Package: src:linux
Version: 3.16.7-ckt4-3
Severity: normal
Dear Maintainer,
I upgraded a Wheezy installation to Testing/Jessie. All in all it was without
big surprises.
Except that most of the time after some time (e.g. 15 seconds) after the login
via kdm into
the kde desktop the system hangs.
Staying at the login screen did not trigger these hangs.
I connected via ssh and inspected the dmesg output before logging in to kde.
When later the hang happened there was before always such an entry:
[ 12.423002] ------------[ cut here ]------------
[ 12.423023] WARNING: CPU: 0 PID: 38 at
/build/linux-AmBmwr/linux-3.16.7-ckt4/include/linux/kref.h:47
kobject_get+0x35/0x40()
[ 12.423027] Modules linked in: acpi_cpufreq(+) processor loop fuse
parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod
crc_t10dif crct10dif_generic crct10dif_common rtsx_pci_sdmmc mmc_core ahci
libahci rtsx_pci libata uhci_hcd ehci_pci mfd_core ehci_hcd scsi_mod usbcore
usb_common r8169 mii thermal thermal_sys
[ 12.423085] CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 3.16.0-4-686-pae #1
Debian 3.16.7-ckt4-3
[ 12.423090] Hardware name: Acer AOD270/JE01_CT , BIOS V1.03 01/03/2012
[ 12.423098] Workqueue: kacpi_notify acpi_os_execute_deferred
[ 12.423103] c154e9ac f57e1cf0 c1475f58 00000000 c1056ae4 c154eae4 00000000
00000026
[ 12.423114] c154e9ac 0000002f c12511d5 c12511d5 00000009 f4c4e974 00000202
00000000
[ 12.423125] f57e1d00 c1056ba2 00000009 00000000 f57e1d18 c12511d5 f4c4e900
c136e7dc
[ 12.423135] Call Trace:
[ 12.423146] [<c1475f58>] ? dump_stack+0x3e/0x4e
[ 12.423155] [<c1056ae4>] ? warn_slowpath_common+0x84/0xa0
[ 12.423163] [<c12511d5>] ? kobject_get+0x35/0x40
[ 12.423169] [<c12511d5>] ? kobject_get+0x35/0x40
[ 12.423177] [<c1056ba2>] ? warn_slowpath_null+0x22/0x30
[ 12.423184] [<c12511d5>] ? kobject_get+0x35/0x40
[ 12.423192] [<c136e7dc>] ? cpufreq_cpu_get+0x5c/0xa0
[ 12.423199] [<c136f17d>] ? cpufreq_update_policy+0x1d/0x180
[ 12.423207] [<c136f2e0>] ? cpufreq_update_policy+0x180/0x180
[ 12.423220] [<f8095381>] ? cpufreq_set_cur_state.part.3+0x6e/0x75
[processor]
[ 12.423229] [<f8095476>] ? processor_set_cur_state+0x8a/0xc3 [processor]
[ 12.423242] [<f7e4bc96>] ? thermal_cdev_update+0x96/0x120 [thermal_sys]
[ 12.423254] [<f7e4e2c0>] ? step_wise_throttle+0x40/0x70 [thermal_sys]
[ 12.423265] [<f7e4c445>] ? handle_thermal_trip+0x45/0x150 [thermal_sys]
[ 12.423275] [<f7e533bc>] ? thermal_get_temp+0x1d/0x3a [thermal]
[ 12.423285] [<f7e4c5c9>] ? thermal_zone_device_update+0x79/0xe0
[thermal_sys]
[ 12.423294] [<c12bfba3>] ? acpi_device_notify+0x16/0x18
[ 12.423301] [<c12ce70a>] ? acpi_ev_notify_dispatch+0x35/0x49
[ 12.423307] [<c12bbd6d>] ? acpi_os_execute_deferred+0x11/0x1b
[ 12.423315] [<c106d955>] ? process_one_work+0x115/0x380
[ 12.423322] [<c1062853>] ? mod_timer+0x103/0x190
[ 12.423329] [<c106e113>] ? worker_thread+0xf3/0x470
[ 12.423336] [<c108fe3f>] ? __wake_up_locked+0x1f/0x30
[ 12.423343] [<c106e020>] ? create_and_start_worker+0x50/0x50
[ 12.423350] [<c107334b>] ? kthread+0x9b/0xb0
[ 12.423359] [<c147ad81>] ? ret_from_kernel_thread+0x21/0x30
[ 12.423365] [<c10732b0>] ? kthread_create_on_node+0x110/0x110
[ 12.423371] ---[ end trace 863dcb3f68f118cb ]---
On some tries there was such a message missing and then the hang did not
happen, so
I think this could be related.
