I *guess* I'm sitting on the same problem, though here the report would read slightly differently:

Had this since I added 2.6.8-1 to 2.6.7: 2.6.8 starts and kind-of freezes
after some lines of kernel-error-messages; after mounting the harddisk.
Didn't bother, hoping that it would go away with the next version. But on
2.6.8-2 the same thing happens. 2.6.7 boots fine, though.
It boots, does a lot of things then writes some error messages. No,
/var/log/kern is and remains empty whenever I (fail to) boot to 2.6.8. So here is
what happens:
...
[<c01042ad>] kernel-Thread_helper+0x5/0x18
Code: 89 01 89 48 04 b8 00 01 10 00 c7 43 04 00 02 20 00 8d 9a 8c
<6>note: kblockd/0[42] exited with preempt_count 1
Yenta:


[then it continues for a few lines until:]

...
ieee1394: Host added:ID:Bus [0-00:1023] GUID [434fc0003ab22838]

From then onwards, nothing. It still echoes Enter; but nothing more
happens. Ctrl-Alt-Del doesn't work, Ctrl-C, Ctrl-D don't do anything
either.

Then I found this bug (292478). And checked. If I unplug the usb burner, it does boot; so I guess it is the same bug. But here, 2.6.7 boots great with burner (and burns great). Only with 2.6.8 the trouble crept in.
I'm sitting on a DELL Latitude D400, and here I attach the whole dmesg. Of cause, I boot without usb-burner; and attach the device later, so that you know its details (scroll down):




Linux version 2.6.8-2-686 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Mon Jan 24 03:58:38 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000000feaa000 (usable)
BIOS-e820: 000000000feaa000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
On node 0 totalpages: 65194
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61098 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Dell Latitude with broken BIOS detected. Refusing to enable the local APIC.
ACPI: RSDP (v000 DELL ) @ 0x000fdf00
ACPI: RSDT (v001 DELL CPi R 0x27d30a0f ASL 0x00000061) @ 0x0fef0000
ACPI: FADT (v001 DELL CPi R 0x27d30a0f ASL 0x00000061) @ 0x0fef0400
ACPI: ASF! (v016 DELL CPi R 0x27d30a0f ASL 0x00000061) @ 0x0fef0800
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: root=/dev/hda7 ro
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1399.107 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 250468k/260776k available (1550k kernel code, 9596k reserved, 688k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2777.08 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4704k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
pnp: 00:01: ioport range 0x800-0x85f has been reserved
pnp: 00:01: ioport range 0x860-0x87f has been reserved
pnp: 00:01: ioport range 0x880-0x8bf has been reserved
pnp: 00:01: ioport range 0x8c0-0x8ff has been reserved
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:01: ioport range 0x900-0x97f has been reserved
pnp: 00:01: ioport range 0xf400-0xf4fe has been reserved
PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:01.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:01.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 7 (level, low) -> IRQ 7
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S4bios S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4704 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
hda: HTS548040M9AT00, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 >
p3: <openbsd: p15 p16 p17 p18 p19bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
>
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 506008k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda7, internal journal
SCSI subsystem initialized
Capability LSM initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda14, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v3.10 (September 14, 2004)
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
tg3: tg3_request_firmware (eth%d): Couldn't get firmware "tg3/tso_5705-1.1.0".
tg3: eth%d: Firmware "tg3/tso_5705-1.1.0" not loaded; continuing without TSO.
eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0f:1f:aa:2a:73
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
ieee80211_crypt: registered algorithm 'NULL'
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.0.2
ipw2100: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 7 (level, low) -> IRQ 7
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000bf80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0000bf40
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0000bf20
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
tg3: eth0: Link is up at 10 Mbps, half duplex.
tg3: eth0: Flow control is off for TX and off for RX.
input: PS/2 Generic Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PC Speaker
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem d09b4c00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hw_random: cannot enable RNG, aborting
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49640 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:01:01.0 [1028:0139]
Yenta: ISA IRQ mask 0x0478, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:01:01.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:01:01.1 [1028:0139]
Yenta: ISA IRQ mask 0x0478, PCI irq 11
Socket status: 30000047
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]>
ACPI: PCI interrupt 0000:01:01.2[A] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[fcfef800-fcfeffff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc0003ab22838]
ip1394: $Rev: 1224 $ Ben Collins <[EMAIL PROTECTED]>
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02ff020(lo)
IPv6 over IPv4 tunneling driver
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Thermal Zone [THM] (45 C)
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: no IPv6 routers present
eth1: no IPv6 routers present
[drm] Initialized i830 1.3.2 20021108 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device
[drm] Initialized i830 1.3.2 20021108 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2)
mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary


usb 4-4: new high speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
 Vendor: HL-DT-ST  Model: RW/DVD GCC-4241N  Rev: A101
 Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.


Uwe



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Reply via email to