2005/12/30, Kurt Roeckx <[EMAIL PROTECTED]>:
Package: nut
Version: 2.0.1-3
Severity: important
Hi,
I have an MGE ellipse 1200 and I've connected it serialy.
It seems that the data is about always stale.
My /etc/nut/ups.conf:
[myups]
driver = mge-shut
port = /dev/ttyS0
upsc shows those:
driver.name: mge-shut
driver.parameter.port: /dev/ttyS0
driver.version: 2.0.1
driver.version.internal: 0.60
[...]
ups.mfr: MGE UPS SYSTEMS
ups.model: ellipse 1200
From the daemon.log file:
Dec 30 19:50:55 intrepid upsd[2073]: UPS [myups] data is no longer stale
Dec 30 19:51:11 intrepid upsd[2073]: Data for UPS [myups] is stale - check driver
Dec 30 19:56:14 intrepid upsd[2073]: UPS [myups] data is no longer stale
Dec 30 19:56:30 intrepid upsd[2073]: Data for UPS [myups] is stale - check driver
Dec 30 20:01:34 intrepid upsd[2073]: UPS [myups] data is no longer stale
Dec 30 20:01:50 intrepid upsd[2073]: Data for UPS [myups] is stale - check driver
Dec 30 20:06:53 intrepid upsd[2073]: UPS [myups] data is no longer stale
Dec 30 20:07:09 intrepid upsd[2073]: Data for UPS [myups] is stale - check driver
It's doing this about every 5 minutes. It's more stale
than not. I don't think setting maxage higher is going to
solve anything since the data is stale for 5 minutes. And
about 15 seconds later it's stale again.
can you give 2.0.2 a try. As I mentionned in this mail [1], I've made some test without any problem... Note that the packages from the MGE repository [2] should do the trick. Note that I've used the standard parameters, not modifying pollinterval, MAXAGE, DEADTIME...
Best regards,
Arnaud
--
[1] http://lists.alioth.debian.org/pipermail/nut-upsuser/2006-January/000616.html
check the last ยง
[2] deb http://opensource.mgeups.com/debian binary/
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/
