941825] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.941827] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.941830] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.941833] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.941835] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.941838] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff]
[ 0.941841] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff]
[ 0.941844] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.941846] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff]
[ 0.941849] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf0ffffff 64bit
pref]
[ 0.941852] pci_bus 0000:05: resource 1 [mem 0xf2b00000-0xf2bfffff]
[ 0.941855] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.941857] pci_bus 0000:06: resource 1 [mem 0xf2a00000-0xf2afffff]
[ 0.941860] pci_bus 0000:06: resource 2 [mem 0xf2d00000-0xf2efffff 64bit
pref]
[ 0.941991] NET: Registered protocol family 2
[ 0.947099] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.948635] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.951189] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.951503] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.951506] TCP reno registered
[ 0.951528] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.951583] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.951820] NET: Registered protocol family 1
[ 0.951841] pci 0000:00:01.0: Boot video device
[ 0.951871] ACPI: Cannot set device to a higher-powered state than parent
[ 0.951875] ACPI: Cannot set device to a higher-powered state than parent
[ 0.957661] PCI: CLS 64 bytes, default 64
[ 0.957737] Unpacking initramfs...
[ 1.242193] Freeing initrd memory: 11020k freed
[ 1.245818] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.245826] Placing 64MB software IO TLB between ffff880091540000 -
ffff880095540000
[ 1.245829] software IO TLB at phys 0x91540000 - 0x95540000
[ 1.245871] Simple Boot Flag at 0x44 set to 0x1
[ 1.246366] perf: AMD IBS detected (0x000000ff)
[ 1.246679] audit: initializing netlink socket (disabled)
[ 1.246694] type=2000 audit(1424699930.240:1): initialized
[ 1.263538] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.265006] VFS: Disk quotas dquot_6.5.2
[ 1.265052] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.265146] msgmni has been set to 13911
[ 1.265378] alg: No test for stdrng (krng)
[ 1.265421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 1.265426] io scheduler noop registered
[ 1.265428] io scheduler deadline registered
[ 1.265461] io scheduler cfq registered (default)
[ 1.265740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.265771] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.265773] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.266231] efifb: probing for efifb
[ 1.266978] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a280000,
using 5632k, total 5632k
[ 1.266982] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 1.266983] efifb: scrolling: redraw
[ 1.266987] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.273711] Console: switching to colour frame buffer device 200x56
[ 1.279717] fb0: EFI VGA frame buffer device
[ 1.279762] ERST: Table is not found!
[ 1.279764] GHES: HEST is not enabled!
[ 1.279861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.476778] Linux agpgart interface v0.103
[ 1.476958] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.479429] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.479440] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.479669] mousedev: PS/2 mouse device common for all mice
[ 1.479712] rtc_cmos 00:05: RTC can wake from S4
[ 1.479844] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.479867] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.479884] cpuidle: using governor ladder
[ 1.479886] cpuidle: using governor menu
[ 1.480188] TCP cubic registered
[ 1.480303] NET: Registered protocol family 10
[ 1.480918] Mobile IPv6
[ 1.480923] NET: Registered protocol family 17
[ 1.480929] Registering the dns_resolver key type
[ 1.481125] PM: Hibernation image not present or could not be loaded.
