Package: osspd
Version: 1.3.2-6
Some more info:
sudo service osspd status
● osspd.service - OSS Proxy Daemon
Loaded: loaded (/lib/systemd/system/osspd.service; enabled)
Active: active (running) since tor 2015-07-09 01:06:22 CEST; 35min ago
Main PID: 601 (osspd)
CGroup: /system.slice/osspd.service
└─601 /usr/sbin/osspd -f --dsp-slave=/usr/lib/osspd/ossp-slave
jul 09 01:06:22 nuc osspd[601]: osspd: OSS Proxy v1.3.2 (C) 2008-2010 by Tejun
Heo <[email protected]>
jul 09 01:06:22 nuc osspd[601]: osspd: Creating dsp (14:3), adsp (14:12), mixer
(14:0)
----------------------------------------------------------
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-amd64 ([email protected])
(gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0-1-amd64
root=/dev/mapper/nuc--vg-root ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d5916fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5917000-0x00000000d5dfdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d5dfe000-0x00000000da322fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da323000-0x00000000da381fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da382000-0x00000000da3a5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da3a6000-0x00000000dacd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dacd6000-0x00000000daffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /NUC5i3RYB, BIOS
RYBDWi35.86A.0247.2015.0415.1351 04/15/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00D8000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00DA000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 8 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at
[ffff8800000fd830]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21edfffff]
[ 0.000000] [mem 0x200000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd5916fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd57fffff] page 2M
[ 0.000000] [mem 0xd5800000-0xd5916fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd5dfe000-0xda322fff]
[ 0.000000] [mem 0xd5dfe000-0xd5dfffff] page 4k
[ 0.000000] [mem 0xd5e00000-0xda1fffff] page 2M
[ 0.000000] [mem 0xda200000-0xda322fff] page 4k
[ 0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
[ 0.000000] BRK [0x01b15000, 0x01b15fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x360d2000-0x37060fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000DA389088 000094 (v01 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DA39D218 00010C (v05 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DA3891B0 014063 (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DACD4F80 000040
[ 0.000000] ACPI: APIC 0x00000000DA39D328 000084 (v03 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DA39D3B0 000044 (v01 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DA39D3F8 00009C (v01 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DA39D498 00003C (v01 INTEL NUC5i3RY
000000F7 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DA39D4D8 000038 (v01 INTEL NUC5i3RY
000000F7 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DA39D510 000315 (v01 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DA39D828 000042 (v01 INTEL NUC5i3RY
000000F7 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DA39D870 000C7D (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DA39E4F0 0000A0 (v32 INTEL NUC5i3RY
000000F7 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DA39E590 000539 (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA39EAD0 000B74 (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA39F648 005BEF (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000DA3A5238 0000D4 (v01 INTEL NUC5i3RY
000000F7 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21eff9000-0x21effcfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD ->
[ffff880216600000-ffff88021e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d5916fff]
[ 0.000000] node 0: [mem 0x00000000d5dfe000-0x00000000da322fff]
[ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2067929
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13881 pages used for memmap
[ 0.000000] DMA32 zone: 888381 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdc000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low edge lint[0xc0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd5917000-0xd5dfdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda323000-0xda381fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda382000-0xda3a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda3a6000-0xdacd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdacd6000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88021ec00000 s87256 r8192
d31528 u524288
[ 0.000000] pcpu-alloc: s87256 r8192 d31528 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 2035595
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0-1-amd64
root=/dev/mapper/nuc--vg-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard
form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8046448K/8271716K available (5541K kernel code, 1020K
rwdata, 1928K rodata, 1244K init, 832K bss, 225268K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.251 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4190.50 BogoMIPS (lpj=8381004)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20150204
[ 0.019227] ACPI: All ACPI Tables successfully acquired
[ 0.019598] Security Framework initialized
[ 0.019604] AppArmor: AppArmor disabled by boot time parameter
[ 0.019605] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020096] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.021735] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022443] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022453] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.022650] Initializing cgroup subsys blkio
[ 0.022676] Initializing cgroup subsys memory
[ 0.022682] Initializing cgroup subsys devices
[ 0.022684] Initializing cgroup subsys freezer
[ 0.022686] Initializing cgroup subsys net_cls
[ 0.022688] Initializing cgroup subsys perf_event
[ 0.022690] Initializing cgroup subsys net_prio
[ 0.022717] CPU: Physical Processor ID: 0
[ 0.022718] CPU: Processor Core ID: 0
[ 0.022722] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022723] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023783] mce: CPU supports 7 MCE banks
[ 0.023795] CPU0: Thermal monitoring enabled (TM1)
[ 0.023804] process: using mwait in idle threads
[ 0.023806] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023807] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024155] Freeing SMP alternatives memory: 24K (ffffffff81a38000 -
ffffffff81a3e000)
[ 0.025061] ftrace: allocating 22346 entries in 88 pages
[ 0.034130] dmar: Host address width 39
[ 0.034132] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.034141] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 7e1ff0505e
[ 0.034142] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.034146] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462
ecap f010da
[ 0.034148] dmar: RMRR base: 0x000000daefc000 end: 0x000000daf0afff
[ 0.034149] dmar: RMRR base: 0x000000db800000 end: 0x000000dfffffff
[ 0.034150] dmar: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.034152] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.034153] HPET id 0 under DRHD base 0xfed91000
[ 0.034481] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.034493] Enabled IRQ remapping in xapic mode
[ 0.034494] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.035138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074848] TSC deadline timer enabled
[ 0.074851] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam:
06, model: 3d, stepping: 04)
[ 0.074878] Performance Events: PEBS fmt2+, generic architected perfmon,
full-width counters, Intel PMU driver.
[ 0.074883] ... version: 3
[ 0.074884] ... bit width: 48
[ 0.074885] ... generic registers: 4
[ 0.074886] ... value mask: 0000ffffffffffff
[ 0.074887] ... max period: 0000ffffffffffff
[ 0.074887] ... fixed-purpose events: 3
[ 0.074888] ... event mask: 000000070000000f
[ 0.075444] x86: Booting SMP configuration:
[ 0.075445] .... node #0, CPUs: #1
[ 0.089726] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.089802] #2 #3
[ 0.118409] x86: Booted up 1 node, 4 CPUs
[ 0.118412] smpboot: Total of 4 processors activated (16762.00 BogoMIPS)
[ 0.122254] devtmpfs: initialized
[ 0.124772] PM: Registering ACPI NVS region [mem 0xda3a6000-0xdacd5fff]
(9633792 bytes)
[ 0.125095] pinctrl core: initialized pinctrl subsystem
[ 0.125229] NET: Registered protocol family 16
[ 0.134079] cpuidle: using governor ladder
[ 0.146076] cpuidle: using governor menu
[ 0.146126] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.146127] ACPI: bus type PCI registered
[ 0.146129] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.146209] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.146211] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.146288] PCI: Using configuration type 1 for base access
[ 0.146522] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.146522] mtrr: probably your BIOS does not setup all CPUs.
