Package: installation-reports Boot method: CD and Network (PXE) Image version: http://cdimage.debian.org/debian-cd/8.0.0/amd64/iso-cd/debian-8.0.0-amd64-netinst.iso Date: 5:00PM 07/05/2015
Machine: Dell Vostro 980 Processor: Memory: Partitions: Wiped - no partitions Output of lspci -knn (or lspci -nn): Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Install base system: [E] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [E] Install boot loader: [E] Overall install: [E] Comments/Problems: When I get to the Partition Disks menu, I only have 1 option - Configure iSCSI. Did a fdisk -l to view my disks and it saw my Maxtor HD. I tried this on a different work station, same thing. Tried this with a different ISO, same thing still wanted me to configure iSCSI. I checked my BIOS and my HDD was listed on both workstations. I did this for Network boot and Offline. I also changed the SATA configs went from IDE, RAID, AHCI. NOTE: When installing Wheezy, I found my HDDs and was able to select guided! Same HDD, Same Workstation. -- *Miles Gargaritano* *IT Analyst* *T: *416-900-3830 ext. 2002 *E**: *[email protected] *W:* uberflip.com
