Package: src:linux Version: 3.16.7-ckt9-3~deb8u1~bpo70+1 Severity: important
Hi, Kernel crashed with NULL pointer into an Oops. Last things I did when I got this triggered: 1) Battery on laptop went very low (critical: red mark) 2) I plugged in power chord 3) Let around 1 minute with power chord in to charge 4) I plugged in via USB my tablet in order to charge its battery 5) Laptop went into stand by mode 6) I waited until it settled into stand by 7) Activated to exit stand by, by pressing the power button 8) It booted back to the login screen (NOTE: 1/3 of the screen was black) 9) TRIGGER: after I typed in my password to login the oops occured Please also check the attached screenshot for the full Oops. Thanks in advance, Alex -- Package-specific info: ** Version: Linux version 3.16.0-0.bpo.4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1~bpo70+1 (2015-04-27) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-0.bpo.4-amd64 root=UUID=206d4688-79d7-45d9-8d1d-f2e8e8674962 ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 12.369331] lis3lv02d: 8 bits 3DC sensor found [ 12.423384] [drm] Memory usable by graphics device = 2048M [ 12.423387] [drm] Replacing VGA console driver [ 12.424486] Console: switching to colour dummy device 80x25 [ 12.424870] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead [ 12.434143] tpm_tis 00:05: TPM is disabled/deactivated (0x7) [ 12.446214] i915 0000:00:02.0: irq 66 for MSI/MSI-X [ 12.446226] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.446228] [drm] Driver supports precise vblank timestamp query. [ 12.446273] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 12.471616] [drm] VBT doesn't support DRRS [ 12.505088] fbcon: inteldrmfb (fb0) is primary device [ 12.514154] ACPI: Battery Slot [BAT0] (battery present) [ 12.514648] wmi: Mapper loaded [ 12.778892] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 12.950498] cfg80211: Calling CRDA to update world regulatory domain [ 13.143984] AVX2 version of gcm_enc/dec engaged. [ 13.145495] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 13.160117] alg: No test for crc32 (crc32-pclmul) [ 13.583585] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin [ 13.583913] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2654, fw id: 1323623 [ 13.594899] Console: switching to colour frame buffer device 200x56 [ 13.597757] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 13.597758] i915 0000:00:02.0: registered panic notifier [ 13.620802] intel_rapl: Found RAPL domain package [ 13.620806] intel_rapl: Found RAPL domain core [ 13.620808] intel_rapl: Found RAPL domain uncore [ 13.620810] intel_rapl: Found RAPL domain dram [ 13.620940] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input12 [ 13.670763] rtl8723be 0000:09:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin [ 13.706954] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15 [ 13.723357] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.725194] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 13.725279] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS [ 13.725456] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 13.725522] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:40/LNXVIDEO:01/input/input17 [ 13.725569] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 13.725998] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X [ 13.733327] snd_hda_intel 0000:00:03.0: irq 68 for MSI/MSI-X [ 13.835116] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 13.839133] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 13.839349] rtlwifi: wireless switch is on [ 13.891296] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 13.891299] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.891301] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 13.891302] sound hdaudioC1D0: mono: mono_out=0x0 [ 13.891303] sound hdaudioC1D0: inputs: [ 13.891304] sound hdaudioC1D0: Mic=0x19 [ 13.891306] sound hdaudioC1D0: Internal Mic=0x12 [ 13.898098] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 13.898150] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 13.898198] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 13.898281] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input22 [ 13.898541] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 13.898601] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24 [ 13.979247] input: HP WMI hotkeys as /devices/virtual/input/input18 [ 14.081939] iTCO_vendor_support: vendor-support=0 [ 14.115480] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.115512] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 14.115640] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.213817] Bluetooth: Core ver 2.19 [ 14.213832] NET: Registered protocol family 31 [ 14.213833] Bluetooth: HCI device and connection manager initialized [ 14.213839] Bluetooth: HCI socket layer initialized [ 14.213841] Bluetooth: L2CAP socket layer initialized [ 14.213852] Bluetooth: SCO socket layer initialized [ 14.305000] usbcore: registered new interface driver btusb [ 14.861954] Adding 4095996k swap on /dev/sda1. Priority:-1 extents:1 across:4095996k FS [ 15.226986] cfg80211: World regulatory domain updated: [ 15.226991] cfg80211: DFS Master region: unset [ 15.226992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 15.226995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.226996] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.226998] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 15.227000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 15.227002] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 15.227003] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 15.227005] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 15.227006] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 25.753197] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 25.974976] systemd-journald[194]: Received request to flush runtime journal from PID 1 [ 34.643627] Bridge firewalling registered [ 34.744999] r8169 0000:08:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw [ 34.757900] r8169 0000:08:00.0 eth0: link down [ 34.757921] r8169 0000:08:00.0 eth0: link down [ 34.757952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.232116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.862066] r8169 