[ 0.146523] mtrr: corrected configuration.
[ 0.158454] ACPI: Added _OSI(Module Device)
[ 0.158456] ACPI: Added _OSI(Processor Device)
[ 0.158457] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.158458] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164081] ACPI: Executed 18 blocks of module-level executable AML code
[ 0.169158] ACPI: Dynamic OEM Table Load:
[ 0.169164] ACPI: SSDT 0xFFFF880214EF7800 0003D3 (v02 PmRef Cpu0Cst
00003001 INTL 20120913)
[ 0.170011] ACPI: Dynamic OEM Table Load:
[ 0.170016] ACPI: SSDT 0xFFFF880214D9B000 0005AA (v02 PmRef ApIst
00003000 INTL 20120913)
[ 0.170940] ACPI: Dynamic OEM Table Load:
[ 0.170943] ACPI: SSDT 0xFFFF88021609BE00 000119 (v02 PmRef ApCst
00003000 INTL 20120913)
[ 0.172551] ACPI: Interpreter enabled
[ 0.172560] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20150204/hwxface-580)
[ 0.172567] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20150204/hwxface-580)
[ 0.172582] ACPI: (supports S0 S3 S4 S5)
[ 0.172583] ACPI: Using IOAPIC for interrupt routing
[ 0.172614] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.174832] ACPI: Power Resource [PG00] (on)
[ 0.175240] ACPI: Power Resource [PG01] (on)
[ 0.175637] ACPI: Power Resource [PG02] (on)
[ 0.186177] ACPI: Power Resource [FN00] (off)
[ 0.186256] ACPI: Power Resource [FN01] (off)
[ 0.186332] ACPI: Power Resource [FN02] (off)
[ 0.186409] ACPI: Power Resource [FN03] (off)
[ 0.186484] ACPI: Power Resource [FN04] (off)
[ 0.187555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.187560] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.187681] \_SB_.PCI0:_OSC invalid UUID
[ 0.187682] _OSC request data:1 1f 0
[ 0.187686] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.188179] PCI host bridge to bus 0000:00
[ 0.188182] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.188183] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.188185] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.188187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.188188] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff
window]
[ 0.188196] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.188297] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.188309] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.188315] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.188320] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.188415] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.188423] pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit]
[ 0.188541] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.188558] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.188617] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.188671] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.188711] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.188731] pci 0000:00:16.0: reg 0x10: [mem 0xf713d000-0xf713d01f 64bit]
[ 0.188800] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.188890] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
[ 0.188906] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.188913] pci 0000:00:19.0: reg 0x14: [mem 0xf713b000-0xf713bfff]
[ 0.188920] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.188976] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.189030] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.189069] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.189086] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.189145] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189196] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.189241] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.189318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.189368] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.189414] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.189493] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.189543] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.189588] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.189607] pci 0000:00:1d.0: reg 0x10: [mem 0xf713a000-0xf713a3ff]
[ 0.189696] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.189752] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.189795] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.189980] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.189994] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.190000] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.190007] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.190013] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.190020] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.190026] pci 0000:00:1f.2: reg 0x24: [mem 0xf7139000-0xf71397ff]
[ 0.190064] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.190142] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.190155] pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit]
[ 0.190173] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.190361] acpiphp: Slot [1] registered
[ 0.190372] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.190741] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.190829] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.191118] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.191206] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.198821] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.198826] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.199813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.199867] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.199919] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.199970] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.200020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.200071] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.200120] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.200171] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.200502] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.200608] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.200610] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.200612] vgaarb: loaded
[ 0.200613] vgaarb: bridge control possible 0000:00:02.0
[ 0.200701] PCI: Using ACPI for IRQ routing
[ 0.201961] PCI: pci_cache_line_size set to 64 bytes
[ 0.202291] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.202293] e820: reserve RAM buffer [mem 0xd5917000-0xd7ffffff]
[ 0.202294] e820: reserve RAM buffer [mem 0xda323000-0xdbffffff]
[ 0.202295] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.202297] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.202426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.202431] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.204459] Switched to clocksource hpet
[ 0.209193] pnp: PnP ACPI init
[ 0.209368] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.209372] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209557] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.209560] system 00:01: [io 0xffff] has been reserved
[ 0.209562] system 00:01: [io 0xffff] has been reserved
[ 0.209564] system 00:01: [io 0xffff] has been reserved
[ 0.209566] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.209568] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.209570] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209625] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.209665] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.209667] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.209861] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.209863] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.209865] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.209867] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.209869] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.209872] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.209874] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.209876] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.209878] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.209880] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.209882] system 00:04: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.209884] system 00:04: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.209886] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210472] system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.210475] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.210477] system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.210479] system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.210481] system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.210483] system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.210486] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210989] pnp: PnP ACPI: found 6 devices
[ 0.217308] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.217321] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.217326] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.217334] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.217336] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.217337] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.217339] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[ 0.217341] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.217392] NET: Registered protocol family 2
[ 0.217573] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.217709] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.217820] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.217837] TCP: reno registered
[ 0.217847] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.217872] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.217932] NET: Registered protocol family 1
[ 0.217946] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.236747] PCI: CLS 64 bytes, default 64
[ 0.236785] Unpacking initramfs...
[ 0.547103] Freeing initrd memory: 15932K (ffff8800360d2000 -
ffff880037061000)
[ 0.547124] dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
[ 0.547133] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.547135] software IO TLB [mem 0xd6323000-0xda323000] (64MB) mapped at
[ffff8800d6323000-ffff8800da322fff]
[ 0.547369] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547376] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547383] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547388] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547440] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 0.547720] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.547749] audit: initializing netlink subsys (disabled)
[ 0.547764] audit: type=2000 audit(1436396780.544:1): initialized
[ 0.548017] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.548034] zpool: loaded
[ 0.548161] VFS: Disk quotas dquot_6.5.2
[ 0.548178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.548572] alg: No test for stdrng (krng)
[ 0.548602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.548646] io scheduler noop registered
[ 0.548650] io scheduler deadline registered
[ 0.548667] io scheduler cfq registered (default)
[ 0.549010] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.549024] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.549043] intel_idle: MWAIT substates: 0x11142120
[ 0.549044] intel_idle: v0.4 model 0x3D
[ 0.549045] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.549310] GHES: HEST is not enabled!
