Package: arandr
Version: 0.1.9-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
Connect a projector via HDMI, projector still not powered on
* What exactly did you do (or not do) that was effective (or
ineffective)?
Started arandr, pushed Apply button
* What was the outcome of this action?
Error message:
XRandR failed:
XRandR returned error code 1: xrandr: cannot find mode None
* What outcome did you expect instead?
No error message, but no changes either.
I also tried to save a profile without powering on the device, getting
following exception:
File "/usr/lib/python2.7/dist-packages/screenlayout/gui.py", line 64, in
wrapper
return function(*args_out)
File "/usr/lib/python2.7/dist-packages/screenlayout/gui.py", line 249, in
do_save_as
self.widget.save_to_file(f, self.filetemplate)
File "/usr/lib/python2.7/dist-packages/screenlayout/widget.py", line 114, in
save_to_file
self.load_from_file(file)
File "/usr/lib/python2.7/dist-packages/screenlayout/widget.py", line 88, in
load_from_file
template = self._xrandr.load_from_string(data)
File "/usr/lib/python2.7/dist-packages/screenlayout/xrandr.py", line 87, in
load_from_string
self._load_from_commandlineargs(lines[xrandrlines[0]].strip())
File "/usr/lib/python2.7/dist-packages/screenlayout/xrandr.py", line 121, in
_load_from_commandlineargs
raise FileLoadError("Not a known mode: %s"%p[1])
screenlayout.auxiliary.FileLoadError: Not a known mode: None
FYI, xrandr verbose output attached:
Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 16384 x 16384
LVDS connected primary 1366x768+0+0 (0x55) normal (normal left inverted right x
axis y axis) 256mm x 144mm
Identifier: 0x51
Timestamp: 31002557
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000dae181100000000
1d150103801a0e780a69659657528f27
22505400000001010101010101010101
010101010101bc1b568650001430291b
3400009010000018000000fe004e3131
364247452d4c33320a20000000fe0043
4d4e0a202020202020202020000000fe
004e3131364247452d4c33320a200038
scaling mode: Full
supported: None, Full, Center, Full aspect
1366x768 (0x55) 71.000MHz -HSync -VSync *current +preferred
h: width 1366 start 1407 end 1434 total 1500 skew 0 clock 47.33KHz
v: height 768 start 771 end 775 total 788 clock 60.07Hz
1280x720 (0x56) 74.500MHz -HSync +VSync
h: width 1280 start 1344 end 1472 total 1664 skew 0 clock 44.77KHz
v: height 720 start 723 end 728 total 748 clock 59.86Hz
1152x768 (0x57) 71.750MHz -HSync +VSync
h: width 1152 start 1216 end 1328 total 1504 skew 0 clock 47.71KHz
v: height 768 start 771 end 781 total 798 clock 59.78Hz
1024x768 (0x58) 63.500MHz -HSync +VSync
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.82KHz
v: height 768 start 771 end 775 total 798 clock 59.92Hz
800x600 (0x59) 38.250MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.35KHz
v: height 600 start 603 end 607 total 624 clock 59.86Hz
848x480 (0x5a) 31.500MHz -HSync +VSync
h: width 848 start 872 end 952 total 1056 skew 0 clock 29.83KHz
v: height 480 start 483 end 493 total 500 clock 59.66Hz
720x480 (0x5b) 26.750MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 29.85KHz
v: height 480 start 483 end 493 total 500 clock 59.71Hz
640x480 (0x5c) 23.750MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock 29.69KHz
v: height 480 start 483 end 487 total 500 clock 59.38Hz
HDMI-0 disconnected 1920x1080+1366+0 (0x4cb) normal (normal left inverted right
x axis y axis) 0mm x 0mm
Identifier: 0x52
Timestamp: 31002557
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
output_csc: bypass
supported: bypass, tvrgb, ycbcr601, ycbcr709
audio: auto
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
dither: off
supported: off, on
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
coherent: 1
range: (0, 1)
VGA-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x53
Timestamp: 31002557
Subpixel: no subpixels
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
output_csc: bypass
supported: bypass, tvrgb, ycbcr601, ycbcr709
scaling mode: None
supported: None, Full, Center, Full aspect
load detection: 1
range: (0, 1)
1920x1080 (0x4cb) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
MfG,
Eduard.
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.4.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages arandr depends on:
ii python 2.7.11-1
ii python-gtk2 2.24.0-4
ii x11-xserver-utils 7.7+7
arandr recommends no packages.
arandr suggests no packages.
-- no debconf information