[ 1.481143] registered taskstats version 1
[ 1.482195] rtc_cmos 00:05: setting system clock to 2015-02-23 13:58:50 UTC
(1424699930)
[ 1.482304] Initializing network drop monitor service
[ 1.483949] Freeing unused kernel memory: 576k freed
[ 1.484121] Write protecting the kernel read-only data: 6144k
[ 1.487396] Freeing unused kernel memory: 644k freed
[ 1.490955] Freeing unused kernel memory: 688k freed
[ 1.494120] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.505043] udevd[58]: starting version 175
[ 1.529288] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.529377] r8169 0000:01:00.0: (unregistered net_device): unknown MAC,
using family default
[ 1.529386] r8169 0000:01:00.0: setting latency timer to 64
[ 1.529445] r8169 0000:01:00.0: irq 72 for MSI/MSI-X
[ 1.530080] r8169 0000:01:00.0: eth0: RTL8101e at 0xffffc90000046000,
00:8c:fa:86:90:5a, XID 04900000 IRQ 72
[ 1.533991] SCSI subsystem initialized
[ 1.540995] usbcore: registered new interface driver usbfs
[ 1.541030] usbcore: registered new interface driver hub
[ 1.545736] usbcore: registered new device driver usb
[ 1.546313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.546378] ehci_hcd 0000:00:12.0: EHCI Host Controller
[ 1.546421] ehci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 1
[ 1.546435] ehci_hcd 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.546474] ehci_hcd 0000:00:12.0: debug port 2
[ 1.546509] ehci_hcd 0000:00:12.0: irq 18, io mem 0xf2c6d000
[ 1.547644] libata version 3.00 loaded.
[ 1.551556] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.551561] ACPI: Thermal Zone [THZN] (24 C)
[ 1.553130] ACPI: Fan [FAN1] (off)
[ 1.556053] ehci_hcd 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 1.556105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.556109] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.556112] usb usb1: Product: EHCI Host Controller
[ 1.556115] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.556118] usb usb1: SerialNumber: 0000:00:12.0
[ 1.556322] hub 1-0:1.0: USB hub found
[ 1.556329] hub 1-0:1.0: 2 ports detected
[ 1.556516] ehci_hcd 0000:00:13.0: EHCI Host Controller
[ 1.556535] ehci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 2
[ 1.556545] ehci_hcd 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.556570] ehci_hcd 0000:00:13.0: debug port 2
[ 1.556590] ehci_hcd 0000:00:13.0: irq 18, io mem 0xf2c6c000
[ 1.568037] ehci_hcd 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 1.568085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.568089] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.568092] usb usb2: Product: EHCI Host Controller
[ 1.568095] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.568097] usb usb2: SerialNumber: 0000:00:13.0
[ 1.568316] hub 2-0:1.0: USB hub found
[ 1.568325] hub 2-0:1.0: 2 ports detected
[ 1.568738] ahci 0000:00:11.0: version 3.0
[ 1.568856] ahci 0000:00:11.0: irq 73 for MSI/MSI-X
[ 1.568930] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3
impl SATA mode
[ 1.568935] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs
pio slum part
[ 1.569433] scsi0 : ahci
[ 1.570201] scsi1 : ahci
[ 1.847146] ata1: SATA max UDMA/133 abar m1024@0xf2c6e000 port 0xf2c6e100
irq 73
[ 1.847152] ata2: SATA max UDMA/133 abar m1024@0xf2c6e000 port 0xf2c6e180
irq 73
[ 1.847198] ACPI: Cannot set device to a higher-powered state than parent
[ 1.847202] ACPI: Cannot set device to a higher-powered state than parent
[ 1.847243] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 1.847248] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.847272] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 3
[ 1.847524] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 1.847531] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 1.847538] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 1.847545] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 1.847552] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[ 1.847667] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.847671] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.847674] usb usb3: Product: xHCI Host Controller
[ 1.847676] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.847679] usb usb3: SerialNumber: 0000:00:10.0
[ 1.847820] xHCI xhci_add_endpoint called for root hub
[ 1.847824] xHCI xhci_check_bandwidth called for root hub
[ 1.847871] hub 3-0:1.0: USB hub found
[ 1.847880] hub 3-0:1.0: 2 ports detected
[ 1.847967] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.847975] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 4
[ 1.850848] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.850852] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.850855] usb usb4: Product: xHCI Host Controller
[ 1.850857] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.850860] usb usb4: SerialNumber: 0000:00:10.0
[ 1.850985] xHCI xhci_add_endpoint called for root hub
[ 1.850987] xHCI xhci_check_bandwidth called for root hub
[ 1.851026] hub 4-0:1.0: USB hub found
[ 1.851033] hub 4-0:1.0: 2 ports detected
[ 1.868231] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.000736] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[ 2.000740] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.001022] hub 1-1:1.0: USB hub found
[ 2.001106] hub 1-1:1.0: 4 ports detected
[ 2.112223] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.244182] Refined TSC clocksource calibration: 1996.255 MHz.