[ 0.549386] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.549809] Linux agpgart interface v0.103
[ 0.549853] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 0.549854] AMD IOMMUv2 functionality not available on this system
[ 0.549912] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.553027] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.553033] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.553157] mousedev: PS/2 mouse device common for all mice
[ 0.553188] rtc_cmos 00:02: RTC can wake from S4
[ 0.553316] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.553343] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 0.553354] Intel P-state driver initializing.
[ 0.553500] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.554709] TCP: cubic registered
[ 0.554823] NET: Registered protocol family 10
[ 0.555287] mip6: Mobile IPv6
[ 0.555300] NET: Registered protocol family 17
[ 0.555317] mpls_gso: MPLS GSO support
[ 0.556124] registered taskstats version 1
[ 0.557338] rtc_cmos 00:02: setting system clock to 2015-07-08 23:06:20 UTC
(1436396780)
[ 0.557528] PM: Hibernation image not present or could not be loaded.
[ 0.558212] Freeing unused kernel memory: 1244K (ffffffff81901000 -
ffffffff81a38000)
[ 0.558216] Write protecting the kernel read-only data: 8192k
[ 0.558813] Freeing unused kernel memory: 592K (ffff88000156c000 -
ffff880001600000)
[ 0.558967] Freeing unused kernel memory: 120K (ffff8800017e2000 -
ffff880001800000)
[ 0.568656] systemd-udevd[74]: starting version 215
[ 0.568913] random: systemd-udevd urandom read with 5 bits of entropy
available
[ 0.578097] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.580464] sdhci: Secure Digital Host Controller Interface driver
[ 0.580468] sdhci: Copyright(c) Pierre Ossman
[ 0.587172] pps_core: LinuxPPS API ver. 1 registered
[ 0.587175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.587545] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.587549] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.587664] PTP clock support registered
[ 0.587702] ACPI: bus type USB registered
[ 0.587738] usbcore: registered new interface driver usbfs
[ 0.587754] usbcore: registered new interface driver hub
[ 0.587776] usbcore: registered new device driver usb
[ 0.587869] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.587872] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.588591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.588966] ehci-pci: EHCI PCI platform driver
[ 0.588973] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.588975] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.589189] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.589199] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 0.589215] ehci-pci 0000:00:1d.0: debug port 2
[ 0.590344] SCSI subsystem initialized
[ 0.593117] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.593164] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf713a000
[ 0.593209] libata version 3.00 loaded.
[ 0.604683] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.604815] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.604818] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.604819] usb usb1: Product: EHCI Host Controller
[ 0.604821] usb usb1: Manufacturer: Linux 4.0.0-1-amd64 ehci_hcd
[ 0.604822] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.604967] hub 1-0:1.0: USB hub found
[ 0.604979] hub 1-0:1.0: 2 ports detected
[ 0.605322] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 0.851991] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.851994] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
b8:ae:ed:71:d1:a7
[ 0.851996] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.852022] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.852186] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.852195] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 0.852285] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x00009810
[ 0.852292] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.852435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.852439] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.852442] usb usb2: Product: xHCI Host Controller
[ 0.852444] usb usb2: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
[ 0.852447] usb usb2: SerialNumber: 0000:00:14.0
[ 0.852617] hub 2-0:1.0: USB hub found
[ 0.852636] hub 2-0:1.0: 11 ports detected
[ 0.855890] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.855894] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 3
[ 0.855923] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.855924] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.855926] usb usb3: Product: xHCI Host Controller
[ 0.855927] usb usb3: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
[ 0.855928] usb usb3: SerialNumber: 0000:00:14.0
[ 0.856054] hub 3-0:1.0: USB hub found
[ 0.856062] hub 3-0:1.0: 4 ports detected
[ 0.857318] ahci 0000:00:1f.2: version 3.0
[ 0.872837] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8
impl SATA mode
[ 0.872840] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum
part deso sadm sds apst
[ 0.873332] scsi host0: ahci
[ 0.873440] scsi host1: ahci
[ 0.873539] scsi host2: ahci
[ 0.873624] scsi host3: ahci
[ 0.873669] ata1: DUMMY
[ 0.873670] ata2: DUMMY
[ 0.873671] ata3: DUMMY
[ 0.873674] ata4: SATA max UDMA/133 abar m2048@0xf7139000 port 0xf7139280
irq 44
[ 0.916845] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.049352] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.049355] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.049632] hub 1-1:1.0: USB hub found
[ 1.049726] hub 1-1:1.0: 8 ports detected
[ 1.165019] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.193021] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.194592] ata4.00: supports DRM functions and may not be fully accessible
[ 1.194880] ata4.00: ATA-9: Samsung SSD 850 EVO M.2 120GB, EMT21B6Q, max
UDMA/133
[ 1.194883] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.195401] ata4.00: supports DRM functions and may not be fully accessible
[ 1.195798] ata4.00: configured for UDMA/133
[ 1.195988] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q
PQ: 0 ANSI: 5
[ 1.197960] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111
GiB)
[ 1.198071] sd 3:0:0:0: [sda] Write Protect is off
[ 1.198074] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.198097] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.198552] sda: sda1 sda2 < sda5 >
[ 1.198853] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.199242] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.219709] device-mapper: uevent: version 1.0.3
[ 1.219787] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised:
[email protected]
[ 1.260416] PM: Starting manual resume from disk
[ 1.260420] PM: Hibernation image partition 254:1 present
[ 1.260421] PM: Looking for hibernation image.
[ 1.260558] PM: Image not found (code -22)
[ 1.260560] PM: Hibernation image not present or could not be loaded.
[ 1.286506] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.295666] usb 2-3: New USB device found, idVendor=046d, idProduct=c52e
[ 1.295671] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.295674] usb 2-3: Product: USB Receiver
[ 1.295676] usb 2-3: Manufacturer: Logitech
[ 1.407825] lp: driver loaded but no devices found
[ 1.413893] ppdev: user-space parallel port driver
[ 1.416914] fuse init (API version 7.23)
[ 1.419973] systemd-udevd[198]: starting version 215
[ 1.461149] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.485694] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.485700] ACPI: Sleep Button [SLPB]
[ 1.485767] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.485770] ACPI: Power Button [PWRB]
[ 1.485828] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.485831] ACPI: Power Button [PWRF]
[ 1.516227] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 1.536501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.542480] [drm] Initialized drm 1.1.0 20060810
[ 1.545171] tsc: Refined TSC clocksource calibration: 2095.149 MHz
[ 1.546245] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.546815] ACPI Warning: SystemIO range
0x000000000000f040-0x000000000000f05f conflicts with OpRegion
0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI)
(20150204/utaddress-258)
[ 1.546823] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 1.581063] cfg80211: Calling CRDA to update world regulatory domain
[ 1.586346] Intel(R) Wireless WiFi driver for Linux
[ 1.586349] Copyright(c) 2003- 2014 Intel Corporation
[ 1.588294] AVX2 version of gcm_enc/dec engaged.