I was able to collect one dmesg output right before the hang with some more
stack traces introduced by:
[ 179.269865] Watchdog detected hard LOCKUP on cpu 1
....
[ 184.271061] INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by
3, t=5254 jiffies, g=6837, c=6836, q=171573)
Hangs happened also for some newer kernels (from experimantal, snapshot or
Jessie):
linux-image-3.19.0-trunk-686-pae_3.19-1~exp1_i386.deb
linux-image-3.18.0-trunk-686-pae_3.18.6-1%7Eexp1_i386.deb
linux-image-3.16.0-4-686-pae_3.16.7-ckt4-3_i386.deb
But on older kernels it seems not to happen (also from snapshot or Wheezy):
linux-image-3.14-2-686-pae_3.14.15-2_i386.deb
linux-image-3.10-3-686-pae_3.10.11-1_i386.deb
linux-image-3.2.0-4-686-pae_3.2.65-1_i386.deb
Also I assume this is probably specific to this computer:
Acer ASPIRE ONE D270-Dws
I am not confident if severity and the package I opened the ticket is right.
If there is anything I can supply I will try, but as this is not my device,
my access to it will be limited in some days and could then take some time.
Kind regards,
Bernhard
-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae
root=UUID=b9d840bf-00c6-461b-b55f-d2418ba19e0c ro ipv6.disable=1 quiet
** Not tainted
** Kernel log:
[ 12.975954] ACPI: Power Button [PWRF]
[ 13.112377] systemd-journald[163]: Received request to flush runtime journal
from PID 1
[ 13.147840] ACPI: AC Adapter [ACAD] (on-line)
[ 13.240411] ACPI: Battery Slot [BAT1] (battery present)
[ 13.293813] wmi: Mapper loaded
[ 13.336308] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 13.590183] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts
with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
[ 13.590204] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts
with OpRegion 0x00000400-0x0000042f (\SWC1) (20140424/utaddress-258)
[ 13.590219] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 13.590229] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts
with OpRegion 0x00000500-0x0000053b (\GPIO) (20140424/utaddress-258)
[ 13.590243] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 13.590250] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts
with OpRegion 0x00000500-0x0000053b (\GPIO) (20140424/utaddress-258)
[ 13.590263] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 13.590268] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.621157] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 13.701892] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.724191] [drm] Initialized drm 1.1.0 20060810
[ 13.928311] gma500 0000:00:02.0: irq 46 for MSI/MSI-X
[ 13.963370] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.971345] acpi device:1c: registered as cooling_device4
[ 13.971692] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 13.971993] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.972000] [drm] No driver support for vblank timestamp query.