[ 2.244190] Switching to clocksource tsc
[ 2.245279] usb 2-1: New USB device found, idVendor=0438, idProduct=7900
[ 2.245284] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.245598] hub 2-1:1.0: USB hub found
[ 2.245647] hub 2-1:1.0: 4 ports detected
[ 2.336205] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.336232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.339619] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208FB, TF01, max UDMA/100
[ 2.344315] ata2.00: configured for UDMA/100
[ 2.370928] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1P4M, max UDMA/100
[ 2.370933] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 2.373028] ata1.00: configured for UDMA/100
[ 2.373266] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 AX1P
PQ: 0 ANSI: 5
[ 2.381339] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208FB TF01
PQ: 0 ANSI: 5
[ 2.385744] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 2.385867] sd 0:0:0:0: [sda] Write Protect is off
[ 2.385871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.385916] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.389967] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 2.389973] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.390214] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.511685] sda: sda1 sda2 sda3 sda4
[ 2.512480] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.516073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.516150] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.532251] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[ 2.642473] usb 2-1.1: New USB device found, idVendor=0930, idProduct=0225
[ 2.642478] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.642481] usb 2-1.1: Product: BCM43142A0
[ 2.642483] usb 2-1.1: Manufacturer: Broadcom Corp
[ 2.642486] usb 2-1.1: SerialNumber: 645A04D4D14B
[ 2.728864] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
[ 2.919187] usb 2-1.2: New USB device found, idVendor=10f1, idProduct=1a5b
[ 2.919192] usb 2-1.2: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 2.919196] usb 2-1.2: Product: TOSHIBA Web Camera - HD
[ 2.919198] usb 2-1.2: Manufacturer: Sonix Technology Co., Ltd.
[ 3.192245] PM: Starting manual resume from disk
[ 3.192249] PM: Hibernation image partition 8:3 present
[ 3.192251] PM: Looking for hibernation image.
[ 3.229589] PM: Image not found (code -22)
[ 3.229593] PM: Hibernation image not present or could not be loaded.
[ 3.663637] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 5.488946] udevd[358]: starting version 175
[ 6.193682] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.193691] ACPI: Power Button [PWRB]
[ 6.193769] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 6.194144] ACPI: Lid Switch [LID0]
[ 6.194232] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.194237] ACPI: Power Button [PWRF]
[ 6.206725] ACPI: acpi_idle registered with cpuidle
[ 6.252838] acpi device:00: registered as cooling_device5
[ 6.252921] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 6.252933] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.342424] EFI Variables Facility v0.08 2004-May-17
[ 6.443743] wmi: Mapper loaded
[ 6.474251] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device -
installing RFKill handler
[ 6.479003] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with
ACPI region SMB0 [io 0xb00-0xb0f]
[ 6.479008] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.524215] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 6.560626] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.846283] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.883838] ACPI: Battery Slot [BAT0] (battery present)
[ 6.884388] ACPI: AC Adapter [ADP0] (on-line)
[ 6.983340] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 6.983695] input: Toshiba input device as /devices/virtual/input/input6
[ 7.075528] Registered led device: toshiba::illumination
[ 7.112799] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
[ 7.112829] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 7.128789] cfg80211: Calling CRDA to update world regulatory domain
[ 7.242062] powernow-k8: Found 1 AMD A8-6410 APU with AMD Radeon R5 Graphics
(4 cpu cores) (version 2.20.00)
[ 7.242079] powernow-k8: Core Performance Boosting: on.