[ 1.588297] AES CTR mode by8 optimization enabled
[ 1.590228] iwlwifi 0000:02:00.0: Unsupported splx structure
[ 1.590612] iwlwifi 0000:02:00.0: firmware: failed to load
iwlwifi-7265D-12.ucode (-2)
[ 1.590674] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-7265D-12.ucode failed with error -2
[ 1.590695] iwlwifi 0000:02:00.0: firmware: failed to load
iwlwifi-7265D-11.ucode (-2)
[ 1.590765] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-7265D-11.ucode failed with error -2
[ 1.591604] usb 2-4: New USB device found, idVendor=0781, idProduct=556b
[ 1.591608] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.591611] usb 2-4: Product: Cruzer Edge
[ 1.591613] usb 2-4: Manufacturer: SanDisk
[ 1.591615] usb 2-4: SerialNumber: 20043110820F4940CE64
[ 1.592301] sound hdaudioC1D0: autoconfig for ALC283: line_outs=1
(0x21/0x0/0x0/0x0/0x0) type:hp
[ 1.592304] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.592306] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.592307] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.592309] sound hdaudioC1D0: inputs:
[ 1.592310] sound hdaudioC1D0: Mic=0x19
[ 1.592673] [drm] Memory usable by graphics device = 4096M
[ 1.592702] [drm] Replacing VGA console driver
[ 1.593389] Console: switching to colour dummy device 80x25
[ 1.594451] iwlwifi 0000:02:00.0: firmware: direct-loading firmware
iwlwifi-7265D-10.ucode
[ 1.595050] iwlwifi 0000:02:00.0: loaded firmware version 23.15.10.0 op_mode
iwlmvm
[ 1.595771] iTCO_vendor_support: vendor-support=0
[ 1.596186] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.596223] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2,
TCOBASE=0x1860)
[ 1.596340] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.599164] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.613615] Adding 4784124k swap on /dev/mapper/nuc--vg-swap_1. Priority:-1
extents:1 across:4784124k SSFS
[ 1.617292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.617295] [drm] Driver supports precise vblank timestamp query.
[ 1.617420] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.630158] alg: No test for crc32 (crc32-pclmul)
[ 1.632538] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC
7265, REV=0x210
[ 1.632877] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1.633327] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1.641831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.642274] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 1.643201] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 1.643207] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 1.651110] cfg80211: World regulatory domain updated:
[ 1.651113] cfg80211: DFS Master region: unset
[ 1.651114] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1.651116] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651118] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651119] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651121] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 1.651123] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 1.651124] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 1.651126] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651127] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 1.664925] fbcon: inteldrmfb (fb0) is primary device
[ 1.668426] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 1.669344] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 1.678600] intel_rapl: Found RAPL domain package
[ 1.678602] intel_rapl: Found RAPL domain core
[ 1.678604] intel_rapl: Found RAPL domain uncore
[ 1.678605] intel_rapl: Found RAPL domain dram
[ 1.726431] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.757310] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 1.768424] Console: switching to colour frame buffer device 240x67
[ 1.773007] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.773009] i915 0000:00:02.0: registered panic notifier
[ 1.790001] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 1.790080] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 1.790157] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 1.795528] random: nonblocking pool is initialized
[ 1.819687] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input7
[ 1.819936] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 1.820028] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 1.886012] usb 2-7: No LPM exit latency info found, disabling LPM.
[ 1.886984] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.886987] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.898169] Bluetooth: Core ver 2.20
[ 1.898187] NET: Registered protocol family 31
[ 1.898189] Bluetooth: HCI device and connection manager initialized
[ 1.898193] Bluetooth: HCI socket layer initialized
[ 1.898196] Bluetooth: L2CAP socket layer initialized
[ 1.898202] Bluetooth: SCO socket layer initialized
[ 1.899347] usbcore: registered new interface driver btusb
[ 1.904531] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 1.904606] scsi host4: usb-storage 2-4:1.0
[ 1.904702] usbcore: registered new interface driver usb-storage
[ 1.907771] usbcore: registered new interface driver usbhid
[ 1.907773] usbhid: USB HID core driver
[ 1.908929] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52E.0001/input/input14
[ 1.915159] Bluetooth: hci0: read Intel version: 370810011003110e09
[ 1.915162] Bluetooth: hci0: Intel device is already patched. patch num: 09
[ 1.961586] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 1.961835] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52E.0002/input/input15
[ 2.017786] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 2.055534] systemd-journald[201]: Received request to flush runtime journal
from PID 1
[ 2.144627] RPC: Registered named UNIX socket transport module.
[ 2.144630] RPC: Registered udp transport module.
[ 2.144631] RPC: Registered tcp transport module.
[ 2.144632] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.147517] FS-Cache: Loaded
[ 2.153799] FS-Cache: Netfs 'nfs' registered for caching
[ 2.160233] Installing knfsd (copyright (C) 1996 [email protected]).
