Package: src:linux
Version: 4.1.6-1
Severity: minor

Dear Maintainer,

$ cat /proc/version 
Linux version 4.1.0-2-686-pae (debian-ker...@lists.debian.org) (gcc version 
4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)

>From this is unclear whether my Linux version is 4.1.0 or 4.1.6.

Please change this message to be more clear.

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
   * What was the outcome of this action?
   * What outcome did you expect instead?

*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 4.1.0-2-686-pae (debian-ker...@lists.debian.org) (gcc version 
4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-2-686-pae 
root=UUID=54902130-d49b-4173-bb4f-5eacb0595474 ro selinux=1 security=selinux 
quiet

** Not tainted

** Kernel log:
[31034.375397] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[31518.427577] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[33066.805693] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[34266.687991] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[36140.230214] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[36570.151295] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[36693.418448] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[37151.422586] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[37642.704785] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[38249.014819] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[38394.332586] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[40575.172769] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[41231.592303] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[41781.792279] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[41989.220229] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[43192.855604] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[43574.685787] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[46238.408797] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[47343.823884] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[48533.427944] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[49298.097807] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[50473.718467] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[50795.128879] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[52643.539860] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[54768.755332] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[55332.141717] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[56289.194742] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[59067.560932] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[59166.758744] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[59280.000008] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[59822.184868] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[60248.096370] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[60976.655962] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[61635.078210] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[61702.179371] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[61733.242544] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[63050.455686] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[63149.669395] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[64156.860094] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[65692.644539] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[66449.287196] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[66776.998194] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[67848.333823] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[68318.350437] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[68365.451893] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[68774.816243] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[68882.041087] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[69738.882858] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[70331.177209] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[70947.235166] perf interrupt took too long (2505 > 2500), lowering 
kernel.perf_event_max_sample_rate to 50000
[71253.578065] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[73335.047973] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[73600.604688] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[73703.823978] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[73843.125422] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[75044.685509] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[77641.286592] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[78007.062494] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[79130.462288] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[79237.695150] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[79677.638118] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[80207.794244] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[81027.383619] usb 1-1-port3: disabled by hub (EMI?), re-enabling...
[81027.383627] usb 1-1.3: USB disconnect, device number 3
[81027.700511] usb 1-1.3: new low-speed USB device number 6 using ehci-pci
[81027.799079] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0016
[81027.799084] usb 1-1.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[81027.799087] usb 1-1.3: Product: USB Keyboard
[81027.799089] usb 1-1.3: Manufacturer: SIGMACHIP
[81027.802867] input: SIGMACHIP USB Keyboard as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0016.0005/input/input20
[81027.857198] hid-generic 0003:1C4F:0016.0005: input,hidraw0: USB HID v1.10 
Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[81037.870894] hid-generic 0003:1C4F:0016.0006: usb_submit_urb(ctrl) failed: -1
[81037.870917] hid-generic 0003:1C4F:0016.0006: timeout initializing reports
[81037.871198] input: SIGMACHIP USB Keyboard as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0016.0006/input/input21
[81037.927115] hid-generic 0003:1C4F:0016.0006: input,hidraw1: USB HID v1.10 
Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input1
[82006.155659] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[82778.331916] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[85386.467606] show_signal_msg: 186 callbacks suppressed
[85386.467620] xneur[2255]: segfault at 0 ip b6ee8406 sp bf9126d4 error 4 in 
libc-2.22.so[b6e68000+1b1000]
[85628.822319] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[85796.166784] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[86169.977946] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[87554.372495] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[87715.712419] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[88007.329284] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[88341.052888] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[89019.535044] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[89042.579047] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[89885.393382] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[90699.051118] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[90912.515533] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[91031.769109] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[91106.921474] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[92482.499841] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[92523.584869] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[93817.241552] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[94239.155481] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[94256.187037] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[94345.374845] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110
[94649.020666] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 
rq 9 len 8 ret -110