[ 7.242176] powernow-k8: 0 : pstate 0 (2000 MHz)
[ 7.242178] powernow-k8: 1 : pstate 1 (1800 MHz)
[ 7.242181] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 7.242183] powernow-k8: 3 : pstate 3 (1400 MHz)
[ 7.242185] powernow-k8: 4 : pstate 4 (1200 MHz)
[ 7.242187] powernow-k8: 5 : pstate 5 (1000 MHz)
[ 7.301456] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id:
0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 7.334675] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 7.416933] wl: module license 'unspecified' taints kernel.
[ 7.416943] Disabling lock debugging due to kernel taint
[ 7.443146] wl 0000:05:00.0: setting latency timer to 64
[ 7.484963] eth1: Broadcom BCM4365 802.11 Hybrid Wireless Controller
6.30.223.248 (r487574)
[ 7.735903] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.736217] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 7.737043] snd_hda_intel 0000:00:14.2: irq 80 for MSI/MSI-X
[ 7.973434] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input9
[ 7.977328] input: HD-Audio Generic Mic as
/devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 7.977561] input: HD-Audio Generic Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 8.368133] cfg80211: World regulatory domain updated:
[ 8.368143] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 8.368151] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 8.368158] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 8.368164] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm)
[ 8.368171] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A,
2000 mBm)
[ 8.368177] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A,
2000 mBm)
[ 8.368183] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm)
[ 8.368189] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm)
[ 8.368195] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
0 mBm)
[ 8.873485] Linux media interface: v0.10
[ 8.910837] Linux video capture interface: v2.00
[ 9.256728] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD
(10f1:1a5b)
[ 9.290348] input: TOSHIBA Web Camera - HD as
/devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[ 9.290619] usbcore: registered new interface driver uvcvideo
[ 9.290625] USB Video Class driver (1.1.1)
[ 11.333817] Adding 7300092k swap on /dev/sda3. Priority:-1 extents:1
across:7300092k
[ 11.369222] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 11.610509] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 11.739485] loop: module loaded
[ 12.664404] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 13.135112] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.259372] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.340940] RPC: Registered named UNIX socket transport module.
[ 14.340943] RPC: Registered udp transport module.
[ 14.340946] RPC: Registered tcp transport module.
[ 14.340947] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.382835] FS-Cache: Loaded
[ 14.440146] FS-Cache: Netfs 'nfs' registered for caching
[ 14.456395] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 17.025940] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input13
[ 19.404343] Bluetooth: Core ver 2.16
[ 19.404404] NET: Registered protocol family 31
[ 19.404410] Bluetooth: HCI device and connection manager initialized
[ 19.404418] Bluetooth: HCI socket layer initialized
[ 19.404423] Bluetooth: L2CAP socket layer initialized
[ 19.404438] Bluetooth: SCO socket layer initialized
[ 19.441848] Bluetooth: RFCOMM TTY layer initialized
[ 19.441863] Bluetooth: RFCOMM socket layer initialized
[ 19.441869] Bluetooth: RFCOMM ver 1.11
[ 19.542603] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.542612] Bluetooth: BNEP filters: protocol multicast
[ 19.974417] lp: driver loaded but no devices found
[ 19.996006] ppdev: user-space parallel port driver
[ 21.273140] r8169 0000:01:00.0: eth0: link down
[ 21.276213] ADDRCONF(NETDEV_UP): eth0: link is not ready
/etc/gdm3/Xsession: Beginning session setup...