[ 2.191329] cfg80211: Calling CRDA for country: SE
[ 2.195296] cfg80211: Regulatory domain changed to country: SE
[ 2.195300] cfg80211: DFS Master region: ETSI
[ 2.195302] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.195305] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 2.195308] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 2.195310] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 2.195312] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 2.195315] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 2.289866] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.289870] Bluetooth: BNEP filters: protocol multicast
[ 2.289875] Bluetooth: BNEP socket layer initialized
[ 2.545736] Switched to clocksource tsc
[ 2.607563] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 2.608006] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 2.902150] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Edge 1.26
PQ: 0 ANSI: 5
[ 2.902412] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.902663] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72
GiB)
[ 2.902922] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.902926] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.903657] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.906049] sdb: sdb1
[ 2.906942] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.696171] wlan0: authenticate with 40:4a:03:e4:21:60
[ 5.701679] wlan0: send auth to 40:4a:03:e4:21:60 (try 1/3)
[ 5.703634] wlan0: authenticated
[ 5.703778] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 5.703782] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 5.703784] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 5.707335] wlan0: associate with 40:4a:03:e4:21:60 (try 1/3)
[ 5.709907] wlan0: RX AssocResp from 40:4a:03:e4:21:60 (capab=0x431 status=0
aid=1)
[ 5.712584] wlan0: associated
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-amd64 ([email protected])
(gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0-1-amd64
root=/dev/mapper/nuc--vg-root ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d5916fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5917000-0x00000000d5dfdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d5dfe000-0x00000000da322fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da323000-0x00000000da381fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da382000-0x00000000da3a5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da3a6000-0x00000000dacd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dacd6000-0x00000000daffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /NUC5i3RYB, BIOS
RYBDWi35.86A.0247.2015.0415.1351 04/15/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00D8000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00DA000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 8 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at
[ffff8800000fd830]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21edfffff]
[ 0.000000] [mem 0x200000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd5916fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd57fffff] page 2M
[ 0.000000] [mem 0xd5800000-0xd5916fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd5dfe000-0xda322fff]
[ 0.000000] [mem 0xd5dfe000-0xd5dfffff] page 4k
[ 0.000000] [mem 0xd5e00000-0xda1fffff] page 2M
[ 0.000000] [mem 0xda200000-0xda322fff] page 4k
[ 0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
[ 0.000000] BRK [0x01b15000, 0x01b15fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x360d2000-0x37060fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000DA389088 000094 (v01 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DA39D218 00010C (v05 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DA3891B0 014063 (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DACD4F80 000040
[ 0.000000] ACPI: APIC 0x00000000DA39D328 000084 (v03 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DA39D3B0 000044 (v01 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DA39D3F8 00009C (v01 INTEL NUC5i3RY
000000F7 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DA39D498 00003C (v01 INTEL NUC5i3RY
000000F7 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DA39D4D8 000038 (v01 INTEL NUC5i3RY
000000F7 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DA39D510 000315 (v01 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DA39D828 000042 (v01 INTEL NUC5i3RY
000000F7 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DA39D870 000C7D (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DA39E4F0 0000A0 (v32 INTEL NUC5i3RY
000000F7 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DA39E590 000539 (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA39EAD0 000B74 (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA39F648 005BEF (v02 INTEL NUC5i3RY
000000F7 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000DA3A5238 0000D4 (v01 INTEL NUC5i3RY
000000F7 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21eff9000-0x21effcfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD ->
[ffff880216600000-ffff88021e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d5916fff]
[ 0.000000] node 0: [mem 0x00000000d5dfe000-0x00000000da322fff]
[ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2067929
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13881 pages used for memmap
[ 0.000000] DMA32 zone: 888381 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdc000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low edge lint[0xc0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd5917000-0xd5dfdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda323000-0xda381fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda382000-0xda3a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda3a6000-0xdacd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdacd6000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88021ec00000 s87256 r8192
d31528 u524288
[ 0.000000] pcpu-alloc: s87256 r8192 d31528 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 2035595
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0-1-amd64
root=/dev/mapper/nuc--vg-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard
form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8046448K/8271716K available (5541K kernel code, 1020K
rwdata, 1928K rodata, 1244K init, 832K bss, 225268K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.251 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4190.50 BogoMIPS (lpj=8381004)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20150204
[ 0.019227] ACPI: All ACPI Tables successfully acquired
[ 0.019598] Security Framework initialized
[ 0.019604] AppArmor: AppArmor disabled by boot time parameter
[ 0.019605] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020096] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.021735] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022443] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022453] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.022650] Initializing cgroup subsys blkio
[ 0.022676] Initializing cgroup subsys memory
[ 0.022682] Initializing cgroup subsys devices
[ 0.022684] Initializing cgroup subsys freezer
[ 0.022686] Initializing cgroup subsys net_cls
[ 0.022688] Initializing cgroup subsys perf_event
[ 0.022690] Initializing cgroup subsys net_prio
[ 0.022717] CPU: Physical Processor ID: 0
[ 0.022718] CPU: Processor Core ID: 0
[ 0.022722] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022723] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023783] mce: CPU supports 7 MCE banks
[ 0.023795] CPU0: Thermal monitoring enabled (TM1)
[ 0.023804] process: using mwait in idle threads
[ 0.023806] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023807] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024155] Freeing SMP alternatives memory: 24K (ffffffff81a38000 -
ffffffff81a3e000)
[ 0.025061] ftrace: allocating 22346 entries in 88 pages
[ 0.034130] dmar: Host address width 39
[ 0.034132] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.034141] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 7e1ff0505e
[ 0.034142] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.034146] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462
ecap f010da
[ 0.034148] dmar: RMRR base: 0x000000daefc000 end: 0x000000daf0afff
[ 0.034149] dmar: RMRR base: 0x000000db800000 end: 0x000000dfffffff
[ 0.034150] dmar: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.034152] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.034153] HPET id 0 under DRHD base 0xfed91000
[ 0.034481] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.034493] Enabled IRQ remapping in xapic mode
[ 0.034494] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.035138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074848] TSC deadline timer enabled
[ 0.074851] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam:
06, model: 3d, stepping: 04)
[ 0.074878] Performance Events: PEBS fmt2+, generic architected perfmon,
full-width counters, Intel PMU driver.
[ 0.074883] ... version: 3
[ 0.074884] ... bit width: 48
[ 0.074885] ... generic registers: 4
[ 0.074886] ... value mask: 0000ffffffffffff
[ 0.074887] ... max period: 0000ffffffffffff
[ 0.074887] ... fixed-purpose events: 3
[ 0.074888] ... event mask: 000000070000000f
[ 0.075444] x86: Booting SMP configuration:
[ 0.075445] .... node #0, CPUs: #1
[ 0.089726] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.089802] #2 #3
[ 0.118409] x86: Booted up 1 node, 4 CPUs
[ 0.118412] smpboot: Total of 4 processors activated (16762.00 BogoMIPS)
[ 0.122254] devtmpfs: initialized
[ 0.124772] PM: Registering ACPI NVS region [mem 0xda3a6000-0xdacd5fff]
(9633792 bytes)
[ 0.125095] pinctrl core: initialized pinctrl subsystem
[ 0.125229] NET: Registered protocol family 16
[ 0.134079] cpuidle: using governor ladder
[ 0.146076] cpuidle: using governor menu
[ 0.146126] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.146127] ACPI: bus type PCI registered
[ 0.146129] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.146209] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.146211] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.146288] PCI: Using configuration type 1 for base access
[ 0.146522] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.146522] mtrr: probably your BIOS does not setup all CPUs.