[ 14.269544] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 14.269587] acer_wmi: Function bitmap for Communication Button: 0x1
[ 14.269603] acer_wmi: Brightness must be controlled by acpi video driver
[ 14.271211] input: Acer WMI hotkeys as /devices/virtual/input/input13
[ 14.272156] input: Acer BMA150 accelerometer as
/devices/virtual/input/input14
[ 14.332453] gma500 0000:00:02.0: trying to get vblank count for disabled
pipe 0
[ 14.332635] gma500 0000:00:02.0: trying to get vblank count for disabled
pipe 0
[ 14.351191] iTCO_vendor_support: vendor-support=0
[ 14.375996] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.376095] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 14.376553] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.498584] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 14.498629] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev
0x24, class 0x0)
[ 14.498661] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
rev 0x18, class 0x0)
[ 14.498720] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11,
class 0x0)
[ 14.511441] bcma: bus0: Bus registered
[ 14.556867] checking generic (3f800000 258000) vs hw (3f800000 7bf000)
[ 14.556875] fb: switching to psbdrmfb from simple
[ 14.556961] Console: switching to colour dummy device 80x25
[ 14.557555] fbcon: psbdrmfb (fb0) is primary device
[ 14.867787] cfg80211: Calling CRDA to update world regulatory domain
[ 14.886418] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 528321
[ 14.930772] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input11
[ 14.931266] Console: switching to colour frame buffer device 128x37
[ 14.941421] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 14.941426] gma500 0000:00:02.0: registered panic notifier
[ 14.955498] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on
minor 0
[ 14.956704] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 15.357728] sound hdaudioC0D1: ALC269VB: SKU not ready 0x598301f0
[ 15.358455] sound hdaudioC0D1: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 15.358466] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.358475] sound hdaudioC0D1: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 15.358482] sound hdaudioC0D1: mono: mono_out=0x0
[ 15.358489] sound hdaudioC0D1: inputs:
[ 15.358499] sound hdaudioC0D1: Internal Mic=0x1b
[ 15.358507] sound hdaudioC0D1: Mic=0x18
[ 15.366346] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D1/input17
[ 15.367360] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 15.367775] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 15.368340] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 15.485709] media: Linux media interface: v0.10
[ 15.521085] Support for cores revisions 0x17 and 0x18 disabled by module
param allhwsupport=0. Try b43.allhwsupport=1
[ 15.521422] b43: probe of bcma0:0 failed with error -524
[ 15.521546] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 15.539709] Linux video capture interface: v2.00
[ 16.034377] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 16.038756] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d250)
[ 16.044299] input: 1.3M HD WebCam as
/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.0/input/input21
[ 16.044587] usbcore: registered new interface driver uvcvideo
[ 16.044595] USB Video Class driver (1.1.1)
[ 16.083028] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.208943] cfg80211: World regulatory domain updated:
[ 17.208952] cfg80211: DFS Master region: unset
[ 17.208956] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.208963] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 17.208969] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 17.208974] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 17.208980] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 17.208986] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 17.208992] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 17.208997] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 17.209003] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 18.990223] RPC: Registered named UNIX socket transport module.
[ 18.990238] RPC: Registered udp transport module.
[ 18.990246] RPC: Registered tcp transport module.
[ 18.990253] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.048251] FS-Cache: Loaded
[ 19.113312] FS-Cache: Netfs 'nfs' registered for caching
[ 19.234345] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 29.775533] r8169 0000:01:00.0: firmware: direct-loading firmware
rtl_nic/rtl8105e-1.fw
[ 29.959488] r8169 0000:01:00.0 eth0: link down
[ 29.959568] r8169 0000:01:00.0 eth0: link down
[ 30.300881] brcmsmac bcma0:0: firmware: direct-loading firmware
brcm/bcm43xx-0.fw
[ 30.350116] brcmsmac bcma0:0: firmware: direct-loading firmware
brcm/bcm43xx_hdr-0.fw
[ 30.583542] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 30.583757] brcmsmac bcma0:0: brcms_ops_config: change power-save mode:
false (implement)
[ 31.592105] r8169 0000:01:00.0 eth0: link up
** Model information
not available
** Loaded modules:
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
arc4
uvcvideo
brcmsmac
videobuf2_vmalloc
cordic
videobuf2_memops
brcmutil
videobuf2_core
v4l2_common
videodev
b43
media
mac80211
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
cfg80211
snd_hda_intel
ssb
snd_hda_controller
rng_core
snd_hda_codec
pcmcia
joydev
pcmcia_core
bcma
snd_hwdep
iTCO_wdt
iTCO_vendor_support
acer_wmi
sparse_keymap
rfkill
snd_pcm
rtsx_pci_ms
memstick
snd_timer
gma500_gfx
drm_kms_helper
snd
coretemp
soundcore
drm
shpchp
psmouse
pcspkr
lpc_ich
evdev
serio_raw
video
i2c_i801
i2c_algo_bit
i2c_core
wmi
battery
