Package: dar
Version: 2.5.2-1+b1
Severity: normal
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
When creating an archive with -zxz, dar exits immediately after
printing:
# dar -v -c srv-build -s 200M -zxz --hash sha512 -R srv-build-from-obnam
Arguments read from /etc/darrc :
At least one slice of an old archive with the same name remains in the
directory /media/sam/backup. It is advised to remove all the old
archive's slices before creating an archive of same name. Can I remove
these old slices? [return = YES | Esc = NO]
Continuing...
Removing file /media/sam/backup/srv-build.1.dar
Creating low layer: Writing archive into a sar object (Segmentation and
Reassembly) for slicing...
srv-build.1.dar is about to be overwritten. [return = YES | Esc = NO]
Continuing...
Writing down the archive header...
Adding a new layer on top: Caching layer for better performances...
Adding a new layer on top: Escape layer to allow sequential reading...
Adding a new layer on top: compression...
# ls -l srv-build.*
-rw-r--r-- 1 root root 67 Dec 8 03:30 srv-build.1.dar
-rw-r--r-- 1 root root 0 Dec 8 03:30 srv-build.1.dar.sha512
# dar -l srv-build
Error met while opening the last slice: Data corruption met at end of
slice, unknown flag found. Trying to open the archive using the first
slice...
Final memory cleanup...
FATAL error, aborting operation
Data corruption met at end of slice, unknown flag found
Plain old -z works fine.
- -- System Information:
Debian Release: 8.2
APT prefers stable-updates
APT policy: (550, 'stable-updates'), (550, 'stable'), (540, 'testing'), (530,
'unstable'), (520, 'experimental'), (500, 'testing-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 4.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages dar depends on:
ii libassuan0 2.4.0-1
ii libattr1 1:2.4.47-2
ii libbz2-1.0 1.0.6-7+b3
ii libc6 2.21-3
ii libdar64-5000 2.5.2-1+b1
ii libgcc1 1:4.9.2-10
ii libgcrypt20 1.6.3-2
ii libgpg-error0 1.17-3
ii libgpgme11 1.5.1-6
ii liblzo2-2 2.08-1.2
ii libstdc++6 5.2.1-23
ii zlib1g 1:1.2.8.dfsg-2+b1
dar recommends no packages.
Versions of packages dar suggests:
pn dar-docs <none>
pn par2 <none>
- -- no debconf information
-----BEGIN PGP SIGNATURE-----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=I+ul
-----END PGP SIGNATURE-----