[ 0.146523] mtrr: corrected configuration.
[ 0.158454] ACPI: Added _OSI(Module Device)
[ 0.158456] ACPI: Added _OSI(Processor Device)
[ 0.158457] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.158458] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164081] ACPI: Executed 18 blocks of module-level executable AML code
[ 0.169158] ACPI: Dynamic OEM Table Load:
[ 0.169164] ACPI: SSDT 0xFFFF880214EF7800 0003D3 (v02 PmRef Cpu0Cst
00003001 INTL 20120913)
[ 0.170011] ACPI: Dynamic OEM Table Load:
[ 0.170016] ACPI: SSDT 0xFFFF880214D9B000 0005AA (v02 PmRef ApIst
00003000 INTL 20120913)
[ 0.170940] ACPI: Dynamic OEM Table Load:
[ 0.170943] ACPI: SSDT 0xFFFF88021609BE00 000119 (v02 PmRef ApCst
00003000 INTL 20120913)
[ 0.172551] ACPI: Interpreter enabled
[ 0.172560] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20150204/hwxface-580)
[ 0.172567] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20150204/hwxface-580)
[ 0.172582] ACPI: (supports S0 S3 S4 S5)
[ 0.172583] ACPI: Using IOAPIC for interrupt routing
[ 0.172614] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.174832] ACPI: Power Resource [PG00] (on)
[ 0.175240] ACPI: Power Resource [PG01] (on)
[ 0.175637] ACPI: Power Resource [PG02] (on)
[ 0.186177] ACPI: Power Resource [FN00] (off)
[ 0.186256] ACPI: Power Resource [FN01] (off)
[ 0.186332] ACPI: Power Resource [FN02] (off)
[ 0.186409] ACPI: Power Resource [FN03] (off)
[ 0.186484] ACPI: Power Resource [FN04] (off)
[ 0.187555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.187560] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.187681] \_SB_.PCI0:_OSC invalid UUID
[ 0.187682] _OSC request data:1 1f 0
[ 0.187686] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.188179] PCI host bridge to bus 0000:00
[ 0.188182] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.188183] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.188185] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.188187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.188188] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff
window]
[ 0.188196] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.188297] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.188309] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.188315] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.188320] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.188415] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.188423] pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit]
[ 0.188541] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.188558] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.188617] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.188671] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.188711] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.188731] pci 0000:00:16.0: reg 0x10: [mem 0xf713d000-0xf713d01f 64bit]
[ 0.188800] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.188890] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
[ 0.188906] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.188913] pci 0000:00:19.0: reg 0x14: [mem 0xf713b000-0xf713bfff]
[ 0.188920] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.188976] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.189030] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.189069] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.189086] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.189145] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189196] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.189241] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.189318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.189368] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.189414] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.189493] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.189543] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.189588] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.189607] pci 0000:00:1d.0: reg 0x10: [mem 0xf713a000-0xf713a3ff]
[ 0.189696] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.189752] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.189795] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.189980] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.189994] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.190000] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.190007] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.190013] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.190020] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.190026] pci 0000:00:1f.2: reg 0x24: [mem 0xf7139000-0xf71397ff]
[ 0.190064] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.190142] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.190155] pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit]
[ 0.190173] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.190361] acpiphp: Slot [1] registered
[ 0.190372] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.190741] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.190829] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.191118] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.191206] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.198821] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.198826] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.199813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.199867] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.199919] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.199970] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.200020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.200071] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.200120] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.200171] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.200502] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.200608] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.200610] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.200612] vgaarb: loaded
[ 0.200613] vgaarb: bridge control possible 0000:00:02.0
[ 0.200701] PCI: Using ACPI for IRQ routing
[ 0.201961] PCI: pci_cache_line_size set to 64 bytes
[ 0.202291] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.202293] e820: reserve RAM buffer [mem 0xd5917000-0xd7ffffff]
[ 0.202294] e820: reserve RAM buffer [mem 0xda323000-0xdbffffff]
[ 0.202295] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.202297] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.202426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.202431] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.204459] Switched to clocksource hpet
[ 0.209193] pnp: PnP ACPI init
[ 0.209368] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.209372] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209557] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.209560] system 00:01: [io 0xffff] has been reserved
[ 0.209562] system 00:01: [io 0xffff] has been reserved
[ 0.209564] system 00:01: [io 0xffff] has been reserved
[ 0.209566] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.209568] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.209570] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209625] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.209665] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.209667] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.209861] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.209863] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.209865] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.209867] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.209869] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.209872] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.209874] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.209876] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.209878] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.209880] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.209882] system 00:04: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.209884] system 00:04: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.209886] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210472] system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.210475] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.210477] system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.210479] system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.210481] system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.210483] system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.210486] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210989] pnp: PnP ACPI: found 6 devices
[ 0.217308] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.217321] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.217326] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.217334] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.217336] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.217337] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.217339] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[ 0.217341] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.217392] NET: Registered protocol family 2
[ 0.217573] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.217709] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.217820] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.217837] TCP: reno registered
[ 0.217847] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.217872] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.217932] NET: Registered protocol family 1
[ 0.217946] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.236747] PCI: CLS 64 bytes, default 64
[ 0.236785] Unpacking initramfs...
[ 0.547103] Freeing initrd memory: 15932K (ffff8800360d2000 -
ffff880037061000)
[ 0.547124] dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
[ 0.547133] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.547135] software IO TLB [mem 0xd6323000-0xda323000] (64MB) mapped at
[ffff8800d6323000-ffff8800da322fff]
[ 0.547369] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547376] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547383] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547388] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.547440] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 0.547720] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.547749] audit: initializing netlink subsys (disabled)
[ 0.547764] audit: type=2000 audit(1436396780.544:1): initialized
[ 0.548017] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.548034] zpool: loaded
[ 0.548161] VFS: Disk quotas dquot_6.5.2
[ 0.548178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.548572] alg: No test for stdrng (krng)
[ 0.548602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.548646] io scheduler noop registered
[ 0.548650] io scheduler deadline registered
[ 0.548667] io scheduler cfq registered (default)
[ 0.549010] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.549024] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.549043] intel_idle: MWAIT substates: 0x11142120
[ 0.549044] intel_idle: v0.4 model 0x3D
[ 0.549045] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.549310] GHES: HEST is not enabled!