localuser:dominique being added to access control list
openConnection: connect: Aucun fichier ou dossier de ce type
cannot connect to brltty at :0
GNOME_KEYRING_CONTROL=/home/dominique/.cache/keyring-HcGxWf
GNOME_KEYRING_CONTROL=/home/dominique/.cache/keyring-HcGxWf
SSH_AUTH_SOCK=/home/dominique/.cache/keyring-HcGxWf/ssh
GNOME_KEYRING_CONTROL=/home/dominique/.cache/keyring-HcGxWf
SSH_AUTH_SOCK=/home/dominique/.cache/keyring-HcGxWf/ssh
GPG_AGENT_INFO=/home/dominique/.cache/keyring-HcGxWf/gpg:0:1
GNOME_KEYRING_CONTROL=/home/dominique/.cache/keyring-HcGxWf
SSH_AUTH_SOCK=/home/dominique/.cache/keyring-HcGxWf/ssh
GPG_AGENT_INFO=/home/dominique/.cache/keyring-HcGxWf/gpg:0:1
(gnome-settings-daemon:3741): color-plugin-WARNING **: failed to get edid:
unable to get EDID for output
(gnome-settings-daemon:3741): color-plugin-WARNING **: unable to get EDID for
xrandr-default: unable to get EDID for output
(gnome-settings-daemon:3741): color-plugin-WARNING **: failed to reset
xrandr-default gamma tables: gamma size is zero
(gnome-panel:3813): Gtk-CRITICAL **: gtk_accelerator_parse_with_keycode:
assertion `accelerator != NULL' failed
** (gnome-panel:3813): WARNING **: Unable to parse mouse modifier '(null)'
Initializing tracker-store...
Initializing tracker-miner-fs...
** Message: applet now removed from the notification area
Tracker-Message: Setting up monitor for changes to config
file:'/home/dominique/.config/tracker/tracker-miner-fs.cfg'
Tracker-Message: Setting up monitor for changes to config
file:'/home/dominique/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/dominique/.local/share/tracker/tracker-miner-fs.log'
(gnome-panel:3813): Gtk-CRITICAL **: gtk_accelerator_parse_with_keycode:
assertion `accelerator != NULL' failed
** (gnome-panel:3813): WARNING **: Unable to parse mouse modifier '(null)'
Tracker-Message: Setting up monitor for changes to config
file:'/home/dominique/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/dominique/.local/share/tracker/tracker-store.log'
(gnome-panel:3813): GLib-GObject-WARNING **:
/tmp/buildd/glib2.0-2.33.12+really2.32.4/./gobject/gsignal.c:2459: signal
`size_request' is invalid for instance `0xdfc120'
** Message: applet now embedded in the notification area
(gnome-settings-daemon:3741): PackageKit-WARNING **: couldn't parse execption
'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by backend', please report
(gnome-settings-daemon:3741): updates-plugin-WARNING **: failed to get
upgrades:
GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by backend
(notification-daemon:3878): Gtk-WARNING **: gtk_widget_size_allocate(): attempt
to allocate widget with width -23 and height 27
(gnome-control-center:4814): Gdk-WARNING **: The program 'gnome-control-center'
received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadRequest (invalid request code or no such operation)'.
(Details: serial 147 error_code 1 request_code 153 minor_code 19)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
1424700606096 addons.update-checker WARN Update manifest for
{972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
1424700606278 addons.update-checker WARN Update manifest for
langpack...@iceweasel.mozilla.org did not contain an updates property
Avertissement du gestionnaire de fenêtres : Buggy client sent a
_NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2000003 (S'authenti)
Avertissement du gestionnaire de fenêtres : meta_window_activate called by a
pager with a 0 timestamp; the pager needs to be fixed.
Avertissement du gestionnaire de fenêtres : Buggy client sent a
_NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2000003 (S'authenti)
Avertissement du gestionnaire de fenêtres : meta_window_activate called by a
pager with a 0 timestamp; the pager needs to be fixed.
Discarding: 14 over 15
Discarding: 14 over 15
(gnome-control-center:5125): Gdk-WARNING **: The program 'gnome-control-center'
received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadRequest (invalid request code or no such operation)'.
(Details: serial 147 error_code 1 request_code 153 minor_code 19)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
(gnome-settings-daemon:3741): PackageKit-WARNING **: couldn't parse execption
'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by backend', please report
(gnome-settings-daemon:3741): updates-plugin-WARNING **: failed to get
upgrades:
GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by backend
(gnome-settings-daemon:3741): PackageKit-WARNING **: couldn't parse execption
'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by backend', please report
(gnome-settings-daemon:3741): updates-plugin-WARNING **: failed to get
upgrades:
GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by backend