0000:08:00.0 eth0: link up [ 36.862074] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.823939] vboxdrv: Found 4 processor cores. [ 40.824070] vboxdrv: fAsync=0 offMin=0x26a offMax=0x1245 [ 40.824129] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 40.824130] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008). [ 41.344451] vboxpci: IOMMU not found (not registered) [ 80.872029] gsettings[2057]: segfault at 20 ip 00007f29608fcec3 sp 00007ffde28b6b98 error 6 in libgio-2.0.so.0.4200.1[7f2960847000+171000] [ 82.478664] traps: variety[1896] trap int3 ip:7f683d759d30 sp:7ffe66529650 error:0 [ 98.913937] device eth0 entered promiscuous mode [ 98.914008] br0: port 1(eth0) entered forwarding state [ 98.914019] br0: port 1(eth0) entered forwarding state [ 113.964351] br0: port 1(eth0) entered forwarding state ** Model information sys_vendor: Hewlett-Packard product_name: HP ProBook 470 G2 product_version: A3008CD10003 chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: M74 Ver. 01.04 board_vendor: Hewlett-Packard board_name: 2249 board_version: KBC Version 67.22 ** Loaded modules: pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bridge stp llc binfmt_misc cpufreq_powersave cpufreq_userspace cpufreq_conservative cpufreq_stats ecb btusb bluetooth iTCO_wdt iTCO_vendor_support 6lowpan_iphc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic arc4 x86_pkg_temp_thermal joydev hp_wmi sparse_keymap intel_powerclamp intel_rapl rtl8723be coretemp kvm_intel kvm btcoexist rtl8723_common crc32_pclmul rtl_pci ghash_clmulni_intel aesni_intel rtlwifi aes_x86_64 mac80211 lrw gf128mul glue_helper ablk_helper cfg80211 cryptd snd_hda_intel snd_hda_controller snd_hda_codec evdev rfkill pcspkr psmouse serio_raw snd_hwdep tpm_infineon rtsx_pci_ms memstick snd_pcm i915 wmi snd_timer drm_kms_helper drm battery hp_accel lpc_ich lis3lv02d input_polldev snd tpm_tis soundcore tpm i2c_algo_bit i2c_core shpchp hp_wireless video ac button mei_me mei processor loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid hid sg sr_mod cdrom sd_mod crc_t10dif crct10dif_generic rtsx_pci_sdmmc mmc_core r8169 mii crct10dif_pclmul crct10dif_common ahci libahci crc32c_intel libata ehci_pci scsi_mod ehci_hcd rtsx_pci mfd_core xhci_hcd usbcore usb_common thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 66 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 8000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 68 Region 0: Memory at d0910000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 61 Region 0: Memory at d0900000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 65 Region 0: Memory at d0919000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 67 Region 0: Memory at d0914000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 Memory behind bridge: d0800000-d08fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00007fff Memory behind bridge: d0700000-d07fffff Prefetchable memory behind bridge: 000000009fb00000-000000009fcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0600000-d06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0500000-d05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5 [8086:9c18] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0400000-d04fffff Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at d091d000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 64 Region 0: I/O ports at 8088 [size=8] Region 1: I/O ports at 8094 [size=4] Region 2: I/O ports at 8080 [size=8] Region 3: I/O ports at 8090 [size=4] Region 4: I/O ports at 8060 [size=32] Region 5: Memory at d091c000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal [8086:9c24] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 0: Memory at d091b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:2249] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 62 Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10) Subsystem: Hewlett-Packard Company Device [103c:2249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 63 Region 0: I/O ports at 5000 [size=256] Region 2: Memory at d0604000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at d0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723] Subsystem: Hewlett-Packard Company Device [103c:2231] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at d0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: rtl8723be 0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz PRO [Radeon R5 M255] [1002:6901] Subsystem: Hewlett-Packard Company Device [103c:224a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at 3000 [size=256] Region 5: Memory at d0400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at d0440000 [disabled] [size=128K] Capabilities: <access denied> ** USB devices: Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 05c8:0359 Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 001 Device 005: ID 138a:003f Validity Sensors, Inc. Bus 001 Device 004: ID 0bda:b001 Realtek Semiconductor Corp. Bus 001 Device 003: ID 8087:0a15 Intel Corp. Bus 001 Device 002: ID 04f3:0235 Elan Microelectronics Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-0.bpo.4-amd64 (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-3.16.0-0.bpo.4-amd64 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools 0.120 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16.0-0.bpo.4-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-3.16.0-0.bpo.4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-22 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-0.bpo.4-amd64 is related to: ii firmware-atheros 0.43 ii firmware-bnx2 0.43 ii firmware-bnx2x 0.43 ii firmware-brcm80211 0.43 ii firmware-intelwimax 0.43 ii firmware-ipw2x00 0.43 ii firmware-ivtv 0.43 ii firmware-iwlwifi 0.43 ii firmware-libertas 0.43 pn firmware-linux <none> ii firmware-linux-nonfree 0.43 ii firmware-myricom 0.43 ii firmware-netxen 0.43 ii firmware-qlogic 0.43 ii firmware-ralink 0.43 ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-0.bpo.4-amd64/postinst/depmod-error-initrd-3.16.0-0.bpo.4-amd64: false linux-image-3.16.0-0.bpo.4-amd64/prerm/removing-running-kernel-3.16.0-0.bpo.4-amd64: true linux-image-3.16.0-0.bpo.4-amd64/postinst/mips-initrd-3.16.0-0.bpo.4-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org