[ 0.549386] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.549809] Linux agpgart interface v0.103
[ 0.549853] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 0.549854] AMD IOMMUv2 functionality not available on this system
[ 0.549912] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.553027] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.553033] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.553157] mousedev: PS/2 mouse device common for all mice
[ 0.553188] rtc_cmos 00:02: RTC can wake from S4
[ 0.553316] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.553343] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 0.553354] Intel P-state driver initializing.
[ 0.553500] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.554709] TCP: cubic registered
[ 0.554823] NET: Registered protocol family 10
[ 0.555287] mip6: Mobile IPv6
[ 0.555300] NET: Registered protocol family 17
[ 0.555317] mpls_gso: MPLS GSO support
[ 0.556124] registered taskstats version 1
[ 0.557338] rtc_cmos 00:02: setting system clock to 2015-07-08 23:06:20 UTC
(1436396780)
[ 0.557528] PM: Hibernation image not present or could not be loaded.
[ 0.558212] Freeing unused kernel memory: 1244K (ffffffff81901000 -
ffffffff81a38000)
[ 0.558216] Write protecting the kernel read-only data: 8192k
[ 0.558813] Freeing unused kernel memory: 592K (ffff88000156c000 -
ffff880001600000)
[ 0.558967] Freeing unused kernel memory: 120K (ffff8800017e2000 -
ffff880001800000)
[ 0.568656] systemd-udevd[74]: starting version 215
[ 0.568913] random: systemd-udevd urandom read with 5 bits of entropy
available
[ 0.578097] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.580464] sdhci: Secure Digital Host Controller Interface driver
[ 0.580468] sdhci: Copyright(c) Pierre Ossman
[ 0.587172] pps_core: LinuxPPS API ver. 1 registered
[ 0.587175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.587545] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.587549] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.587664] PTP clock support registered
[ 0.587702] ACPI: bus type USB registered
[ 0.587738] usbcore: registered new interface driver usbfs
[ 0.587754] usbcore: registered new interface driver hub
[ 0.587776] usbcore: registered new device driver usb
[ 0.587869] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.587872] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.588591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.588966] ehci-pci: EHCI PCI platform driver
[ 0.588973] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.588975] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.589189] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.589199] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 0.589215] ehci-pci 0000:00:1d.0: debug port 2
[ 0.590344] SCSI subsystem initialized
[ 0.593117] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.593164] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf713a000
[ 0.593209] libata version 3.00 loaded.
[ 0.604683] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.604815] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.604818] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.604819] usb usb1: Product: EHCI Host Controller
[ 0.604821] usb usb1: Manufacturer: Linux 4.0.0-1-amd64 ehci_hcd
[ 0.604822] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.604967] hub 1-0:1.0: USB hub found
[ 0.604979] hub 1-0:1.0: 2 ports detected
[ 0.605322] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 0.851991] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.851994] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
b8:ae:ed:71:d1:a7
[ 0.851996] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.852022] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.852186] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.852195] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 0.852285] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x00009810
[ 0.852292] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.852435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.852439] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.852442] usb usb2: Product: xHCI Host Controller
[ 0.852444] usb usb2: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
[ 0.852447] usb usb2: SerialNumber: 0000:00:14.0
[ 0.852617] hub 2-0:1.0: USB hub found
[ 0.852636] hub 2-0:1.0: 11 ports detected
[ 0.855890] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.855894] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 3
[ 0.855923] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.855924] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.855926] usb usb3: Product: xHCI Host Controller
[ 0.855927] usb usb3: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
[ 0.855928] usb usb3: SerialNumber: 0000:00:14.0
[ 0.856054] hub 3-0:1.0: USB hub found
[ 0.856062] hub 3-0:1.0: 4 ports detected
[ 0.857318] ahci 0000:00:1f.2: version 3.0
[ 0.872837] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8
impl SATA mode
[ 0.872840] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum
part deso sadm sds apst
[ 0.873332] scsi host0: ahci
[ 0.873440] scsi host1: ahci
[ 0.873539] scsi host2: ahci
[ 0.873624] scsi host3: ahci
[ 0.873669] ata1: DUMMY
[ 0.873670] ata2: DUMMY
[ 0.873671] ata3: DUMMY
[ 0.873674] ata4: SATA max UDMA/133 abar m2048@0xf7139000 port 0xf7139280
irq 44
[ 0.916845] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.049352] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.049355] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.049632] hub 1-1:1.0: USB hub found
[ 1.049726] hub 1-1:1.0: 8 ports detected
[ 1.165019] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.193021] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.194592] ata4.00: supports DRM functions and may not be fully accessible
[ 1.194880] ata4.00: ATA-9: Samsung SSD 850 EVO M.2 120GB, EMT21B6Q, max
UDMA/133
[ 1.194883] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.195401] ata4.00: supports DRM functions and may not be fully accessible
[ 1.195798] ata4.00: configured for UDMA/133
[ 1.195988] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q
PQ: 0 ANSI: 5
[ 1.197960] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111
GiB)
[ 1.198071] sd 3:0:0:0: [sda] Write Protect is off
[ 1.198074] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.198097] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.198552] sda: sda1 sda2 < sda5 >
[ 1.198853] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.199242] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.219709] device-mapper: uevent: version 1.0.3
[ 1.219787] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised:
[email protected]
[ 1.260416] PM: Starting manual resume from disk
[ 1.260420] PM: Hibernation image partition 254:1 present
[ 1.260421] PM: Looking for hibernation image.
[ 1.260558] PM: Image not found (code -22)
[ 1.260560] PM: Hibernation image not present or could not be loaded.
[ 1.286506] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.295666] usb 2-3: New USB device found, idVendor=046d, idProduct=c52e
[ 1.295671] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.295674] usb 2-3: Product: USB Receiver
[ 1.295676] usb 2-3: Manufacturer: Logitech
[ 1.407825] lp: driver loaded but no devices found
[ 1.413893] ppdev: user-space parallel port driver
[ 1.416914] fuse init (API version 7.23)
[ 1.419973] systemd-udevd[198]: starting version 215
[ 1.461149] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.485694] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.485700] ACPI: Sleep Button [SLPB]
[ 1.485767] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.485770] ACPI: Power Button [PWRB]
[ 1.485828] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.485831] ACPI: Power Button [PWRF]
[ 1.516227] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 1.536501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.542480] [drm] Initialized drm 1.1.0 20060810
[ 1.545171] tsc: Refined TSC clocksource calibration: 2095.149 MHz
[ 1.546245] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.546815] ACPI Warning: SystemIO range
0x000000000000f040-0x000000000000f05f conflicts with OpRegion
0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI)
(20150204/utaddress-258)
[ 1.546823] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 1.581063] cfg80211: Calling CRDA to update world regulatory domain
[ 1.586346] Intel(R) Wireless WiFi driver for Linux
[ 1.586349] Copyright(c) 2003- 2014 Intel Corporation
[ 1.588294] AVX2 version of gcm_enc/dec engaged.