** Model information
not available

** Loaded modules:
fuse
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
snd_hda_codec_hdmi
binfmt_misc
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
kvm_intel
kvm
snd_hda_codec_realtek
snd_hda_codec_generic
crc32_pclmul
nouveau
iTCO_wdt
iTCO_vendor_support
mxm_wmi
aesni_intel
wmi
video
aes_i586
ttm
drm_kms_helper
gspca_t613
xts
lrw
gspca_main
drm
gf128mul
snd_hda_intel
videodev
ablk_helper
media
lpc_ich
evdev
joydev
cryptd
pcspkr
serio_raw
i2c_algo_bit
snd_hda_controller
mfd_core
snd_hda_codec
sg
i2c_i801
snd_hda_core
snd_hwdep
snd_pcm_oss
snd_mixer_oss
shpchp
snd_pcm
snd_timer
snd
soundcore
mei_me
mei
8250_fintek
processor
button
thermal_sys
coretemp
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
hid_generic
usbhid
hid
ahci
libahci
xhci_pci
crc32c_intel
ehci_pci
libata
xhci_hcd
firewire_ohci
ehci_hcd
scsi_mod
usbcore
firewire_core
r8169
crc_itu_t
mii
usb_common
floppy

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor 
Family DRAM Controller [8086:0100] (rev 09)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: snb_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core 
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: f9000000-faffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series 
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
        Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset 
Family MEI Controller [1458:1c3a]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 35
        Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller [1458:5006]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset 
Family High Definition Audio Controller [8086:1c20] (rev 04)
        Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset 
Family High Definition Audio Controller [1458:a102]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 36
        Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: cf800000-cf9fffff
        Prefetchable memory behind bridge: 00000000cfa00000-00000000cfbfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin B routed to IRQ 17
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin C routed to IRQ 18
        Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
        Memory behind bridge: fbd00000-fbdfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin D routed to IRQ 19
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        Memory behind bridge: fbc00000-fbcfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller [1458:5006]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC 
Controller [8086:1c4a] (rev 04)
        Subsystem: Gigabyte Technology Co., Ltd H67 Express Chipset Family LPC 
Controller [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset 
Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset 
Family SATA AHCI Controller [1458:b005]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 34
        Region 0: I/O ports at ff00 [size=8]
        Region 1: I/O ports at fe00 [size=4]
        Region 2: I/O ports at fd00 [size=8]
        Region 3: I/O ports at fc00 [size=4]
        Region 4: I/O ports at fb00 [size=32]
        Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family 
SMBus Controller [8086:1c22] (rev 04)
        Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset 
Family SMBus Controller [1458:5001]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 0500 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 
8400 GS Rev. 3] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
        Subsystem: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:066d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 37
        Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at ef00 [size=128]
        [virtual] Expansion ROM at fa000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau
        Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio 
Controller [10de:0be3] (rev a1)
        Subsystem: NVIDIA Corporation G98 [GeForce 8400GS] [10de:066d]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
        Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 25
        Region 0: I/O ports at de00 [size=256]
        Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169
        Kernel modules: r8169

04:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device 
[1283:8892] (rev 10) (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 18
        Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
        Memory behind bridge: fbd00000-fbdfffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel modules: shpchp

05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
        Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at fbdf8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire_ohci

06:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host 
Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
        Subsystem: Gigabyte Technology Co., Ltd uPD720200 USB 3.0 Host 
Controller [1458:5007]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at fbcfe000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci


** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 17a1:0128  
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical 
Mouse Controller (3-button)
Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
Bus 001 Device 006: ID 1c4f:0016 SiGma Micro 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'unstable'), 
(500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 4.1.0-2-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.1.0-2-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.59
ii  initramfs-tools [linux-initramfs-tool]  0.125
ii  kmod                                    22-1.1
ii  linux-base                              4.3

Versions of packages linux-image-4.1.0-2-686-pae recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2
ii  libc6 [libc6-i686]   2.22-11

Versions of packages linux-image-4.1.0-2-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:6.03+dfsg-14
ii  grub-pc                 2.02~beta2-36
pn  linux-doc-4.1           <none>

Versions of packages linux-image-4.1.0-2-686-pae is related to:
pn  firmware-atheros                         <none>
pn  firmware-bnx2                            <none>
pn  firmware-bnx2x                           <none>
pn  firmware-brcm80211                       <none>
pn  firmware-intelwimax                      <none>
pn  firmware-ipw2x00                         <none>
ii  firmware-ivtv                            20160110-1
pn  firmware-iwlwifi                         <none>
pn  firmware-libertas                        <none>
pn  firmware-linux                           <none>
ii  firmware-linux-nonfree                   20160110-1
ii  firmware-misc-nonfree [firmware-ralink]  20160110-1
pn  firmware-myricom                         <none>
pn  firmware-netxen                          <none>
pn  firmware-qlogic                          <none>
ii  firmware-realtek                         20160110-1
pn  xen-hypervisor                           <none>

-- debconf information excluded

Reply via email to