ac
button
acpi_cpufreq
processor
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
rtsx_pci_sdmmc
mmc_core
ahci
libahci
ehci_pci
uhci_hcd
libata
ehci_hcd
scsi_mod
rtsx_pci
r8169
mii
mfd_core
usbcore
usb_common
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 04:7d:7b:23:58:e9 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.33/24 brd 192.168.178.255 scope global dynamic eth0
valid_lft 862875sec preferred_lft 862875sec
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 64:27:37:7b:7f:a8 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 12296 71 0 0 0 0 0 0 12296
71 0 0 0 0 0 0
eth0: 2592443 3519 0 0 0 0 0 0 564689
2840 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3562 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
3560 incoming packets delivered
2872 requests sent out
22 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
9 active connections openings
4 passive connection openings
3 failed connection attempts
1 connection resets received
2 connections established
3244 segments received
2686 segments send out
2 segments retransmited
0 bad segments received.
5 resets sent
Udp:
289 packets received
0 packets to unknown port received.
0 packet receive errors
173 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
2 TCP sockets finished time wait in fast timer
12 delayed acks sent
2 packets directly queued to recvmsg prequeue.
1625 packet headers predicted
124 acknowledgments not containing data payload received
1033 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
Detected reordering 1 times using time stamp
1 congestion windows partially recovered using Hoe heuristic
2 fast retransmits
2 DSACKs received
1 connections reset due to early user close
TCPSackShiftFallback: 1
TCPRcvCoalesce: 246
TCPOFOQueue: 262
TCPAutoCorking: 62
TCPOrigDataSent: 1331
IpExt:
InMcastPkts: 163
OutMcastPkts: 46
InBcastPkts: 19
OutBcastPkts: 4
InOctets: 2558888
OutOctets: 535833
InMcastOctets: 23992
OutMcastOctets: 6753
InBcastOctets: 2858
OutBcastOctets: 196
InNoECTPkts: 3564
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM
Controller [8086:0bf1] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor
D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 09) (prog-if 00
[VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at 46000000 (32-bit, non-prefetchable) [size=1M]
Region 1: I/O ports at 50d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information: Len=07 <?>
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41e1
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 46100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4142
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=02
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 45000000-45ffffff
Prefetchable memory behind bridge: 0000000040000000-0000000040ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4181
Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 44000000-44ffffff
Prefetchable memory behind bridge: 0000000041000000-0000000041ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4191
Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 43000000-43ffffff
Prefetchable memory behind bridge: 0000000042000000-0000000042ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41a1
Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=03 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at 50a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 5080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 5060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 46105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device [1025:061f]
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA
Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 50c8 [size=8]
Region 1: I/O ports at 50dc [size=4]
Region 2: I/O ports at 50c0 [size=8]
Region 3: I/O ports at 50d8 [size=4]
Region 4: I/O ports at 5020 [size=16]
Region 5: Memory at 46104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0c00c Data: 41d1
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at 40004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 40000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-,
OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 73-0b-00-00-36-4c-e0-00
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn
Wireless Network Adapter [14e4:4727] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e042]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 44000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency
L0s <4us, L1 <64us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-37-ff-ff-7b-64-27
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI
Express Card Reader [10ec:5209] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:061f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 43001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41c1
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1
<8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-,
OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel driver in use: rtsx_pci
** USB devices:
Bus 005 Device 002: ID 064e:d250 Suyin Corp.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing-proposed-updates'),
(500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
ii libc6-i686 2.19-13
Versions of packages linux-image-3.16.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-20
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.43
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:
linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae:
true
linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae:
false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