[ 1.588297] AES CTR mode by8 optimization enabled
[ 1.590228] iwlwifi 0000:02:00.0: Unsupported splx structure
[ 1.590612] iwlwifi 0000:02:00.0: firmware: failed to load
iwlwifi-7265D-12.ucode (-2)
[ 1.590674] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-7265D-12.ucode failed with error -2
[ 1.590695] iwlwifi 0000:02:00.0: firmware: failed to load
iwlwifi-7265D-11.ucode (-2)
[ 1.590765] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-7265D-11.ucode failed with error -2
[ 1.591604] usb 2-4: New USB device found, idVendor=0781, idProduct=556b
[ 1.591608] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.591611] usb 2-4: Product: Cruzer Edge
[ 1.591613] usb 2-4: Manufacturer: SanDisk
[ 1.591615] usb 2-4: SerialNumber: 20043110820F4940CE64
[ 1.592301] sound hdaudioC1D0: autoconfig for ALC283: line_outs=1
(0x21/0x0/0x0/0x0/0x0) type:hp
[ 1.592304] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.592306] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.592307] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.592309] sound hdaudioC1D0: inputs:
[ 1.592310] sound hdaudioC1D0: Mic=0x19
[ 1.592673] [drm] Memory usable by graphics device = 4096M
[ 1.592702] [drm] Replacing VGA console driver
[ 1.593389] Console: switching to colour dummy device 80x25
[ 1.594451] iwlwifi 0000:02:00.0: firmware: direct-loading firmware
iwlwifi-7265D-10.ucode
[ 1.595050] iwlwifi 0000:02:00.0: loaded firmware version 23.15.10.0 op_mode
iwlmvm
[ 1.595771] iTCO_vendor_support: vendor-support=0
[ 1.596186] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.596223] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2,
TCOBASE=0x1860)
[ 1.596340] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.599164] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.613615] Adding 4784124k swap on /dev/mapper/nuc--vg-swap_1. Priority:-1
extents:1 across:4784124k SSFS
[ 1.617292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.617295] [drm] Driver supports precise vblank timestamp query.
[ 1.617420] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.630158] alg: No test for crc32 (crc32-pclmul)
[ 1.632538] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC
7265, REV=0x210
[ 1.632877] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1.633327] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 1.641831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.642274] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 1.643201] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 1.643207] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 1.651110] cfg80211: World regulatory domain updated:
[ 1.651113] cfg80211: DFS Master region: unset
[ 1.651114] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1.651116] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651118] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651119] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651121] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 1.651123] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 1.651124] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 1.651126] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 1.651127] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 1.664925] fbcon: inteldrmfb (fb0) is primary device
[ 1.668426] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 1.669344] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 1.678600] intel_rapl: Found RAPL domain package
[ 1.678602] intel_rapl: Found RAPL domain core
[ 1.678604] intel_rapl: Found RAPL domain uncore
[ 1.678605] intel_rapl: Found RAPL domain dram
[ 1.726431] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.757310] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 1.768424] Console: switching to colour frame buffer device 240x67
[ 1.773007] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.773009] i915 0000:00:02.0: registered panic notifier
[ 1.790001] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 1.790080] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 1.790157] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 1.795528] random: nonblocking pool is initialized
[ 1.819687] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input7
[ 1.819936] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 1.820028] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 1.886012] usb 2-7: No LPM exit latency info found, disabling LPM.
[ 1.886984] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.886987] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.898169] Bluetooth: Core ver 2.20
[ 1.898187] NET: Registered protocol family 31
[ 1.898189] Bluetooth: HCI device and connection manager initialized
[ 1.898193] Bluetooth: HCI socket layer initialized
[ 1.898196] Bluetooth: L2CAP socket layer initialized
[ 1.898202] Bluetooth: SCO socket layer initialized
[ 1.899347] usbcore: registered new interface driver btusb
[ 1.904531] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 1.904606] scsi host4: usb-storage 2-4:1.0
[ 1.904702] usbcore: registered new interface driver usb-storage
[ 1.907771] usbcore: registered new interface driver usbhid
[ 1.907773] usbhid: USB HID core driver
[ 1.908929] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52E.0001/input/input14
[ 1.915159] Bluetooth: hci0: read Intel version: 370810011003110e09
[ 1.915162] Bluetooth: hci0: Intel device is already patched. patch num: 09
[ 1.961586] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 1.961835] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52E.0002/input/input15
[ 2.017786] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 2.055534] systemd-journald[201]: Received request to flush runtime journal
from PID 1
[ 2.144627] RPC: Registered named UNIX socket transport module.
[ 2.144630] RPC: Registered udp transport module.
[ 2.144631] RPC: Registered tcp transport module.
[ 2.144632] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.147517] FS-Cache: Loaded
[ 2.153799] FS-Cache: Netfs 'nfs' registered for caching
[ 2.160233] Installing knfsd (copyright (C) 1996 [email protected]).
[ 2.191329] cfg80211: Calling CRDA for country: SE
[ 2.195296] cfg80211: Regulatory domain changed to country: SE
[ 2.195300] cfg80211: DFS Master region: ETSI
[ 2.195302] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.195305] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 2.195308] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 2.195310] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 2.195312] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 2.195315] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 2.289866] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.289870] Bluetooth: BNEP filters: protocol multicast
[ 2.289875] Bluetooth: BNEP socket layer initialized
[ 2.545736] Switched to clocksource tsc
[ 2.607563] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 2.608006] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 2.902150] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Edge 1.26
PQ: 0 ANSI: 5
[ 2.902412] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.902663] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72
GiB)
[ 2.902922] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.902926] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.903657] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.906049] sdb: sdb1
[ 2.906942] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.696171] wlan0: authenticate with 40:4a:03:e4:21:60
[ 5.701679] wlan0: send auth to 40:4a:03:e4:21:60 (try 1/3)
[ 5.703634] wlan0: authenticated
[ 5.703778] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 5.703782] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 5.703784] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 5.707335] wlan0: associate with 40:4a:03:e4:21:60 (try 1/3)
[ 5.709907] wlan0: RX AssocResp from 40:4a:03:e4:21:60 (capab=0x431 status=0
aid=1)
[ 5.712584] wlan0: associated
--
Patrik Wallander <[email protected]>
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
