Package: usb-modeswitch
Version: 2.2.0+repack0-2
Severity: normal
Tags: d-i
Dear Maintainer,
* What led up to the situation?
The default IOMMU setting in the BIOS for a GIGABYTE motherboard is off.
Attempting to install a Debian system (Wheezy or Jessie AMD-64) with this
setting results in not recognizing USB mouse or keyboard. However, booting with
Squeeze or Wheezy 386 does work with this setting.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Turned on the IOMMU support
* What was the outcome of this action?
Although the USB-2 mouse and keyboard are dealt with effectively with IOMMU
enabled, there are ~550 lines of "page fault" reported by dmesg at bootup.
Further investigaiton finds that failure to access the northbridge (AMD 970
chip) USB-3 support is the cause of the page faults.
* What outcome did you expect instead?
Everything to work
-- System Information:
Debian Release: 8.0
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages usb-modeswitch depends on:
ii libc6 2.19-15
ii libjim0.75 0.75-1
ii libusb-1.0-0 2:1.0.19-1
ii usb-modeswitch-data 20140529-1
usb-modeswitch recommends no packages.
Versions of packages usb-modeswitch suggests:
pn comgt <none>
pn wvdial <none>
-- Configuration Files:
/etc/usb_modeswitch.conf changed:
DisableSwitching=0
EnableLogging=1
SetStorageDelay=4
TargetVendor= 0x1199
TargetProduct= 0x9051
TargetCclass= 0xff
MessageContent="55534243785634120100000080000601000000000000000000000000000000"
-- no debconf information
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
